Hi Gid team,
When opening saved gid model (from 11.1.9d|) in ver 11.0.6 mesh/no mesh assignments are respected, so it must be a bug in 11.1.9d ?
Regards
Mark
--------------------------------------------
On Mon, 6/23/14, Mark Smith piedycat at yahoo.com wrote:
Subject: Re: [GiDlist] STEP file import
To: gidlist at listas.cimne.upc.edu
Date: Monday, June 23, 2014, 11:16 AM
Hi GiD team,
I have downloaded ver 11.1.9d, and the STEP
import works but reports errors although it seems to have
imported it OK.
I have a problem when
meshing as the mesher doesen't obey the mesh/no-mesh
criteria I have imposed on lines,surfaces and volumes
although when you do mesh-draw-mesh/no mesh it shows those
entities which should & shluld not be meshed but the
mesher ignores the asignments:?
Regards
Mark
--------------------------------------------
On Fri, 6/20/14, Enrique Escolano escolano at cimne.upc.edu
wrote:
Subject: Re: [GiDlist]
STEP file import
To: gidlist at listas.cimne.upc.edu
Date: Friday, June 20, 2014, 2:22 PM
In fact the STEP import
is implemented in the last 11.1.9d, you can
download
and use it now,
but some
things have been fixed and
enhanced for the version 12
(available
the 17 July during the 7th GiD
convention)
Users upgrading
from version 11 to 12 will
have a 60 % of discount of
version 12
prices (these prices are not
available
until version 12 will be
available)
STEP export is not
implemented for version
12.0.x official,
but probably it
will appear
in some 12.1.xd developer versions (during the
next two
years
until a new
official version will be
released)
Regards
Enrique
-----Mensaje
original-----
De:
gidlist-bounces at listas.cimne.upc.edu
[mailto:gidlist-bounces at listas.cimne.upc.edu]
En nombre de Mark Smith
Enviado el: viernes,
20 de junio de 2014
14:36
Para: gidlist at listas.cimne.upc.edu
Asunto: Re: [GiDlist] STEP file import
Hi
Abel,
Will it be able to export STEP as
well?
Regards
Mark
--------------------------------------------
On Thu, 6/19/14, Abel Coll abelcs at cimne.upc.edu
wrote:
Subject: Re:
[GiDlist] STEP file import
To: gidlist at listas.cimne.upc.edu
Date: Thursday, June 19, 2014, 7:18 PM
Dear Mark,
We have
just implemented this
capability within
the last months. It will
be available in
the new 12th
version,
which will be released during the GiD Conventoin
(July
17th and
18th).
Kind
regards,
ABEL
_________________________________
Abel Coll
Sans - Civil
Engineer
CIMNE - International
Center for Numerical Methods in
Engineering Ofice
c-2, C1 building -
Campus Nord UPC Gran
Capità s/n,
08034 Barcelona
T: 34 -
93 401 74 03 Fax:
34 -
93 40 65 17
-----Mensaje
original-----
De:
gidlist-bounces at listas.cimne.upc.edu
[mailto:gidlist-bounces at listas.cimne.upc.edu]
En nombre de Mark Smith
Enviado el: jueves,
19 de
junio de 2014
18:15
Para: GiDlist
Asunto:
[GiDlist] STEP file import
Are there any plans to allow
GiD to import STEP files?
Regards
mark
_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist
_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist
_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist
_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist
[GiDlist] STEP file import
Moderator: GiD Team
[GiDlist] STEP file import
Please, send us a zip with the model to check it.
(can send directly to my e-mail instead of the gidlist)
Enrique
-----Mensaje original-----
De: gidlist-bounces at listas.cimne.upc.edu
[mailto:gidlist-bounces at listas.cimne.upc.edu] En nombre de Mark Smith
Enviado el: lunes, 23 de junio de 2014 12:36
Para: GiDlist
Asunto: Re: [GiDlist] STEP file import
Hi Gid team,
When opening saved gid model (from 11.1.9d|) in ver 11.0.6 mesh/no mesh
assignments are respected, so it must be a bug in 11.1.9d ?
Regards
Mark
--------------------------------------------
On Mon, 6/23/14, Mark Smith piedycat at yahoo.com wrote:
Subject: Re: [GiDlist] STEP file import
To: gidlist at listas.cimne.upc.edu
Date: Monday, June 23, 2014, 11:16 AM
Hi GiD team,
I have downloaded ver 11.1.9d, and the STEP import works but reports
errors although it seems to have imported it OK.
I have a problem when
meshing as the mesher doesen't obey the mesh/no-mesh criteria I have
imposed on lines,surfaces and volumes although when you do
mesh-draw-mesh/no mesh it shows those entities which should & shluld not be
meshed but the mesher ignores the asignments:?
Regards
Mark
--------------------------------------------
On Fri, 6/20/14, Enrique Escolano escolano at cimne.upc.edu
wrote:
Subject: Re: [GiDlist]
STEP file import
To: gidlist at listas.cimne.upc.edu
Date: Friday, June 20, 2014, 2:22 PM
In fact the STEP import
is implemented in the last 11.1.9d, you can download
and use it now,
but some
things have been fixed and
enhanced for the version 12
(available
the 17 July during the 7th GiD
convention)
Users upgrading
from version 11 to 12 will
have a 60 % of discount of
version 12
prices (these prices are not
available
until version 12 will be
available)
STEP export is not
implemented for version
12.0.x official,
but probably it
will appear
in some 12.1.xd developer versions (during the next two
years
until a new
official version will be
released)
Regards
Enrique
-----Mensaje
original-----
De:
gidlist-bounces at listas.cimne.upc.edu
[mailto:gidlist-bounces at listas.cimne.upc.edu]
En nombre de Mark Smith
Enviado el: viernes,
20 de junio de 2014
14:36
Para: gidlist at listas.cimne.upc.edu
Asunto: Re: [GiDlist] STEP file import
Hi
Abel,
Will it be able to export STEP as
well?
Regards
Mark
--------------------------------------------
On Thu, 6/19/14, Abel Coll abelcs at cimne.upc.edu
wrote:
Subject: Re:
[GiDlist] STEP file import
To: gidlist at listas.cimne.upc.edu
Date: Thursday, June 19, 2014, 7:18 PM
Dear Mark,
We have
just implemented this
capability within
the last months. It will
be available in
the new 12th
version,
which will be released during the GiD Conventoin (July
17th and
18th).
Kind
regards,
ABEL
_________________________________
Abel Coll
Sans - Civil
Engineer
CIMNE - International
Center for Numerical Methods in
Engineering Ofice
c-2, C1 building -
Campus Nord UPC Gran
Capità s/n,
08034 Barcelona
T: 34 -
93 401 74 03 Fax:
34 -
93 40 65 17
-----Mensaje
original-----
De:
gidlist-bounces at listas.cimne.upc.edu
[mailto:gidlist-bounces at listas.cimne.upc.edu]
En nombre de Mark Smith
Enviado el: jueves,
19 de
junio de 2014
18:15
Para: GiDlist
Asunto:
[GiDlist] STEP file import
Are there any plans to allow
GiD to import STEP files?
