Hi Enrique,
I have a surface current distribution that I can visualize in GiD postprocess. I know that I can plot the graph of that current distribution along a line, at a point, or along a border. I wonder how can I find the current by inputting the x,y,z coordinates of my choice i-e I want to know the current distribution at specific points and I don't want to specify those points by mouse click. Rather, I want to enter the coordinates of those points and see the currents corresponding to those points.
Abdul Maalik
Ph.D Student
Ohio State University
Columbus, Ohio, USA
From: gidlist-bounces at listas.cimne.upc.edu [mailto:gidlist-bounces at listas.cimne.upc.edu] On Behalf Of Enrique Escolano
Sent: Friday, August 01, 2014 9:32 AM
To: gidlist at listas.cimne.upc.edu
Subject: Re: [GiDlist] Viewing results in GiD Postprocess
Instead of create graphs from menus, it is more comfortable to create them from the Graphs window (Window-View graphs...)
[cid:image001.jpg at 01CFE954.E51FB9A0]
And to select the start and end points, if the center is an existing node, then you can simply pick it (or enter its id number).
If the mouse cursor is a "+" then GiD is expecting a new coordinate x,y,z but you can swap to pick an existing point with Ctrl-a (or click the contextual menu and select "Join")
If the center is not a node you must calculate its coordinates and enter the x,y,z
And for the end point you can calculate also its x,y,z or you can enter the coordinates relative to the previous point (the center) with this syntax starting by @
@x,y
Or with polar coordinates:
@radius,angle
I think that the polar option is what you want. Angle is in degrees, starting from x axe counter-clockwise
e.g. to go 0.2 units in a direction of 45 degrees enter
@0.2,45
Enrique Escolano
De: gidlist-bounces at listas.cimne.upc.edumailto:gidlist-bounces at listas.cimne.upc.edu [mailto:gidlist-bounces at listas.cimne.upc.edu] En nombre de Maalik, Abdul
Enviado el: viernes, 1 de agosto de 2014 2:03
Para: gidlist at listas.cimne.upc.edumailto:gidlist at listas.cimne.upc.edu
Asunto: [GiDlist] Viewing results in GiD Postprocess
Hi,
I have a 2D plot of current density of a circular plate. Now I want to plot the variation of current along a radial line (rho) at some given angle (phi).I know that I can go to
View results/Graphs/Line graph. Now I have two questions regarding this.
i) How can I specify the start and end point of the radial line ? (starting point should be center of circular plate and end point should be on the circumference of the plate)
ii) How can I specify the angle (with respect to horizontal axis) at which the radial line is to be drawn?
Best Regards,
Abdul Maalik
PhD Student
ElectroScience Laboratory
Department of Electrial and Computer Engineering
Ohio State University
Columbus, OH 43212
USA
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20141016/17dd5eaa/attachment-0001.htm
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 14033 bytes
Desc: image001.jpg
Url : http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20141016/17dd5eaa/attachment-0001.jpg
[GiDlist] Viewing results in postprocess
Moderator: GiD Team
[GiDlist] Viewing results in postprocess
While selecting the point you can swap between select an existing node (and
then click it or enter its integer id),
or select a coordinate (and then click it somehow in screen, like pick point
on element, or enter the x y z)
Off course the x y z is expected to be inside some element of the domain
(with a tolerance), then the results are extrapolated to this point.
To swap the mode, press Ctrol-a (a in lowercase !!) or in the contextual
mouse menu select "Join" or "NoJoin" ). The mouse cursor is different in
each mode.
Enrique
De: gidlist-bounces at listas.cimne.upc.edu
[mailto:gidlist-bounces at listas.cimne.upc.edu] En nombre de Maalik, Abdul
Enviado el: jueves, 16 de octubre de 2014 21:24
Para: gidlist at listas.cimne.upc.edu
Asunto: [GiDlist] Viewing results in postprocess
Hi Enrique,
I have a surface current distribution that I can visualize in GiD
postprocess. I know that I can plot the graph of that current distribution
along a line, at a point, or along a border. I wonder how can I find the
current by inputting the x,y,z coordinates of my choice i-e I want to know
the current distribution at specific points and I don't want to specify
those points by mouse click. Rather, I want to enter the coordinates of
those points and see the currents corresponding to those points.
Abdul Maalik
Ph.D Student
Ohio State University
Columbus, Ohio, USA
From: gidlist-bounces at listas.cimne.upc.edu
[mailto:gidlist-bounces at listas.cimne.upc.edu] On Behalf Of Enrique Escolano
Sent: Friday, August 01, 2014 9:32 AM
To: gidlist at listas.cimne.upc.edu
Subject: Re: [GiDlist] Viewing results in GiD Postprocess
Instead of create graphs from menus, it is more comfortable to create them
from the Graphs window (Window-View graphs.)
And to select the start and end points, if the center is an existing node,
then you can simply pick it (or enter its id number).
