Hi Enrique,
Attached you will find the following files:
mesh.res
mesh.msh
and calc.txt (this is just for your information).
If you open the post-processing section and do a right click and then label
all, you will see that the numbering presented by the element in 7.49 is not
correct. If you do it in 7.2 you do get the correct numberying.
Let me know if you can duplicate the problem.
Take care,
Marcias Martinez
FWD 260032
Sip Phone: 1-747-669-4145
----- Original Message -----
From: gidlist-request at gatxan.cimne.upc.es
To: gidlist at gatxan.cimne.upc.es
Sent: Friday, July 16, 2004 6:01 AM
Subject: GiDlist digest, Vol 1 #666 - 4 msgs
Send GiDlist mailing list submissions to
gidlist at gid.cimne.upc.es
To subscribe or unsubscribe via the World Wide Web, visit
http://gid.cimne.upc.es/mailman/listinfo/gidlist
or, via email, send a message with subject or body 'help' to
gidlist-request at gid.cimne.upc.es
You can reach the person managing the list at
gidlist-admin at gid.cimne.upc.es
When replying, please edit your Subject line so it is more specific
than "Re: Contents of GiDlist digest..."
______________________________________________________________________
Los envios para la lista de correo GiDlist han de enviarse a
gidlist at gid.cimne.upc.es
Para subscribirse o desapuntarse via World Wide Web, visite
http://gid.cimne.upc.es/mailman/listinfo/gidlist
o, via email, enviando un mensaje con 'help' en el 'asunto' o 'cuerpo'
a
gidlist-request at gid.cimne.upc.es
Puede contactar con la persona que administra la lista bajo
gidlist-admin at gid.cimne.upc.es
Cuando responda, por favor, edite la linea del 'asunto' para que sea
más especifica que "Re: Contenido resumen de GiDlist ..."
Today's Topics:
1. floating point precision (Rama Karve)
2. RE: floating point precision (=?iso-8859-1?Q?Ramon_Rib=F3?=)
3. Re: Label Numberying in the GID 7.49 (Enrique Escolano)
4. Re: Cast3M (Enrique Escolano)
--__--__--
Message: 1
Date: Thu, 15 Jul 2004 06:34:22 -0700 (PDT)
From: Rama Karve ka_rama at yahoo.com
To: gidlist at gatxan.cimne.upc.es
Subject: [GiDlist] floating point precision
Reply-To: gidlist at gid.cimne.upc.es
--0-751808302-1089898462=:36223
Content-Type: text/plain; charset=us-ascii
Hi,
I am using Files - Export - Text Data Report to get
the geometry information.
How do I change/increase the floating point precision
for the coordinates and other numerical data that are
written to the file?
Thanks,
Rama Karve
---------------------------------
Do you Yahoo!?
Take Yahoo! Mail with you! Get it on your mobile phone.
--0-751808302-1089898462=:36223
Content-Type: text/html; charset=us-ascii
DIVHi,BRBRI am using Files -> Export -> Text Data Report to
getBRthe geometry information. BRBRHow do I change/increase the
floating point precisionBRfor the coordinates and other numerical data
that areBRwritten to the file?BRBRThanks,BRRama Karve/DIVp
hr size=1Do you Yahoo!?br
a
href="http://us.rd.yahoo.com/mail_us/taglines/mobile/*http://mobile.yahoo.co
m/maildemo"Take Yahoo! Mail with you!/a Get it on your mobile phone.
--0-751808302-1089898462=:36223--
--__--__--
Message: 2
From: =?iso-8859-1?Q?Ramon_Rib=F3?= ramsan at compassis.com
To: gidlist at gatxan.cimne.upc.es
Subject: RE: [GiDlist] floating point precision
Date: Thu, 15 Jul 2004 21:56:41 +0200
Reply-To: gidlist at gid.cimne.upc.es
This is a multi-part message in MIME format.
------=_NextPart_000_0001_01C46AB6.9C826580
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
Hello,
You will have to use a .bas file to obtain arbitrary precission.
Check:
Help-customization help
for details.
Regards,
--
Compass Ing. y Sistemas Dr. Ramon Ribo
http://www.compassis.com http://www.compassis.com/
ramsan at compassis.com
c/ Manuel Girona, 61 bajos tel. +34 93 204 10 82
08034 Barcelona, Spain fax. +34 93 204 19 09
-----Mensaje original-----
De: gidlist-admin at gatxan.cimne.upc.es
[mailto:gidlist-admin at gatxan.cimne.upc.es] En nombre de Rama Karve
Enviado el: jueves, 15 de julio de 2004 15:34
Para: gidlist at gatxan.cimne.upc.es
Asunto: [GiDlist] floating point precision
Hi,
I am using Files - Export - Text Data Report to get
the geometry information.
How do I change/increase the floating point precision
for the coordinates and other numerical data that are
written to the file?
Thanks,
Rama Karve
_____
Do you Yahoo!?
Take
http://us.rd.yahoo.com/mail_us/taglines/mobile/*http://mobile.yahoo.com
/maildemo Yahoo! Mail with you! Get it on your mobile phone.
------=_NextPart_000_0001_01C46AB6.9C826580
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"
HTMLHEAD
META HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; =
charset=3Diso-8859-1"
TITLEMensaje/TITLE
META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR/HEAD
BODY
DIVFONT face=3DArial size=3D2/FONT /DIV
DIVSPAN class=3D171392019-15072004FONT face=3DArial =
size=3D2 =20
Hello,/FONT/SPAN/DIV
DIVSPAN class=3D171392019-15072004FONT face=3DArial=20
size=3D2/FONT/SPAN /DIV
DIVSPAN class=3D171392019-15072004FONT face=3DArial =
size=3D2 =20
You will have to use a .bas file to obtain arbitrary precission.=20
Check:/FONT/SPAN/DIV
DIVSPAN class=3D171392019-15072004FONT face=3DArial=20
size=3D2/FONT/SPAN /DIV
DIVSPAN class=3D171392019-15072004FONT face=3DArial =
size=3D2 =20
Help->customization help/FONT/SPAN/DIV
DIVSPAN class=3D171392019-15072004FONT face=3DArial=20
size=3D2/FONT/SPAN /DIV
DIVSPAN class=3D171392019-15072004FONT face=3DArial =
size=3D2 =20
for details./FONT/SPAN/DIV
DIVFONT face=3DArial size=3D2/FONT /DIV
DIVSPAN class=3D171392019-15072004FONT face=3DArial =
size=3D2 =20
Regards,/FONT/SPAN/DIV!-- Converted from text/plain format --
PFONT size=3D2--BRCompass Ing. y =
Sistemas Dr.=20
Ramon RiboBRA=20
href=3D"http://www.compassis.com/"a href="http://www.compassis.com/A"http://www.c ... nbsp;&nbs=
p; =20
ramsan at compassis.comBRc/ Manuel Girona, 61 bajos tel. +34 =
93 204=20
10 82BR08034 Barcelona, Spain fax. =
+34 93=20
204 19 09 /FONT/P
BLOCKQUOTE style=3D"MARGIN-RIGHT: 0px"
DIV/DIV
DIV class=3DOutlookMessageHeader lang=3Des dir=3Dltr =
align=3DleftFONT face=3DTahoma=20
size=3D2-----Mensaje original-----BRBDe:/B=20
gidlist-admin at gatxan.cimne.upc.es =
[mailto:gidlist-admin at gatxan.cimne.upc.es]=20
BEn nombre de /BRama KarveBRBEnviado el:/B jueves, 15 de =
julio de=20
2004 15:34BRBPara:/B =
gidlist at gatxan.cimne.upc.esBRBAsunto:/B=20
[GiDlist] floating point precisionBRBR/FONT/DIV
DIVHi,BRBRI am using Files -> Export -> Text Data Report =
to=20
getBRthe geometry information. BRBRHow do I change/increase the =
floating=20
point precisionBRfor the coordinates and other numerical data that=20
areBRwritten to the file?BRBRThanks,BRRama Karve/DIV
P
HR SIZE=3D1
Do you Yahoo!?BRA=20
=
href=3D"http://us.rd.yahoo.com/mail_us/taglines/mobile/*http://mobile.yah=
oo.com/maildemo"Take=20
Yahoo! Mail with you!/A Get it on your mobile=20
phone./BLOCKQUOTE/BODY/HTML
------=_NextPart_000_0001_01C46AB6.9C826580--
--__--__--
Message: 3
From: "Enrique Escolano" escolano at cimne.upc.es
To: gidlist at gatxan.cimne.upc.es
Subject: Re: [GiDlist] Label Numberying in the GID 7.49
Date: Thu, 15 Jul 2004 23:28:30 +0200
Reply-To: gidlist at gid.cimne.upc.es
This is a multi-part message in MIME format.