Regards
mark
_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist
_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist
_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist
_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist
_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist
(can send directly to my e-mail instead of the gidlist)
Enrique
-----Mensaje original-----
De: gidlist-bounces at listas.cimne.upc.edu
[mailto:gidlist-bounces at listas.cimne.upc.edu] En nombre de Mark Smith
Enviado el: lunes, 23 de junio de 2014 12:36
Para: GiDlist
Asunto: Re: [GiDlist] STEP file import
Hi Gid team,
When opening saved gid model (from 11.1.9d|) in ver 11.0.6 mesh/no mesh
assignments are respected, so it must be a bug in 11.1.9d ?
Regards
Mark
--------------------------------------------
On Mon, 6/23/14, Mark Smith piedycat at yahoo.com wrote:
Subject: Re: [GiDlist] STEP file import
To: gidlist at listas.cimne.upc.edu
Date: Monday, June 23, 2014, 11:16 AM
Hi GiD team,
I have downloaded ver 11.1.9d, and the STEP import works but reports
errors although it seems to have imported it OK.
I have a problem when
meshing as the mesher doesen't obey the mesh/no-mesh criteria I have
imposed on lines,surfaces and volumes although when you do
mesh-draw-mesh/no mesh it shows those entities which should & shluld not be
meshed but the mesher ignores the asignments:?
Regards
Mark
--------------------------------------------
On Fri, 6/20/14, Enrique Escolano escolano at cimne.upc.edu
wrote:
Subject: Re: [GiDlist]
STEP file import
To: gidlist at listas.cimne.upc.edu
Date: Friday, June 20, 2014, 2:22 PM
In fact the STEP import
is implemented in the last 11.1.9d, you can download
and use it now,
but some
things have been fixed and
enhanced for the version 12
(available
the 17 July during the 7th GiD
convention)
Users upgrading
from version 11 to 12 will
have a 60 % of discount of
version 12
prices (these prices are not
available
until version 12 will be
available)
STEP export is not
implemented for version
12.0.x official,
but probably it
will appear
in some 12.1.xd developer versions (during the next two
years
until a new
official version will be
released)
Regards
Enrique
-----Mensaje
original-----
De:
gidlist-bounces at listas.cimne.upc.edu
[mailto:gidlist-bounces at listas.cimne.upc.edu]
En nombre de Mark Smith
Enviado el: viernes,
20 de junio de 2014
14:36
Para: gidlist at listas.cimne.upc.edu
Asunto: Re: [GiDlist] STEP file import
Hi
Abel,
Will it be able to export STEP as
well?
Regards
Mark
--------------------------------------------
On Thu, 6/19/14, Abel Coll abelcs at cimne.upc.edu
wrote:
Subject: Re:
[GiDlist] STEP file import
To: gidlist at listas.cimne.upc.edu
Date: Thursday, June 19, 2014, 7:18 PM
Dear Mark,
We have
just implemented this
capability within
the last months. It will
be available in
the new 12th
version,
which will be released during the GiD Conventoin (July
17th and
18th).
Kind
regards,
ABEL
_________________________________
Abel Coll
Sans - Civil
Engineer
CIMNE - International
Center for Numerical Methods in
Engineering Ofice
c-2, C1 building -
Campus Nord UPC Gran
Capità s/n,
08034 Barcelona
T: 34 -
93 401 74 03 Fax:
34 -
93 40 65 17
-----Mensaje
original-----
De:
gidlist-bounces at listas.cimne.upc.edu
[mailto:gidlist-bounces at listas.cimne.upc.edu]
En nombre de Mark Smith
Enviado el: jueves,
19 de
junio de 2014
18:15
Para: GiDlist
Asunto:
[GiDlist] STEP file import
Are there any plans to allow
GiD to import STEP files?
Regards
mark
_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist
_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist
_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist
_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist
_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist
[GiDlist] STEP file import
It seems that is not a bug of the 11.1.9d version,
As I have pointed, in your model do you have set the preference
Meshing-Other - Mesh always by default. For surfaces= true
Uncheck it and generate the mesh again.
Enrique
-----Mensaje original-----
De: gidlist-bounces at listas.cimne.upc.edu
[mailto:gidlist-bounces at listas.cimne.upc.edu] En nombre de Enrique Escolano
Enviado el: lunes, 23 de junio de 2014 13:09
Para: gidlist at listas.cimne.upc.edu
Asunto: Re: [GiDlist] STEP file import
Please, send us a zip with the model to check it.
(can send directly to my e-mail instead of the gidlist)
Enrique
-----Mensaje original-----
De: gidlist-bounces at listas.cimne.upc.edu
[mailto:gidlist-bounces at listas.cimne.upc.edu] En nombre de Mark Smith
Enviado el: lunes, 23 de junio de 2014 12:36
Para: GiDlist
Asunto: Re: [GiDlist] STEP file import
Hi Gid team,
When opening saved gid model (from 11.1.9d|) in ver 11.0.6 mesh/no mesh
assignments are respected, so it must be a bug in 11.1.9d ?
Regards
Mark
--------------------------------------------
On Mon, 6/23/14, Mark Smith piedycat at yahoo.com wrote:
Subject: Re: [GiDlist] STEP file import
To: gidlist at listas.cimne.upc.edu
Date: Monday, June 23, 2014, 11:16 AM
Hi GiD team,
I have downloaded ver 11.1.9d, and the STEP import works but reports
errors although it seems to have imported it OK.
I have a problem when
meshing as the mesher doesen't obey the mesh/no-mesh criteria I have
imposed on lines,surfaces and volumes although when you do
mesh-draw-mesh/no mesh it shows those entities which should & shluld not be
meshed but the mesher ignores the asignments:?
Regards
Mark
--------------------------------------------
On Fri, 6/20/14, Enrique Escolano escolano at cimne.upc.edu
wrote:
Subject: Re: [GiDlist]
STEP file import
To: gidlist at listas.cimne.upc.edu
Date: Friday, June 20, 2014, 2:22 PM
In fact the STEP import
is implemented in the last 11.1.9d, you can download
and use it now,
but some
things have been fixed and
enhanced for the version 12
(available
the 17 July during the 7th GiD
convention)
Users upgrading
from version 11 to 12 will
have a 60 % of discount of
version 12
prices (these prices are not
available
until version 12 will be
available)
STEP export is not
implemented for version
12.0.x official,
but probably it
will appear
in some 12.1.xd developer versions (during the next two
years
until a new
official version will be
released)
Regards
Enrique
-----Mensaje
original-----
De:
gidlist-bounces at listas.cimne.upc.edu
[mailto:gidlist-bounces at listas.cimne.upc.edu]
En nombre de Mark Smith
Enviado el: viernes,
20 de junio de 2014
14:36
Para: gidlist at listas.cimne.upc.edu
Asunto: Re: [GiDlist] STEP file import
Hi
Abel,
Will it be able to export STEP as
well?
Regards
Mark
--------------------------------------------
On Thu, 6/19/14, Abel Coll abelcs at cimne.upc.edu
wrote:
Subject: Re:
[GiDlist] STEP file import
To: gidlist at listas.cimne.upc.edu
Date: Thursday, June 19, 2014, 7:18 PM
Dear Mark,
We have
just implemented this
capability within
the last months. It will
be available in
the new 12th
version,
which will be released during the GiD Conventoin (July
17th and
18th).
