It is available for download the last beta version 7.1.3b for Windows.
If some user has download the previous 7.1.2b version, is recommended to update to this new
version to avoid some errors reading ascii results with time steps, and generating quadratic elements.
The GiD Team
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20021030/6a205742/attachment.htm
[GiDlist] New beta version 7.1.3b for Windows
Moderator: GiD Team
-
Miguel A. de Riera Pasenau
[GiDlist] New beta version 7.1.3b for Windows
among other things this new version has:
· materials can be unassigned individually or by books
· quadratic elements are drawn in pre- and in post- (cuts are stil done
as if these elements where linear . . .).
in the preferences window, folder 'graphic' there is a option menu
with the label 'draw quadratic element' with the options:
No: the quadratic elements are drawn as linear ones.
AsLine: the quadratic elements are drawn using lines between then nodes,
filled triangles/cuadrilaterals are subdivided in triangles.
AsCurve: the quadratic lines/edges are drawn as parabolas.
filled triangles/cuadrilaterals are still subdivided in triangles.
· some bugs corrections:
errors while reading some gausspoints and drawing tetras&hexas
enchancements while reading Femap ascii neutral format
interpolation errors of results over cuts when some results are not
defined on some nodes ( the legend showed 1..e+38/-1..e+38)
enchancements in SurfMesh
· new 'ResultGroup' block in ASCII postprocess data files to write results
grouped like this:
ResultGroup "Load Analysis" 1 OnNodes
ResultDescription "prueba rangos" Scalar
ResultDescription "ESCALAR DE PRUEBA" Scalar
ResultDescription "Desplacements" Vector
ResultDescription "Nodal Stresses" Matrix
Values
1 0.0 0.0 0.0 0.0 0.0 0.55014E+00 0.97276E-01 -0.15427E+00 0.0 0.0 0.0
...
116 7.4978158e-01 0.24357E-04 0.24357E-04 -0.18974E-03 0.0 0.21668E-02 -0.96841E-02 -0.23115E-01 0.0 0.0 0.0
End Values
· separated line options for line elements and streamlines
· changed .flavia.res .flavia.msh to .post.res and .post.res, which is more
descriptive. .flavia.* is still supported.
· the boundaries of the meshes/set can be saved in post: boundaries of
tetras/hexas/cuads/lines/points are triangles/cuads/lines/lines/none/none
with its nodal results.
Enrique Escolano wrote:
It is available for download the last beta version 7.1.3b for Windows.
If some user has download the previous 7.1.2b version, is recommended to update to this new
version to avoid some errors reading ascii results with time steps, and generating quadratic elements.
The GiD Team
--
--------------------------------------------------------------------------------
Miguel A. de Riera Pasenau miguel at cimne.upc.es http://gid.cimne.upc.es
· materials can be unassigned individually or by books
· quadratic elements are drawn in pre- and in post- (cuts are stil done
as if these elements where linear . . .).
in the preferences window, folder 'graphic' there is a option menu
with the label 'draw quadratic element' with the options:
No: the quadratic elements are drawn as linear ones.
AsLine: the quadratic elements are drawn using lines between then nodes,
filled triangles/cuadrilaterals are subdivided in triangles.
AsCurve: the quadratic lines/edges are drawn as parabolas.
filled triangles/cuadrilaterals are still subdivided in triangles.
· some bugs corrections:
errors while reading some gausspoints and drawing tetras&hexas
enchancements while reading Femap ascii neutral format
interpolation errors of results over cuts when some results are not
defined on some nodes ( the legend showed 1..e+38/-1..e+38)
enchancements in SurfMesh
· new 'ResultGroup' block in ASCII postprocess data files to write results
grouped like this:
ResultGroup "Load Analysis" 1 OnNodes
ResultDescription "prueba rangos" Scalar
ResultDescription "ESCALAR DE PRUEBA" Scalar
ResultDescription "Desplacements" Vector
ResultDescription "Nodal Stresses" Matrix
Values
1 0.0 0.0 0.0 0.0 0.0 0.55014E+00 0.97276E-01 -0.15427E+00 0.0 0.0 0.0
...