------=_NextPart_000_04DB_01C46AC3.7007C1A0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
You used the same mesh and results file for both pictures??
What's the process to create this two images?=20
Have you used exactly the same procedure with GiD7.2 and GiD7.4.9b?
Enrique
----- Original Message -----=20
From: Marcias Martinez=20
To: Enrique Escolano=20
Cc: gidlist at gatxan.cimne.upc.es=20
Sent: Thursday, July 15, 2004 3:07 AM
Subject: [GiDlist] Label Numberying in the GID 7.49
Hi Enrique,
I think the label numberying in GID beta 7.49 is not working =
correctly. Here is two JPG files, one done in 7.2 and another in 7.49 =
(the same result file). The label attached to each node is totaly =
different. The 7.2 label numberying makes sense the 7.49 does not.=20
Marcias
------=_NextPart_000_04DB_01C46AC3.7007C1A0
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"
HTMLHEAD
META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1"
META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR
STYLE/STYLE
/HEAD
BODY bgColor=3D#ffffff
DIVFONT face=3DArial size=3D2You used the same mesh and results =
file for both pictures??/FONT/DIV
DIVFONT face=3DArial size=3D2What's the process to create this two =
images?=20
/FONT/DIV
DIVFONT face=3DArial size=3D2Have you used exactly the same =
procedure with=20
GiD7.2 and GiD7.4.9b?/FONT/DIV
DIVFONT face=3DArial size=3D2/FONT /DIV
DIVFONT face=3DArial size=3D2Enrique/FONT/DIV
BLOCKQUOTE dir=3Dltr=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px"
DIV style=3D"FONT: 10pt arial"----- Original Message ----- /DIV
DIV=20
style=3D"BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: =
black"BFrom:/B=20
A title=3Dmartinez at aei.ca href=3D"mailto:martinez at aei.ca"Marcias =
Martinez/A=20
/DIV
DIV style=3D"FONT: 10pt arial"BTo:/B A =
title=3Descolano at cimne.upc.es=20
href=3D"mailto:escolano at cimne.upc.es"Enrique Escolano/A /DIV
DIV style=3D"FONT: 10pt arial"BCc:/B A =
title=3Dgidlist at gatxan.cimne.upc.es=20
=
href=3D"mailto:gidlist at gatxan.cimne.upc.es"gidlist at gatxan.cimne.upc.es/=
A=20
/DIV
DIV style=3D"FONT: 10pt arial"BSent:/B Thursday, July 15, 2004 =
3:07=20
AM/DIV
DIV style=3D"FONT: 10pt arial"BSubject:/B [GiDlist] Label =
Numberying in=20
the GID 7.49/DIV
DIVBR/DIV
DIVFONT face=3DArial size=3D2Hi Enrique,/FONT/DIV
DIVFONT face=3DArial size=3D2/FONT /DIV
DIVFONT face=3DArial size=3D2I think the label numberying in GID =
beta 7.49 is=20
not working correctly. Here is two JPG files, one done in =
7.2 and=20
another in 7.49 (the same result file). The label attached to each =
node is=20
totaly different. The 7.2 label numberying makes sense the 7.49 does =
not.=20
BR/FONT/DIV
DIVFONT face=3DArial size=3D2/FONT /DIV
DIVFONT face=3DArial =
size=3D2Marcias/FONT/DIV/BLOCKQUOTE/BODY/HTML
------=_NextPart_000_04DB_01C46AC3.7007C1A0--
--__--__--
Message: 4
From: "Enrique Escolano" escolano at cimne.upc.es
To: gidlist at gatxan.cimne.upc.es
Subject: Re: [GiDlist] Cast3M
Date: Fri, 16 Jul 2004 11:50:30 +0200
Reply-To: gidlist at gid.cimne.upc.es
This is a multi-part message in MIME format.
------=_NextPart_000_0533_01C46B2B.1819B440
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
GiD cannot directly read Cast3M results.
You must transform this results in a GiD postprocess file.
This format is documented in the GiD help: see "Postprocess data files"
GiD can also read FEMAP neutral results files, and Tecplot results =
files. I unknow if Cast3M can export this kind on files.
Regards
Enrique Escolano
----- Original Message -----=20
From: Nacho=20
To: gidlist at gatxan.cimne.upc.es=20
Sent: Wednesday, July 14, 2004 7:12 PM
Subject: [GiDlist] Cast3M
Hola!!
=BFEs posible realizar un postproceso con Gid de un problema =
din=E1mico resuelto con Cast3M? =BFC=F3mo puedo hacerlo ? Gracias.
