Hello Martin,
We have detected a bug in the internal definition of the surface inside GiD,
but we need to create the surface following the same steps as you to be able
to correct it. Please, could you send us the initial mesh from which you
have created the SurfMesh?
Regards,
ABEL
__________________________________________________________
Abel Coll Sans
CIMNE - International Center for Numerical Methods in Engineering
Office C2 - C1Building - Campus Nord UPC
Gran Capità s/n, 08034 Barcelona
Tfn: 34 - 93 401 74 03 Fax: 34 - 93 401 65 17
abelcs at cimne.upc.edu
_________________________________________________________
-----Mensaje original-----
De: gidlist-admin at gatxan.cimne.upc.edu
[mailto:gidlist-admin at gatxan.cimne.upc.edu] En nombre de MArtin Koske
Enviado el: viernes, 17 de noviembre de 2006 15:21
Para: gidlist at gatxan.cimne.upc.es
Asunto: [GiDlist] [Problem] couldn´t map this point
Hi,
i try to make some mesh for ELMER and your programm worked very well. I need
the
mesh for some blood simulations that i do in a projekt in my univesity.
but now i have a problem i never had before.
By pressing the button "generate mesh" i get the message
Couldn´t map this point
????
What can i do that it will work?
i send a picture of my monitor and the problem file and hope you can help
me!
regards martin
[GiDlist] opensees gid
Moderator: GiD Team
[GiDlist] RE: [GiDlist] [Problem] couldn´t map this poi
hello Abel,
this is the original mesh.
it is an .stl file.
i converted it with
create - surface mesh
create - Volume - By contour
Regards Martin
-------------- next part --------------
A non-text attachment was scrubbed...
Name: first9.rar
Type: application/octet-stream
Size: 226647 bytes
Desc: not available
Url : http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20061121/8892d9d2/attachment.obj
this is the original mesh.
it is an .stl file.
i converted it with
create - surface mesh
create - Volume - By contour
Regards Martin
-------------- next part --------------
A non-text attachment was scrubbed...
Name: first9.rar
Type: application/octet-stream
Size: 226647 bytes
Desc: not available
Url : http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20061121/8892d9d2/attachment.obj
[GiDlist] RE: [GiDlist] [Problem] couldn´t map this poi
Hi Martin,
Finally we have found the bug and we have fixed it. Next beta and official
versions won't have this problem no more.
Thank you so much for notifying us this irregular behaviour.
Regards,
ABEL
P.D: I have corrected the GiD model you sent, and GiD is able to mesh all
its surfaces. If you want it, just send me an e-mail and I will send it to
you.
__________________________________________________________
Abel Coll Sans
CIMNE - International Center for Numerical Methods in Engineering
Office C2 - C1Building - Campus Nord UPC
Gran Capità s/n, 08034 Barcelona
Tfn: 34 - 93 401 74 03 Fax: 34 - 93 401 65 17
abelcs at cimne.upc.edu
_________________________________________________________
-----Mensaje original-----
De: gidlist-admin at gatxan.cimne.upc.edu
[mailto:gidlist-admin at gatxan.cimne.upc.edu] En nombre de MArtin Koske
Enviado el: martes, 21 de noviembre de 2006 12:54
Para: gidlist at gatxan.cimne.upc.edu
Asunto: Re: [GiDlist] RE: [GiDlist] [Problem] couldn´t map this point
hello Abel,
this is the original mesh.
it is an .stl file.
i converted it with
create - surface mesh
create - Volume - By contour
Regards Martin
Finally we have found the bug and we have fixed it. Next beta and official
versions won't have this problem no more.
Thank you so much for notifying us this irregular behaviour.
Regards,
ABEL
P.D: I have corrected the GiD model you sent, and GiD is able to mesh all
its surfaces. If you want it, just send me an e-mail and I will send it to
you.