116 7.4978158e-01 0.24357E-04 0.24357E-04 -0.18974E-03 0.0 0.21668E-02 -0.96841E-02 -0.23115E-01 0.0 0.0 0.0
End Values
· separated line options for line elements and streamlines
· changed .flavia.res .flavia.msh to .post.res and .post.res, which is more
descriptive. .flavia.* is still supported.
· the boundaries of the meshes/set can be saved in post: boundaries of
tetras/hexas/cuads/lines/points are triangles/cuads/lines/lines/none/none
with its nodal results.
Enrique Escolano wrote:
It is available for download the last beta version 7.1.3b for Windows.
If some user has download the previous 7.1.2b version, is recommended to update to this new
version to avoid some errors reading ascii results with time steps, and generating quadratic elements.
The GiD Team
--
--------------------------------------------------------------------------------
Miguel A. de Riera Pasenau miguel at cimne.upc.es http://gid.cimne.upc.es
-
Kristian
SV: [GiDlist] New beta version 7.1.3b for Windows
Hi,
I'm having some problems with cylinder-cylinder intersection. I need only a
shell model (no volumes). Is it possible to do this?
Kristian Krabbenhoft
-----Oprindelig meddelelse-----
Fra: gidlist-admin at gatxan.cimne.upc.es
[mailto:gidlist-admin at gatxan.cimne.upc.es]På vegne af Enrique Escolano
Sendt: 30. oktober 2002 20:14
Til: gidlist at gatxan.cimne.upc.es
Emne: [GiDlist] New beta version 7.1.3b for Windows
It is available for download the last beta version 7.1.3b for Windows.
If some user has download the previous 7.1.2b version, is recommended to
update to this new
version to avoid some errors reading ascii results with time steps, and
generating quadratic elements.
The GiD Team
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20021101/e7032a89/attachment.htm
I'm having some problems with cylinder-cylinder intersection. I need only a
shell model (no volumes). Is it possible to do this?
Kristian Krabbenhoft
-----Oprindelig meddelelse-----
Fra: gidlist-admin at gatxan.cimne.upc.es
[mailto:gidlist-admin at gatxan.cimne.upc.es]På vegne af Enrique Escolano
Sendt: 30. oktober 2002 20:14
Til: gidlist at gatxan.cimne.upc.es
Emne: [GiDlist] New beta version 7.1.3b for Windows
It is available for download the last beta version 7.1.3b for Windows.
If some user has download the previous 7.1.2b version, is recommended to
update to this new
version to avoid some errors reading ascii results with time steps, and
generating quadratic elements.
The GiD Team
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20021101/e7032a89/attachment.htm
-
Enrique Escolano
[GiDlist] New beta version 7.1.3b for Windows
You can intersect surface-surface, or multiple surfaces. Also you can create the auxiliary volumes, use some boolean operation, and after delete the volumes.
Please, if your intersection surface-surface fails, send us you GiD geometric model (.geo file).
Enrique Escolano
----- Original Message -----
From: Kristian
To: gidlist at gatxan.cimne.upc.es
Sent: Friday, November 01, 2002 12:27 PM
Subject: SV: [GiDlist] New beta version 7.1.3b for Windows
Hi,
I'm having some problems with cylinder-cylinder intersection. I need only a shell model (no volumes). Is it possible to do this?
Kristian Krabbenhoft
-----Oprindelig meddelelse-----
Fra: gidlist-admin at gatxan.cimne.upc.es [mailto:gidlist-admin at gatxan.cimne.upc.es]På vegne af Enrique Escolano
Sendt: 30. oktober 2002 20:14
Til: gidlist at gatxan.cimne.upc.es
Emne: [GiDlist] New beta version 7.1.3b for Windows
It is available for download the last beta version 7.1.3b for Windows.
If some user has download the previous 7.1.2b version, is recommended to update to this new
version to avoid some errors reading ascii results with time steps, and generating quadratic elements.
The GiD Team
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20021104/79e3e9ca/attachment.htm
Please, if your intersection surface-surface fails, send us you GiD geometric model (.geo file).
