hi,
I would like more information about the formating of the values for the Gausspoint in the post-processing file
My problem is that, in the post-processor the result I present 6 cases of stress, but SXX and SXY is wrong but the other values are ok.. All values are fine in the archive ".res"
I'm using GID 13.0.2 for Mac
MacOs Sierra v 10.12.6
GaussPoints "H8" ElemType Hexahedra
Number of Gauss Points: 8
Natural Coordinates: Given
-0.577350269 -0.577350269 -0.577350269
-0.577350269 -0.577350269 0.577350269
-0.577350269 0.577350269 -0.577350269
-0.577350269 0.577350269 0.577350269
0.577350269 -0.577350269 -0.577350269
0.577350269 -0.577350269 0.577350269
0.577350269 0.577350269 -0.577350269
0.577350269 0.577350269 0.577350269
End GaussPoints
Only 1 element Result
Result "Solid Stress" "StaticAnalysis" 1 Matrix OnGaussPoints "H8"
ComponentNames "Sxx", "Syy", "Szz", "Sxy", "Syz", "Sxz"
Values
1 2.0000e+03 2.0000e+03 2.0000e+03 4.0000e+02 4.0000e+02 4.0000e+02
1 2.0000e+03 2.0000e+03 2.0000e+03 4.0000e+02 4.0000e+02 4.0000e+02
1 2.0000e+03 2.0000e+03 2.0000e+03 4.0000e+02 4.0000e+02 4.0000e+02
1 2.0000e+03 2.0000e+03 2.0000e+03 4.0000e+02 4.0000e+02 4.0000e+02
1 2.0000e+03 2.0000e+03 2.0000e+03 4.0000e+02 4.0000e+02 4.0000e+02
1 2.0000e+03 2.0000e+03 2.0000e+03 4.0000e+02 4.0000e+02 4.0000e+02
1 2.0000e+03 2.0000e+03 2.0000e+03 4.0000e+02 4.0000e+02 4.0000e+02
1 2.0000e+03 2.0000e+03 2.0000e+03 4.0000e+02 4.0000e+02 4.0000e+02
GaussPoint -
Moderator: GiD Team
GaussPoint -
- Attachments
-
- report fail.zip
- Post-Processor Images
- (1.69 MiB) Downloaded 283 times
-
- parcelaHexaV7.post.res.zip
- Report .res
- (1.1 KiB) Downloaded 330 times
Re: GaussPoint -
Hi,
I am not expert in gauss points, I just extract the information from
https://www.gidhome.com/documents/custo ... s%20Points
On hexahedras internal coordinates:
a=0.577350269189626
(-a,-a,-a) ( a,-a,-a) ( a, a,-a) (-a, a,-a) (-a,-a, a) ( a,-a, a) ( a, a, a) (-a, a, a)
So it seams that the order of gauss points is not the correct.
I am not expert in gauss points, I just extract the information from
https://www.gidhome.com/documents/custo ... s%20Points
On hexahedras internal coordinates:
a=0.577350269189626
(-a,-a,-a) ( a,-a,-a) ( a, a,-a) (-a, a,-a) (-a,-a, a) ( a,-a, a) ( a, a, a) (-a, a, a)
So it seams that the order of gauss points is not the correct.