Ignacio
ETSECCPB
------=_NextPart_000_0533_01C46B2B.1819B440
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"
HTMLHEAD
META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1"
META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR
STYLE/STYLE
/HEAD
BODY bgColor=3D#ffffff
DIVFONT face=3DArial size=3D2GiD cannot directly read Cast3M=20
results./FONT/DIV
DIVFONT face=3DArial size=3D2You must transform this results in a =
GiD=20
postprocess file./FONT/DIV
DIVFONT face=3DArial size=3D2This format is documented in the =
GiD=20
help: see "Postprocess data files"/FONT/DIV
DIVFONT face=3DArial size=3D2/FONT /DIV
DIVFONT face=3DArial size=3D2GiD can also read FEMAP neutral results =
files, and=20
Tecplot results files. I unknow if Cast3M can export this kind on=20
files./FONT/DIV
DIVFONT face=3DArial size=3D2/FONT /DIV
DIVFONT face=3DArial size=3D2Regards/FONT/DIV
DIVFONT face=3DArial size=3D2/FONT /DIV
DIVFONT face=3DArial size=3D2Enrique Escolano/FONT/DIV
BLOCKQUOTE dir=3Dltr=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px"
DIV style=3D"FONT: 10pt arial"----- Original Message ----- /DIV
DIV=20
style=3D"BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: =
black"BFrom:/B=20
A title=3Dnachohp at terra.es href=3D"mailto:nachohp at terra.es"Nacho/A =
/DIV
DIV style=3D"FONT: 10pt arial"BTo:/B A =
title=3Dgidlist at gatxan.cimne.upc.es=20
=
href=3D"mailto:gidlist at gatxan.cimne.upc.es"gidlist at gatxan.cimne.upc.es/=
A=20
/DIV
DIV style=3D"FONT: 10pt arial"BSent:/B Wednesday, July 14, 2004 =
7:12=20
PM/DIV
DIV style=3D"FONT: 10pt arial"BSubject:/B [GiDlist] Cast3M/DIV
DIVBR/DIV
DIVFONT face=3DArial size=3D2Hola!!/FONT/DIV
DIVFONT face=3DArial size=3D2=BFEs posible realizar un postproceso =
con Gid de un=20
problema din=E1mico resuelto con Cast3M? =BFC=F3mo puedo hacerlo ?=20
Gracias./FONT/DIV
DIVFONT face=3DArial size=3D2/FONT /DIV
DIVFONT face=3DArial size=3D2Ignacio/FONT/DIV
DIVFONT face=3DArial =
size=3D2ETSECCPB/FONT/DIV/BLOCKQUOTE/BODY/HTML
------=_NextPart_000_0533_01C46B2B.1819B440--
--__--__--
_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist
End of GiDlist Digest
-------------- next part --------------
A non-text attachment was scrubbed...
Name: mesh.msh
Type: application/octet-stream
Size: 385 bytes
Desc: not available
Url : http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20040718/d7beaae5/attachment.obj
-------------- next part --------------
A non-text attachment was scrubbed...
Name: mesh.res
Type: application/octet-stream
Size: 3451 bytes
Desc: not available
Url : http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20040718/d7beaae5/attachment-0001.obj
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: calc.txt
Url: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20040718/d7beaae5/attachment.txt
[GiDlist] Re: GiDlist digest, Vol 1 #666 - 4 msgs
Moderator: GiD Team
-
Enrique Escolano
[GiDlist] Re: GiDlist digest, Vol 1 #666 - 4 msgs
I obtain the same labels using GiD7.2 and GiD7.4.9b.
Your bad image (of your previous e-mail) show two overlapped labels: the
correct node number, and another number.
I unknow what's the cause. Maybe it's a problem related with the graphic
card.
Try to deactivate from Windows the graphic card acceleration.
Enrique Escolano
----- Original Message -----
From: "Marcias Martinez" martinez at aei.ca
To: gidlist at gatxan.cimne.upc.es
Cc: "Enrique Escolano" escolano at cimne.upc.es
Sent: Sunday, July 18, 2004 12:16 AM
Subject: [GiDlist] Re: GiDlist digest, Vol 1 #666 - 4 msgs
Hi Enrique,
Attached you will find the following files:
mesh.res
mesh.msh
and calc.txt (this is just for your information).
If you open the post-processing section and do a right click and then
label
all, you will see that the numbering presented by the element in 7.49 is
not
correct. If you do it in 7.2 you do get the correct numberying.
Let me know if you can duplicate the problem.
Take care,
Marcias Martinez
FWD 260032
Sip Phone: 1-747-669-4145
----- Original Message -----
From: gidlist-request at gatxan.cimne.upc.es
To: gidlist at gatxan.cimne.upc.es
Sent: Friday, July 16, 2004 6:01 AM
Subject: GiDlist digest, Vol 1 #666 - 4 msgs
Send GiDlist mailing list submissions to
gidlist at gid.cimne.upc.es
To subscribe or unsubscribe via the World Wide Web, visit
http://gid.cimne.upc.es/mailman/listinfo/gidlist
or, via email, send a message with subject or body 'help' to
gidlist-request at gid.cimne.upc.es
You can reach the person managing the list at
gidlist-admin at gid.cimne.upc.es
When replying, please edit your Subject line so it is more specific
than "Re: Contents of GiDlist digest..."
______________________________________________________________________
Los envios para la lista de correo GiDlist han de enviarse a
gidlist at gid.cimne.upc.es
Para subscribirse o desapuntarse via World Wide Web, visite
http://gid.cimne.upc.es/mailman/listinfo/gidlist
o, via email, enviando un mensaje con 'help' en el 'asunto' o 'cuerpo'
a
gidlist-request at gid.cimne.upc.es
Puede contactar con la persona que administra la lista bajo
gidlist-admin at gid.cimne.upc.es
Cuando responda, por favor, edite la linea del 'asunto' para que sea
más especifica que "Re: Contenido resumen de GiDlist ..."
Today's Topics:
1. floating point precision (Rama Karve)
2. RE: floating point precision (=?iso-8859-1?Q?Ramon_Rib=F3?=)
3. Re: Label Numberying in the GID 7.49 (Enrique Escolano)
4. Re: Cast3M (Enrique Escolano)
--__--__--
Message: 1
Date: Thu, 15 Jul 2004 06:34:22 -0700 (PDT)
From: Rama Karve ka_rama at yahoo.com
To: gidlist at gatxan.cimne.upc.es
Subject: [GiDlist] floating point precision
Reply-To: gidlist at gid.cimne.upc.es
--0-751808302-1089898462=:36223
Content-Type: text/plain; charset=us-ascii
Hi,
I am using Files - Export - Text Data Report to get
the geometry information.
How do I change/increase the floating point precision
for the coordinates and other numerical data that are
written to the file?
Thanks,
Rama Karve
---------------------------------
Do you Yahoo!?
Take Yahoo! Mail with you! Get it on your mobile phone.
--0-751808302-1089898462=:36223
Content-Type: text/html; charset=us-ascii
DIVHi,BRBRI am using Files -> Export -> Text Data Report to
getBRthe geometry information. BRBRHow do I change/increase the
floating point precisionBRfor the coordinates and other numerical data
that areBRwritten to the file?BRBRThanks,BRRama Karve/DIVp
hr size=1Do you Yahoo!?br
a
href="http://us.rd.yahoo.com/mail_us/taglines/mobile/*http://mobile.yahoo.co
m/maildemo"Take Yahoo! Mail with you!/a Get it on your mobile phone.
--0-751808302-1089898462=:36223--
--__--__--
Message: 2
From: =?iso-8859-1?Q?Ramon_Rib=F3?= ramsan at compassis.com
To: gidlist at gatxan.cimne.upc.es
Subject: RE: [GiDlist] floating point precision
Date: Thu, 15 Jul 2004 21:56:41 +0200
Reply-To: gidlist at gid.cimne.upc.es
This is a multi-part message in MIME format.