Kind
regards,
ABEL
_________________________________
Abel Coll
Sans - Civil
Engineer
CIMNE - International
Center for Numerical Methods in
Engineering Ofice
c-2, C1 building -
Campus Nord UPC Gran
Capità s/n,
08034 Barcelona
T: 34 -
93 401 74 03 Fax:
34 -
93 40 65 17
-----Mensaje
original-----
De:
gidlist-bounces at listas.cimne.upc.edu
[mailto:gidlist-bounces at listas.cimne.upc.edu]
En nombre de Mark Smith
Enviado el: jueves,
19 de
junio de 2014
18:15
Para: GiDlist
Asunto:
[GiDlist] STEP file import
Are there any plans to allow
GiD to import STEP files?
Regards
mark
_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist
_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist
_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist
_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist
_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist
_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist
As I have pointed, in your model do you have set the preference
Meshing-Other - Mesh always by default. For surfaces= true
Uncheck it and generate the mesh again.
Enrique
-----Mensaje original-----
De: gidlist-bounces at listas.cimne.upc.edu
[mailto:gidlist-bounces at listas.cimne.upc.edu] En nombre de Enrique Escolano
Enviado el: lunes, 23 de junio de 2014 13:09
Para: gidlist at listas.cimne.upc.edu
Asunto: Re: [GiDlist] STEP file import
Please, send us a zip with the model to check it.
(can send directly to my e-mail instead of the gidlist)
Enrique
-----Mensaje original-----
De: gidlist-bounces at listas.cimne.upc.edu
[mailto:gidlist-bounces at listas.cimne.upc.edu] En nombre de Mark Smith
Enviado el: lunes, 23 de junio de 2014 12:36
Para: GiDlist
Asunto: Re: [GiDlist] STEP file import
Hi Gid team,
When opening saved gid model (from 11.1.9d|) in ver 11.0.6 mesh/no mesh
assignments are respected, so it must be a bug in 11.1.9d ?
Regards
Mark
--------------------------------------------
On Mon, 6/23/14, Mark Smith piedycat at yahoo.com wrote:
Subject: Re: [GiDlist] STEP file import
To: gidlist at listas.cimne.upc.edu
Date: Monday, June 23, 2014, 11:16 AM
Hi GiD team,
I have downloaded ver 11.1.9d, and the STEP import works but reports
errors although it seems to have imported it OK.
I have a problem when
meshing as the mesher doesen't obey the mesh/no-mesh criteria I have
imposed on lines,surfaces and volumes although when you do
mesh-draw-mesh/no mesh it shows those entities which should & shluld not be
meshed but the mesher ignores the asignments:?
Regards
Mark
--------------------------------------------
On Fri, 6/20/14, Enrique Escolano escolano at cimne.upc.edu
wrote:
Subject: Re: [GiDlist]
STEP file import
To: gidlist at listas.cimne.upc.edu
Date: Friday, June 20, 2014, 2:22 PM
In fact the STEP import
is implemented in the last 11.1.9d, you can download
and use it now,
but some
things have been fixed and
enhanced for the version 12
(available
the 17 July during the 7th GiD
convention)
Users upgrading
from version 11 to 12 will
have a 60 % of discount of
version 12
prices (these prices are not
available
until version 12 will be
available)
STEP export is not
implemented for version
12.0.x official,
but probably it
will appear
in some 12.1.xd developer versions (during the next two
years
until a new
official version will be
released)
Regards
Enrique
-----Mensaje
original-----
De:
gidlist-bounces at listas.cimne.upc.edu
[mailto:gidlist-bounces at listas.cimne.upc.edu]
En nombre de Mark Smith
Enviado el: viernes,
20 de junio de 2014
14:36
Para: gidlist at listas.cimne.upc.edu
Asunto: Re: [GiDlist] STEP file import
Hi
Abel,
Will it be able to export STEP as
well?
Regards
Mark
--------------------------------------------
On Thu, 6/19/14, Abel Coll abelcs at cimne.upc.edu
wrote:
Subject: Re:
[GiDlist] STEP file import
To: gidlist at listas.cimne.upc.edu
Date: Thursday, June 19, 2014, 7:18 PM
Dear Mark,
We have
just implemented this
capability within
the last months. It will
be available in
the new 12th
version,
which will be released during the GiD Conventoin (July
17th and
18th).
Kind
regards,
ABEL
_________________________________
Abel Coll
Sans - Civil
Engineer
CIMNE - International
Center for Numerical Methods in
Engineering Ofice
c-2, C1 building -
Campus Nord UPC Gran
Capità s/n,
08034 Barcelona
T: 34 -
93 401 74 03 Fax:
34 -
93 40 65 17
-----Mensaje
original-----
De:
gidlist-bounces at listas.cimne.upc.edu
[mailto:gidlist-bounces at listas.cimne.upc.edu]
En nombre de Mark Smith
Enviado el: jueves,
19 de
junio de 2014
18:15
Para: GiDlist
Asunto:
[GiDlist] STEP file import
Are there any plans to allow
GiD to import STEP files?
Regards
mark
_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist
_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist
_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist
_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist
_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist
_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist
-
Julia Camargo
[GiDlist] observation points for results
Hi GiD team,
I would like to export my results in some points that are not mesh nodes. I
have the coordinates of those points. Is there a way to get the results in
those "observation points"?
Thank you,
Julia
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20140623/ec7d7206/attachment.htm
I would like to export my results in some points that are not mesh nodes. I
have the coordinates of those points. Is there a way to get the results in
those "observation points"?
Thank you,
Julia
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20140623/ec7d7206/attachment.htm
-
Mark Smith
[GiDlist] STEP file import
Hi Enrique,
Thank you.
It may not be a bug but the "mesh criteria - no-mesh - volumes" over rides this setting on earlier versions of GiD including 11.0.6 which seems more sensible?
Regards
Mark
--------------------------------------------
On Mon, 6/23/14, Enrique Escolano escolano at cimne.upc.edu wrote:
Subject: Re: [GiDlist] STEP file import
To: gidlist at listas.cimne.upc.edu
Date: Monday, June 23, 2014, 4:05 PM
It seems that is not a
bug of the 11.1.9d version,
As I have
pointed, in your model do you have set the preference
Meshing-Other - Mesh always by default.
For surfaces= true
Uncheck it and generate
the mesh again.
Enrique
-----Mensaje original-----
De: gidlist-bounces at listas.cimne.upc.edu
[mailto:gidlist-bounces at listas.cimne.upc.edu]
En nombre de Enrique Escolano
Enviado el:
lunes, 23 de junio de 2014 13:09
Para: gidlist at listas.cimne.upc.edu
Asunto: Re: [GiDlist] STEP file import
Please, send us a zip with the
model to check it.
(can send directly to my
e-mail instead of the gidlist)
Enrique
-----Mensaje original-----
De:
gidlist-bounces at listas.cimne.upc.edu
[mailto:gidlist-bounces at listas.cimne.upc.edu]
En nombre de Mark Smith
Enviado el: lunes,
23 de junio de 2014 12:36
Para: GiDlist
Asunto: Re: [GiDlist] STEP file import
Hi Gid team,
When opening saved gid model (from 11.1.9d|) in
ver 11.0.6 mesh/no mesh
assignments are
respected, so it must be a bug in 11.1.9d ?
