Hi Guys,
I am looking at creating a composite structure in GID and I am not sure how to mesh it with a structured 20 node brick mesh since I cant seem to get the structure correctly modeled.
What I am trying to do is a cylindrical fiber inside a cube. So that the cylinder can have one material property and the cube that surrounds it will have nother type of material property.
Any ideas on how I could do this?
Thanks
Marcias
Email: martinez at aei.ca
FWD: 260032
SIP 1-747-6694145
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20040904/e9df2122/attachment.htm
[GiDlist] Support on Drawing in GID
Moderator: GiD Team
[GiDlist] Support on Drawing in GID
Can create all top surfaces with 4-sides, and create the 6-sided volumes by extrusion.
See this picture:
Enrique Escolano
----- Original Message -----
From: Marcias Martinez
To: Enrique Escolano
Cc: gidlist at gatxan.cimne.upc.es
Sent: Saturday, September 04, 2004 6:33 PM
Subject: [GiDlist] Support on Drawing in GID
Hi Guys,
I am looking at creating a composite structure in GID and I am not sure how to mesh it with a structured 20 node brick mesh since I cant seem to get the structure correctly modeled.
What I am trying to do is a cylindrical fiber inside a cube. So that the cylinder can have one material property and the cube that surrounds it will have nother type of material property.
Any ideas on how I could do this?
Thanks
Marcias
Email: martinez at aei.ca
FWD: 260032
SIP 1-747-6694145
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20040906/c236f0e9/attachment.htm
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/gif
Size: 6481 bytes
Desc: not available
Url : http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20040906/c236f0e9/attachment.gif
See this picture:
Enrique Escolano
----- Original Message -----
From: Marcias Martinez
To: Enrique Escolano
Cc: gidlist at gatxan.cimne.upc.es
Sent: Saturday, September 04, 2004 6:33 PM
Subject: [GiDlist] Support on Drawing in GID
Hi Guys,
I am looking at creating a composite structure in GID and I am not sure how to mesh it with a structured 20 node brick mesh since I cant seem to get the structure correctly modeled.
What I am trying to do is a cylindrical fiber inside a cube. So that the cylinder can have one material property and the cube that surrounds it will have nother type of material property.
Any ideas on how I could do this?
Thanks
Marcias
Email: martinez at aei.ca
FWD: 260032
SIP 1-747-6694145
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20040906/c236f0e9/attachment.htm
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/gif
Size: 6481 bytes
Desc: not available
Url : http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20040906/c236f0e9/attachment.gif