[GiDlist] Problem with selecting points

Moderator: GiD Team

Chen Guangjing

[GiDlist] Problem with selecting points

Post by Chen Guangjing »

Many thanks!
Compared with the point size in other user's GID, the point size in my GID is
much smaller, and I can't see it clearly, so I can't work on.
Something must be wrong with my GID setting.

Chen

Enrique Escolano wrote:

Until this future beta version, the point size cannot be changed.

Enrique
----- Original Message -----
From: "Chen Guangjing" chen.guangjing at upc.es
To: gidlist at gatxan.cimne.upc.es
Sent: Wednesday, February 12, 2003 7:39 PM
Subject: Re: [GiDlist] Problem with selecting points

Many thanks!
I know where to change the color of point, line, etc., but I don't know
where to
change point size.
If you could tell me it will be much appreciated!

Chen

Enrique Escolano wrote:

For the next beta version, we are working in a "custom render" mode.
The user can create more "user-defined" render modes, setting some
options:
point and line size, color by layer or by entity type, etc.

Enrique Escolano

----- Original Message -----
From: "Chen Guangjing" chen.guangjing at upc.es
To: gidlist at gatxan.cimne.upc.es
Sent: Wednesday, February 12, 2003 6:10 PM
Subject: Re: [GiDlist] Problem with selecting points

Many thanks, but this problem still exists for both GID6.3.0b and
GID7.2.
When I want to create a line, I just wish its two boundary points to
be
bigger.

Chen

Javier Mora wrote:

Other suggestion: check a newer version, GiD7.2 or the last beta
version
of
GiD6:
ftp://gid.cimne.upc.es/pub/gid_adds/Windows/Old/GiD6.3.0b-win.exe
(12.6
MB)

-----Mensaje original-----
De: gidlist-admin at gatxan.cimne.upc.es
[mailto:gidlist-admin at gatxan.cimne.upc.es]En nombre de Chen
Guangjing
Enviado el: miércoles, 12 de febrero de 2003 16:03
Para: gidlist at gatxan.cimne.upc.es
Asunto: Re: [GiDlist] Problem with selecting points


Hi, Javier

Many thanks for your reply!
But for me I hope the points selected to be marked by bigger
red point.
This problem happened recently, and there was no such problem with
my
previous GID.

Chen

Javier Mora wrote:

You can use two additional tools:

Utilities - Signal - Points (the point is signed using four
lines)
View - Label - All in - Points (you will see a label for
each selected
point)

-----Mensaje original-----
De: gidlist-admin at gatxan.cimne.upc.es
[mailto:gidlist-admin at gatxan.cimne.upc.es]En nombre de
Chen Guangjing
Enviado el: miércoles, 12 de febrero de 2003 15:21
Para: GiDlist at gatxan.cimne.upc.es
Asunto: [GiDlist] Problem with selecting points


Dear Sir/Madam

There is a problem with my GID 6.1.2:
when I select a point from a geometric figure or mesh, the
point becomes

red, but the red point is so small that it is difficult
to see the red
color clearly.
so could you please do me a favor to tell me how to improve
it?
I look forward to your reply!

Yours sincerely,
Chen Gaungjing
Edificio D2

_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist


_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist

_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist


_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist

_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist


_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist

_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist


_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist
Enrique Escolano

[GiDlist] Problem with selecting points

Post by Enrique Escolano »

If your poit size is too small, try if exists some setting of your
graphic card to correct it.

Note: Find this setting in Windows (not in GiD):
screen properties - configuration - advanced...

Try also to update your graphic card driver.

Enrique

----- Original Message -----
From: "Chen Guangjing" chen.guangjing at upc.es
To: gidlist at gatxan.cimne.upc.es
Sent: Thursday, February 13, 2003 10:20 AM
Subject: Re: [GiDlist] Problem with selecting points


Many thanks!
Compared with the point size in other user's GID, the point size in my GID
is
much smaller, and I can't see it clearly, so I can't work on.
Something must be wrong with my GID setting.

Chen

Enrique Escolano wrote:

Until this future beta version, the point size cannot be changed.

Enrique
----- Original Message -----
From: "Chen Guangjing" chen.guangjing at upc.es
To: gidlist at gatxan.cimne.upc.es
Sent: Wednesday, February 12, 2003 7:39 PM
Subject: Re: [GiDlist] Problem with selecting points

Many thanks!
I know where to change the color of point, line, etc., but I don't
know
where to
change point size.
If you could tell me it will be much appreciated!

Chen

Enrique Escolano wrote:

For the next beta version, we are working in a "custom render" mode.
The user can create more "user-defined" render modes, setting some
options:
point and line size, color by layer or by entity type, etc.