Enrique Escolano
----- Original Message -----
From: Kristian
To: gidlist at gatxan.cimne.upc.es
Sent: Friday, November 01, 2002 12:27 PM
Subject: SV: [GiDlist] New beta version 7.1.3b for Windows
Hi,
I'm having some problems with cylinder-cylinder intersection. I need only a shell model (no volumes). Is it possible to do this?
Kristian Krabbenhoft
-----Oprindelig meddelelse-----
Fra: gidlist-admin at gatxan.cimne.upc.es [mailto:gidlist-admin at gatxan.cimne.upc.es]På vegne af Enrique Escolano
Sendt: 30. oktober 2002 20:14
Til: gidlist at gatxan.cimne.upc.es
Emne: [GiDlist] New beta version 7.1.3b for Windows
It is available for download the last beta version 7.1.3b for Windows.
If some user has download the previous 7.1.2b version, is recommended to update to this new
version to avoid some errors reading ascii results with time steps, and generating quadratic elements.
The GiD Team
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20021104/79e3e9ca/attachment.htm
-
Kristian
SV: [GiDlist] New beta version 7.1.3b for Windows
Dear Enrique,
I have no problems making the actual intersection. The problems come when I
try to create the nurb with a hole on the side of the cylinder. I send you
the file. Hopefully you can see what I'm trying to do.
Regards,
Kristian.
-----Oprindelig meddelelse-----
Fra: gidlist-admin at gatxan.cimne.upc.es
[mailto:gidlist-admin at gatxan.cimne.upc.es]På vegne af Enrique Escolano
Sendt: 4. november 2002 10:55
Til: gidlist at gatxan.cimne.upc.es
Emne: Re: [GiDlist] New beta version 7.1.3b for Windows
You can intersect surface-surface, or multiple surfaces. Also you can
create the auxiliary volumes, use some boolean operation, and after delete
the volumes.
Please, if your intersection surface-surface fails, send us you GiD
geometric model (.geo file).
Enrique Escolano
----- Original Message -----
From: Kristian
To: gidlist at gatxan.cimne.upc.es
Sent: Friday, November 01, 2002 12:27 PM
Subject: SV: [GiDlist] New beta version 7.1.3b for Windows
Hi,
I'm having some problems with cylinder-cylinder intersection. I need
only a shell model (no volumes). Is it possible to do this?
Kristian Krabbenhoft
-----Oprindelig meddelelse-----
Fra: gidlist-admin at gatxan.cimne.upc.es
[mailto:gidlist-admin at gatxan.cimne.upc.es]På vegne af Enrique Escolano
Sendt: 30. oktober 2002 20:14
Til: gidlist at gatxan.cimne.upc.es
Emne: [GiDlist] New beta version 7.1.3b for Windows
It is available for download the last beta version 7.1.3b for Windows.
If some user has download the previous 7.1.2b version, is recommended
to update to this new
version to avoid some errors reading ascii results with time steps,
and generating quadratic elements.
The GiD Team
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20021104/5a077e84/attachment.htm
-------------- next part --------------
A non-text attachment was scrubbed...
Name: intersect.geo
Type: application/octet-stream
Size: 11768 bytes
Desc: not available
Url : http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20021104/5a077e84/attachment.obj
I have no problems making the actual intersection. The problems come when I
try to create the nurb with a hole on the side of the cylinder. I send you
the file. Hopefully you can see what I'm trying to do.
Regards,
Kristian.
-----Oprindelig meddelelse-----
Fra: gidlist-admin at gatxan.cimne.upc.es
[mailto:gidlist-admin at gatxan.cimne.upc.es]På vegne af Enrique Escolano
Sendt: 4. november 2002 10:55
Til: gidlist at gatxan.cimne.upc.es
Emne: Re: [GiDlist] New beta version 7.1.3b for Windows
You can intersect surface-surface, or multiple surfaces. Also you can
create the auxiliary volumes, use some boolean operation, and after delete
the volumes.
Please, if your intersection surface-surface fails, send us you GiD
geometric model (.geo file).
