[GiDlist] Re: copy and create mesh failed

Moderator: GiD Team

Post Reply
Aphrodite Kerylidis

[GiDlist] Re: copy and create mesh failed

Post by Aphrodite Kerylidis »

Hi Miguel,

I have installed recently version 7.4.7b due to my
problem I have got.
I briefly describe the steps I am doing which lead to
the crash:

# My program has calculated half of the system's
deformation figure and has generated out of its
internal data the output files deformation.msh and
deformation.res. This is possible, because the
problem is symmetric and can be mirrored. I will send
both file as attachment.
# I open the files in the postprocessing mode and can
now visualize half of the system's deformed mesh.
# Then I am going to mirror the figure in order to
make it whole with
* utilities-copy
* switch there on mirror and two dimensions
* pick to corner nodes
* change to create
* and press "do it"
# Then with version 7.4.7 (I used before 7.2) no crash
is happening, but instead I get a error message in Tcl
script: Can't read "PostCopyInfo(PostDuplicateWhat)":
No such element in array
# Now I press either ok or skip and the message window
disappears, but the mirroring is not done.
# However I just want to view and not to create the
mirrored figure, this works.

Aphrodite




What do you mean with 'generate mesh'?
Do you mean to use the 'create' option of the
Utilities-copy window?
Can you send us an example and the exact steps you
followed to get to error?
Have you tried the latest 7.4.9?
Thanks in advance

miguel

-----Mensaje original-----
De: gidlist-admin at gatxan.cimne.upc.es
[mailto:gidlist-admin at gatxan.cimne.upc.es] En nombre
de Aphrodite Kerylidis
Enviado el: jueves, 01 de julio de 2004 19:04
Para: gidlist at gatxan.cimne.upc.es
Asunto: [GiDlist] copy and create mesh failed

Hello,

I have installed the professional GID version 7.2 on
my linux Redhat 8.0
computer. Everything works fine except when trying
to copy and generate mesh in
the postprocessing mode. My postprocessing files are
written in the new format
and I can open and visualize my results. I can also
copy the existing mesh and
view it, but I can NOT generate the copied new mesh
afterwards. If I try to do
it, the whole program always breaks down. I have now
tried to utilize on my
other computer, which has installed Linux and
Windows 2000 as well, older and
newer versions of GID (6.2,7.1,7.4.7), but in vain.
What might be the reason
for this problem?
Thanks for any help.

Aphrodite



__________________________________
Do you Yahoo!?
Yahoo! Mail is new and improved - Check it out!
http://promotions.yahoo.com/new_mail

=== message truncated ===

__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: deformations.res
Type: application/octet-stream
Size: 1055453 bytes
Desc: deformations.res
Url : http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20040703/59040bed/attachment.obj
-------------- next part --------------
A non-text attachment was scrubbed...
Name: deformations.msh
Type: model/mesh
Size: 2954 bytes
Desc: deformations.msh
Url : http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20040703/59040bed/attachment.msh
Miguel A. Pasenau de Riera

[GiDlist] Re: copy and create mesh failed

Post by Miguel A. Pasenau de Riera »

Hi Aphrodite,

Yes, there was a problem with this variable and its solved in the last gid
7.4.9b version. Today or tomorrow this version will be available for Linux.

Thanks for your patience.

miguel

-----Mensaje original-----
De: gidlist-admin at gatxan.cimne.upc.es
[mailto:gidlist-admin at gatxan.cimne.upc.es] En nombre de Aphrodite Kerylidis
Enviado el: sábado, 03 de julio de 2004 10:42
Para: gidlist at gatxan.cimne.upc.es
Asunto: [GiDlist] Re: copy and create mesh failed

Hi Miguel,

I have installed recently version 7.4.7b due to my problem I have got.
I briefly describe the steps I am doing which lead to the crash:

# My program has calculated half of the system's deformation figure and has
generated out of its internal data the output files deformation.msh and
deformation.res. This is possible, because the problem is symmetric and can be
mirrored. I will send both file as attachment.
# I open the files in the postprocessing mode and can now visualize half of the
system's deformed mesh.
# Then I am going to mirror the figure in order to make it whole with
* utilities-copy
* switch there on mirror and two dimensions
* pick to corner nodes
* change to create
* and press "do it"
# Then with version 7.4.7 (I used before 7.2) no crash is happening, but
instead I get a error message in Tcl
script: Can't read "PostCopyInfo(PostDuplicateWhat)":
No such element in array
# Now I press either ok or skip and the message window disappears, but the
mirroring is not done.
# However I just want to view and not to create the mirrored figure, this
works.

