Page 1 of 1

[GiDlist] GiD7.1.7b-win.exe

Posted: Wed Nov 27, 2002 5:51 pm
by Enrique Escolano
Dear all.
It is available a new GiD beta version 7.1.7b for Windows.

To download GiD7.1.7b-win.exe, see the "download beta versions" section of the GiD page

http://www.gidhome.com/download/do07.subst

Regards
_______________________________________________________
Enrique Escolano
http://www.gidhome.com escolano at cimne.upc.es
CIMNE - Centro Internacional de Métodos Numéricos en Ingeniería
C/ Gran Capitán s/n, Modulo C1, Campus Norte UPC,
E-08034 Barcelona, Spain tel. +34 93 401 74 03
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20021127/c7cbff16/attachment.htm

[GiDlist] Can GiD generate beam-shell element together?

Posted: Thu Nov 28, 2002 5:44 am
by VSayako Willy
Hi Enrique
I know that GiD can generate beam and shell element
but these should be seperated. In my case can GiD
generate the beam and shell? Please look at the
attached file. The model in the attached file is
generated by hand(xxx.msh) and import by GiD mesh
command.
Any technic to have GiD generate it automatically?

I can't see GiD7.1.7b-win.exe on the CIMNE/GiD
webpage yet. Still only GiD7.1.3b.

Regards.

--- Enrique Escolano escolano at cimne.upc.es wrote:
Dear all.
It is available a new GiD beta version 7.1.7b for
Windows.

To download GiD7.1.7b-win.exe, see the "download
beta versions" section of the GiD page

http://www.gidhome.com/download/do07.subst

Regards

_______________________________________________________
Enrique Escolano
http://www.gidhome.com
escolano at cimne.upc.es
CIMNE - Centro Internacional de Métodos Numéricos en
Ingeniería
C/ Gran Capitán s/n, Modulo C1, Campus Norte UPC,
E-08034 Barcelona, Spain
tel. +34 93 401 74 03




__________________________________________________
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Doc1.doc
Type: application/msword
Size: 31744 bytes
Desc: Doc1.doc
Url : http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20021128/d97f6ff3/attachment.doc

[GiDlist] Can GiD generate beam-shell element together?

Posted: Thu Nov 28, 2002 9:54 am
by Enrique Escolano
1) By default, if GiD generate the surface "shell" mesh elements, then not
generate
the line "beam" elements for the contour lines of this surfaces.
To force to generate also this line elements, use the menu:
Meshing-Mesh Criteria-Mesh-Lines
and select the desired lines.

2) GiD 7.1.7b-win.exe is in the same directory as GiD7.1.3b-win.exe!!

ftp://gid.cimne.upc.es/pub/gid_adds/Windows/GiD7.1.7b-win.exe

Enrique Escolano
----- Original Message -----
From: "VSayako Willy" vilaysako at yahoo.com
To: gidlist at gatxan.cimne.upc.es
Sent: Thursday, November 28, 2002 5:43 AM
Subject: [GiDlist] Can GiD generate beam-shell element together?


Hi Enrique
I know that GiD can generate beam and shell element
but these should be seperated. In my case can GiD
generate the beam and shell? Please look at the
attached file. The model in the attached file is
generated by hand(xxx.msh) and import by GiD mesh
command.
Any technic to have GiD generate it automatically?

I can't see GiD7.1.7b-win.exe on the CIMNE/GiD
webpage yet. Still only GiD7.1.3b.

Regards.

--- Enrique Escolano escolano at cimne.upc.es wrote:
Dear all.
It is available a new GiD beta version 7.1.7b for
Windows.

To download GiD7.1.7b-win.exe, see the "download
beta versions" section of the GiD page

http://www.gidhome.com/download/do07.subst

Regards

_______________________________________________________
Enrique Escolano
http://www.gidhome.com
escolano at cimne.upc.es
CIMNE - Centro Internacional de Métodos Numéricos en
Ingeniería
C/ Gran Capitán s/n, Modulo C1, Campus Norte UPC,
E-08034 Barcelona, Spain
tel. +34 93 401 74 03




__________________________________________________
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com

[GiDlist] Can GiD generate beam-shell element together?

Posted: Thu Nov 28, 2002 11:38 am
by VSayako Willy
Many thanks for your advice Enrique.

Best regards.


