Hello
I am using GID 7.2 on Win XP and NVIDIA GeForce 3 Ti200 graphic card. I
rather often (several time per day) get problems when using GID as
postprocessor. Suddenly I can not reach the top menus. They just don’t
show up when I pick them, but the buttons in the window are still
working. The only way I have figured out to solve the problem is to
leave post process mode and then go back again. After that the program
works well until next crash. It seems not to be any coupling between
this problem and some special commands I give. The same problem was in
GID 7.1. Is this a known problem? Is there some thing to do about it?
Thank you
/BF
Billy Fälth
Clay Technology AB
Ideon Research Center
S 223 70 Lund, SWEDEN
Tel +46 46 286 25 81
Fax +46 46 13 42 30
www.claytech.se http://www.claytech.se/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20030110/586ef510/attachment.htm
[GiDlist] GID crash
Moderator: GiD Team
-
Miguel A. de Riera Pasenau
[GiDlist] GID crash
Does this happens with different models?
can you send as, or directly to me, an exmaple and its commands sequence
so we can reproduce the problem?
can you send us also your gid.ini, usually located under 'Document and Settings'...
or 'Windows'?
Which driver version are you using (Screen or Monitor properties, configuration
panel, 'advanced settings' button, 'GeForce3 Ti200' panel, version information listbox)?
are you using the latest whql certified drivers, v. x.x.x.4072?
miguel
|
| Hello
|
| I am using GID 7.2 on Win XP and NVIDIA GeForce 3 Ti200 graphic card. I rather often (several
| time per day) get problems when using GID as postprocessor. Suddenly I can not reach the top
| menus. They just don't show up when I pick them, but the buttons in the window are still
| working. The only way I have figured out to solve the problem is to leave post process mode and
| then go back again. After that the program works well until next crash. It seems not to be any
| coupling between this problem and some special commands I give. The same problem was in GID
| 7.1. Is this a known problem? Is there some thing to do about it?
|
|
|
| Thank you
|
| /BF
|
|
|
| Billy Fälth
|
| Clay Technology AB
|
| Ideon Research Center
|
| S 223 70 Lund, SWEDEN
|
| Tel +46 46 286 25 81
|
| Fax +46 46 13 42 30
|
| www.claytech.se
|
|
|
|
--
--------------------------------------------------------------------------------
Miguel A. de Riera Pasenau miguel at cimne.upc.es http://gid.cimne.upc.es
can you send as, or directly to me, an exmaple and its commands sequence
so we can reproduce the problem?
can you send us also your gid.ini, usually located under 'Document and Settings'...
or 'Windows'?
Which driver version are you using (Screen or Monitor properties, configuration
panel, 'advanced settings' button, 'GeForce3 Ti200' panel, version information listbox)?
are you using the latest whql certified drivers, v. x.x.x.4072?
miguel
|
| Hello
|
| I am using GID 7.2 on Win XP and NVIDIA GeForce 3 Ti200 graphic card. I rather often (several
| time per day) get problems when using GID as postprocessor. Suddenly I can not reach the top
| menus. They just don't show up when I pick them, but the buttons in the window are still
| working. The only way I have figured out to solve the problem is to leave post process mode and
| then go back again. After that the program works well until next crash. It seems not to be any
| coupling between this problem and some special commands I give. The same problem was in GID
| 7.1. Is this a known problem? Is there some thing to do about it?
|
|
|
| Thank you
|
| /BF
|
|
|
| Billy Fälth
|
| Clay Technology AB
|
| Ideon Research Center
|
| S 223 70 Lund, SWEDEN
|
| Tel +46 46 286 25 81
|
| Fax +46 46 13 42 30
|
| www.claytech.se
|
|
|
|
--
--------------------------------------------------------------------------------
Miguel A. de Riera Pasenau miguel at cimne.upc.es http://gid.cimne.upc.es