__________________________________________________________
Abel Coll Sans
CIMNE - International Center for Numerical Methods in Engineering
Office C2 - C1Building - Campus Nord UPC
Gran Capità s/n, 08034 Barcelona
Tfn: 34 - 93 401 74 03 Fax: 34 - 93 401 65 17
abelcs at cimne.upc.edu
_________________________________________________________
-----Mensaje original-----
De: gidlist-admin at gatxan.cimne.upc.edu
[mailto:gidlist-admin at gatxan.cimne.upc.edu] En nombre de MArtin Koske
Enviado el: martes, 21 de noviembre de 2006 12:54
Para: gidlist at gatxan.cimne.upc.edu
Asunto: Re: [GiDlist] RE: [GiDlist] [Problem] couldn´t map this point
hello Abel,
this is the original mesh.
it is an .stl file.
i converted it with
create - surface mesh
create - Volume - By contour
Regards Martin
[GiDlist] RE: [GiDlist] [Problem] couldn´t map this poi
Hi Abel,
can you send me this corrected gid model.
thanks for reparing it.
regards Martin
Zitat von Abel Coll abelcs at cimne.upc.edu:
Hi Martin,
Finally we have found the bug and we have fixed it. Next beta and official
versions won't have this problem no more.
Thank you so much for notifying us this irregular behaviour.
Regards,
ABEL
P.D: I have corrected the GiD model you sent, and GiD is able to mesh all
its surfaces. If you want it, just send me an e-mail and I will send it to
you.
__________________________________________________________
Abel Coll Sans
CIMNE - International Center for Numerical Methods in Engineering
Office C2 - C1Building - Campus Nord UPC
Gran Capità s/n, 08034 Barcelona
Tfn: 34 - 93 401 74 03 Fax: 34 - 93 401 65 17
abelcs at cimne.upc.edu
_________________________________________________________
-----Mensaje original-----
De: gidlist-admin at gatxan.cimne.upc.edu
[mailto:gidlist-admin at gatxan.cimne.upc.edu] En nombre de MArtin Koske
Enviado el: martes, 21 de noviembre de 2006 12:54
Para: gidlist at gatxan.cimne.upc.edu
Asunto: Re: [GiDlist] RE: [GiDlist] [Problem] couldn´t map this point
hello Abel,
this is the original mesh.
it is an .stl file.
i converted it with
create - surface mesh
create - Volume - By contour
Regards Martin
_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist
--
can you send me this corrected gid model.
thanks for reparing it.
regards Martin
Zitat von Abel Coll abelcs at cimne.upc.edu:
Hi Martin,
Finally we have found the bug and we have fixed it. Next beta and official
versions won't have this problem no more.
Thank you so much for notifying us this irregular behaviour.
Regards,
ABEL
P.D: I have corrected the GiD model you sent, and GiD is able to mesh all
its surfaces. If you want it, just send me an e-mail and I will send it to
you.
__________________________________________________________
Abel Coll Sans
CIMNE - International Center for Numerical Methods in Engineering
Office C2 - C1Building - Campus Nord UPC
Gran Capità s/n, 08034 Barcelona
Tfn: 34 - 93 401 74 03 Fax: 34 - 93 401 65 17
abelcs at cimne.upc.edu
_________________________________________________________
-----Mensaje original-----
De: gidlist-admin at gatxan.cimne.upc.edu
[mailto:gidlist-admin at gatxan.cimne.upc.edu] En nombre de MArtin Koske
Enviado el: martes, 21 de noviembre de 2006 12:54
Para: gidlist at gatxan.cimne.upc.edu
Asunto: Re: [GiDlist] RE: [GiDlist] [Problem] couldn´t map this point
hello Abel,
this is the original mesh.
it is an .stl file.
i converted it with
create - surface mesh
create - Volume - By contour
Regards Martin
_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist
--
[GiDlist] RE: [GiDlist] [Problem] couldn´t map this poi
Here you are.
ABEL
__________________________________________________________
Abel Coll Sans
CIMNE - International Center for Numerical Methods in Engineering
Office C2 - C1Building - Campus Nord UPC
Gran Capità s/n, 08034 Barcelona
Tfn: 34 - 93 401 74 03 Fax: 34 - 93 401 65 17
abelcs at cimne.upc.edu
_________________________________________________________
-----Mensaje original-----
De: gidlist-admin at gatxan.cimne.upc.edu
[mailto:gidlist-admin at gatxan.cimne.upc.edu] En nombre de MArtin Koske
Enviado el: martes, 28 de noviembre de 2006 15:17
Para: gidlist at gatxan.cimne.upc.edu
Asunto: Re: [GiDlist] RE: [GiDlist] [Problem] couldn´t map this point
Hi Abel,
can you send me this corrected gid model.
thanks for reparing it.
regards Martin
Zitat von Abel Coll abelcs at cimne.upc.edu:
Hi Martin,
Finally we have found the bug and we have fixed it. Next beta and official
versions won't have this problem no more.