Regards
Mark
--------------------------------------------
On Mon, 6/23/14, Mark Smith piedycat at yahoo.com
wrote:
Subject: Re:
[GiDlist] STEP file import
To: gidlist at listas.cimne.upc.edu
Date: Monday, June 23, 2014, 11:16 AM
Hi GiD team,
I have downloaded ver 11.1.9d, and the STEP
import works but reports
errors although it
seems to have imported it OK.
I have a
problem when
meshing as the mesher
doesen't obey the mesh/no-mesh criteria I have
imposed on lines,surfaces and volumes
although when you do
mesh-draw-mesh/no mesh
it shows those entities which should & shluld not
be
meshed but the mesher ignores the
asignments:?
Regards
Mark
--------------------------------------------
On Fri, 6/20/14, Enrique Escolano escolano at cimne.upc.edu
wrote:
Subject: Re: [GiDlist]
STEP file import
To: gidlist at listas.cimne.upc.edu
Date: Friday, June 20, 2014, 2:22 PM
In fact the STEP
import
is implemented in the last
11.1.9d, you can download
and use it
now,
but some
things have been fixed and
enhanced for the version 12
(available
the 17 July during the 7th GiD
convention)
Users upgrading
from version 11 to 12 will
have a 60 % of discount of
version 12
prices (these prices are not
available
until version 12
will be
available)
STEP export is not
implemented for version
12.0.x
official,
but probably it
will appear
in some
12.1.xd developer versions (during the next two
years
until a new
official version will be
released)
Regards
Enrique
-----Mensaje
original-----
De:
gidlist-bounces at listas.cimne.upc.edu
[mailto:gidlist-bounces at listas.cimne.upc.edu]
En nombre de Mark Smith
Enviado el: viernes,
20 de
junio de 2014
14:36
Para: gidlist at listas.cimne.upc.edu
Asunto: Re: [GiDlist] STEP file import
Hi
Abel,
Will it be able
to export STEP as
well?
Regards
Mark
--------------------------------------------
On Thu, 6/19/14, Abel Coll abelcs at cimne.upc.edu
wrote:
Subject: Re:
[GiDlist] STEP file import
To: gidlist at listas.cimne.upc.edu
Date: Thursday, June 19, 2014, 7:18 PM
Dear Mark,
We
have
just implemented this
capability within
the last months. It
will
be available in
the new 12th
version,
which will be released during the GiD
Conventoin (July
17th and
18th).
Kind
regards,
ABEL
_________________________________
Abel
Coll
Sans - Civil
Engineer
CIMNE - International
Center for Numerical Methods in
Engineering Ofice
c-2,
C1 building -
Campus Nord UPC Gran
Capità s/n,
08034
Barcelona
T: 34 -
93
401 74 03 Fax:
34
-
93 40 65 17
-----Mensaje
original-----
De:
gidlist-bounces at listas.cimne.upc.edu
[mailto:gidlist-bounces at listas.cimne.upc.edu]
En nombre de Mark Smith
Enviado el: jueves,
19 de
junio de 2014
18:15
Para: GiDlist
Asunto:
[GiDlist] STEP file import
Are there any plans to allow
GiD to import STEP
files?
Regards
mark
_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist
_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist
_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist
_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist
_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist
_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist
_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist
Thank you.
It may not be a bug but the "mesh criteria - no-mesh - volumes" over rides this setting on earlier versions of GiD including 11.0.6 which seems more sensible?
Regards
Mark
--------------------------------------------
On Mon, 6/23/14, Enrique Escolano escolano at cimne.upc.edu wrote:
Subject: Re: [GiDlist] STEP file import
To: gidlist at listas.cimne.upc.edu
Date: Monday, June 23, 2014, 4:05 PM
It seems that is not a
bug of the 11.1.9d version,
As I have
pointed, in your model do you have set the preference
Meshing-Other - Mesh always by default.
For surfaces= true
Uncheck it and generate
the mesh again.
Enrique
-----Mensaje original-----
De: gidlist-bounces at listas.cimne.upc.edu
[mailto:gidlist-bounces at listas.cimne.upc.edu]
En nombre de Enrique Escolano
Enviado el:
lunes, 23 de junio de 2014 13:09
Para: gidlist at listas.cimne.upc.edu
Asunto: Re: [GiDlist] STEP file import
Please, send us a zip with the
model to check it.
(can send directly to my
e-mail instead of the gidlist)
Enrique
-----Mensaje original-----
De:
gidlist-bounces at listas.cimne.upc.edu
[mailto:gidlist-bounces at listas.cimne.upc.edu]
En nombre de Mark Smith
Enviado el: lunes,
23 de junio de 2014 12:36
Para: GiDlist
Asunto: Re: [GiDlist] STEP file import
Hi Gid team,
When opening saved gid model (from 11.1.9d|) in
ver 11.0.6 mesh/no mesh
assignments are
respected, so it must be a bug in 11.1.9d ?
Regards
Mark
--------------------------------------------
On Mon, 6/23/14, Mark Smith piedycat at yahoo.com
wrote:
Subject: Re:
[GiDlist] STEP file import
To: gidlist at listas.cimne.upc.edu
Date: Monday, June 23, 2014, 11:16 AM
Hi GiD team,
I have downloaded ver 11.1.9d, and the STEP
import works but reports
errors although it
seems to have imported it OK.
I have a
problem when
meshing as the mesher
doesen't obey the mesh/no-mesh criteria I have
imposed on lines,surfaces and volumes
although when you do
mesh-draw-mesh/no mesh
it shows those entities which should & shluld not
be
meshed but the mesher ignores the
asignments:?
Regards
Mark
--------------------------------------------
On Fri, 6/20/14, Enrique Escolano escolano at cimne.upc.edu
wrote:
Subject: Re: [GiDlist]
STEP file import
To: gidlist at listas.cimne.upc.edu
Date: Friday, June 20, 2014, 2:22 PM
In fact the STEP
import
is implemented in the last
11.1.9d, you can download
and use it
now,
but some
things have been fixed and
enhanced for the version 12
(available
the 17 July during the 7th GiD
convention)
Users upgrading
from version 11 to 12 will
have a 60 % of discount of
version 12
prices (these prices are not
available
until version 12
will be
available)
STEP export is not
implemented for version
12.0.x
official,
but probably it
will appear
in some
12.1.xd developer versions (during the next two
years
until a new
official version will be
released)
Regards
Enrique
-----Mensaje
original-----
De:
gidlist-bounces at listas.cimne.upc.edu
[mailto:gidlist-bounces at listas.cimne.upc.edu]
En nombre de Mark Smith
Enviado el: viernes,
20 de
junio de 2014
14:36
Para: gidlist at listas.cimne.upc.edu
Asunto: Re: [GiDlist] STEP file import
Hi
Abel,
Will it be able
to export STEP as
well?
Regards
Mark
--------------------------------------------
On Thu, 6/19/14, Abel Coll abelcs at cimne.upc.edu
wrote:
Subject: Re:
[GiDlist] STEP file import
To: gidlist at listas.cimne.upc.edu
Date: Thursday, June 19, 2014, 7:18 PM
Dear Mark,
We
have
just implemented this
capability within
the last months. It
will
be available in
the new 12th
version,
which will be released during the GiD
Conventoin (July
17th and
18th).
