As you said the step file could have been imported ok although some messages
are raised.
The version 12 has some enhancements, like avoid show messages that really
are not errors, show an advance bar, etc.
About the problem with the mesh /no mesh criteria, what is happening? Some
entities set to not to mesh are generating elements?
Have a look to the preference Meshing-Other - Mesh always by default.
Enrique
-----Mensaje original-----
De:
gidlist-bounces at listas.cimne.upc.edu
[mailto:
gidlist-bounces at listas.cimne.upc.edu] En nombre de Mark Smith
Enviado el: lunes, 23 de junio de 2014 12:16
Para:
gidlist at listas.cimne.upc.edu
Asunto: Re: [GiDlist] STEP file import
Hi GiD team,
I have downloaded ver 11.1.9d, and the STEP import works but reports errors
although it seems to have imported it OK.
I have a problem when meshing as the mesher doesen't obey the mesh/no-mesh
criteria I have imposed on lines,surfaces and volumes although when you do
mesh-draw-mesh/no mesh it shows those entities which should & shluld not be
meshed but the mesher ignores the asignments:?
Regards
Mark
--------------------------------------------
On Fri, 6/20/14, Enrique Escolano
escolano at cimne.upc.edu wrote:
Subject: Re: [GiDlist] STEP file import
To:
gidlist at listas.cimne.upc.edu
Date: Friday, June 20, 2014, 2:22 PM
In fact the STEP import
is implemented in the last 11.1.9d, you can download and use it now, but
some things have been fixed and enhanced for the version 12 (available
the 17 July during the 7th GiD
convention)
Users upgrading
from version 11 to 12 will have a 60 % of discount of version 12 prices
(these prices are not available until version 12 will be
available)
STEP export is not implemented for version 12.0.x official, but probably
it will appear in some 12.1.xd developer versions (during the next two
years until a new official version will be
released)
Regards
Enrique
-----Mensaje original-----
De:
gidlist-bounces at listas.cimne.upc.edu
[mailto:
gidlist-bounces at listas.cimne.upc.edu]
En nombre de Mark Smith
Enviado el: viernes,
20 de junio de 2014 14:36
Para:
gidlist at listas.cimne.upc.edu
Asunto: Re: [GiDlist] STEP file import
Hi Abel,
Will it be able to export STEP as well?
Regards
Mark
--------------------------------------------
On Thu, 6/19/14, Abel Coll
abelcs at cimne.upc.edu
wrote:
Subject: Re:
[GiDlist] STEP file import
To:
gidlist at listas.cimne.upc.edu
Date: Thursday, June 19, 2014, 7:18 PM
Dear Mark,
We have just implemented this
capability within the last months. It will be available in the new 12th
version, which will be released during the GiD Conventoin (July 17th and
18th).
Kind
regards,
ABEL
_________________________________
Abel Coll
Sans - Civil Engineer
CIMNE - International
Center for Numerical Methods in Engineering Ofice c-2, C1 building -
Campus Nord UPC Gran Capità s/n,
08034 Barcelona
T: 34 - 93 401 74 03 Fax:
34 - 93 40 65 17
-----Mensaje
original-----
De:
gidlist-bounces at listas.cimne.upc.edu
[mailto:
gidlist-bounces at listas.cimne.upc.edu]
En nombre de Mark Smith
Enviado el: jueves,
19 de junio de 2014
18:15
Para: GiDlist
Asunto: [GiDlist] STEP file import
Are there any plans to allow
GiD to import STEP files?
Regards
mark
_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist
_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist
_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist
_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist
_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist