Is there any functions to see the stress on a particular layer (typically
medium, upper, lower).
How to define the stress components across the thickness in a result file
for Gid.
Thanks
________________________________________________________________
Guy HUBERT Mailto:hubert at deltacad.fr
Tel direct : +33 (0)3 44 23 52 99 mobile: 06 76 80 03 42
DeltaCAD
Centre de Transfert - 66 Avenue de Landshut
60200 COMPIEGNE (FRANCE)
Tel : +33 (0)3 44 23 46 54 - Fax : +33 (0)3 44 23 46 31
Web : http://www.deltacad.fr
[GiDlist] Post Processing across shell thickness
Moderator: GiD Team
[GiDlist] Post Processing across shell thickness
what do you mean with ' see the stress on a particular layer (typically
medium, upper, lower)' ?
i understand that you have several stresses for one node/element and
want to see one of them ( medium stress, upper stress, lower stress).
what you can do is enter these three stresses with their own names:
for instance :
Result "medium stress" "load case" 1.0 Matrix OnNodes
Values
...
End Values
Result "upper stress" "load case" 1.0 Matrix OnNodes
Values
...
End Values
Result "lower stress" "load case" 1.0 Matrix OnNodes
Values
...
End Values
and just select throught the menus/windows the one you want to see.
can you elaborate on this:
How to define the stress components across the thickness in a result file
for Gid.
?
it is not almost the same as above?
miguel
Guy HUBERT wrote:
Is there any functions to see the stress on a particular layer (typically
medium, upper, lower).
How to define the stress components across the thickness in a result file
for Gid.
Thanks
________________________________________________________________
Guy HUBERT Mailto:hubert at deltacad.fr
Tel direct : +33 (0)3 44 23 52 99 mobile: 06 76 80 03 42
DeltaCAD
Centre de Transfert - 66 Avenue de Landshut
60200 COMPIEGNE (FRANCE)
Tel : +33 (0)3 44 23 46 54 - Fax : +33 (0)3 44 23 46 31
Web : http://www.deltacad.fr
_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist
--
--------------------------------------------------------------------------------
Miguel A. Pasenau de Riera miguel at cimne.upc.es http://gid.cimne.upc.es
medium, upper, lower)' ?
i understand that you have several stresses for one node/element and
want to see one of them ( medium stress, upper stress, lower stress).
what you can do is enter these three stresses with their own names:
for instance :
Result "medium stress" "load case" 1.0 Matrix OnNodes
Values
...
End Values
Result "upper stress" "load case" 1.0 Matrix OnNodes
Values
...
End Values
Result "lower stress" "load case" 1.0 Matrix OnNodes
Values
...
End Values
and just select throught the menus/windows the one you want to see.
can you elaborate on this:
How to define the stress components across the thickness in a result file
for Gid.
?
it is not almost the same as above?
miguel
Guy HUBERT wrote:
Is there any functions to see the stress on a particular layer (typically
medium, upper, lower).
How to define the stress components across the thickness in a result file
for Gid.
Thanks
________________________________________________________________
Guy HUBERT Mailto:hubert at deltacad.fr
Tel direct : +33 (0)3 44 23 52 99 mobile: 06 76 80 03 42
DeltaCAD
Centre de Transfert - 66 Avenue de Landshut
60200 COMPIEGNE (FRANCE)
Tel : +33 (0)3 44 23 46 54 - Fax : +33 (0)3 44 23 46 31
Web : http://www.deltacad.fr
_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist
--
--------------------------------------------------------------------------------
Miguel A. Pasenau de Riera miguel at cimne.upc.es http://gid.cimne.upc.es