Enrique Escolano
----- Original Message -----
From: Kristian
To: gidlist at gatxan.cimne.upc.es
Sent: Friday, November 01, 2002 12:27 PM
Subject: SV: [GiDlist] New beta version 7.1.3b for Windows
Hi,
I'm having some problems with cylinder-cylinder intersection. I need
only a shell model (no volumes). Is it possible to do this?
Kristian Krabbenhoft
-----Oprindelig meddelelse-----
Fra: gidlist-admin at gatxan.cimne.upc.es
[mailto:gidlist-admin at gatxan.cimne.upc.es]På vegne af Enrique Escolano
Sendt: 30. oktober 2002 20:14
Til: gidlist at gatxan.cimne.upc.es
Emne: [GiDlist] New beta version 7.1.3b for Windows
It is available for download the last beta version 7.1.3b for Windows.
If some user has download the previous 7.1.2b version, is recommended
to update to this new
version to avoid some errors reading ascii results with time steps,
and generating quadratic elements.
The GiD Team
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20021104/5a077e84/attachment.htm
-------------- next part --------------
A non-text attachment was scrubbed...
Name: intersect.geo
Type: application/octet-stream
Size: 11768 bytes
Desc: not available
Url : http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20021104/5a077e84/attachment.obj
-
Enrique Escolano
[GiDlist] New beta version 7.1.3b for Windows
You need to create a hole in a Surface:
First create the missing cylinder surface (for example, use a copy of the opposite surface, with a mirror)
To add the hole to this surface pick the menu:Geometry-Edit-Hole NURBS Surface, then select the surface, and the lines over this surface to define the hole loop.
I' attach your file with this modifications.
Enrique
----- Original Message -----
From: Kristian
To: gidlist at gatxan.cimne.upc.es
Sent: Monday, November 04, 2002 2:19 PM
Subject: SV: [GiDlist] New beta version 7.1.3b for Windows
Dear Enrique,
I have no problems making the actual intersection. The problems come when I try to create the nurb with a hole on the side of the cylinder. I send you the file. Hopefully you can see what I'm trying to do.
Regards,
Kristian.
-----Oprindelig meddelelse-----
Fra: gidlist-admin at gatxan.cimne.upc.es [mailto:gidlist-admin at gatxan.cimne.upc.es]På vegne af Enrique Escolano
Sendt: 4. november 2002 10:55
Til: gidlist at gatxan.cimne.upc.es
Emne: Re: [GiDlist] New beta version 7.1.3b for Windows
You can intersect surface-surface, or multiple surfaces. Also you can create the auxiliary volumes, use some boolean operation, and after delete the volumes.
Please, if your intersection surface-surface fails, send us you GiD geometric model (.geo file).
Enrique Escolano
----- Original Message -----
From: Kristian
To: gidlist at gatxan.cimne.upc.es
Sent: Friday, November 01, 2002 12:27 PM
Subject: SV: [GiDlist] New beta version 7.1.3b for Windows
Hi,
I'm having some problems with cylinder-cylinder intersection. I need only a shell model (no volumes). Is it possible to do this?
Kristian Krabbenhoft
-----Oprindelig meddelelse-----
Fra: gidlist-admin at gatxan.cimne.upc.es [mailto:gidlist-admin at gatxan.cimne.upc.es]På vegne af Enrique Escolano
Sendt: 30. oktober 2002 20:14
Til: gidlist at gatxan.cimne.upc.es
Emne: [GiDlist] New beta version 7.1.3b for Windows
It is available for download the last beta version 7.1.3b for Windows.
If some user has download the previous 7.1.2b version, is recommended to update to this new
version to avoid some errors reading ascii results with time steps, and generating quadratic elements.
The GiD Team
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20021104/c7f33f7f/attachment.htm
-------------- next part --------------
A non-text attachment was scrubbed...
Name: intersect.geo
Type: application/octet-stream
Size: 12470 bytes
Desc: not available
Url : http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20021104/c7f33f7f/attachment.obj
First create the missing cylinder surface (for example, use a copy of the opposite surface, with a mirror)
To add the hole to this surface pick the menu:Geometry-Edit-Hole NURBS Surface, then select the surface, and the lines over this surface to define the hole loop.