Kind
regards,
ABEL
_________________________________
Abel
Coll
Sans - Civil
Engineer
CIMNE - International
Center for Numerical Methods in
Engineering Ofice
c-2,
C1 building -
Campus Nord UPC Gran
Capità s/n,
08034
Barcelona
T: 34 -
93
401 74 03 Fax:
34
-
93 40 65 17
-----Mensaje
original-----
De:
gidlist-bounces at listas.cimne.upc.edu
[mailto:gidlist-bounces at listas.cimne.upc.edu]
En nombre de Mark Smith
Enviado el: jueves,
19 de
junio de 2014
18:15
Para: GiDlist
Asunto:
[GiDlist] STEP file import
Are there any plans to allow
GiD to import STEP
files?
Regards
mark
_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist
_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist
_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist
_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist
_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist
_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist
_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist
-
HEMMI, Shigeru
[GiDlist] Does "contour fill" works on GID 11.1.9.d?
Dear GiD team,
Within my experience, post process of "contour fill" does not work on
GiD 11.1.9.d.
For instance, please verify it in cmas2d example.
Can anybody assert if it works or not?
Best regards,
HEMMI, Shigeru
Within my experience, post process of "contour fill" does not work on
GiD 11.1.9.d.
For instance, please verify it in cmas2d example.
Can anybody assert if it works or not?
Best regards,
HEMMI, Shigeru
[GiDlist] Does "contour fill" works on GID 11.1.9.d?
Dear Shigeru,
I've tested the contour fill and it's working for me.
Are you using Windows or Linux version? x32 or x64?
Have you tried to see the contour fill with other files with results?
Best regards,
El 24/06/2014 13:47, HEMMI, Shigeru escribió:
Dear GiD team,
Within my experience, post process of "contour fill" does not work on
GiD 11.1.9.d.
For instance, please verify it in cmas2d example.
Can anybody assert if it works or not?
Best regards,
HEMMI, Shigeru
_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist
--
*Anna Monros Bellart*
CIMNE - International Center for Numerical Methods in Engineering
Campus Nord UPC - C1 building - C2 Office
Gran Capità s/n - 08034 Barcelona
T: 34 - 93 401 74 03 Fax: 34 - 93 40 65 17
AVISO IMPORTANTE
Los datos de carácter personal contenidos en el mensaje, se registrarán
en un fichero para facilitar la gestión de las comunicaciones de CIMNE.
Se pueden ejercitar los derechos de acceso, rectificación, cancelación y
oposición por escrito, dirigiéndose a nuestras oficinas de CIMNE, Gran
Capitán s/n, Edificio C1 - Campus Norte UPC, 08034 Barcelona, España.
AVÍS IMPORTANT
Les dades de caràcter personal contingudes en aquest missatge es
registraran en un fitxer per facilitar la gestió de les comunicacions
del CIMNE. Es poden exercir els drets d'accés, rectificació,
cancel.lació i oposició, per escrit a les nostres oficines del CIMNE,
Gran Capità s/n, Edifici C1, Campus Nord UPC, 08034 Barcelona, Espanya.
IMPORTANT NOTICE
All personal data contained in this mail will be processed
confidentially and stored in a file property of CIMNE in order to manage
corporate communications. You may exercise the right of access,
rectification, deletion and objection by letter sent to CIMNE, Gran
Capitán, Edificio C1 - Campus Norte UPC, 08034 Barcelona, Spain.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20140625/a016eb33/attachment.htm
I've tested the contour fill and it's working for me.
Are you using Windows or Linux version? x32 or x64?
Have you tried to see the contour fill with other files with results?
Best regards,
El 24/06/2014 13:47, HEMMI, Shigeru escribió:
Dear GiD team,
Within my experience, post process of "contour fill" does not work on
GiD 11.1.9.d.
For instance, please verify it in cmas2d example.
Can anybody assert if it works or not?
Best regards,
HEMMI, Shigeru
_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist
--
*Anna Monros Bellart*
CIMNE - International Center for Numerical Methods in Engineering
Campus Nord UPC - C1 building - C2 Office
Gran Capità s/n - 08034 Barcelona
T: 34 - 93 401 74 03 Fax: 34 - 93 40 65 17
AVISO IMPORTANTE
Los datos de carácter personal contenidos en el mensaje, se registrarán
en un fichero para facilitar la gestión de las comunicaciones de CIMNE.
Se pueden ejercitar los derechos de acceso, rectificación, cancelación y
oposición por escrito, dirigiéndose a nuestras oficinas de CIMNE, Gran
Capitán s/n, Edificio C1 - Campus Norte UPC, 08034 Barcelona, España.
AVÍS IMPORTANT
Les dades de caràcter personal contingudes en aquest missatge es
registraran en un fitxer per facilitar la gestió de les comunicacions
del CIMNE. Es poden exercir els drets d'accés, rectificació,
cancel.lació i oposició, per escrit a les nostres oficines del CIMNE,
Gran Capità s/n, Edifici C1, Campus Nord UPC, 08034 Barcelona, Espanya.
IMPORTANT NOTICE
All personal data contained in this mail will be processed
confidentially and stored in a file property of CIMNE in order to manage
corporate communications. You may exercise the right of access,
rectification, deletion and objection by letter sent to CIMNE, Gran
Capitán, Edificio C1 - Campus Norte UPC, 08034 Barcelona, Spain.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20140625/a016eb33/attachment.htm
-
HEMMI, Shigeru
[GiDlist] Does "contour fill" works on GID 11.1.9.d?
Thanks Anna Monros for the reply,
My PC is Windows 8.1 Pro 64bit and "Safe visualization mode" of GiD
has been used
for postprocessing.
As seen in cmas2dsample_postprocess.png attached to this mail,
"contour lines" works but "contour fill not working".
Best Regards,
HEMMMI, Shigeru
2014-06-25 15:41 GMT+09:00 Anna Monros monros at cimne.upc.edu:
Dear Shigeru,
I've tested the contour fill and it's working for me.
Are you using Windows or Linux version? x32 or x64?
Have you tried to see the contour fill with other files with results?
Best regards,
El 24/06/2014 13:47, HEMMI, Shigeru escribió:
Dear GiD team,
Within my experience, post process of "contour fill" does not work on
GiD 11.1.9.d.
For instance, please verify it in cmas2d example.
Can anybody assert if it works or not?
Best regards,
HEMMI, Shigeru
_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist
--
Anna Monros Bellart
CIMNE - International Center for Numerical Methods in Engineering
Campus Nord UPC - C1 building - C2 Office
Gran Capità s/n - 08034 Barcelona
T: 34 - 93 401 74 03 Fax: 34 - 93 40 65 17
AVISO IMPORTANTE
Los datos de carácter personal contenidos en el mensaje, se registrarán en
un fichero para facilitar la gestión de las comunicaciones de CIMNE. Se
pueden ejercitar los derechos de acceso, rectificación, cancelación y
oposición por escrito, dirigiéndose a nuestras oficinas de CIMNE, Gran
Capitán s/n, Edificio C1 - Campus Norte UPC, 08034 Barcelona, España.
