Hey GiD Team,
I was working on GiD 10.0.3 previously and my problemtype worked fine.
I am trying to use the new version 10.0.4, but when I hit Calcalate within
my problemtype, either GiD crashes or it says that the analysis is complete
without performing any analysis (basically, the *.win.bat file is not
executed).
Do you think I am doing something wrong, or this is a bug?
Thanks,
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20101111/a39873ff/attachment.htm
[GiDlist] GiD 10.0.4
Moderator: GiD Team
[GiDlist] GiD 10.0.4
Dear Shiram,
Which GiD version are your talking about? Windows-x32, Windows-x64, other platform?
If you have dowloaded the Windows version before the 02-11-2010, please re-download and install it again
(this problem has been fixed, it was an unappropiated version of command.exe included with GiD)
I have re-downloaded and installed the 10.0.4 win-32 version now, and tested a simple case (an square with a material applied)
with the problemtype Examples-cmas2d problemtype (installed by default) and has been started well and the results were created.
Regards
Enrique
----- Original Message -----
From: Shriram
To: gidlist at listas.cimne.upc.edu
Sent: Thursday, November 11, 2010 9:21 PM
Subject: [GiDlist] GiD 10.0.4
Hey GiD Team,
I was working on GiD 10.0.3 previously and my problemtype worked fine.
I am trying to use the new version 10.0.4, but when I hit Calcalate within my problemtype, either GiD crashes or it says that the analysis is complete without performing any analysis (basically, the *.win.bat file is not executed).
Do you think I am doing something wrong, or this is a bug?
Thanks,
------------------------------------------------------------------------------
_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20101111/96567795/attachment.htm
Which GiD version are your talking about? Windows-x32, Windows-x64, other platform?
If you have dowloaded the Windows version before the 02-11-2010, please re-download and install it again
(this problem has been fixed, it was an unappropiated version of command.exe included with GiD)
I have re-downloaded and installed the 10.0.4 win-32 version now, and tested a simple case (an square with a material applied)
with the problemtype Examples-cmas2d problemtype (installed by default) and has been started well and the results were created.
Regards
Enrique
----- Original Message -----
From: Shriram
To: gidlist at listas.cimne.upc.edu
Sent: Thursday, November 11, 2010 9:21 PM
Subject: [GiDlist] GiD 10.0.4
Hey GiD Team,
I was working on GiD 10.0.3 previously and my problemtype worked fine.
I am trying to use the new version 10.0.4, but when I hit Calcalate within my problemtype, either GiD crashes or it says that the analysis is complete without performing any analysis (basically, the *.win.bat file is not executed).
Do you think I am doing something wrong, or this is a bug?
Thanks,
------------------------------------------------------------------------------
_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20101111/96567795/attachment.htm
[GiDlist] GiD 10.0.4
Thanks for the reply Enrique.
I downloaded the installation again now and it works this time. I think I
had the previous version and I didn't know that it was uploaded again.
Thanks!
From: gidlist-bounces at listas.cimne.upc.edu
[mailto:gidlist-bounces at listas.cimne.upc.edu] On Behalf Of Enrique Escolano
Sent: Thursday, November 11, 2010 4:18 PM
To: gidlist at listas.cimne.upc.edu
Subject: Re: [GiDlist] GiD 10.0.4
Dear Shiram,
Which GiD version are your talking about? Windows-x32, Windows-x64, other
platform?
If you have dowloaded the Windows version before the 02-11-2010, please
re-download and install it again
(this problem has been fixed, it was an unappropiated version of command.exe
included with GiD)
I have re-downloaded and installed the 10.0.4 win-32 version now, and tested
a simple case (an square with a material applied)
with the problemtype Examples-cmas2d problemtype (installed by default) and
has been started well and the results were created.
Regards
Enrique
----- Original Message -----
From: Shriram mailto:madapusi at nanotechsys.com
To: gidlist at listas.cimne.upc.edu
Sent: Thursday, November 11, 2010 9:21 PM
Subject: [GiDlist] GiD 10.0.4
Hey GiD Team,
I was working on GiD 10.0.3 previously and my problemtype worked fine.
I am trying to use the new version 10.0.4, but when I hit Calcalate within
my problemtype, either GiD crashes or it says that the analysis is complete
without performing any analysis (basically, the *.win.bat file is not
executed).
Do you think I am doing something wrong, or this is a bug?
Thanks,
_____
_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20101111/047037c0/attachment.htm
I downloaded the installation again now and it works this time. I think I
had the previous version and I didn't know that it was uploaded again.
Thanks!
From: gidlist-bounces at listas.cimne.upc.edu
[mailto:gidlist-bounces at listas.cimne.upc.edu] On Behalf Of Enrique Escolano
Sent: Thursday, November 11, 2010 4:18 PM
To: gidlist at listas.cimne.upc.edu
Subject: Re: [GiDlist] GiD 10.0.4
Dear Shiram,
Which GiD version are your talking about? Windows-x32, Windows-x64, other
platform?
If you have dowloaded the Windows version before the 02-11-2010, please
re-download and install it again
(this problem has been fixed, it was an unappropiated version of command.exe
included with GiD)
I have re-downloaded and installed the 10.0.4 win-32 version now, and tested
a simple case (an square with a material applied)
with the problemtype Examples-cmas2d problemtype (installed by default) and
has been started well and the results were created.
Regards
Enrique
----- Original Message -----
From: Shriram mailto:madapusi at nanotechsys.com
To: gidlist at listas.cimne.upc.edu
Sent: Thursday, November 11, 2010 9:21 PM
Subject: [GiDlist] GiD 10.0.4
Hey GiD Team,
I was working on GiD 10.0.3 previously and my problemtype worked fine.
I am trying to use the new version 10.0.4, but when I hit Calcalate within
my problemtype, either GiD crashes or it says that the analysis is complete
without performing any analysis (basically, the *.win.bat file is not
executed).
Do you think I am doing something wrong, or this is a bug?
Thanks,
_____
_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20101111/047037c0/attachment.htm