Thank you so much for notifying us this irregular behaviour.
Regards,
ABEL
P.D: I have corrected the GiD model you sent, and GiD is able to mesh all
its surfaces. If you want it, just send me an e-mail and I will send it to
you.
__________________________________________________________
Abel Coll Sans
CIMNE - International Center for Numerical Methods in Engineering
Office C2 - C1Building - Campus Nord UPC
Gran Capità s/n, 08034 Barcelona
Tfn: 34 - 93 401 74 03 Fax: 34 - 93 401 65 17
abelcs at cimne.upc.edu
_________________________________________________________
-----Mensaje original-----
De: gidlist-admin at gatxan.cimne.upc.edu
[mailto:gidlist-admin at gatxan.cimne.upc.edu] En nombre de MArtin Koske
Enviado el: martes, 21 de noviembre de 2006 12:54
Para: gidlist at gatxan.cimne.upc.edu
Asunto: Re: [GiDlist] RE: [GiDlist] [Problem] couldn´t map this point
hello Abel,
this is the original mesh.
it is an .stl file.
i converted it with
create - surface mesh
create - Volume - By contour
Regards Martin
_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist
--
_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist
-------------- next part --------------
A non-text attachment was scrubbed...
Name: surfmesh_abel.gid.zip
Type: application/octet-stream
Size: 433979 bytes
Desc: not available
Url : http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20061128/7a01dbca/attachment.obj
ABEL
__________________________________________________________
Abel Coll Sans
CIMNE - International Center for Numerical Methods in Engineering
Office C2 - C1Building - Campus Nord UPC
Gran Capità s/n, 08034 Barcelona
Tfn: 34 - 93 401 74 03 Fax: 34 - 93 401 65 17
abelcs at cimne.upc.edu
_________________________________________________________
-----Mensaje original-----
De: gidlist-admin at gatxan.cimne.upc.edu
[mailto:gidlist-admin at gatxan.cimne.upc.edu] En nombre de MArtin Koske
Enviado el: martes, 28 de noviembre de 2006 15:17
Para: gidlist at gatxan.cimne.upc.edu
Asunto: Re: [GiDlist] RE: [GiDlist] [Problem] couldn´t map this point
Hi Abel,
can you send me this corrected gid model.
thanks for reparing it.
regards Martin
Zitat von Abel Coll abelcs at cimne.upc.edu:
Hi Martin,
Finally we have found the bug and we have fixed it. Next beta and official
versions won't have this problem no more.
Thank you so much for notifying us this irregular behaviour.
Regards,
ABEL
P.D: I have corrected the GiD model you sent, and GiD is able to mesh all
its surfaces. If you want it, just send me an e-mail and I will send it to
you.
__________________________________________________________
Abel Coll Sans
CIMNE - International Center for Numerical Methods in Engineering
Office C2 - C1Building - Campus Nord UPC
Gran Capità s/n, 08034 Barcelona
Tfn: 34 - 93 401 74 03 Fax: 34 - 93 401 65 17
abelcs at cimne.upc.edu
_________________________________________________________
-----Mensaje original-----
De: gidlist-admin at gatxan.cimne.upc.edu
[mailto:gidlist-admin at gatxan.cimne.upc.edu] En nombre de MArtin Koske
Enviado el: martes, 21 de noviembre de 2006 12:54
Para: gidlist at gatxan.cimne.upc.edu
Asunto: Re: [GiDlist] RE: [GiDlist] [Problem] couldn´t map this point
hello Abel,
this is the original mesh.
it is an .stl file.
i converted it with
create - surface mesh
create - Volume - By contour
Regards Martin
_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist
--
_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist
-------------- next part --------------
A non-text attachment was scrubbed...
Name: surfmesh_abel.gid.zip
Type: application/octet-stream
Size: 433979 bytes
Desc: not available
Url : http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20061128/7a01dbca/attachment.obj