If the mouse cursor is a "+" then GiD is expecting a new coordinate x,y,z
but you can swap to pick an existing point with Ctrl-a (or click the
contextual menu and select "Join")
If the center is not a node you must calculate its coordinates and enter the
x,y,z
And for the end point you can calculate also its x,y,z or you can enter the
coordinates relative to the previous point (the center) with this syntax
starting by @
@x,y
Or with polar coordinates:
@radius,angle
I think that the polar option is what you want. Angle is in degrees,
starting from x axe counter-clockwise
e.g. to go 0.2 units in a direction of 45 degrees enter
@0.2,45
Enrique Escolano
De: gidlist-bounces at listas.cimne.upc.edu
[mailto:gidlist-bounces at listas.cimne.upc.edu] En nombre de Maalik, Abdul
Enviado el: viernes, 1 de agosto de 2014 2:03
Para: gidlist at listas.cimne.upc.edu
Asunto: [GiDlist] Viewing results in GiD Postprocess
Hi,
I have a 2D plot of current density of a circular plate. Now I want to plot
the variation of current along a radial line (rho) at some given angle
(phi).I know that I can go to
View results/Graphs/Line graph. Now I have two questions regarding this.
i) How can I specify the start and end point of the
radial line ? (starting point should be center of circular plate and end
point should be on the circumference of the plate)
ii) How can I specify the angle (with respect to
horizontal axis) at which the radial line is to be drawn?
Best Regards,
Abdul Maalik
PhD Student
ElectroScience Laboratory
Department of Electrial and Computer Engineering
Ohio State University
Columbus, OH 43212
USA
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20141016/5d55aab8/attachment-0001.htm
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 14033 bytes
Desc: not available
Url : http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20141016/5d55aab8/attachment-0001.jpeg
then click it or enter its integer id),
or select a coordinate (and then click it somehow in screen, like pick point
on element, or enter the x y z)
Off course the x y z is expected to be inside some element of the domain
(with a tolerance), then the results are extrapolated to this point.
To swap the mode, press Ctrol-a (a in lowercase !!) or in the contextual
mouse menu select "Join" or "NoJoin" ). The mouse cursor is different in
each mode.
Enrique
De: gidlist-bounces at listas.cimne.upc.edu
[mailto:gidlist-bounces at listas.cimne.upc.edu] En nombre de Maalik, Abdul
Enviado el: jueves, 16 de octubre de 2014 21:24
Para: gidlist at listas.cimne.upc.edu
Asunto: [GiDlist] Viewing results in postprocess
Hi Enrique,
I have a surface current distribution that I can visualize in GiD
postprocess. I know that I can plot the graph of that current distribution
along a line, at a point, or along a border. I wonder how can I find the
current by inputting the x,y,z coordinates of my choice i-e I want to know
the current distribution at specific points and I don't want to specify
those points by mouse click. Rather, I want to enter the coordinates of
those points and see the currents corresponding to those points.
Abdul Maalik
Ph.D Student
Ohio State University
Columbus, Ohio, USA
From: gidlist-bounces at listas.cimne.upc.edu
[mailto:gidlist-bounces at listas.cimne.upc.edu] On Behalf Of Enrique Escolano
Sent: Friday, August 01, 2014 9:32 AM
To: gidlist at listas.cimne.upc.edu
Subject: Re: [GiDlist] Viewing results in GiD Postprocess
Instead of create graphs from menus, it is more comfortable to create them
from the Graphs window (Window-View graphs.)
And to select the start and end points, if the center is an existing node,
then you can simply pick it (or enter its id number).
If the mouse cursor is a "+" then GiD is expecting a new coordinate x,y,z
but you can swap to pick an existing point with Ctrl-a (or click the
contextual menu and select "Join")
If the center is not a node you must calculate its coordinates and enter the
x,y,z
And for the end point you can calculate also its x,y,z or you can enter the
coordinates relative to the previous point (the center) with this syntax
starting by @
@x,y
Or with polar coordinates:
@radius,angle
I think that the polar option is what you want. Angle is in degrees,
starting from x axe counter-clockwise
e.g. to go 0.2 units in a direction of 45 degrees enter
@0.2,45
Enrique Escolano
De: gidlist-bounces at listas.cimne.upc.edu
[mailto:gidlist-bounces at listas.cimne.upc.edu] En nombre de Maalik, Abdul
Enviado el: viernes, 1 de agosto de 2014 2:03
Para: gidlist at listas.cimne.upc.edu
Asunto: [GiDlist] Viewing results in GiD Postprocess
Hi,
I have a 2D plot of current density of a circular plate. Now I want to plot
the variation of current along a radial line (rho) at some given angle
(phi).I know that I can go to
View results/Graphs/Line graph. Now I have two questions regarding this.
i) How can I specify the start and end point of the
radial line ? (starting point should be center of circular plate and end
point should be on the circumference of the plate)
ii) How can I specify the angle (with respect to
horizontal axis) at which the radial line is to be drawn?
Best Regards,
Abdul Maalik
PhD Student
ElectroScience Laboratory
Department of Electrial and Computer Engineering
Ohio State University
Columbus, OH 43212
USA
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20141016/5d55aab8/attachment-0001.htm
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 14033 bytes
Desc: not available
Url : http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20141016/5d55aab8/attachment-0001.jpeg
Who is online
Users browsing this forum: No registered users and 1 guest