Plotting results only on specific domain portion

Moderator: GiD Team

Post Reply
Carlo
Posts: 4
Joined: Thu Oct 13, 2016 1:23 pm

Plotting results only on specific domain portion

Post by Carlo »

Hi

I need to exclude a portion of the domain an then plot the stress using "contour fill" on the remaining part.
I hope that by excluding a part of domain the maximum and minimun value of legend vould be define accordingly.
Is it possible to do that?
User avatar
escolano
Posts: 1918
Joined: Sun Sep 05, 1982 10:51 pm

Re: Plotting results only on specific domain portion

Post by escolano »

Do you mean to not draw the stress contour-fill with value above or below a threshold user value?
You can do it pressing in the "postprocess toolbar" the red and/or blue buttons, to set a maximum/minimum value.

Values out of range will be represented depending on Utilities->Preferences...
Postprocess->Contour fill an lines, Out maximum/minimum color (could be set as transparent, or black, or the same value of the maximum,...)

To disable this trimming of the contour fill, press the rainbow scale button of the "postprocess toolbar"
User avatar
miguel
Posts: 361
Joined: Thu Sep 25, 2014 9:04 am

Re: Plotting results only on specific domain portion

Post by miguel »

Hi Carlo,
on the new version GiD 14, you can enable or disable the results visualization on each set independently:
gid14switchResultVisualizationPerSet.png
gid14switchResultVisualizationPerSet.png (88.34 KiB) Viewed 6109 times
You can download the latest GiD 14 version from here https://www.gidhome.com/download/official-versions/
Best
Post Reply