I' attach your file with this modifications.
Enrique
----- Original Message -----
From: Kristian
To: gidlist at gatxan.cimne.upc.es
Sent: Monday, November 04, 2002 2:19 PM
Subject: SV: [GiDlist] New beta version 7.1.3b for Windows
Dear Enrique,
I have no problems making the actual intersection. The problems come when I try to create the nurb with a hole on the side of the cylinder. I send you the file. Hopefully you can see what I'm trying to do.
Regards,
Kristian.
-----Oprindelig meddelelse-----
Fra: gidlist-admin at gatxan.cimne.upc.es [mailto:gidlist-admin at gatxan.cimne.upc.es]På vegne af Enrique Escolano
Sendt: 4. november 2002 10:55
Til: gidlist at gatxan.cimne.upc.es
Emne: Re: [GiDlist] New beta version 7.1.3b for Windows
You can intersect surface-surface, or multiple surfaces. Also you can create the auxiliary volumes, use some boolean operation, and after delete the volumes.
Please, if your intersection surface-surface fails, send us you GiD geometric model (.geo file).
Enrique Escolano
----- Original Message -----
From: Kristian
To: gidlist at gatxan.cimne.upc.es
Sent: Friday, November 01, 2002 12:27 PM
Subject: SV: [GiDlist] New beta version 7.1.3b for Windows
Hi,
I'm having some problems with cylinder-cylinder intersection. I need only a shell model (no volumes). Is it possible to do this?
Kristian Krabbenhoft
-----Oprindelig meddelelse-----
Fra: gidlist-admin at gatxan.cimne.upc.es [mailto:gidlist-admin at gatxan.cimne.upc.es]På vegne af Enrique Escolano
Sendt: 30. oktober 2002 20:14
Til: gidlist at gatxan.cimne.upc.es
Emne: [GiDlist] New beta version 7.1.3b for Windows
It is available for download the last beta version 7.1.3b for Windows.
If some user has download the previous 7.1.2b version, is recommended to update to this new
version to avoid some errors reading ascii results with time steps, and generating quadratic elements.
The GiD Team
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20021104/c7f33f7f/attachment.htm
-------------- next part --------------
A non-text attachment was scrubbed...
Name: intersect.geo
Type: application/octet-stream
Size: 12470 bytes
Desc: not available
Url : http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20021104/c7f33f7f/attachment.obj
-
Kristian
SV: [GiDlist] New beta version 7.1.3b for Windows
Thanks a lot.
-----Oprindelig meddelelse-----
Fra: gidlist-admin at gatxan.cimne.upc.es
[mailto:gidlist-admin at gatxan.cimne.upc.es]På vegne af Enrique Escolano
Sendt: 4. november 2002 15:28
Til: gidlist at gatxan.cimne.upc.es
Emne: Re: [GiDlist] New beta version 7.1.3b for Windows
You need to create a hole in a Surface:
First create the missing cylinder surface (for example, use a copy of the
opposite surface, with a mirror)
To add the hole to this surface pick the menu:Geometry-Edit-Hole NURBS
Surface, then select the surface, and the lines over this surface to define
the hole loop.
I' attach your file with this modifications.
Enrique
----- Original Message -----
From: Kristian
To: gidlist at gatxan.cimne.upc.es
Sent: Monday, November 04, 2002 2:19 PM
Subject: SV: [GiDlist] New beta version 7.1.3b for Windows
Dear Enrique,
I have no problems making the actual intersection. The problems come
when I try to create the nurb with a hole on the side of the cylinder. I
send you the file. Hopefully you can see what I'm trying to do.
Regards,
Kristian.
-----Oprindelig meddelelse-----
Fra: gidlist-admin at gatxan.cimne.upc.es
[mailto:gidlist-admin at gatxan.cimne.upc.es]På vegne af Enrique Escolano
Sendt: 4. november 2002 10:55
Til: gidlist at gatxan.cimne.upc.es
Emne: Re: [GiDlist] New beta version 7.1.3b for Windows
You can intersect surface-surface, or multiple surfaces. Also you can
create the auxiliary volumes, use some boolean operation, and after delete
the volumes.