------=_NextPart_000_0001_01C46AB6.9C826580
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
Hello,
You will have to use a .bas file to obtain arbitrary precission.
Check:
Help-customization help
for details.
Regards,
--
Compass Ing. y Sistemas Dr. Ramon Ribo
http://www.compassis.com http://www.compassis.com/
ramsan at compassis.com
c/ Manuel Girona, 61 bajos tel. +34 93 204 10 82
08034 Barcelona, Spain fax. +34 93 204 19 09
-----Mensaje original-----
De: gidlist-admin at gatxan.cimne.upc.es
[mailto:gidlist-admin at gatxan.cimne.upc.es] En nombre de Rama Karve
Enviado el: jueves, 15 de julio de 2004 15:34
Para: gidlist at gatxan.cimne.upc.es
Asunto: [GiDlist] floating point precision
Hi,
I am using Files - Export - Text Data Report to get
the geometry information.
How do I change/increase the floating point precision
for the coordinates and other numerical data that are
written to the file?
Thanks,
Rama Karve
_____
Do you Yahoo!?
Take
http://us.rd.yahoo.com/mail_us/taglines/mobile/*http://mobile.yahoo.com
/maildemo Yahoo! Mail with you! Get it on your mobile phone.
------=_NextPart_000_0001_01C46AB6.9C826580
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"
HTMLHEAD
META HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; =
charset=3Diso-8859-1"
TITLEMensaje/TITLE
META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR/HEAD
BODY
DIVFONT face=3DArial size=3D2/FONT /DIV
DIVSPAN class=3D171392019-15072004FONT face=3DArial =
size=3D2 =20
Hello,/FONT/SPAN/DIV
DIVSPAN class=3D171392019-15072004FONT face=3DArial=20
size=3D2/FONT/SPAN /DIV
DIVSPAN class=3D171392019-15072004FONT face=3DArial =
size=3D2 =20
You will have to use a .bas file to obtain arbitrary precission.=20
Check:/FONT/SPAN/DIV
DIVSPAN class=3D171392019-15072004FONT face=3DArial=20
size=3D2/FONT/SPAN /DIV
DIVSPAN class=3D171392019-15072004FONT face=3DArial =
size=3D2 =20
Help->customization help/FONT/SPAN/DIV
DIVSPAN class=3D171392019-15072004FONT face=3DArial=20
size=3D2/FONT/SPAN /DIV
DIVSPAN class=3D171392019-15072004FONT face=3DArial =
size=3D2 =20
for details./FONT/SPAN/DIV
DIVFONT face=3DArial size=3D2/FONT /DIV
DIVSPAN class=3D171392019-15072004FONT face=3DArial =
size=3D2 =20
Regards,/FONT/SPAN/DIV!-- Converted from text/plain format --
PFONT size=3D2--BRCompass Ing. y =
Sistemas Dr.=20
Ramon RiboBRA=20
href=3D"http://www.compassis.com/"a href="http://www.compassis.com/A"http://www.c ... nbsp;&nbs=
p; =20
ramsan at compassis.comBRc/ Manuel Girona, 61 bajos tel. +34
=
93 204=20
10 82BR08034 Barcelona, Spain fax.
=
+34 93=20
204 19 09 /FONT/P
BLOCKQUOTE style=3D"MARGIN-RIGHT: 0px"
DIV/DIV
DIV class=3DOutlookMessageHeader lang=3Des dir=3Dltr =
align=3DleftFONT face=3DTahoma=20
size=3D2-----Mensaje original-----BRBDe:/B=20
gidlist-admin at gatxan.cimne.upc.es =
[mailto:gidlist-admin at gatxan.cimne.upc.es]=20
BEn nombre de /BRama KarveBRBEnviado el:/B jueves, 15 de =
julio de=20
2004 15:34BRBPara:/B =
gidlist at gatxan.cimne.upc.esBRBAsunto:/B=20
[GiDlist] floating point precisionBRBR/FONT/DIV
DIVHi,BRBRI am using Files -> Export -> Text Data Report =
to=20
getBRthe geometry information. BRBRHow do I change/increase the
=
floating=20
point precisionBRfor the coordinates and other numerical data
that=20
areBRwritten to the file?BRBRThanks,BRRama Karve/DIV
P
HR SIZE=3D1
Do you Yahoo!?BRA=20
=
href=3D"http://us.rd.yahoo.com/mail_us/taglines/mobile/*http://mobile.yah=
oo.com/maildemo"Take=20
Yahoo! Mail with you!/A Get it on your mobile=20
phone./BLOCKQUOTE/BODY/HTML
------=_NextPart_000_0001_01C46AB6.9C826580--
--__--__--
Message: 3
From: "Enrique Escolano" escolano at cimne.upc.es
To: gidlist at gatxan.cimne.upc.es
Subject: Re: [GiDlist] Label Numberying in the GID 7.49
Date: Thu, 15 Jul 2004 23:28:30 +0200
Reply-To: gidlist at gid.cimne.upc.es
This is a multi-part message in MIME format.
------=_NextPart_000_04DB_01C46AC3.7007C1A0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
You used the same mesh and results file for both pictures??
What's the process to create this two images?=20
Have you used exactly the same procedure with GiD7.2 and GiD7.4.9b?
Enrique
----- Original Message -----=20
From: Marcias Martinez=20
To: Enrique Escolano=20
Cc: gidlist at gatxan.cimne.upc.es=20
Sent: Thursday, July 15, 2004 3:07 AM
Subject: [GiDlist] Label Numberying in the GID 7.49
Hi Enrique,
I think the label numberying in GID beta 7.49 is not working =
correctly. Here is two JPG files, one done in 7.2 and another in 7.49 =
(the same result file). The label attached to each node is totaly =
different. The 7.2 label numberying makes sense the 7.49 does not.=20
Marcias
------=_NextPart_000_04DB_01C46AC3.7007C1A0
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"
HTMLHEAD
META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1"
META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR
STYLE/STYLE
/HEAD
BODY bgColor=3D#ffffff
DIVFONT face=3DArial size=3D2You used the same mesh and results
=
file for both pictures??/FONT/DIV
DIVFONT face=3DArial size=3D2What's the process to create this two =
images?=20
/FONT/DIV
DIVFONT face=3DArial size=3D2Have you used exactly the same =
procedure with=20
GiD7.2 and GiD7.4.9b?/FONT/DIV
DIVFONT face=3DArial size=3D2/FONT /DIV
DIVFONT face=3DArial size=3D2Enrique/FONT/DIV
BLOCKQUOTE dir=3Dltr=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px"
DIV style=3D"FONT: 10pt arial"----- Original Message ----- /DIV
DIV=20
style=3D"BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: =
black"BFrom:/B=20
A title=3Dmartinez at aei.ca href=3D"mailto:martinez at aei.ca"Marcias =
Martinez/A=20
/DIV
DIV style=3D"FONT: 10pt arial"BTo:/B A =
title=3Descolano at cimne.upc.es=20
href=3D"mailto:escolano at cimne.upc.es"Enrique Escolano/A /DIV
DIV style=3D"FONT: 10pt arial"BCc:/B A =
title=3Dgidlist at gatxan.cimne.upc.es=20
=
href=3D"mailto:gidlist at gatxan.cimne.upc.es"gidlist at gatxan.cimne.upc.es/=
A=20
/DIV
DIV style=3D"FONT: 10pt arial"BSent:/B Thursday, July 15, 2004 =
3:07=20
AM/DIV
DIV style=3D"FONT: 10pt arial"BSubject:/B [GiDlist] Label =
Numberying in=20
the GID 7.49/DIV
DIVBR/DIV
DIVFONT face=3DArial size=3D2Hi Enrique,/FONT/DIV
DIVFONT face=3DArial size=3D2/FONT /DIV
DIVFONT face=3DArial size=3D2I think the label numberying in GID =
beta 7.49 is=20
not working correctly. Here is two JPG files, one done in =
7.2 and=20
another in 7.49 (the same result file). The label attached to each =
node is=20
totaly different. The 7.2 label numberying makes sense the 7.49 does =
not.=20
BR/FONT/DIV
DIVFONT face=3DArial size=3D2/FONT /DIV
DIVFONT face=3DArial =
size=3D2Marcias/FONT/DIV/BLOCKQUOTE/BODY/HTML
------=_NextPart_000_04DB_01C46AC3.7007C1A0--
--__--__--
Message: 4
From: "Enrique Escolano" escolano at cimne.upc.es
To: gidlist at gatxan.cimne.upc.es
Subject: Re: [GiDlist] Cast3M
Date: Fri, 16 Jul 2004 11:50:30 +0200
Reply-To: gidlist at gid.cimne.upc.es
This is a multi-part message in MIME format.