AVÍS IMPORTANT
Les dades de caràcter personal contingudes en aquest missatge es registraran
en un fitxer per facilitar la gestió de les comunicacions del CIMNE. Es
poden exercir els drets d'accés, rectificació, cancel•lació i oposició, per
escrit a les nostres oficines del CIMNE, Gran Capità s/n, Edifici C1, Campus
Nord UPC, 08034 Barcelona, Espanya.
IMPORTANT NOTICE
All personal data contained in this mail will be processed confidentially
and stored in a file property of CIMNE in order to manage corporate
communications. You may exercise the right of access, rectification,
deletion and objection by letter sent to CIMNE, Gran Capitán, Edificio C1 -
Campus Norte UPC, 08034 Barcelona, Spain.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: cmas2dsample_postprocess.png
Type: image/png
Size: 56863 bytes
Desc: not available
Url : http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20140625/555a7d7b/attachment-0001.png
My PC is Windows 8.1 Pro 64bit and "Safe visualization mode" of GiD
has been used
for postprocessing.
As seen in cmas2dsample_postprocess.png attached to this mail,
"contour lines" works but "contour fill not working".
Best Regards,
HEMMMI, Shigeru
2014-06-25 15:41 GMT+09:00 Anna Monros monros at cimne.upc.edu:
Dear Shigeru,
I've tested the contour fill and it's working for me.
Are you using Windows or Linux version? x32 or x64?
Have you tried to see the contour fill with other files with results?
Best regards,
El 24/06/2014 13:47, HEMMI, Shigeru escribió:
Dear GiD team,
Within my experience, post process of "contour fill" does not work on
GiD 11.1.9.d.
For instance, please verify it in cmas2d example.
Can anybody assert if it works or not?
Best regards,
HEMMI, Shigeru
_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist
--
Anna Monros Bellart
CIMNE - International Center for Numerical Methods in Engineering
Campus Nord UPC - C1 building - C2 Office
Gran Capità s/n - 08034 Barcelona
T: 34 - 93 401 74 03 Fax: 34 - 93 40 65 17
AVISO IMPORTANTE
Los datos de carácter personal contenidos en el mensaje, se registrarán en
un fichero para facilitar la gestión de las comunicaciones de CIMNE. Se
pueden ejercitar los derechos de acceso, rectificación, cancelación y
oposición por escrito, dirigiéndose a nuestras oficinas de CIMNE, Gran
Capitán s/n, Edificio C1 - Campus Norte UPC, 08034 Barcelona, España.
AVÍS IMPORTANT
Les dades de caràcter personal contingudes en aquest missatge es registraran
en un fitxer per facilitar la gestió de les comunicacions del CIMNE. Es
poden exercir els drets d'accés, rectificació, cancel•lació i oposició, per
escrit a les nostres oficines del CIMNE, Gran Capità s/n, Edifici C1, Campus
Nord UPC, 08034 Barcelona, Espanya.
IMPORTANT NOTICE
All personal data contained in this mail will be processed confidentially
and stored in a file property of CIMNE in order to manage corporate
communications. You may exercise the right of access, rectification,
deletion and objection by letter sent to CIMNE, Gran Capitán, Edificio C1 -
Campus Norte UPC, 08034 Barcelona, Spain.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: cmas2dsample_postprocess.png
Type: image/png
Size: 56863 bytes
Desc: not available
Url : http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20140625/555a7d7b/attachment-0001.png
[GiDlist] Does "contour fill" works on GID 11.1.9.d?
Thank you for the information.
Could you please send me the example to test it?
You can send it directly to monros at cimne.upc.edu instead of GiDList.
Thank you,
El miércoles, 25 de junio de 2014 12:56:14, HEMMI, Shigeru escribió:
Thanks Anna Monros for the reply,
My PC is Windows 8.1 Pro 64bit and "Safe visualization mode" of GiD
has been used
for postprocessing.
As seen in cmas2dsample_postprocess.png attached to this mail,
"contour lines" works but "contour fill not working".
Best Regards,
HEMMMI, Shigeru
2014-06-25 15:41 GMT+09:00 Anna Monros monros at cimne.upc.edu:
Dear Shigeru,
I've tested the contour fill and it's working for me.
Are you using Windows or Linux version? x32 or x64?
Have you tried to see the contour fill with other files with results?
Best regards,
El 24/06/2014 13:47, HEMMI, Shigeru escribió:
Dear GiD team,
Within my experience, post process of "contour fill" does not work on
GiD 11.1.9.d.
For instance, please verify it in cmas2d example.
Can anybody assert if it works or not?
Best regards,
HEMMI, Shigeru
_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist
--
Anna Monros Bellart
CIMNE - International Center for Numerical Methods in Engineering
Campus Nord UPC - C1 building - C2 Office
Gran Capità s/n - 08034 Barcelona
T: 34 - 93 401 74 03 Fax: 34 - 93 40 65 17
AVISO IMPORTANTE
Los datos de carácter personal contenidos en el mensaje, se
registrarán en
un fichero para facilitar la gestión de las comunicaciones de CIMNE. Se
pueden ejercitar los derechos de acceso, rectificación, cancelación y
oposición por escrito, dirigiéndose a nuestras oficinas de CIMNE, Gran
Capitán s/n, Edificio C1 - Campus Norte UPC, 08034 Barcelona, España.
AVÍS IMPORTANT
Les dades de caràcter personal contingudes en aquest missatge es
registraran
en un fitxer per facilitar la gestió de les comunicacions del CIMNE. Es
poden exercir els drets d'accés, rectificació, cancel•lació i
oposició, per
escrit a les nostres oficines del CIMNE, Gran Capità s/n, Edifici C1,
Campus
Nord UPC, 08034 Barcelona, Espanya.
IMPORTANT NOTICE
All personal data contained in this mail will be processed confidentially
and stored in a file property of CIMNE in order to manage corporate
communications. You may exercise the right of access, rectification,
deletion and objection by letter sent to CIMNE, Gran Capitán,
Edificio C1 -
Campus Norte UPC, 08034 Barcelona, Spain.
--
*Anna Monros Bellart*
CIMNE - International Center for Numerical Methods in Engineering
Campus Nord UPC - C1 building - C2 Office
Gran Capità s/n - 08034 Barcelona
T: 34 - 93 401 74 03 Fax: 34 - 93 40 65 17
AVISO IMPORTANTE
Los datos de carácter personal contenidos en el mensaje, se
registrarán en un fichero para facilitar la gestión de las
comunicaciones de CIMNE. Se pueden ejercitar los derechos de acceso,
rectificación, cancelación y oposición por escrito, dirigiéndose a
nuestras oficinas de CIMNE, Gran Capitán s/n, Edificio C1 - Campus
Norte UPC, 08034 Barcelona, España.
AVÍS IMPORTANT
Les dades de caràcter personal contingudes en aquest missatge es
registraran en un fitxer per facilitar la gestió de les comunicacions
del CIMNE. Es poden exercir els drets d'accés, rectificació,
cancel•lació i oposició, per escrit a les nostres oficines del CIMNE,
Gran Capità s/n, Edifici C1, Campus Nord UPC, 08034 Barcelona, Espanya.