--- Enrique Escolano escolano at cimne.upc.es wrote:
1) By default, if GiD generate the surface "shell"
mesh elements, then not
generate
the line "beam" elements for the contour lines of
this surfaces.
To force to generate also this line elements, use
the menu:
Meshing-Mesh Criteria-Mesh-Lines
and select the desired lines.

2) GiD 7.1.7b-win.exe is in the same directory as
GiD7.1.3b-win.exe!!


ftp://gid.cimne.upc.es/pub/gid_adds/Windows/GiD7.1.7b-win.exe

Enrique Escolano
----- Original Message -----
From: "VSayako Willy" vilaysako at yahoo.com
To: gidlist at gatxan.cimne.upc.es
Sent: Thursday, November 28, 2002 5:43 AM
Subject: [GiDlist] Can GiD generate beam-shell
element together?


Hi Enrique
I know that GiD can generate beam and shell
element
but these should be seperated. In my case can GiD
generate the beam and shell? Please look at the
attached file. The model in the attached file is
generated by hand(xxx.msh) and import by GiD
mesh
command.
Any technic to have GiD generate it automatically?

I can't see GiD7.1.7b-win.exe on the CIMNE/GiD
webpage yet. Still only GiD7.1.3b.

Regards.



--- Enrique Escolano escolano at cimne.upc.es
wrote:
Dear all.
It is available a new GiD beta version 7.1.7b
for
Windows.

To download GiD7.1.7b-win.exe, see the "download
beta versions" section of the GiD page

http://www.gidhome.com/download/do07.subst

Regards



_______________________________________________________
Enrique Escolano
http://www.gidhome.com
escolano at cimne.upc.es
CIMNE - Centro Internacional de Métodos
Numéricos en
Ingeniería
C/ Gran Capitán s/n, Modulo C1, Campus Norte
UPC,
E-08034 Barcelona, Spain
tel. +34 93 401 74 03




__________________________________________________
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up
now.
http://mailplus.yahoo.com

_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist


__________________________________________________
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com

[GiDlist] GiD7.1.7b for SunOS

Posted: Fri Nov 29, 2002 11:13 am
by Jorge Suit Perez Ronda
Dear GiD user, the last beta version 7.1.7b for SunOS is available at
ftp://gid.cimne.upc.es/pub/gid_adds/Sun/gid7.1.7b.tar.gz.

best regards,

GiD Team.

[GiDlist] Where can I modify the JUSTIFY

Posted: Mon Dec 16, 2002 9:32 am
by VSayako Willy
Hi Enrique and all GiD team
I would like my fields appear on the windows box
from the LEFT JUSTIFY,original GiD start from Right.
Can we modify those such things in tcl files of GiD?

LEFT JUSTIFY:

XXXXXXXXXXXXXX
XXXXXXXXXX
XXXXXXX
XXXXXXXXXXXX

RIGHT JUSTIFY:
XXXXXXXXXXXXXX
XXXXXXXXXXXXXXXX
XXXXXXXXX


Regards.

__________________________________________________
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com

[GiDlist] Where can I modify the JUSTIFY

Posted: Mon Dec 16, 2002 5:39 pm
by Jorge Suit Perez Ronda
Dear VSayako, there is no way (except dealing with tcl code) to force
GiD to make a left justify in the data windows. But there is way you can
solve it. Using the field TKWIDGET (now an internal feature)
you can draw the contents of the data windows as you wish. Here is
attached a document on this feature and a sample doing a right justify
of the labels in the problem data window. Hope it helps.

best regards,

Jorge Suit

VSayako Willy wrote:

Hi Enrique and all GiD team
I would like my fields appear on the windows box
from the LEFT JUSTIFY,original GiD start from Right.
Can we modify those such things in tcl files of GiD?

LEFT JUSTIFY:

XXXXXXXXXXXXXX
XXXXXXXXXX
XXXXXXX
XXXXXXXXXXXX

RIGHT JUSTIFY:
XXXXXXXXXXXXXX
XXXXXXXXXXXXXXXX
XXXXXXXXX


Regards.

__________________________________________________
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com
_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist





-------------- next part --------------
A non-text attachment was scrubbed...
Name: tkwidget1.gid.tar.gz
Type: application/gzip
Size: 657 bytes
Desc: not available
Url : http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20021216/985dc210/attachment.bin
-------------- next part --------------
A non-text attachment was scrubbed...
Name: TkWidteg.pdf
Type: application/pdf
Size: 121141 bytes
Desc: not available
Url : http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20021216/985dc210/attachment.pdf