------=_NextPart_000_0533_01C46B2B.1819B440
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
GiD cannot directly read Cast3M results.
You must transform this results in a GiD postprocess file.
This format is documented in the GiD help: see "Postprocess data files"
GiD can also read FEMAP neutral results files, and Tecplot results =
files. I unknow if Cast3M can export this kind on files.
Regards
Enrique Escolano
----- Original Message -----=20
From: Nacho=20
To: gidlist at gatxan.cimne.upc.es=20
Sent: Wednesday, July 14, 2004 7:12 PM
Subject: [GiDlist] Cast3M
Hola!!
=BFEs posible realizar un postproceso con Gid de un problema =
din=E1mico resuelto con Cast3M? =BFC=F3mo puedo hacerlo ? Gracias.
Ignacio
ETSECCPB
------=_NextPart_000_0533_01C46B2B.1819B440
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"
HTMLHEAD
META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1"
META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR
STYLE/STYLE
/HEAD
BODY bgColor=3D#ffffff
DIVFONT face=3DArial size=3D2GiD cannot directly read Cast3M=20
results./FONT/DIV
DIVFONT face=3DArial size=3D2You must transform this results in a =
GiD=20
postprocess file./FONT/DIV
DIVFONT face=3DArial size=3D2This format is documented in the =
GiD=20
help: see "Postprocess data files"/FONT/DIV
DIVFONT face=3DArial size=3D2/FONT /DIV
DIVFONT face=3DArial size=3D2GiD can also read FEMAP neutral results
=
files, and=20
Tecplot results files. I unknow if Cast3M can export this kind on=20
files./FONT/DIV
DIVFONT face=3DArial size=3D2/FONT /DIV
DIVFONT face=3DArial size=3D2Regards/FONT/DIV
DIVFONT face=3DArial size=3D2/FONT /DIV
DIVFONT face=3DArial size=3D2Enrique Escolano/FONT/DIV
BLOCKQUOTE dir=3Dltr=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px"
DIV style=3D"FONT: 10pt arial"----- Original Message ----- /DIV
DIV=20
style=3D"BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: =
black"BFrom:/B=20
A title=3Dnachohp at terra.es href=3D"mailto:nachohp at terra.es"Nacho/A
=
/DIV
DIV style=3D"FONT: 10pt arial"BTo:/B A =
title=3Dgidlist at gatxan.cimne.upc.es=20
=
href=3D"mailto:gidlist at gatxan.cimne.upc.es"gidlist at gatxan.cimne.upc.es/=
A=20
/DIV
DIV style=3D"FONT: 10pt arial"BSent:/B Wednesday, July 14, 2004
=
7:12=20
PM/DIV
DIV style=3D"FONT: 10pt arial"BSubject:/B [GiDlist] Cast3M/DIV
DIVBR/DIV
DIVFONT face=3DArial size=3D2Hola!!/FONT/DIV
DIVFONT face=3DArial size=3D2=BFEs posible realizar un postproceso
=
con Gid de un=20
problema din=E1mico resuelto con Cast3M? =BFC=F3mo puedo hacerlo ?=20
Gracias./FONT/DIV
DIVFONT face=3DArial size=3D2/FONT /DIV
DIVFONT face=3DArial size=3D2Ignacio/FONT/DIV
DIVFONT face=3DArial =
size=3D2ETSECCPB/FONT/DIV/BLOCKQUOTE/BODY/HTML
------=_NextPart_000_0533_01C46B2B.1819B440--
--__--__--
_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist
End of GiDlist Digest
Your bad image (of your previous e-mail) show two overlapped labels: the
correct node number, and another number.
I unknow what's the cause. Maybe it's a problem related with the graphic
card.
Try to deactivate from Windows the graphic card acceleration.
Enrique Escolano
----- Original Message -----
From: "Marcias Martinez" martinez at aei.ca
To: gidlist at gatxan.cimne.upc.es
Cc: "Enrique Escolano" escolano at cimne.upc.es
Sent: Sunday, July 18, 2004 12:16 AM
Subject: [GiDlist] Re: GiDlist digest, Vol 1 #666 - 4 msgs
Hi Enrique,
Attached you will find the following files:
mesh.res
mesh.msh
and calc.txt (this is just for your information).
If you open the post-processing section and do a right click and then
label
all, you will see that the numbering presented by the element in 7.49 is
not
correct. If you do it in 7.2 you do get the correct numberying.
Let me know if you can duplicate the problem.
Take care,
Marcias Martinez
FWD 260032
Sip Phone: 1-747-669-4145
----- Original Message -----
From: gidlist-request at gatxan.cimne.upc.es
To: gidlist at gatxan.cimne.upc.es
Sent: Friday, July 16, 2004 6:01 AM
Subject: GiDlist digest, Vol 1 #666 - 4 msgs
Send GiDlist mailing list submissions to
gidlist at gid.cimne.upc.es
To subscribe or unsubscribe via the World Wide Web, visit
http://gid.cimne.upc.es/mailman/listinfo/gidlist
or, via email, send a message with subject or body 'help' to
gidlist-request at gid.cimne.upc.es
You can reach the person managing the list at
gidlist-admin at gid.cimne.upc.es
When replying, please edit your Subject line so it is more specific
than "Re: Contents of GiDlist digest..."
