Hello,
in the stress post processing I visualize the Von "Mises stress"
and I would like to do it also for the Tresca one.
max((S1 - S2), (S2 - S3), (S3 - S1)) ...
GiD in post processing calculates the principal stresses S1-S3
(autovalues of the stress tensor) automatically, is it possible to
have access to those quantities in some way?
Regards
Andrea Calaon
Ashurst Lodge, Ashurst
Southampton, Hampshire
SO40 7AA, UK
Tel. office: +44 23 80 293 223
Fax office: +44 23 80 292 853
Mobile: +44 7766 488 225
E-mail: andrea at beasy.com
[GiDlist] Tresca stress norm
Moderator: GiD Team
[GiDlist] Tresca stress norm
If is planned a task to create in postprocess a new result, as an
arithmetical combination of other results,
but by now fis feature is not available.
It is needed to write explicit in the results file (*.flavia.res) this
"Tresca stress" as an aditional scalar result.
Enrique Escolano
----- Original Message -----
From: "Andrea Calaon" andrea at beasy.com
To: gidlist at gatxan.cimne.upc.es
Sent: Tuesday, April 01, 2003 12:56 PM
Subject: [GiDlist] Tresca stress norm
Hello,
in the stress post processing I visualize the Von "Mises stress"
and I would like to do it also for the Tresca one.
max((S1 - S2), (S2 - S3), (S3 - S1)) ...
GiD in post processing calculates the principal stresses S1-S3
(autovalues of the stress tensor) automatically, is it possible to
have access to those quantities in some way?
Regards
Andrea Calaon
Ashurst Lodge, Ashurst
Southampton, Hampshire
SO40 7AA, UK
Tel. office: +44 23 80 293 223
Fax office: +44 23 80 292 853
Mobile: +44 7766 488 225
E-mail: andrea at beasy.com
_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist
arithmetical combination of other results,
but by now fis feature is not available.
It is needed to write explicit in the results file (*.flavia.res) this
"Tresca stress" as an aditional scalar result.
Enrique Escolano
----- Original Message -----
From: "Andrea Calaon" andrea at beasy.com
To: gidlist at gatxan.cimne.upc.es
Sent: Tuesday, April 01, 2003 12:56 PM
Subject: [GiDlist] Tresca stress norm
Hello,
in the stress post processing I visualize the Von "Mises stress"
and I would like to do it also for the Tresca one.
max((S1 - S2), (S2 - S3), (S3 - S1)) ...
GiD in post processing calculates the principal stresses S1-S3
(autovalues of the stress tensor) automatically, is it possible to
have access to those quantities in some way?
Regards
Andrea Calaon
Ashurst Lodge, Ashurst
Southampton, Hampshire
SO40 7AA, UK
Tel. office: +44 23 80 293 223
Fax office: +44 23 80 292 853
Mobile: +44 7766 488 225
E-mail: andrea at beasy.com
_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist