Dear GID members,
I think there is a problem when we visualize
results on gauss points(4pts) for quadratic
tetrahedral elements.
-----------------------------------------------------
Example:
in res file.
GaussPoints "Gauss" ElemType Tetrahedra
Number Of Gauss Points: 4
Natural Coordinates: Internal
End Gausspoints
RESULT "Pressure Profile" "SimpleCase" 1 Scalar
OnGaussPoints "Gauss"
Values
1 1.0
1.0
0.0
1.0
End Values
----------------------------------------------------
Then you'll see the bug in one of the faces of the
tetrahedra.
Does anybody have the same problem?
thanks,
kenji furui
The University of Texas at Austin
USA
__________________________________________________
Do You Yahoo!?
Yahoo! Finance - Get real-time stock quotes
http://finance.yahoo.com
[GiDlist] results on gauss points for tetrahedras .
Moderator: GiD Team
[GiDlist] results on gauss points for tetrahedras .
Hi Kenji
As my experience, to get the smooth contour of the
results,in GiD, you have to have the result values on
the nodal points, not in Gauss points. YOu can have or
plot results on Gauss points but your Post-processing
result will not be smooth as expected. YOu know that
the results of FEM never smooth by element to element.
I don't know if GiD.7 can plot the results on Gauss
point as a colored ball.
regards.
--- kenji furui petrocowboy at yahoo.com wrote:
Dear GID members,
I think there is a problem when we visualize
results on gauss points(4pts) for quadratic
tetrahedral elements.
-----------------------------------------------------
Example:
in res file.
GaussPoints "Gauss" ElemType Tetrahedra
Number Of Gauss Points: 4
Natural Coordinates: Internal
End Gausspoints
RESULT "Pressure Profile" "SimpleCase" 1 Scalar
OnGaussPoints "Gauss"
Values
1 1.0
1.0
0.0
1.0
End Values
----------------------------------------------------
Then you'll see the bug in one of the faces of the
tetrahedra.
Does anybody have the same problem?
thanks,
kenji furui
The University of Texas at Austin
USA
__________________________________________________
Do You Yahoo!?
Yahoo! Finance - Get real-time stock quotes
http://finance.yahoo.com
_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist
__________________________________________________
Do You Yahoo!?
Yahoo! Finance - Get real-time stock quotes
http://finance.yahoo.com
As my experience, to get the smooth contour of the
results,in GiD, you have to have the result values on
the nodal points, not in Gauss points. YOu can have or
plot results on Gauss points but your Post-processing
result will not be smooth as expected. YOu know that
the results of FEM never smooth by element to element.
I don't know if GiD.7 can plot the results on Gauss
point as a colored ball.
regards.
--- kenji furui petrocowboy at yahoo.com wrote:
Dear GID members,
I think there is a problem when we visualize
results on gauss points(4pts) for quadratic
tetrahedral elements.
-----------------------------------------------------
Example:
in res file.
GaussPoints "Gauss" ElemType Tetrahedra
Number Of Gauss Points: 4
Natural Coordinates: Internal
End Gausspoints
RESULT "Pressure Profile" "SimpleCase" 1 Scalar
OnGaussPoints "Gauss"
Values
1 1.0
1.0
0.0
1.0
End Values
----------------------------------------------------
Then you'll see the bug in one of the faces of the
tetrahedra.
Does anybody have the same problem?
thanks,
kenji furui
The University of Texas at Austin
USA
__________________________________________________
Do You Yahoo!?
Yahoo! Finance - Get real-time stock quotes
http://finance.yahoo.com
_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist
__________________________________________________
Do You Yahoo!?
Yahoo! Finance - Get real-time stock quotes
http://finance.yahoo.com
[GiDlist] results on gauss points for tetrahedras .
Please, send us the complete files .flavia.res and .flavia.msh
(or all the GiD model files if not exist this .flavia.msh)
Specify also as it is the GiD version used.
Enrique
----- Original Message -----
From: "kenji furui" petrocowboy at yahoo.com
To: gidlist at gatxan.cimne.upc.es
Sent: Friday, September 06, 2002 12:18 AM
Subject: [GiDlist] results on gauss points for tetrahedras .
Dear GID members,
I think there is a problem when we visualize
results on gauss points(4pts) for quadratic
tetrahedral elements.
-----------------------------------------------------
Example:
in res file.
GaussPoints "Gauss" ElemType Tetrahedra
Number Of Gauss Points: 4
Natural Coordinates: Internal
End Gausspoints
RESULT "Pressure Profile" "SimpleCase" 1 Scalar
OnGaussPoints "Gauss"
Values
1 1.0
1.0
0.0
1.0
End Values
----------------------------------------------------
Then you'll see the bug in one of the faces of the
tetrahedra.
Does anybody have the same problem?
thanks,
kenji furui
The University of Texas at Austin
USA
__________________________________________________
Do You Yahoo!?
Yahoo! Finance - Get real-time stock quotes
http://finance.yahoo.com
_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist
(or all the GiD model files if not exist this .flavia.msh)
Specify also as it is the GiD version used.
Enrique
----- Original Message -----
From: "kenji furui" petrocowboy at yahoo.com
To: gidlist at gatxan.cimne.upc.es
Sent: Friday, September 06, 2002 12:18 AM
Subject: [GiDlist] results on gauss points for tetrahedras .
Dear GID members,
I think there is a problem when we visualize
results on gauss points(4pts) for quadratic
tetrahedral elements.
-----------------------------------------------------
Example:
in res file.
GaussPoints "Gauss" ElemType Tetrahedra
Number Of Gauss Points: 4
Natural Coordinates: Internal
End Gausspoints
RESULT "Pressure Profile" "SimpleCase" 1 Scalar
OnGaussPoints "Gauss"
Values
1 1.0
1.0
0.0
1.0
End Values
----------------------------------------------------
Then you'll see the bug in one of the faces of the
tetrahedra.
Does anybody have the same problem?
thanks,
kenji furui
The University of Texas at Austin
USA
__________________________________________________
Do You Yahoo!?
Yahoo! Finance - Get real-time stock quotes
http://finance.yahoo.com
_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist
[GiDlist] results on gauss points for tetrahedras .
Dear Enrique,
This is the simple example.
Please take a look at all faces of the tetrahedra.
One of the face shows the bug.
thanks,
kenji
--- Enrique Escolano escolano at cimne.upc.es wrote:
Please, send us the complete files .flavia.res and
.flavia.msh
(or all the GiD model files if not exist this
.flavia.msh)
Specify also as it is the GiD version used.
Enrique
----- Original Message -----
From: "kenji furui" petrocowboy at yahoo.com
To: gidlist at gatxan.cimne.upc.es
Sent: Friday, September 06, 2002 12:18 AM
Subject: [GiDlist] results on gauss points for
tetrahedras .
Dear GID members,
I think there is a problem when we visualize
results on gauss points(4pts) for quadratic
tetrahedral elements.
-----------------------------------------------------
Example:
in res file.
GaussPoints "Gauss" ElemType Tetrahedra
Number Of Gauss Points: 4
Natural Coordinates: Internal
End Gausspoints
RESULT "Pressure Profile" "SimpleCase" 1 Scalar
OnGaussPoints "Gauss"
Values
1 1.0
1.0
0.0
1.0
End Values
----------------------------------------------------
Then you'll see the bug in one of the faces of the
tetrahedra.
Does anybody have the same problem?
thanks,
kenji furui
The University of Texas at Austin
USA
__________________________________________________
Do You Yahoo!?
Yahoo! Finance - Get real-time stock quotes
http://finance.yahoo.com
_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist
_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist
__________________________________________________
Do You Yahoo!?
Yahoo! Finance - Get real-time stock quotes
http://finance.yahoo.com
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: cube.flavia.msh
Url: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20020906/e08cb06b/attachment.txt
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: cube.flavia.res
Url: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20020906/e08cb06b/attachment-0001.txt
This is the simple example.
Please take a look at all faces of the tetrahedra.
One of the face shows the bug.
thanks,
kenji
--- Enrique Escolano escolano at cimne.upc.es wrote:
Please, send us the complete files .flavia.res and
.flavia.msh
(or all the GiD model files if not exist this
.flavia.msh)
Specify also as it is the GiD version used.
Enrique
----- Original Message -----
From: "kenji furui" petrocowboy at yahoo.com
To: gidlist at gatxan.cimne.upc.es
Sent: Friday, September 06, 2002 12:18 AM
Subject: [GiDlist] results on gauss points for
tetrahedras .
Dear GID members,
I think there is a problem when we visualize
results on gauss points(4pts) for quadratic
tetrahedral elements.
-----------------------------------------------------
Example:
in res file.
GaussPoints "Gauss" ElemType Tetrahedra
Number Of Gauss Points: 4
Natural Coordinates: Internal
End Gausspoints
RESULT "Pressure Profile" "SimpleCase" 1 Scalar
OnGaussPoints "Gauss"
Values
1 1.0
1.0
0.0
1.0
End Values
----------------------------------------------------
Then you'll see the bug in one of the faces of the
tetrahedra.
Does anybody have the same problem?
thanks,
kenji furui
The University of Texas at Austin
USA
__________________________________________________
Do You Yahoo!?
Yahoo! Finance - Get real-time stock quotes
http://finance.yahoo.com
_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist
_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist
__________________________________________________
Do You Yahoo!?
Yahoo! Finance - Get real-time stock quotes
http://finance.yahoo.com
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: cube.flavia.msh
Url: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20020906/e08cb06b/attachment.txt
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: cube.flavia.res
Url: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20020906/e08cb06b/attachment-0001.txt
[GiDlist] results on gauss points for tetrahedras .
I'm using GiD ver7.1.
kenji
--- Enrique Escolano escolano at cimne.upc.es wrote:
Please, send us the complete files .flavia.res and
.flavia.msh
(or all the GiD model files if not exist this
.flavia.msh)
Specify also as it is the GiD version used.
Enrique
----- Original Message -----
From: "kenji furui" petrocowboy at yahoo.com
To: gidlist at gatxan.cimne.upc.es
Sent: Friday, September 06, 2002 12:18 AM
Subject: [GiDlist] results on gauss points for
tetrahedras .
Dear GID members,
I think there is a problem when we visualize
results on gauss points(4pts) for quadratic
tetrahedral elements.
-----------------------------------------------------
Example:
in res file.
GaussPoints "Gauss" ElemType Tetrahedra
Number Of Gauss Points: 4
Natural Coordinates: Internal
End Gausspoints
RESULT "Pressure Profile" "SimpleCase" 1 Scalar
OnGaussPoints "Gauss"
Values
1 1.0
1.0
0.0
1.0
End Values
----------------------------------------------------
Then you'll see the bug in one of the faces of the
tetrahedra.
Does anybody have the same problem?
thanks,
kenji furui
The University of Texas at Austin
USA
__________________________________________________
Do You Yahoo!?
Yahoo! Finance - Get real-time stock quotes
http://finance.yahoo.com
_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist
_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist
__________________________________________________
Do You Yahoo!?
Yahoo! Finance - Get real-time stock quotes
http://finance.yahoo.com
kenji
--- Enrique Escolano escolano at cimne.upc.es wrote:
Please, send us the complete files .flavia.res and
.flavia.msh
(or all the GiD model files if not exist this
.flavia.msh)
Specify also as it is the GiD version used.
Enrique
----- Original Message -----
From: "kenji furui" petrocowboy at yahoo.com
To: gidlist at gatxan.cimne.upc.es
Sent: Friday, September 06, 2002 12:18 AM
Subject: [GiDlist] results on gauss points for
tetrahedras .
Dear GID members,
I think there is a problem when we visualize
results on gauss points(4pts) for quadratic
tetrahedral elements.
-----------------------------------------------------
Example:
in res file.
GaussPoints "Gauss" ElemType Tetrahedra
Number Of Gauss Points: 4
Natural Coordinates: Internal
End Gausspoints
RESULT "Pressure Profile" "SimpleCase" 1 Scalar
OnGaussPoints "Gauss"
Values
1 1.0
1.0
0.0
1.0
End Values
----------------------------------------------------
Then you'll see the bug in one of the faces of the
tetrahedra.
Does anybody have the same problem?
thanks,
kenji furui
The University of Texas at Austin
USA
__________________________________________________
Do You Yahoo!?
Yahoo! Finance - Get real-time stock quotes
http://finance.yahoo.com
_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist
_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist
__________________________________________________
Do You Yahoo!?
Yahoo! Finance - Get real-time stock quotes
http://finance.yahoo.com
[GiDlist] results on gauss points for tetrahedras .
It seems a bug of GiD postprocessing results on tetrahedrals with 4 gauss
points.
Use until a corrected version only 1 gauss point or extrapolate with your
code the results to the nodes
Thanks by your bug report.
Enrique Escolano.
----- Original Message -----
From: "kenji furui" petrocowboy at yahoo.com
To: gidlist at gatxan.cimne.upc.es
Sent: Friday, September 06, 2002 3:07 PM
Subject: Re: [GiDlist] results on gauss points for tetrahedras .
Dear Enrique,
This is the simple example.
Please take a look at all faces of the tetrahedra.
One of the face shows the bug.
thanks,
kenji
--- Enrique Escolano escolano at cimne.upc.es wrote:
Please, send us the complete files .flavia.res and
.flavia.msh
(or all the GiD model files if not exist this
.flavia.msh)
Specify also as it is the GiD version used.
Enrique
----- Original Message -----
From: "kenji furui" petrocowboy at yahoo.com
To: gidlist at gatxan.cimne.upc.es
Sent: Friday, September 06, 2002 12:18 AM
Subject: [GiDlist] results on gauss points for
tetrahedras .
Dear GID members,
I think there is a problem when we visualize
results on gauss points(4pts) for quadratic
tetrahedral elements.
-----------------------------------------------------
Example:
in res file.
GaussPoints "Gauss" ElemType Tetrahedra
Number Of Gauss Points: 4
Natural Coordinates: Internal
End Gausspoints
RESULT "Pressure Profile" "SimpleCase" 1 Scalar
OnGaussPoints "Gauss"
Values
1 1.0
1.0
0.0
1.0
End Values
----------------------------------------------------
Then you'll see the bug in one of the faces of the
tetrahedra.