______________________________________________________________________
Los envios para la lista de correo GiDlist han de enviarse a
gidlist at gid.cimne.upc.es
Para subscribirse o desapuntarse via World Wide Web, visite
http://gid.cimne.upc.es/mailman/listinfo/gidlist
o, via email, enviando un mensaje con 'help' en el 'asunto' o 'cuerpo'
a
gidlist-request at gid.cimne.upc.es
Puede contactar con la persona que administra la lista bajo
gidlist-admin at gid.cimne.upc.es
Cuando responda, por favor, edite la linea del 'asunto' para que sea
más especifica que "Re: Contenido resumen de GiDlist ..."
Today's Topics:
1. floating point precision (Rama Karve)
2. RE: floating point precision (=?iso-8859-1?Q?Ramon_Rib=F3?=)
3. Re: Label Numberying in the GID 7.49 (Enrique Escolano)
4. Re: Cast3M (Enrique Escolano)
--__--__--
Message: 1
Date: Thu, 15 Jul 2004 06:34:22 -0700 (PDT)
From: Rama Karve ka_rama at yahoo.com
To: gidlist at gatxan.cimne.upc.es
Subject: [GiDlist] floating point precision
Reply-To: gidlist at gid.cimne.upc.es
--0-751808302-1089898462=:36223
Content-Type: text/plain; charset=us-ascii
Hi,
I am using Files - Export - Text Data Report to get
the geometry information.
How do I change/increase the floating point precision
for the coordinates and other numerical data that are
written to the file?
Thanks,
Rama Karve
---------------------------------
Do you Yahoo!?
Take Yahoo! Mail with you! Get it on your mobile phone.
--0-751808302-1089898462=:36223
Content-Type: text/html; charset=us-ascii
DIVHi,BRBRI am using Files -> Export -> Text Data Report to
getBRthe geometry information. BRBRHow do I change/increase the
floating point precisionBRfor the coordinates and other numerical data
that areBRwritten to the file?BRBRThanks,BRRama Karve/DIVp
hr size=1Do you Yahoo!?br
a
href="http://us.rd.yahoo.com/mail_us/taglines/mobile/*http://mobile.yahoo.co
m/maildemo"Take Yahoo! Mail with you!/a Get it on your mobile phone.
--0-751808302-1089898462=:36223--
--__--__--
Message: 2
From: =?iso-8859-1?Q?Ramon_Rib=F3?= ramsan at compassis.com
To: gidlist at gatxan.cimne.upc.es
Subject: RE: [GiDlist] floating point precision
Date: Thu, 15 Jul 2004 21:56:41 +0200
Reply-To: gidlist at gid.cimne.upc.es
This is a multi-part message in MIME format.
------=_NextPart_000_0001_01C46AB6.9C826580
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
Hello,
You will have to use a .bas file to obtain arbitrary precission.
Check:
Help-customization help
for details.
Regards,
--
Compass Ing. y Sistemas Dr. Ramon Ribo
http://www.compassis.com http://www.compassis.com/
ramsan at compassis.com
c/ Manuel Girona, 61 bajos tel. +34 93 204 10 82
08034 Barcelona, Spain fax. +34 93 204 19 09
-----Mensaje original-----
De: gidlist-admin at gatxan.cimne.upc.es
[mailto:gidlist-admin at gatxan.cimne.upc.es] En nombre de Rama Karve
Enviado el: jueves, 15 de julio de 2004 15:34
Para: gidlist at gatxan.cimne.upc.es
Asunto: [GiDlist] floating point precision
Hi,
I am using Files - Export - Text Data Report to get
the geometry information.
How do I change/increase the floating point precision
for the coordinates and other numerical data that are
written to the file?
Thanks,
Rama Karve
_____
Do you Yahoo!?
Take
http://us.rd.yahoo.com/mail_us/taglines/mobile/*http://mobile.yahoo.com
/maildemo Yahoo! Mail with you! Get it on your mobile phone.
------=_NextPart_000_0001_01C46AB6.9C826580
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"
HTMLHEAD
META HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; =
charset=3Diso-8859-1"
TITLEMensaje/TITLE
META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR/HEAD
BODY
DIVFONT face=3DArial size=3D2/FONT /DIV
DIVSPAN class=3D171392019-15072004FONT face=3DArial =
size=3D2 =20
Hello,/FONT/SPAN/DIV
DIVSPAN class=3D171392019-15072004FONT face=3DArial=20
size=3D2/FONT/SPAN /DIV
DIVSPAN class=3D171392019-15072004FONT face=3DArial =
size=3D2 =20
You will have to use a .bas file to obtain arbitrary precission.=20
Check:/FONT/SPAN/DIV
DIVSPAN class=3D171392019-15072004FONT face=3DArial=20
size=3D2/FONT/SPAN /DIV
DIVSPAN class=3D171392019-15072004FONT face=3DArial =
size=3D2 =20
Help->customization help/FONT/SPAN/DIV
DIVSPAN class=3D171392019-15072004FONT face=3DArial=20
size=3D2/FONT/SPAN /DIV
DIVSPAN class=3D171392019-15072004FONT face=3DArial =
size=3D2 =20
for details./FONT/SPAN/DIV
DIVFONT face=3DArial size=3D2/FONT /DIV
DIVSPAN class=3D171392019-15072004FONT face=3DArial =
size=3D2 =20
Regards,/FONT/SPAN/DIV!-- Converted from text/plain format --
PFONT size=3D2--BRCompass Ing. y =
Sistemas Dr.=20
Ramon RiboBRA=20
href=3D"http://www.compassis.com/"a href="http://www.compassis.com/A"http://www.c ... nbsp;&nbs=
p; =20
ramsan at compassis.comBRc/ Manuel Girona, 61 bajos tel. +34
=
93 204=20
10 82BR08034 Barcelona, Spain fax.
=
+34 93=20
204 19 09 /FONT/P
BLOCKQUOTE style=3D"MARGIN-RIGHT: 0px"
DIV/DIV
DIV class=3DOutlookMessageHeader lang=3Des dir=3Dltr =
align=3DleftFONT face=3DTahoma=20
size=3D2-----Mensaje original-----BRBDe:/B=20
gidlist-admin at gatxan.cimne.upc.es =
[mailto:gidlist-admin at gatxan.cimne.upc.es]=20
BEn nombre de /BRama KarveBRBEnviado el:/B jueves, 15 de =
julio de=20
2004 15:34BRBPara:/B =
gidlist at gatxan.cimne.upc.esBRBAsunto:/B=20
[GiDlist] floating point precisionBRBR/FONT/DIV
DIVHi,BRBRI am using Files -> Export -> Text Data Report =
to=20
getBRthe geometry information. BRBRHow do I change/increase the
=
floating=20
point precisionBRfor the coordinates and other numerical data
that=20
areBRwritten to the file?BRBRThanks,BRRama Karve/DIV
P
HR SIZE=3D1
Do you Yahoo!?BRA=20
=
href=3D"http://us.rd.yahoo.com/mail_us/taglines/mobile/*http://mobile.yah=
oo.com/maildemo"Take=20
Yahoo! Mail with you!/A Get it on your mobile=20
phone./BLOCKQUOTE/BODY/HTML
------=_NextPart_000_0001_01C46AB6.9C826580--
--__--__--
Message: 3
From: "Enrique Escolano" escolano at cimne.upc.es
To: gidlist at gatxan.cimne.upc.es
Subject: Re: [GiDlist] Label Numberying in the GID 7.49
Date: Thu, 15 Jul 2004 23:28:30 +0200
Reply-To: gidlist at gid.cimne.upc.es
This is a multi-part message in MIME format.
