[GiDlist] Tutorial: On calculate I get message "Problem typ

Moderator: GiD Team

Post Reply
Paul Pikowsky

[GiDlist] Tutorial: On calculate I get message "Problem typ

Post by Paul Pikowsky »

I have been running the tutorial with some success, but I have been having a
few problems with errors about files not being found. First it was just the
help files, but this was not a serious problem. Now when I try to run the
calculations for the RamSeries4 module I am getting the message:

"Problem type 'RamSeries4/ramsolid' can't be found"

When I open the Help file I get the message:

"couldn't open '../GID/info/html-version/
../GID/info/html-version/intro/intro.html': no such file or directory"

/GID/ is the directory I created to put my copy of GiD in. What is going
wrong? Where can I make the adjustments so that my files can be found?

My system is Linux Red Hat 7.3 with the 2.4.18-10 kernel

Paul Pikowsky, pksky at finestplanet.com
Enrique Escolano

[GiDlist] Tutorial: On calculate I get message "Problem typ

Post by Enrique Escolano »

inside the directory GID must be located gid.exe and other files, and this
directories tree:

GID
|--bitmaps
|--Examples
|--info
| |---html-version
| |--- ...
|
|--problemtypes
| |---RamSeries4
| | |----rambshell
| | |----ramsolid
| |------other problem types ...
|
|--scripts
|--symbols
|--templates

Note: you must copy the problemtype RamSeries4 inside /problemtypes:

Enrique Escolano

----- Original Message -----
From: "Paul Pikowsky" pksky at finestplanet.com
To: gidlist at gatxan.cimne.upc.es
Sent: Wednesday, September 18, 2002 5:21 AM
Subject: [GiDlist] Tutorial: On calculate I get message "Problem type
'RamSeries4/ramsolid' can't be found"


I have been running the tutorial with some success, but I have been having
a
few problems with errors about files not being found. First it was just
the
help files, but this was not a serious problem. Now when I try to run the
calculations for the RamSeries4 module I am getting the message:

"Problem type 'RamSeries4/ramsolid' can't be found"

When I open the Help file I get the message:

"couldn't open '../GID/info/html-version/
../GID/info/html-version/intro/intro.html': no such file or directory"

/GID/ is the directory I created to put my copy of GiD in. What is going
wrong? Where can I make the adjustments so that my files can be found?

My system is Linux Red Hat 7.3 with the 2.4.18-10 kernel

Paul Pikowsky, pksky at finestplanet.com
_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist

Ramon Ribó

[GiDlist] Tutorial: On calculate I get message "Problem typ

Post by Ramon Ribó »

Hello,

To have RamSolid installed, just try:

Data-Problemtypes-Internet retrieve-RamSeries (inside GiD)

You can retrieve an automatic test password in: http://www.compassis.com

Regards,

--
Compass Ing. y Sistemas Dr. Ramon Ribó
http://www.compassis.com ramsan at compassis.com
c/ Manuel Girona, 61 bajos tel. +34 93 204 10 82
08034 Barcelona, Spain fax. +34 93 204 19 09

-----Mensaje original-----
De: gidlist-admin at gatxan.cimne.upc.es
[mailto:gidlist-admin at gatxan.cimne.upc.es]En nombre de Enrique Escolano
Enviado el: miércoles, 18 de septiembre de 2002 21:09
Para: gidlist at gatxan.cimne.upc.es
Asunto: Re: [GiDlist] Tutorial: On calculate I get message "Problem type
'RamSeries4/ramsolid' can't be found"


inside the directory GID must be located gid.exe and other files, and this
directories tree:

GID
|--bitmaps
|--Examples
|--info
| |---html-version
| |--- ...
|
|--problemtypes
| |---RamSeries4
| | |----rambshell
| | |----ramsolid
| |------other problem types ...
|
|--scripts
|--symbols
|--templates

Note: you must copy the problemtype RamSeries4 inside /problemtypes:

Enrique Escolano

----- Original Message -----
From: "Paul Pikowsky" pksky at finestplanet.com
To: gidlist at gatxan.cimne.upc.es
Sent: Wednesday, September 18, 2002 5:21 AM
Subject: [GiDlist] Tutorial: On calculate I get message "Problem type
'RamSeries4/ramsolid' can't be found"


I have been running the tutorial with some success, but I have been having
a
few problems with errors about files not being found. First it was just
the
help files, but this was not a serious problem. Now when I try to run the
calculations for the RamSeries4 module I am getting the message:

"Problem type 'RamSeries4/ramsolid' can't be found"

When I open the Help file I get the message:

"couldn't open '../GID/info/html-version/
../GID/info/html-version/intro/intro.html': no such file or directory"

/GID/ is the directory I created to put my copy of GiD in. What is going
wrong? Where can I make the adjustments so that my files can be found?

My system is Linux Red Hat 7.3 with the 2.4.18-10 kernel

Paul Pikowsky, pksky at finestplanet.com
_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist


_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist
Post Reply