[GiDlist] Un able to mesh

Moderator: GiD Team

Post Reply
Khaled Obeidat

[GiDlist] Un able to mesh

Post by Khaled Obeidat »

Hello GID people,

I am trying desperately to mesh a simple rectangle volume (100*65*3.18)
using Tetrahedral of mesh size 0.5.
Can you please help me in meshing this structure.

Khaled



Khaled Obeidat
Research Engineer
EMAG Technologies, Inc.
www.emagtechnologies.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20040429/0aaab0f8/attachment.htm
-------------- next part --------------
A non-text attachment was scrubbed...
Name: FDTD_Proximity1.zip
Type: application/zip
Size: 945 bytes
Desc: not available
Url : http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20040429/0aaab0f8/attachment.zip
Ramon Ribó

[GiDlist] Un able to mesh

Post by Ramon Ribó »

Hello,

You are trying to mesh the model with "only points", instead of
tetrahedra. Try to
use: Meshing-Elemtype-Tetrahedra and apply it to the volume.

Regards,

--
Compass Ing. y Sistemas Dr. Ramon Ribo
http://www.compassis.com http://www.compassis.com/
ramsan at compassis.com
c/ Manuel Girona, 61 bajos tel. +34 93 204 10 82
08034 Barcelona, Spain fax. +34 93 204 19 09

-----Mensaje original-----
De: gidlist-admin at gatxan.cimne.upc.es
[mailto:gidlist-admin at gatxan.cimne.upc.es] En nombre de Khaled Obeidat
Enviado el: miércoles, 28 de abril de 2004 22:52
Para: gidlist at gatxan.cimne.upc.es
Asunto: [GiDlist] Un able to mesh


Hello GID people,

I am trying desperately to mesh a simple rectangle volume (100*65*3.18)
using Tetrahedral of mesh size 0.5.
Can you please help me in meshing this structure.

Khaled




Khaled Obeidat
Research Engineer
EMAG Technologies, Inc.
www.emagtechnologies.com http://www.emagtechnologies.com/


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20040429/ca23d2d9/attachment.htm
Khaled Obeidat

[GiDlist] Un able to mesh

Post by Khaled Obeidat »

I did that but it didn't work.


At 10:59 AM 4/29/2004, you wrote:

Hello,

You are trying to mesh the model with "only points", instead of
tetrahedra. Try to
use: Meshing-Elemtype-Tetrahedra and apply it to the volume.

Regards,

--
Compass Ing. y Sistemas Dr. Ramon Ribo
http://www.compassis.com/http://www.compassis.com ramsan at compassis.com
c/ Manuel Girona, 61 bajos tel. +34 93 204 10 82
08034 Barcelona, Spain fax. +34 93 204 19 09
-----Mensaje original-----
De: gidlist-admin at gatxan.cimne.upc.es
[mailto:gidlist-admin at gatxan.cimne.upc.es] En nombre de Khaled Obeidat
Enviado el: miércoles, 28 de abril de 2004 22:52
Para: gidlist at gatxan.cimne.upc.es
Asunto: [GiDlist] Un able to mesh

Hello GID people,

I am trying desperately to mesh a simple rectangle volume (100*65*3.18)
using Tetrahedral of mesh size 0.5.
Can you please help me in meshing this structure.

Khaled


Khaled Obeidat
Research Engineer
EMAG Technologies, Inc.
www.emagtechnologies.com

Khaled Obeidat
Research Engineer
EMAG Technologies, Inc.
www.emagtechnologies.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20040430/49c488aa/attachment.htm
Ramon Ribó

[GiDlist] Un able to mesh

Post by Ramon Ribó »

Hello,

I tried it and it worked for me. How much memory do you have in your
computer? As the mesh size is quite small, I would recommend at least
512Mb of RAM.

Regards,

--
Compass Ing. y Sistemas Dr. Ramon Ribo
http://www.compassis.com http://www.compassis.com/
ramsan at compassis.com
c/ Manuel Girona, 61 bajos tel. +34 93 204 10 82
08034 Barcelona, Spain fax. +34 93 204 19 09

-----Mensaje original-----
De: gidlist-admin at gatxan.cimne.upc.es
[mailto:gidlist-admin at gatxan.cimne.upc.es] En nombre de Khaled Obeidat
Enviado el: viernes, 30 de abril de 2004 13:52
Para: gidlist at gatxan.cimne.upc.es
Asunto: RE: [GiDlist] Un able to mesh


I did that but it didn't work.


At 10:59 AM 4/29/2004, you wrote:



Hello,

You are trying to mesh the model with "only points", instead of
tetrahedra. Try to
use: Meshing-Elemtype-Tetrahedra and apply it to the volume.

Regards,

--
Compass Ing. y Sistemas Dr. Ramon Ribo
http://www.compassis.com http://www.compassis.com/
ramsan at compassis.com
c/ Manuel Girona, 61 bajos tel. +34 93 204 10 82
08034 Barcelona, Spain fax. +34 93 204 19 09


-----Mensaje original-----


De: gidlist-admin at gatxan.cimne.upc.es
[mailto:gidlist-admin at gatxan.cimne.upc.es] En nombre de Khaled Obeidat


Enviado el: miércoles, 28 de abril de 2004 22:52


Para: gidlist at gatxan.cimne.upc.es


Asunto: [GiDlist] Un able to mesh



Hello GID people,



I am trying desperately to mesh a simple rectangle volume (100*65*3.18)
using Tetrahedral of mesh size 0.5.


Can you please help me in meshing this structure.



Khaled




Khaled Obeidat


Research Engineer


EMAG Technologies, Inc.


www.emagtechnologies.com http://www.emagtechnologies.com/





Khaled Obeidat
Research Engineer
EMAG Technologies, Inc.
www.emagtechnologies.com http://www.emagtechnologies.com/


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20040430/ee741538/attachment.htm
Post Reply