Dear All,
I'm having problems with reading TECPLOT files into GID (Ver.7.2). Even the
simplest TECPLOT data set fails to read correctly. To illustrate my problem
here's a simple two-element (hexahedral) data set in TECPLOT FE format (the
data file is also attached to this email).
TITLE = "Sample data set"
VARIABLES = "X", "Y", "Z", "Value"
ZONE T="Sample 2 hex elements" N= 12, E= 2, F=FEPOINT, ET=BRICK
0.0 0.0 0.0 1.0
1.0 0.0 0.0 3.0
1.0 1.0 0.0 4.0
0.0 1.0 0.0 2.0
0.0 0.0 1.0 1.5
1.0 0.0 1.0 3.5
1.0 1.0 1.0 4.5
0.0 1.0 1.0 2.5
2.0 0.0 0.0 6.0
2.0 1.0 0.0 8.0
2.0 0.0 1.0 9.0
2.0 1.0 1.0 12.0
1 2 3 4 5 6 7 8
2 9 10 3 6 11 12 7
This file reads in correctly into TECPLOT Ver. 9.2 (see the attached gif
files Tecplot_grid.gif and Tecplot_values.gif), but it reads incorrectly
into GID (see the GID_input file). GID somehow misses the last nodal point
12. Instead it connects all the edges going to the node 12 with the node 1.
I'm new to GID, perhaps I'm doing something wrong; please advice.
with regards
M.Lipinski
----------------------------------------------------------------------------
----
Dr. D.M. Lipinski
private:
Office: MAGMA GmbH
Hastenrather Schule 4
Kackertstr. 11
D-52249 Eschweiler
D-52072 Aachen
Germany
Germany
Tel.: +02403-504872
Tel.: +0241-889010
Fax: +0241-8890160
email: dml at ginko.de
email: dml at magmasoft.de
----------------------------------------------------------------------------
----
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20030116/4d8585bd/attachment.htm
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/octet-stream
Size: 862 bytes
Desc: not available
Url : http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20030116/4d8585bd/attachment.obj
-------------- next part --------------
A non-text attachment was scrubbed...
Name: result.dat
Type: application/octet-stream
Size: 456 bytes
Desc: not available
Url : http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20030116/4d8585bd/attachment-0001.obj
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Tecplot_grid.gif
Type: application/octet-stream
Size: 49206 bytes
Desc: not available
Url : http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20030116/4d8585bd/attachment-0002.obj
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Tecplot_values.gif
Type: application/octet-stream
Size: 50371 bytes
Desc: not available
Url : http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20030116/4d8585bd/attachment-0003.obj
-------------- next part --------------
A non-text attachment was scrubbed...
Name: GID_input.gif
Type: application/octet-stream
Size: 24816 bytes
Desc: not available
Url : http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20030116/4d8585bd/attachment-0004.obj
[GiDlist] GID 7.2 problems with TECPLOT input
Moderator: GiD Team
[GiDlist] GID 7.2 problems with TECPLOT input
Yes, you're right, there is a bug in GiD while reading bricks in
tecplot format ( it doesn't read the seventh node).
solved for the next version
miguel
"D.M. Lipinski" wrote:
Dear All,
I'm having problems with reading TECPLOT files into GID (Ver.7.2). Even the simplest TECPLOT data set fails to read correctly. To
illustrate my problem here's a simple two-element (hexahedral) data set in TECPLOT FE format (the data file is also attached to
this email).
TITLE = "Sample data set"
VARIABLES = "X", "Y", "Z", "Value"
ZONE T="Sample 2 hex elements" N= 12, E= 2, F=FEPOINT, ET=BRICK
0.0 0.0 0.0 1.0
1.0 0.0 0.0 3.0
1.0 1.0 0.0 4.0
0.0 1.0 0.0 2.0
0.0 0.0 1.0 1.5
1.0 0.0 1.0 3.5
1.0 1.0 1.0 4.5
0.0 1.0 1.0 2.5
2.0 0.0 0.0 6.0
2.0 1.0 0.0 8.0
2.0 0.0 1.0 9.0
2.0 1.0 1.0 12.0
1 2 3 4 5 6 7 8
2 9 10 3 6 11 12 7
This file reads in correctly into TECPLOT Ver. 9.2 (see the attached gif files Tecplot_grid.gif and Tecplot_values.gif), but it
reads incorrectly into GID (see the GID_input file). GID somehow misses the last nodal point 12. Instead it connects all the edges
going to the node 12 with the node 1.