Enrique Escolano

----- Original Message -----
From: "Chen Guangjing" chen.guangjing at upc.es
To: gidlist at gatxan.cimne.upc.es
Sent: Wednesday, February 12, 2003 6:10 PM
Subject: Re: [GiDlist] Problem with selecting points

Many thanks, but this problem still exists for both GID6.3.0b and
GID7.2.
When I want to create a line, I just wish its two boundary points
to
be
bigger.

Chen

Javier Mora wrote:

Other suggestion: check a newer version, GiD7.2 or the last beta
version
of
GiD6:

ftp://gid.cimne.upc.es/pub/gid_adds/Windows/Old/GiD6.3.0b-win.exe
(12.6
MB)

-----Mensaje original-----
De: gidlist-admin at gatxan.cimne.upc.es
[mailto:gidlist-admin at gatxan.cimne.upc.es]En nombre de Chen
Guangjing
Enviado el: miércoles, 12 de febrero de 2003 16:03
Para: gidlist at gatxan.cimne.upc.es
Asunto: Re: [GiDlist] Problem with selecting points


Hi, Javier

Many thanks for your reply!
But for me I hope the points selected to be marked by bigger
red point.
This problem happened recently, and there was no such problem
with
my
previous GID.

Chen

Javier Mora wrote:

You can use two additional tools:

Utilities - Signal - Points (the point is signed using four
lines)
View - Label - All in - Points (you will see a label for
each selected
point)

-----Mensaje original-----
De: gidlist-admin at gatxan.cimne.upc.es
[mailto:gidlist-admin at gatxan.cimne.upc.es]En nombre de
Chen Guangjing
Enviado el: miércoles, 12 de febrero de 2003 15:21
Para: GiDlist at gatxan.cimne.upc.es
Asunto: [GiDlist] Problem with selecting points


Dear Sir/Madam

There is a problem with my GID 6.1.2:
when I select a point from a geometric figure or mesh, the
point becomes

red, but the red point is so small that it is difficult
to see the red
color clearly.
so could you please do me a favor to tell me how to
improve
it?
I look forward to your reply!

Yours sincerely,
Chen Gaungjing
Edificio D2

_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist


_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist

_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist


_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist

_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist


_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist

_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist


_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist

_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist

Chen Guangjing

[GiDlist] Problem with selecting points

Post by Chen Guangjing »

I have tried to change the configuration of the screen, but it didn't work
either.
Chen
Enrique Escolano wrote:

If your poit size is too small, try if exists some setting of your
graphic card to correct it.

Note: Find this setting in Windows (not in GiD):
screen properties - configuration - advanced...

Try also to update your graphic card driver.

Enrique

----- Original Message -----
From: "Chen Guangjing" chen.guangjing at upc.es
To: gidlist at gatxan.cimne.upc.es
Sent: Thursday, February 13, 2003 10:20 AM
Subject: Re: [GiDlist] Problem with selecting points

Many thanks!
Compared with the point size in other user's GID, the point size in my GID
is
much smaller, and I can't see it clearly, so I can't work on.
Something must be wrong with my GID setting.

Chen

Enrique Escolano wrote:

Until this future beta version, the point size cannot be changed.

Enrique
----- Original Message -----
From: "Chen Guangjing" chen.guangjing at upc.es
To: gidlist at gatxan.cimne.upc.es
Sent: Wednesday, February 12, 2003 7:39 PM
Subject: Re: [GiDlist] Problem with selecting points

Many thanks!
I know where to change the color of point, line, etc., but I don't
know
where to
change point size.
If you could tell me it will be much appreciated!

Chen

Enrique Escolano wrote:

For the next beta version, we are working in a "custom render" mode.
The user can create more "user-defined" render modes, setting some
options:
point and line size, color by layer or by entity type, etc.

Enrique Escolano

----- Original Message -----
From: "Chen Guangjing" chen.guangjing at upc.es
To: gidlist at gatxan.cimne.upc.es
Sent: Wednesday, February 12, 2003 6:10 PM
Subject: Re: [GiDlist] Problem with selecting points

Many thanks, but this problem still exists for both GID6.3.0b and
GID7.2.
When I want to create a line, I just wish its two boundary points
to
be
bigger.

Chen

Javier Mora wrote:

Other suggestion: check a newer version, GiD7.2 or the last beta
version
of
GiD6:

ftp://gid.cimne.upc.es/pub/gid_adds/Windows/Old/GiD6.3.0b-win.exe
(12.6
MB)

-----Mensaje original-----
De: gidlist-admin at gatxan.cimne.upc.es
[mailto:gidlist-admin at gatxan.cimne.upc.es]En nombre de Chen
Guangjing
Enviado el: miércoles, 12 de febrero de 2003 16:03
Para: gidlist at gatxan.cimne.upc.es
Asunto: Re: [GiDlist] Problem with selecting points


Hi, Javier

Many thanks for your reply!
But for me I hope the points selected to be marked by bigger
red point.
This problem happened recently, and there was no such problem
with
my
previous GID.