------=_NextPart_000_04DB_01C46AC3.7007C1A0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
You used the same mesh and results file for both pictures??
What's the process to create this two images?=20
Have you used exactly the same procedure with GiD7.2 and GiD7.4.9b?
Enrique
----- Original Message -----=20
From: Marcias Martinez=20
To: Enrique Escolano=20
Cc: gidlist at gatxan.cimne.upc.es=20
Sent: Thursday, July 15, 2004 3:07 AM
Subject: [GiDlist] Label Numberying in the GID 7.49
Hi Enrique,
I think the label numberying in GID beta 7.49 is not working =
correctly. Here is two JPG files, one done in 7.2 and another in 7.49 =
(the same result file). The label attached to each node is totaly =
different. The 7.2 label numberying makes sense the 7.49 does not.=20
Marcias
------=_NextPart_000_04DB_01C46AC3.7007C1A0
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"
HTMLHEAD
META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1"
META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR
STYLE/STYLE
/HEAD
BODY bgColor=3D#ffffff
DIVFONT face=3DArial size=3D2You used the same mesh and results
=
file for both pictures??/FONT/DIV
DIVFONT face=3DArial size=3D2What's the process to create this two =
images?=20
/FONT/DIV
DIVFONT face=3DArial size=3D2Have you used exactly the same =
procedure with=20
GiD7.2 and GiD7.4.9b?/FONT/DIV
DIVFONT face=3DArial size=3D2/FONT /DIV
DIVFONT face=3DArial size=3D2Enrique/FONT/DIV
BLOCKQUOTE dir=3Dltr=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px"
DIV style=3D"FONT: 10pt arial"----- Original Message ----- /DIV
DIV=20
style=3D"BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: =
black"BFrom:/B=20
A title=3Dmartinez at aei.ca href=3D"mailto:martinez at aei.ca"Marcias =
Martinez/A=20
/DIV
DIV style=3D"FONT: 10pt arial"BTo:/B A =
title=3Descolano at cimne.upc.es=20
href=3D"mailto:escolano at cimne.upc.es"Enrique Escolano/A /DIV
DIV style=3D"FONT: 10pt arial"BCc:/B A =
title=3Dgidlist at gatxan.cimne.upc.es=20
=
href=3D"mailto:gidlist at gatxan.cimne.upc.es"gidlist at gatxan.cimne.upc.es/=
A=20
/DIV
DIV style=3D"FONT: 10pt arial"BSent:/B Thursday, July 15, 2004 =
3:07=20
AM/DIV
DIV style=3D"FONT: 10pt arial"BSubject:/B [GiDlist] Label =
Numberying in=20
the GID 7.49/DIV
DIVBR/DIV
DIVFONT face=3DArial size=3D2Hi Enrique,/FONT/DIV
DIVFONT face=3DArial size=3D2/FONT /DIV
DIVFONT face=3DArial size=3D2I think the label numberying in GID =
beta 7.49 is=20
not working correctly. Here is two JPG files, one done in =
7.2 and=20
another in 7.49 (the same result file). The label attached to each =
node is=20
totaly different. The 7.2 label numberying makes sense the 7.49 does =
not.=20
BR/FONT/DIV
DIVFONT face=3DArial size=3D2/FONT /DIV
DIVFONT face=3DArial =
size=3D2Marcias/FONT/DIV/BLOCKQUOTE/BODY/HTML
------=_NextPart_000_04DB_01C46AC3.7007C1A0--
--__--__--
Message: 4
From: "Enrique Escolano" escolano at cimne.upc.es
To: gidlist at gatxan.cimne.upc.es
Subject: Re: [GiDlist] Cast3M
Date: Fri, 16 Jul 2004 11:50:30 +0200
Reply-To: gidlist at gid.cimne.upc.es
This is a multi-part message in MIME format.
------=_NextPart_000_0533_01C46B2B.1819B440
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
GiD cannot directly read Cast3M results.
You must transform this results in a GiD postprocess file.
This format is documented in the GiD help: see "Postprocess data files"
GiD can also read FEMAP neutral results files, and Tecplot results =
files. I unknow if Cast3M can export this kind on files.
Regards
Enrique Escolano
----- Original Message -----=20
From: Nacho=20
To: gidlist at gatxan.cimne.upc.es=20
Sent: Wednesday, July 14, 2004 7:12 PM
Subject: [GiDlist] Cast3M
Hola!!
=BFEs posible realizar un postproceso con Gid de un problema =
din=E1mico resuelto con Cast3M? =BFC=F3mo puedo hacerlo ? Gracias.
Ignacio
ETSECCPB
------=_NextPart_000_0533_01C46B2B.1819B440
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"
HTMLHEAD
META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1"
META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR
STYLE/STYLE
/HEAD
BODY bgColor=3D#ffffff
DIVFONT face=3DArial size=3D2GiD cannot directly read Cast3M=20
results./FONT/DIV
DIVFONT face=3DArial size=3D2You must transform this results in a =
GiD=20
postprocess file./FONT/DIV
DIVFONT face=3DArial size=3D2This format is documented in the =
GiD=20
help: see "Postprocess data files"/FONT/DIV
DIVFONT face=3DArial size=3D2/FONT /DIV
DIVFONT face=3DArial size=3D2GiD can also read FEMAP neutral results
=
files, and=20
Tecplot results files. I unknow if Cast3M can export this kind on=20
files./FONT/DIV
DIVFONT face=3DArial size=3D2/FONT /DIV
DIVFONT face=3DArial size=3D2Regards/FONT/DIV
DIVFONT face=3DArial size=3D2/FONT /DIV
DIVFONT face=3DArial size=3D2Enrique Escolano/FONT/DIV
BLOCKQUOTE dir=3Dltr=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px"
DIV style=3D"FONT: 10pt arial"----- Original Message ----- /DIV
DIV=20
style=3D"BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: =
black"BFrom:/B=20
A title=3Dnachohp at terra.es href=3D"mailto:nachohp at terra.es"Nacho/A
=
/DIV
DIV style=3D"FONT: 10pt arial"BTo:/B A =
title=3Dgidlist at gatxan.cimne.upc.es=20
=
href=3D"mailto:gidlist at gatxan.cimne.upc.es"gidlist at gatxan.cimne.upc.es/=
A=20
/DIV
DIV style=3D"FONT: 10pt arial"BSent:/B Wednesday, July 14, 2004
=
7:12=20
PM/DIV
DIV style=3D"FONT: 10pt arial"BSubject:/B [GiDlist] Cast3M/DIV
DIVBR/DIV
DIVFONT face=3DArial size=3D2Hola!!/FONT/DIV
DIVFONT face=3DArial size=3D2=BFEs posible realizar un postproceso
=
con Gid de un=20
problema din=E1mico resuelto con Cast3M? =BFC=F3mo puedo hacerlo ?=20
Gracias./FONT/DIV
DIVFONT face=3DArial size=3D2/FONT /DIV
DIVFONT face=3DArial size=3D2Ignacio/FONT/DIV
DIVFONT face=3DArial =
size=3D2ETSECCPB/FONT/DIV/BLOCKQUOTE/BODY/HTML
------=_NextPart_000_0533_01C46B2B.1819B440--
--__--__--
_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist
End of GiDlist Digest
-
Enrique Escolano
[GiDlist] Re: draw some materials?
