[ GiDlist ] contact in GiD

Moderator: GiD Team

Post Reply
ramsan at stamp.cimne.upc.es

[ GiDlist ] contact in GiD

Post by ramsan at stamp.cimne.upc.es »

Hello,

Where is the problem? In order to understand correctly the problem,
it is necessary for me to know which kind of analysis program are
you using to make the calculation and what are the requirements of
this program related to the contacts.

Best regards,

pachevalier at netcourrier.com writes:
Hello,

I use GiD without difficulties to calculate some mechanical parts. I wish to calculate a contact between a cylinder and a plate thick to study in 3
measurements the pressure of hertz. I don't manage to simulate this contact between two strong at all.
The example that me to treat is a cylinder of diameter 20 , of length 30 mm submitted to a strength of 5000 N and in contact on a plate of 40 x 40 mm, thickness 20 mm.
Is someone able to explain me the step-by-step gait to calculate this contact?

Thank you for your help.

Patrick Chevalier
France

----- La messagerie itinérante sans abonnement NetCourrier -----
Web : www.netcourrier.com Minitel : 3615 et 3623 NETCOURRIER
Tél : 08 36 69 00 21

--
Centre Internacional de Mètodes Ramon Ribó
Numèrics en Enginyeria
ramsan at cimne.upc.es
C/ Gran Capitan s/n,
Modulo C1, Campus Norte UPC, tel. +34 93 401 74 03
E-08034 Barcelona, Spain fax. +34 93 401 65 17
Post Reply