Please, if your intersection surface-surface fails, send us you GiD
geometric model (.geo file).
Enrique Escolano
----- Original Message -----
From: Kristian
To: gidlist at gatxan.cimne.upc.es
Sent: Friday, November 01, 2002 12:27 PM
Subject: SV: [GiDlist] New beta version 7.1.3b for Windows
Hi,
I'm having some problems with cylinder-cylinder intersection. I need
only a shell model (no volumes). Is it possible to do this?
Kristian Krabbenhoft
-----Oprindelig meddelelse-----
Fra: gidlist-admin at gatxan.cimne.upc.es
[mailto:gidlist-admin at gatxan.cimne.upc.es]På vegne af Enrique Escolano
Sendt: 30. oktober 2002 20:14
Til: gidlist at gatxan.cimne.upc.es
Emne: [GiDlist] New beta version 7.1.3b for Windows
It is available for download the last beta version 7.1.3b for
Windows.
If some user has download the previous 7.1.2b version, is
recommended to update to this new
version to avoid some errors reading ascii results with time
steps, and generating quadratic elements.
The GiD Team
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20021104/6eae63bf/attachment.htm
-----Oprindelig meddelelse-----
Fra: gidlist-admin at gatxan.cimne.upc.es
[mailto:gidlist-admin at gatxan.cimne.upc.es]På vegne af Enrique Escolano
Sendt: 4. november 2002 15:28
Til: gidlist at gatxan.cimne.upc.es
Emne: Re: [GiDlist] New beta version 7.1.3b for Windows
You need to create a hole in a Surface:
First create the missing cylinder surface (for example, use a copy of the
opposite surface, with a mirror)
To add the hole to this surface pick the menu:Geometry-Edit-Hole NURBS
Surface, then select the surface, and the lines over this surface to define
the hole loop.
I' attach your file with this modifications.
Enrique
----- Original Message -----
From: Kristian
To: gidlist at gatxan.cimne.upc.es
Sent: Monday, November 04, 2002 2:19 PM
Subject: SV: [GiDlist] New beta version 7.1.3b for Windows
Dear Enrique,
I have no problems making the actual intersection. The problems come
when I try to create the nurb with a hole on the side of the cylinder. I
send you the file. Hopefully you can see what I'm trying to do.
Regards,
Kristian.
-----Oprindelig meddelelse-----
Fra: gidlist-admin at gatxan.cimne.upc.es
[mailto:gidlist-admin at gatxan.cimne.upc.es]På vegne af Enrique Escolano
Sendt: 4. november 2002 10:55
Til: gidlist at gatxan.cimne.upc.es
Emne: Re: [GiDlist] New beta version 7.1.3b for Windows
You can intersect surface-surface, or multiple surfaces. Also you can
create the auxiliary volumes, use some boolean operation, and after delete
the volumes.
Please, if your intersection surface-surface fails, send us you GiD
geometric model (.geo file).
Enrique Escolano
----- Original Message -----
From: Kristian
To: gidlist at gatxan.cimne.upc.es
Sent: Friday, November 01, 2002 12:27 PM
Subject: SV: [GiDlist] New beta version 7.1.3b for Windows
Hi,
I'm having some problems with cylinder-cylinder intersection. I need
only a shell model (no volumes). Is it possible to do this?
Kristian Krabbenhoft
-----Oprindelig meddelelse-----
Fra: gidlist-admin at gatxan.cimne.upc.es
[mailto:gidlist-admin at gatxan.cimne.upc.es]På vegne af Enrique Escolano
Sendt: 30. oktober 2002 20:14
Til: gidlist at gatxan.cimne.upc.es
Emne: [GiDlist] New beta version 7.1.3b for Windows
It is available for download the last beta version 7.1.3b for
Windows.
If some user has download the previous 7.1.2b version, is
recommended to update to this new
version to avoid some errors reading ascii results with time
steps, and generating quadratic elements.
The GiD Team
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20021104/6eae63bf/attachment.htm