Aphrodite




What do you mean with 'generate mesh'?
Do you mean to use the 'create' option of the
Utilities-copy window?
Can you send us an example and the exact steps you followed to get to
error?
Have you tried the latest 7.4.9?
Thanks in advance

miguel

-----Mensaje original-----
De: gidlist-admin at gatxan.cimne.upc.es
[mailto:gidlist-admin at gatxan.cimne.upc.es] En nombre de Aphrodite
Kerylidis Enviado el: jueves, 01 de julio de 2004 19:04
Para: gidlist at gatxan.cimne.upc.es
Asunto: [GiDlist] copy and create mesh failed

Hello,

I have installed the professional GID version 7.2 on my linux Redhat
8.0 computer. Everything works fine except when trying to copy and
generate mesh in the postprocessing mode. My postprocessing files are
written in the new format and I can open and visualize my results. I
can also copy the existing mesh and view it, but I can NOT generate
the copied new mesh afterwards. If I try to do it, the whole program
always breaks down. I have now tried to utilize on my other computer,
which has installed Linux and Windows 2000 as well, older and newer
versions of GID (6.2,7.1,7.4.7), but in vain.
What might be the reason
for this problem?
Thanks for any help.

Aphrodite



__________________________________
Do you Yahoo!?
Yahoo! Mail is new and improved - Check it out!
http://promotions.yahoo.com/new_mail

=== message truncated ===

__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
Miguel A. Pasenau de Riera

[GiDlist] Re: copy and create mesh failed

Post by Miguel A. Pasenau de Riera »

I posted today the gid version 7.4.9b for Linux, so you can download it from

ftp://www.gidhome.com/pub/gid_adds/Linux

Best regards

miguel

-----Mensaje original-----
De: gidlist-admin at gatxan.cimne.upc.es
[mailto:gidlist-admin at gatxan.cimne.upc.es] En nombre de Aphrodite Kerylidis
Enviado el: sábado, 03 de julio de 2004 10:42
Para: gidlist at gatxan.cimne.upc.es
Asunto: [GiDlist] Re: copy and create mesh failed

Hi Miguel,

I have installed recently version 7.4.7b due to my problem I have got.
I briefly describe the steps I am doing which lead to the crash:

# My program has calculated half of the system's deformation figure and has
generated out of its internal data the output files deformation.msh and
deformation.res. This is possible, because the problem is symmetric and can be
mirrored. I will send both file as attachment.
# I open the files in the postprocessing mode and can now visualize half of the
system's deformed mesh.
# Then I am going to mirror the figure in order to make it whole with
* utilities-copy
* switch there on mirror and two dimensions
* pick to corner nodes
* change to create
* and press "do it"
# Then with version 7.4.7 (I used before 7.2) no crash is happening, but
instead I get a error message in Tcl
script: Can't read "PostCopyInfo(PostDuplicateWhat)":
No such element in array
# Now I press either ok or skip and the message window disappears, but the
mirroring is not done.
# However I just want to view and not to create the mirrored figure, this
works.

Aphrodite




What do you mean with 'generate mesh'?
Do you mean to use the 'create' option of the
Utilities-copy window?
Can you send us an example and the exact steps you followed to get to
error?
Have you tried the latest 7.4.9?
Thanks in advance

miguel

-----Mensaje original-----
De: gidlist-admin at gatxan.cimne.upc.es
[mailto:gidlist-admin at gatxan.cimne.upc.es] En nombre de Aphrodite
Kerylidis Enviado el: jueves, 01 de julio de 2004 19:04
Para: gidlist at gatxan.cimne.upc.es
Asunto: [GiDlist] copy and create mesh failed

Hello,

I have installed the professional GID version 7.2 on my linux Redhat
8.0 computer. Everything works fine except when trying to copy and
generate mesh in the postprocessing mode. My postprocessing files are
written in the new format and I can open and visualize my results. I
can also copy the existing mesh and view it, but I can NOT generate
the copied new mesh afterwards. If I try to do it, the whole program
always breaks down. I have now tried to utilize on my other computer,
which has installed Linux and Windows 2000 as well, older and newer
versions of GID (6.2,7.1,7.4.7), but in vain.
What might be the reason
for this problem?
Thanks for any help.

Aphrodite



__________________________________
Do you Yahoo!?
Yahoo! Mail is new and improved - Check it out!
http://promotions.yahoo.com/new_mail

=== message truncated ===

__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
Post Reply