Chen

Javier Mora wrote:

You can use two additional tools:

Utilities - Signal - Points (the point is signed using four
lines)
View - Label - All in - Points (you will see a label for
each selected
point)

-----Mensaje original-----
De: gidlist-admin at gatxan.cimne.upc.es
[mailto:gidlist-admin at gatxan.cimne.upc.es]En nombre de
Chen Guangjing
Enviado el: miércoles, 12 de febrero de 2003 15:21
Para: GiDlist at gatxan.cimne.upc.es
Asunto: [GiDlist] Problem with selecting points


Dear Sir/Madam

There is a problem with my GID 6.1.2:
when I select a point from a geometric figure or mesh, the
point becomes

red, but the red point is so small that it is difficult
to see the red
color clearly.
so could you please do me a favor to tell me how to
improve
it?
I look forward to your reply!

Yours sincerely,
Chen Gaungjing
Edificio D2

_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist


_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist

_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist


_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist

_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist


_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist

_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist


_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist

_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist


_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist
Miguel A. de Riera Pasenau

[GiDlist] Problem with selecting points

Post by Miguel A. de Riera Pasenau »

Which Graphic card are you using?
Does the problem also appear when you change to 256 Colours?

In Windows, in the Display properties Configuration panel,
there is a button with label 'advance settings' or 'advanced options'.
Clicking on this button a window appears with some more settings.
there should be a panel with your graphics card name as label text,
for instance 'GeForce2 MX' or so . . .
inside this panel, there is a button called 'additional properties'
another window appers.
inside one of these panels probably under the one with 'openGl' as text,
ther should be a setting like 'detail level' or 'optimize for . . .'
with at least two options: for Speed and for Quality.
You should change it to 'for Quality', so all the lines and points properties
will be applied.

Have you tried a new version of the drivers for your graphics card?

miguel




Chen Guangjing wrote:

I have tried to change the configuration of the screen, but it didn't work
either.
Chen
Enrique Escolano wrote:

If your poit size is too small, try if exists some setting of your
graphic card to correct it.

Note: Find this setting in Windows (not in GiD):
screen properties - configuration - advanced...

Try also to update your graphic card driver.

Enrique

----- Original Message -----
From: "Chen Guangjing" chen.guangjing at upc.es
To: gidlist at gatxan.cimne.upc.es
Sent: Thursday, February 13, 2003 10:20 AM
Subject: Re: [GiDlist] Problem with selecting points

--
--------------------------------------------------------------------------------
Miguel A. de Riera Pasenau miguel at cimne.upc.es http://gid.cimne.upc.es
Chen Guangjing

[GiDlist] Problem with selecting points

Post by Chen Guangjing »

Many thanks for your good suggestion.
My problem has been solved by using a new version of the drivers for my graphics
card.
Chen

"Miguel A. de Riera Pasenau" wrote:

Which Graphic card are you using?
Does the problem also appear when you change to 256 Colours?

In Windows, in the Display properties Configuration panel,
there is a button with label 'advance settings' or 'advanced options'.
Clicking on this button a window appears with some more settings.
there should be a panel with your graphics card name as label text,
for instance 'GeForce2 MX' or so . . .
inside this panel, there is a button called 'additional properties'
another window appers.
inside one of these panels probably under the one with 'openGl' as text,
ther should be a setting like 'detail level' or 'optimize for . . .'
with at least two options: for Speed and for Quality.
You should change it to 'for Quality', so all the lines and points properties
will be applied.

Have you tried a new version of the drivers for your graphics card?

miguel

Chen Guangjing wrote:

I have tried to change the configuration of the screen, but it didn't work
either.
Chen
Enrique Escolano wrote:

If your poit size is too small, try if exists some setting of your
graphic card to correct it.

Note: Find this setting in Windows (not in GiD):
screen properties - configuration - advanced...

Try also to update your graphic card driver.

Enrique

----- Original Message -----
From: "Chen Guangjing" chen.guangjing at upc.es
To: gidlist at gatxan.cimne.upc.es
Sent: Thursday, February 13, 2003 10:20 AM
Subject: Re: [GiDlist] Problem with selecting points

--
--------------------------------------------------------------------------------
Miguel A. de Riera Pasenau miguel at cimne.upc.es http://gid.cimne.upc.es
_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist
Post Reply