[GiDlist] Structured Prisma

Moderator: GiD Team

Post Reply
Kendon, Tim E

[GiDlist] Structured Prisma

Post by Kendon, Tim E »

Dear Abel

I am using version 7.2
Prisma are listed under the Meshing-ElemType menu, so I figure there must be some functionality for them.

Cheers
Tim

-----Original Message-----
From: gidlist-admin at gatxan.cimne.upc.edu on behalf of Abel Coll
Sent: Wed 11/2/2005 8:26 AM
To: gidlist at gatxan.cimne.upc.edu
Subject: Re: [GiDlist] Structured Prisma

Structured Prisma
Hello, Tim,

Which GiD version are you using?

Abel Coll


----- Original Message -----
From: Kendon, Tim E
To: gidlist at gatxan.cimne.upc.es
Sent: Tuesday, November 01, 2005 3:36 PM
Subject: [GiDlist] Structured Prisma


Dear Gidlist

I am trying to mesh two volumes; one that is discretised using structured prisma; and one that is discretised using unstructured tetrahedral. These two volumes should be conforming

Two standard error messages within Gid are

1. "Non-structured volumes can only be tetrahedra or only points".

2. "Structured volumes can only be hexahedra"

How exactly can I use Prisma then? All my surfaces are Nurbs.

Apologies if this is a naive question.

Many thanks in advance
Tim Kendon



-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/ms-tnef
Size: 2912 bytes
Desc: not available
Url : http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20051102/8d1bce5d/attachment.bin
User avatar
abelcs
Posts: 146
Joined: Mon Oct 13, 2014 9:14 am

[GiDlist] Structured Prisma

Post by abelcs »

Hi, Tim,

As you said, it is possible to select Prism as element type, but it had only
sense for contact volumes in version 7.2.
In lasts beta versions it has been added the option of meshing standard
volumes with prisms as element type (only prismatic volumes).
You can download the last GiD beta version from the web page
(www.gidhome.com).

Regards

Abel Coll



----- Original Message -----
From: "Kendon, Tim E" t.kendon at imperial.ac.uk
To: gidlist at gatxan.cimne.upc.edu
Sent: Wednesday, November 02, 2005 9:45 AM
Subject: RE: [GiDlist] Structured Prisma


Dear Abel

I am using version 7.2
Prisma are listed under the Meshing-ElemType menu, so I figure there must
be some functionality for them.

Cheers
Tim

-----Original Message-----
From: gidlist-admin at gatxan.cimne.upc.edu on behalf of Abel Coll
Sent: Wed 11/2/2005 8:26 AM
To: gidlist at gatxan.cimne.upc.edu
Subject: Re: [GiDlist] Structured Prisma

Structured Prisma
Hello, Tim,

Which GiD version are you using?

Abel Coll


----- Original Message -----
From: Kendon, Tim E
To: gidlist at gatxan.cimne.upc.es
Sent: Tuesday, November 01, 2005 3:36 PM
Subject: [GiDlist] Structured Prisma


Dear Gidlist

I am trying to mesh two volumes; one that is discretised using structured
prisma; and one that is discretised using unstructured tetrahedral. These
two volumes should be conforming

Two standard error messages within Gid are

1. "Non-structured volumes can only be tetrahedra or only points".

2. "Structured volumes can only be hexahedra"

How exactly can I use Prisma then? All my surfaces are Nurbs.

Apologies if this is a naive question.

Many thanks in advance
Tim Kendon
Post Reply