Does anybody have the same problem?
thanks,
kenji furui
The University of Texas at Austin
USA
__________________________________________________
Do You Yahoo!?
Yahoo! Finance - Get real-time stock quotes
http://finance.yahoo.com
_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist
_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist
__________________________________________________
Do You Yahoo!?
Yahoo! Finance - Get real-time stock quotes
http://finance.yahoo.com
----------------------------------------------------------------------------
----
#MESH OF A TABLE
MESH "board " DIMENSION 3 ELEMTYPE Tetrahedra NNODE 4
COORDINATES
# node num x-coordinate y-coordinate z-coordinate
1 .100000000000E+01 .100000000000E+01
.000000000000E+00
2 .000000000000E+00 .100000000000E+01
.000000000000E+00
3 .100000000000E+01 .000000000000E+00
.000000000000E+00
4 .000000000000E+00 .100000000000E+01
.100000000000E+01
END COORDINATES
ELEMENTS
# elmnum nodal_connectivity() material
1 1 2 3 4 1
END ELEMENTS
----------------------------------------------------------------------------
----
GID POST RESULTS FILE 1.0
GaussPoints "Gauss" ElemType Tetrahedra
Number Of Gauss Points: 4
Natural Coordinates: Given
.585410 .138197 .138197
.138197 .138197 .585410
.138197 .585410 .138197
.138197 .138197 .138197
End Gausspoints
RESULT "Pressure Profile" "Completion Model" 1 Scalar OnGaussPoints
"Gauss"
Values
1 100.
100.
1.
100.
End Values
points.
Use until a corrected version only 1 gauss point or extrapolate with your
code the results to the nodes
Thanks by your bug report.
Enrique Escolano.
----- Original Message -----
From: "kenji furui" petrocowboy at yahoo.com
To: gidlist at gatxan.cimne.upc.es
Sent: Friday, September 06, 2002 3:07 PM
Subject: Re: [GiDlist] results on gauss points for tetrahedras .
Dear Enrique,
This is the simple example.
Please take a look at all faces of the tetrahedra.
One of the face shows the bug.
thanks,
kenji
--- Enrique Escolano escolano at cimne.upc.es wrote:
Please, send us the complete files .flavia.res and
.flavia.msh
(or all the GiD model files if not exist this
.flavia.msh)
Specify also as it is the GiD version used.
Enrique
----- Original Message -----
From: "kenji furui" petrocowboy at yahoo.com
To: gidlist at gatxan.cimne.upc.es
Sent: Friday, September 06, 2002 12:18 AM
Subject: [GiDlist] results on gauss points for
tetrahedras .
Dear GID members,
I think there is a problem when we visualize
results on gauss points(4pts) for quadratic
tetrahedral elements.
-----------------------------------------------------
Example:
in res file.
GaussPoints "Gauss" ElemType Tetrahedra
Number Of Gauss Points: 4
Natural Coordinates: Internal
End Gausspoints
RESULT "Pressure Profile" "SimpleCase" 1 Scalar
OnGaussPoints "Gauss"
Values
1 1.0
1.0
0.0
1.0
End Values
----------------------------------------------------
Then you'll see the bug in one of the faces of the
tetrahedra.
Does anybody have the same problem?
thanks,
kenji furui
The University of Texas at Austin
USA
__________________________________________________
Do You Yahoo!?
Yahoo! Finance - Get real-time stock quotes
http://finance.yahoo.com
_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist
_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist
__________________________________________________
Do You Yahoo!?
Yahoo! Finance - Get real-time stock quotes
http://finance.yahoo.com
----------------------------------------------------------------------------
----
#MESH OF A TABLE
MESH "board " DIMENSION 3 ELEMTYPE Tetrahedra NNODE 4
COORDINATES
# node num x-coordinate y-coordinate z-coordinate
1 .100000000000E+01 .100000000000E+01
.000000000000E+00
2 .000000000000E+00 .100000000000E+01
.000000000000E+00
3 .100000000000E+01 .000000000000E+00
.000000000000E+00
4 .000000000000E+00 .100000000000E+01
.100000000000E+01
END COORDINATES
ELEMENTS
# elmnum nodal_connectivity() material
1 1 2 3 4 1
END ELEMENTS
----------------------------------------------------------------------------
----
GID POST RESULTS FILE 1.0
GaussPoints "Gauss" ElemType Tetrahedra
Number Of Gauss Points: 4
Natural Coordinates: Given
.585410 .138197 .138197
.138197 .138197 .585410
.138197 .585410 .138197
.138197 .138197 .138197
End Gausspoints
RESULT "Pressure Profile" "Completion Model" 1 Scalar OnGaussPoints
"Gauss"
Values
1 100.
100.
1.
100.
End Values