In version 14.1.8d when I choose this option, a window opens and I can choose files with *.inp extension. A kind of code runs, and in the end I can't see the mesh anywhere.
In version 14.1.9d when I choose this option, I can do the same as the previous step, but in the end, I receive an error message.
What I am doing wrong?
PS: Next, I present the contents of the "test.inp" file, in case someone wanted to reproduce my steps.
Code: Select all
*Heading
** Job name: Job-1 Model name: Model-1
** Generated by: Abaqus/CAE 2017
*Preprint, echo=NO, model=NO, history=NO, contact=NO
**
** PARTS
**
*Part, name=Part-1
*Node
1, 0., 0.
2, 0.200000003, 0.
3, 0.400000006, 0.
4, 0.600000024, 0.
5, 0.800000012, 0.
6, 1., 0.
7, 0., 0.200000003
8, 0.200000003, 0.200000003
9, 0.400000006, 0.200000003
10, 0.600000024, 0.200000003
11, 0.800000012, 0.200000003
12, 1., 0.200000003
13, 0., 0.400000006
14, 0.200000003, 0.400000006
15, 0.400000006, 0.400000006
16, 0.600000024, 0.400000006
17, 0.800000012, 0.400000006
18, 1., 0.400000006
19, 0., 0.600000024
20, 0.200000003, 0.600000024
21, 0.400000006, 0.600000024
22, 0.600000024, 0.600000024
23, 0.800000012, 0.600000024
24, 1., 0.600000024
25, 0., 0.800000012
26, 0.200000003, 0.800000012
27, 0.400000006, 0.800000012
28, 0.600000024, 0.800000012
29, 0.800000012, 0.800000012
30, 1., 0.800000012
31, 0., 1.
32, 0.200000003, 1.
33, 0.400000006, 1.
34, 0.600000024, 1.
35, 0.800000012, 1.
36, 1., 1.
37, 0., 1.20000005
38, 0.200000003, 1.20000005
39, 0.400000006, 1.20000005
40, 0.600000024, 1.20000005
41, 0.800000012, 1.20000005
42, 1., 1.20000005
43, 0., 1.39999998
44, 0.200000003, 1.39999998
45, 0.400000006, 1.39999998
46, 0.600000024, 1.39999998
47, 0.800000012, 1.39999998
48, 1., 1.39999998
49, 0., 1.60000002
50, 0.200000003, 1.60000002
51, 0.400000006, 1.60000002
52, 0.600000024, 1.60000002
53, 0.800000012, 1.60000002
54, 1., 1.60000002
55, 0., 1.79999995
56, 0.200000003, 1.79999995
57, 0.400000006, 1.79999995
58, 0.600000024, 1.79999995
59, 0.800000012, 1.79999995
60, 1., 1.79999995
61, 0., 2.
62, 0.200000003, 2.
63, 0.400000006, 2.
64, 0.600000024, 2.
65, 0.800000012, 2.
66, 1., 2.
*Element, type=CPS4
1, 1, 2, 8, 7
2, 2, 3, 9, 8
3, 3, 4, 10, 9
4, 4, 5, 11, 10
5, 5, 6, 12, 11
6, 7, 8, 14, 13
7, 8, 9, 15, 14
8, 9, 10, 16, 15
9, 10, 11, 17, 16
10, 11, 12, 18, 17
11, 13, 14, 20, 19
12, 14, 15, 21, 20
13, 15, 16, 22, 21
14, 16, 17, 23, 22
15, 17, 18, 24, 23
16, 19, 20, 26, 25
17, 20, 21, 27, 26
18, 21, 22, 28, 27
19, 22, 23, 29, 28
20, 23, 24, 30, 29
21, 25, 26, 32, 31
22, 26, 27, 33, 32
23, 27, 28, 34, 33
24, 28, 29, 35, 34
25, 29, 30, 36, 35
26, 31, 32, 38, 37
27, 32, 33, 39, 38
28, 33, 34, 40, 39
29, 34, 35, 41, 40
30, 35, 36, 42, 41
31, 37, 38, 44, 43
32, 38, 39, 45, 44
33, 39, 40, 46, 45
34, 40, 41, 47, 46
35, 41, 42, 48, 47
36, 43, 44, 50, 49
37, 44, 45, 51, 50
38, 45, 46, 52, 51
39, 46, 47, 53, 52
40, 47, 48, 54, 53
41, 49, 50, 56, 55
42, 50, 51, 57, 56
43, 51, 52, 58, 57
44, 52, 53, 59, 58
45, 53, 54, 60, 59
46, 55, 56, 62, 61
47, 56, 57, 63, 62
48, 57, 58, 64, 63
49, 58, 59, 65, 64
50, 59, 60, 66, 65
*Nset, nset="Rock 1", generate
1, 66, 1
*Elset, elset="Rock 1", generate
1, 50, 1
** Section: Section-1
*Solid Section, elset="Rock 1", material="Rock 1"
1.,
*End Part
**
**
** ASSEMBLY
**
*Assembly, name=Assembly
**
*Instance, name=Part-1-1, part=Part-1
*End Instance
**
*Nset, nset=Loads, instance=Part-1-1
61, 66
*Nset, nset=Set-3, instance=Part-1-1
1,
*Nset, nset=line, instance=Part-1-1, generate
1, 6, 1
*Elset, elset=line, instance=Part-1-1, generate
1, 5, 1
*End Assembly
**
** MATERIALS
**
*Material, name="Rock 1"
*Elastic
3e+07, 0.2
**
** BOUNDARY CONDITIONS
**
** Name: BC-1 Type: Displacement/Rotation
*Boundary
line, 2, 2
** Name: BC-2 Type: Displacement/Rotation
*Boundary
Set-3, 1, 1
** ----------------------------------------------------------------
**
** STEP: Load
**
*Step, name=Load, nlgeom=NO
Load
*Static
1., 1., 1e-05, 1.
**
** LOADS
**
** Name: Loads Type: Concentrated force
*Cload
Loads, 2, -100.
**
** OUTPUT REQUESTS
**
*Restart, write, frequency=0
**
** FIELD OUTPUT: F-Output-1
**
*Output, field, variable=PRESELECT
**
** HISTORY OUTPUT: H-Output-1
**
*Output, history, variable=PRESELECT
*End Step