It not exists any intrinsic command to draw a group of materials at same time, only is possible to draw one by one or all.
Now it's not possible to do it with tcl.
With the next GiD 7.4.10b beta version will be possible, by using a new GiD-tcl command : drawopengl drawentity, to draw a GiD entity
This is a sample to draw the surface number 1 filled with blue color.
Instead to draw this surface number 1, can use some info command to select the surfaces with the desired material.
proc InitDrawSurface { } {
set ::MyPriv [drawopengl register drawsurface1]
GiD_Process redraw
}
proc drawsurface1 { } {
#set color=blue (rgb=0 0 1) and draw filled the surface number 1
drawopengl draw -color { 0.0 0.0 1.0 }
drawopengl drawentity -mode filled surface 1
}
proc EndDrawSurface { } {
drawopengl unregister $::MyPriv
}
InitDrawSurface
Enrique Escolano
-----Mensaje original-----
De: Jose Antonio Fernandez [mailto:Jose.A.Fernandez at cedex.es]
Enviado el: jueves, 15 de julio de 2004 12:27
Para: 'gidlist-admin at gatxan.cimne.upc.es'
Asunto: draw some materials?
Dear Gid Team,
is it possible to draw several materials at the same time and not draw one
by one or -drawall- ?
how can I write a tcl code on my problemstype directory to do it?
Thank you, best regards,
Jose Antonio
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20040721/65ee25d6/attachment.htm
Now it's not possible to do it with tcl.
With the next GiD 7.4.10b beta version will be possible, by using a new GiD-tcl command : drawopengl drawentity, to draw a GiD entity
This is a sample to draw the surface number 1 filled with blue color.
Instead to draw this surface number 1, can use some info command to select the surfaces with the desired material.
proc InitDrawSurface { } {
set ::MyPriv [drawopengl register drawsurface1]
GiD_Process redraw
}
proc drawsurface1 { } {
#set color=blue (rgb=0 0 1) and draw filled the surface number 1
drawopengl draw -color { 0.0 0.0 1.0 }
drawopengl drawentity -mode filled surface 1
}
proc EndDrawSurface { } {
drawopengl unregister $::MyPriv
}
InitDrawSurface
Enrique Escolano
-----Mensaje original-----
De: Jose Antonio Fernandez [mailto:Jose.A.Fernandez at cedex.es]
Enviado el: jueves, 15 de julio de 2004 12:27
Para: 'gidlist-admin at gatxan.cimne.upc.es'
Asunto: draw some materials?
Dear Gid Team,
is it possible to draw several materials at the same time and not draw one
by one or -drawall- ?
how can I write a tcl code on my problemstype directory to do it?
Thank you, best regards,
Jose Antonio
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20040721/65ee25d6/attachment.htm
-
Zhihong Liu
[GiDlist] Re: .bas
Dear all,
I have a question on how to write a command in the template file (.bas) for listing the tabular data.
Thanks.
-- Zhihong Liu
Attached:
**********************************************************************************
prb file
**********************************************************************************
PROBLEM DATA
...
QUESTION: Schedule(day,time_1,time_2,time_3,time_4,time_5,time_6)
VALUE: #N# 7 1 00:00:00 00:00:00 00:00:00 00:00:00 00:00:00 00:00:00
...
END PROBLEM DATA
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20040722/736578e8/attachment.htm
I have a question on how to write a command in the template file (.bas) for listing the tabular data.
Thanks.
-- Zhihong Liu
Attached:
**********************************************************************************
prb file
**********************************************************************************
PROBLEM DATA
...
QUESTION: Schedule(day,time_1,time_2,time_3,time_4,time_5,time_6)
VALUE: #N# 7 1 00:00:00 00:00:00 00:00:00 00:00:00 00:00:00 00:00:00
...
END PROBLEM DATA
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20040722/736578e8/attachment.htm
-
Enrique Escolano
[GiDlist] Re: .bas
*.prb file
...
QUESTION: Schedule(day,time_1,time_2,time_3,time_4,time_5,time_6)
VALUE: #N# 7 1 00:00:00 00:00:00 00:00:00 00:00:00 00:00:00 00:00:00
...
This is a sample of *.bas file (untested, it can contain some small bug)
*set var line=0
*for(i=1;i=GenData(Schedule,int);i=i+1)
*GenData(Schedule,*i,real)*\
*matprop(Table_Interpolation_Values,*i,real) *\
*set var line=line+1
*if(line==7)
*endif
*endif
Regards
Enrique Escolano
----- Original Message -----
From: Zhihong Liu
To: gidlist at gatxan.cimne.upc.es
Sent: Thursday, July 22, 2004 7:48 AM
Subject: [GiDlist] Re: .bas
Dear all,
I have a question on how to write a command in the template file (.bas) for listing the tabular data.
Thanks.
-- Zhihong Liu
Attached:
**********************************************************************************
prb file
**********************************************************************************
PROBLEM DATA
...
QUESTION: Schedule(day,time_1,time_2,time_3,time_4,time_5,time_6)
VALUE: #N# 7 1 00:00:00 00:00:00 00:00:00 00:00:00 00:00:00 00:00:00
...
END PROBLEM DATA
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20040722/f61c4291/attachment.htm
...
QUESTION: Schedule(day,time_1,time_2,time_3,time_4,time_5,time_6)
VALUE: #N# 7 1 00:00:00 00:00:00 00:00:00 00:00:00 00:00:00 00:00:00
...
This is a sample of *.bas file (untested, it can contain some small bug)
*set var line=0
*for(i=1;i=GenData(Schedule,int);i=i+1)
*GenData(Schedule,*i,real)*\
*matprop(Table_Interpolation_Values,*i,real) *\
*set var line=line+1
*if(line==7)
*endif
*endif
Regards
Enrique Escolano
----- Original Message -----
From: Zhihong Liu
To: gidlist at gatxan.cimne.upc.es
Sent: Thursday, July 22, 2004 7:48 AM
Subject: [GiDlist] Re: .bas
Dear all,
I have a question on how to write a command in the template file (.bas) for listing the tabular data.
Thanks.
-- Zhihong Liu
Attached:
**********************************************************************************
prb file
**********************************************************************************
PROBLEM DATA
...
QUESTION: Schedule(day,time_1,time_2,time_3,time_4,time_5,time_6)
VALUE: #N# 7 1 00:00:00 00:00:00 00:00:00 00:00:00 00:00:00 00:00:00
...
END PROBLEM DATA
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20040722/f61c4291/attachment.htm