IMPORTANT NOTICE
All personal data contained in this mail will be processed
confidentially and stored in a file property of CIMNE in order to
manage corporate communications. You may exercise the right of
access, rectification, deletion and objection by letter sent to
CIMNE, Gran Capitán, Edificio C1 - Campus Norte UPC, 08034 Barcelona,
Spain.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20140625/2ad3623d/attachment.htm
Could you please send me the example to test it?
You can send it directly to monros at cimne.upc.edu instead of GiDList.
Thank you,
El miércoles, 25 de junio de 2014 12:56:14, HEMMI, Shigeru escribió:
Thanks Anna Monros for the reply,
My PC is Windows 8.1 Pro 64bit and "Safe visualization mode" of GiD
has been used
for postprocessing.
As seen in cmas2dsample_postprocess.png attached to this mail,
"contour lines" works but "contour fill not working".
Best Regards,
HEMMMI, Shigeru
2014-06-25 15:41 GMT+09:00 Anna Monros monros at cimne.upc.edu:
Dear Shigeru,
I've tested the contour fill and it's working for me.
Are you using Windows or Linux version? x32 or x64?
Have you tried to see the contour fill with other files with results?
Best regards,
El 24/06/2014 13:47, HEMMI, Shigeru escribió:
Dear GiD team,
Within my experience, post process of "contour fill" does not work on
GiD 11.1.9.d.
For instance, please verify it in cmas2d example.
Can anybody assert if it works or not?
Best regards,
HEMMI, Shigeru
_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist
--
Anna Monros Bellart
CIMNE - International Center for Numerical Methods in Engineering
Campus Nord UPC - C1 building - C2 Office
Gran Capità s/n - 08034 Barcelona
T: 34 - 93 401 74 03 Fax: 34 - 93 40 65 17
AVISO IMPORTANTE
Los datos de carácter personal contenidos en el mensaje, se
registrarán en
un fichero para facilitar la gestión de las comunicaciones de CIMNE. Se
pueden ejercitar los derechos de acceso, rectificación, cancelación y
oposición por escrito, dirigiéndose a nuestras oficinas de CIMNE, Gran
Capitán s/n, Edificio C1 - Campus Norte UPC, 08034 Barcelona, España.
AVÍS IMPORTANT
Les dades de caràcter personal contingudes en aquest missatge es
registraran
en un fitxer per facilitar la gestió de les comunicacions del CIMNE. Es
poden exercir els drets d'accés, rectificació, cancel•lació i
oposició, per
escrit a les nostres oficines del CIMNE, Gran Capità s/n, Edifici C1,
Campus
Nord UPC, 08034 Barcelona, Espanya.
IMPORTANT NOTICE
All personal data contained in this mail will be processed confidentially
and stored in a file property of CIMNE in order to manage corporate
communications. You may exercise the right of access, rectification,
deletion and objection by letter sent to CIMNE, Gran Capitán,
Edificio C1 -
Campus Norte UPC, 08034 Barcelona, Spain.
--
*Anna Monros Bellart*
CIMNE - International Center for Numerical Methods in Engineering
Campus Nord UPC - C1 building - C2 Office
Gran Capità s/n - 08034 Barcelona
T: 34 - 93 401 74 03 Fax: 34 - 93 40 65 17
AVISO IMPORTANTE
Los datos de carácter personal contenidos en el mensaje, se
registrarán en un fichero para facilitar la gestión de las
comunicaciones de CIMNE. Se pueden ejercitar los derechos de acceso,
rectificación, cancelación y oposición por escrito, dirigiéndose a
nuestras oficinas de CIMNE, Gran Capitán s/n, Edificio C1 - Campus
Norte UPC, 08034 Barcelona, España.
AVÍS IMPORTANT
Les dades de caràcter personal contingudes en aquest missatge es
registraran en un fitxer per facilitar la gestió de les comunicacions
del CIMNE. Es poden exercir els drets d'accés, rectificació,
cancel•lació i oposició, per escrit a les nostres oficines del CIMNE,
Gran Capità s/n, Edifici C1, Campus Nord UPC, 08034 Barcelona, Espanya.
IMPORTANT NOTICE
All personal data contained in this mail will be processed
confidentially and stored in a file property of CIMNE in order to
manage corporate communications. You may exercise the right of
access, rectification, deletion and objection by letter sent to
CIMNE, Gran Capitán, Edificio C1 - Campus Norte UPC, 08034 Barcelona,
Spain.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20140625/2ad3623d/attachment.htm
[GiDlist] Does "contour fill" works on GID 11.1.9.d?
Maybe do you have something unusual in your gid.ini file
Start “GiD safe mode” once, and set the ‘Reset preferences’ option, to delete this file
And not set the Software OpenGL option, if it works well it is faster than using OpenGL by software.
If it works badly (something is drawn bad in screen) then can change this setting after in the preferences window (Fast / Safe visualization mode)
De: gidlist-bounces at listas.cimne.upc.edu [mailto:gidlist-bounces at listas.cimne.upc.edu] En nombre de Anna Monros
Enviado el: miércoles, 25 de junio de 2014 14:51
Para: textdirected at gmail.com
CC: gidlist at listas.cimne.upc.edu
Asunto: Re: [GiDlist] Does "contour fill" works on GID 11.1.9.d?
Thank you for the information.
Could you please send me the example to test it?
You can send it directly to monros at cimne.upc.edu instead of GiDList.
Thank you,
El miércoles, 25 de junio de 2014 12:56:14, HEMMI, Shigeru escribió:
Thanks Anna Monros for the reply,
My PC is Windows 8.1 Pro 64bit and "Safe visualization mode" of GiD
has been used
for postprocessing.
As seen in cmas2dsample_postprocess.png attached to this mail,
"contour lines" works but "contour fill not working".
Best Regards,
HEMMMI, Shigeru
2014-06-25 15:41 GMT+09:00 Anna Monros mailto:monros at cimne.upc.edu monros at cimne.upc.edu:
Dear Shigeru,
I've tested the contour fill and it's working for me.
Are you using Windows or Linux version? x32 or x64?
Have you tried to see the contour fill with other files with results?
Best regards,
El 24/06/2014 13:47, HEMMI, Shigeru escribió:
Dear GiD team,
Within my experience, post process of "contour fill" does not work on
GiD 11.1.9.d.
For instance, please verify it in cmas2d example.
Can anybody assert if it works or not?
Best regards,
HEMMI, Shigeru
_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist
--
Anna Monros Bellart
CIMNE - International Center for Numerical Methods in Engineering
Campus Nord UPC - C1 building - C2 Office
Gran Capità s/n - 08034 Barcelona
T: 34 - 93 401 74 03 Fax: 34 - 93 40 65 17
AVISO IMPORTANTE
Los datos de carácter personal contenidos en el mensaje, se registrarán en
un fichero para facilitar la gestión de las comunicaciones de CIMNE. Se
pueden ejercitar los derechos de acceso, rectificación, cancelación y
oposición por escrito, dirigiéndose a nuestras oficinas de CIMNE, Gran
Capitán s/n, Edificio C1 - Campus Norte UPC, 08034 Barcelona, España.