I'm new to GID, perhaps I'm doing something wrong; please advice.
with regards
M.Lipinski
----------------------------------------------------------------------------------------------------------------------------------
Dr. D.M. Lipinski
private: Office: MAGMA GmbH
Hastenrather Schule 4 Kackertstr. 11
D-52249 Eschweiler D-52072 Aachen
Germany Germany
Tel.: +02403-504872 Tel.: +0241-889010
Fax: +0241-8890160
email: dml at ginko.de email: dml at magmasoft.de
----------------------------------------------------------------------------------------------------------------------------------
Name: result.dat
result.dat Type: unspecified type (application/octet-stream)
Encoding: 7bit
Name: Tecplot_grid.gif
Tecplot_grid.gif Type: GIF Image (image/gif)
Encoding: base64
Name: Tecplot_values.gif
Tecplot_values.gif Type: GIF Image (image/gif)
Encoding: base64
Name: GID_input.gif
GID_input.gif Type: GIF Image (image/gif)
Encoding: base64
--
--------------------------------------------------------------------------------
Miguel A. de Riera Pasenau miguel at cimne.upc.es http://gid.cimne.upc.es
tecplot format ( it doesn't read the seventh node).
solved for the next version
miguel
"D.M. Lipinski" wrote:
Dear All,
I'm having problems with reading TECPLOT files into GID (Ver.7.2). Even the simplest TECPLOT data set fails to read correctly. To
illustrate my problem here's a simple two-element (hexahedral) data set in TECPLOT FE format (the data file is also attached to
this email).
TITLE = "Sample data set"
VARIABLES = "X", "Y", "Z", "Value"
ZONE T="Sample 2 hex elements" N= 12, E= 2, F=FEPOINT, ET=BRICK
0.0 0.0 0.0 1.0
1.0 0.0 0.0 3.0
1.0 1.0 0.0 4.0
0.0 1.0 0.0 2.0
0.0 0.0 1.0 1.5
1.0 0.0 1.0 3.5
1.0 1.0 1.0 4.5
0.0 1.0 1.0 2.5
2.0 0.0 0.0 6.0
2.0 1.0 0.0 8.0
2.0 0.0 1.0 9.0
2.0 1.0 1.0 12.0
1 2 3 4 5 6 7 8
2 9 10 3 6 11 12 7
This file reads in correctly into TECPLOT Ver. 9.2 (see the attached gif files Tecplot_grid.gif and Tecplot_values.gif), but it
reads incorrectly into GID (see the GID_input file). GID somehow misses the last nodal point 12. Instead it connects all the edges
going to the node 12 with the node 1.
I'm new to GID, perhaps I'm doing something wrong; please advice.
with regards
M.Lipinski
----------------------------------------------------------------------------------------------------------------------------------
Dr. D.M. Lipinski
private: Office: MAGMA GmbH
Hastenrather Schule 4 Kackertstr. 11
D-52249 Eschweiler D-52072 Aachen
Germany Germany
Tel.: +02403-504872 Tel.: +0241-889010
Fax: +0241-8890160
email: dml at ginko.de email: dml at magmasoft.de
----------------------------------------------------------------------------------------------------------------------------------
Name: result.dat
result.dat Type: unspecified type (application/octet-stream)
Encoding: 7bit
Name: Tecplot_grid.gif
Tecplot_grid.gif Type: GIF Image (image/gif)
Encoding: base64
Name: Tecplot_values.gif
Tecplot_values.gif Type: GIF Image (image/gif)
Encoding: base64
Name: GID_input.gif
GID_input.gif Type: GIF Image (image/gif)
Encoding: base64
--
--------------------------------------------------------------------------------
Miguel A. de Riera Pasenau miguel at cimne.upc.es http://gid.cimne.upc.es