AVÍS IMPORTANT
Les dades de caràcter personal contingudes en aquest missatge es registraran
en un fitxer per facilitar la gestió de les comunicacions del CIMNE. Es
poden exercir els drets d'accés, rectificació, cancel•lació i oposició, per
escrit a les nostres oficines del CIMNE, Gran Capità s/n, Edifici C1, Campus
Nord UPC, 08034 Barcelona, Espanya.
IMPORTANT NOTICE
All personal data contained in this mail will be processed confidentially
and stored in a file property of CIMNE in order to manage corporate
communications. You may exercise the right of access, rectification,
deletion and objection by letter sent to CIMNE, Gran Capitán, Edificio C1 -
Campus Norte UPC, 08034 Barcelona, Spain.
--
Anna Monros Bellart
CIMNE - International Center for Numerical Methods in Engineering
Campus Nord UPC - C1 building - C2 Office
Gran Capità s/n - 08034 Barcelona
T: 34 - 93 401 74 03 Fax: 34 - 93 40 65 17
AVISO IMPORTANTE
Los datos de carácter personal contenidos en el mensaje, se registrarán en un fichero para facilitar la gestión de las comunicaciones de CIMNE. Se pueden ejercitar los derechos de acceso, rectificación, cancelación y oposición por escrito, dirigiéndose a nuestras oficinas de CIMNE, Gran Capitán s/n, Edificio C1 - Campus Norte UPC, 08034 Barcelona, España.
AVÍS IMPORTANT
Les dades de caràcter personal contingudes en aquest missatge es registraran en un fitxer per facilitar la gestió de les comunicacions del CIMNE. Es poden exercir els drets d'accés, rectificació, cancel•lació i oposició, per escrit a les nostres oficines del CIMNE, Gran Capità s/n, Edifici C1, Campus Nord UPC, 08034 Barcelona, Espanya.
IMPORTANT NOTICE
All personal data contained in this mail will be processed confidentially and stored in a file property of CIMNE in order to manage corporate communications. You may exercise the right of access, rectification, deletion and objection by letter sent to CIMNE, Gran Capitán, Edificio C1 - Campus Norte UPC, 08034 Barcelona, Spain.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20140625/17e4b711/attachment-0001.htm
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/png
Size: 12984 bytes
Desc: not available
Url : http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20140625/17e4b711/attachment-0002.png
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/png
Size: 27084 bytes
Desc: not available
Url : http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20140625/17e4b711/attachment-0003.png
Start “GiD safe mode” once, and set the ‘Reset preferences’ option, to delete this file
And not set the Software OpenGL option, if it works well it is faster than using OpenGL by software.
If it works badly (something is drawn bad in screen) then can change this setting after in the preferences window (Fast / Safe visualization mode)
De: gidlist-bounces at listas.cimne.upc.edu [mailto:gidlist-bounces at listas.cimne.upc.edu] En nombre de Anna Monros
Enviado el: miércoles, 25 de junio de 2014 14:51
Para: textdirected at gmail.com
CC: gidlist at listas.cimne.upc.edu
Asunto: Re: [GiDlist] Does "contour fill" works on GID 11.1.9.d?
Thank you for the information.
Could you please send me the example to test it?
You can send it directly to monros at cimne.upc.edu instead of GiDList.
Thank you,
El miércoles, 25 de junio de 2014 12:56:14, HEMMI, Shigeru escribió:
Thanks Anna Monros for the reply,
My PC is Windows 8.1 Pro 64bit and "Safe visualization mode" of GiD
has been used
for postprocessing.
As seen in cmas2dsample_postprocess.png attached to this mail,
"contour lines" works but "contour fill not working".
Best Regards,
HEMMMI, Shigeru
2014-06-25 15:41 GMT+09:00 Anna Monros mailto:monros at cimne.upc.edu monros at cimne.upc.edu:
Dear Shigeru,
I've tested the contour fill and it's working for me.
Are you using Windows or Linux version? x32 or x64?
Have you tried to see the contour fill with other files with results?
Best regards,
El 24/06/2014 13:47, HEMMI, Shigeru escribió:
Dear GiD team,
Within my experience, post process of "contour fill" does not work on
GiD 11.1.9.d.
For instance, please verify it in cmas2d example.
Can anybody assert if it works or not?
Best regards,
HEMMI, Shigeru
_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist
--
Anna Monros Bellart
CIMNE - International Center for Numerical Methods in Engineering
Campus Nord UPC - C1 building - C2 Office
Gran Capità s/n - 08034 Barcelona
T: 34 - 93 401 74 03 Fax: 34 - 93 40 65 17
AVISO IMPORTANTE
Los datos de carácter personal contenidos en el mensaje, se registrarán en
un fichero para facilitar la gestión de las comunicaciones de CIMNE. Se
pueden ejercitar los derechos de acceso, rectificación, cancelación y
oposición por escrito, dirigiéndose a nuestras oficinas de CIMNE, Gran
Capitán s/n, Edificio C1 - Campus Norte UPC, 08034 Barcelona, España.
AVÍS IMPORTANT
Les dades de caràcter personal contingudes en aquest missatge es registraran
en un fitxer per facilitar la gestió de les comunicacions del CIMNE. Es
poden exercir els drets d'accés, rectificació, cancel•lació i oposició, per
escrit a les nostres oficines del CIMNE, Gran Capità s/n, Edifici C1, Campus
Nord UPC, 08034 Barcelona, Espanya.
IMPORTANT NOTICE
All personal data contained in this mail will be processed confidentially
and stored in a file property of CIMNE in order to manage corporate
communications. You may exercise the right of access, rectification,
deletion and objection by letter sent to CIMNE, Gran Capitán, Edificio C1 -
Campus Norte UPC, 08034 Barcelona, Spain.
--
Anna Monros Bellart
CIMNE - International Center for Numerical Methods in Engineering
Campus Nord UPC - C1 building - C2 Office
Gran Capità s/n - 08034 Barcelona
T: 34 - 93 401 74 03 Fax: 34 - 93 40 65 17
AVISO IMPORTANTE
Los datos de carácter personal contenidos en el mensaje, se registrarán en un fichero para facilitar la gestión de las comunicaciones de CIMNE. Se pueden ejercitar los derechos de acceso, rectificación, cancelación y oposición por escrito, dirigiéndose a nuestras oficinas de CIMNE, Gran Capitán s/n, Edificio C1 - Campus Norte UPC, 08034 Barcelona, España.
AVÍS IMPORTANT
Les dades de caràcter personal contingudes en aquest missatge es registraran en un fitxer per facilitar la gestió de les comunicacions del CIMNE. Es poden exercir els drets d'accés, rectificació, cancel•lació i oposició, per escrit a les nostres oficines del CIMNE, Gran Capità s/n, Edifici C1, Campus Nord UPC, 08034 Barcelona, Espanya.
IMPORTANT NOTICE
All personal data contained in this mail will be processed confidentially and stored in a file property of CIMNE in order to manage corporate communications. You may exercise the right of access, rectification, deletion and objection by letter sent to CIMNE, Gran Capitán, Edificio C1 - Campus Norte UPC, 08034 Barcelona, Spain.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20140625/17e4b711/attachment-0001.htm
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/png
Size: 12984 bytes
Desc: not available
Url : http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20140625/17e4b711/attachment-0002.png
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/png
Size: 27084 bytes
Desc: not available
Url : http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20140625/17e4b711/attachment-0003.png
