Dear GiD team,
I append a "example.gid.zip" file with the geometry and the condition "Contour_Line"
applied.
NUMBER: 14 CONDITION: Contour_Line
CONDTYPE: over lines
CONDMESHTYPE: over face elements
QUESTION: ForSpectralElements
VALUE: 0
STATE: HIDDEN
END CONDITION
Every surface is a different material as you suggested me some time ago.
The command:
-np- WarnWinText [.central.s info conditions Contour_Line mesh]
gives a Tcl list with all quadratical elements, but without the triangular elements (with
IDs from 21 to 28).
I need information on triangular elements as well.
Thanks for any suggestion.
Kind Regards
Andrea
Andrea Calaon
Ashurst Lodge, Ashurst
Southampton, Hampshire
SO40 7AA, UK
Tel. office: +44 23 80 293 223
Fax office: +44 23 80 292 853
Homepage: http://mailserver1.wessex.ac.uk/~acalaon
Mobile: +44 7766 488 225
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20040415/a0a071a5/attachment.htm
-------------- next part --------------
The following section of this message contains a file attachment
prepared for transmission using the Internet MIME message format.
If you are using Pegasus Mail, or any another MIME-compliant system,
you should be able to save it or view it from within your mailer.
If you cannot, please ask your system administrator for assistance.
---- File information -----------
File: example.gid.zip
Date: 15 Apr 2004, 16:08
Size: 5460 bytes.
Type: ZIP-archive
-------------- next part --------------
A non-text attachment was scrubbed...
Name: example.gid.zip
Type: application/zip
Size: 5460 bytes
Desc: not available
Url : http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20040415/a0a071a5/attachment.zip
[GiDlist] Example for the
Moderator: GiD Team
-
Enrique Escolano
[GiDlist] Example for the
Yes, it's a bug transferring conditions over lines, over face elements, when the edge is a boundary between
quadrilateral and triangular meshes.
It's corrected for next beta 7.4.7b (not available now)
Thanks for your bug report
Enrique
----- Original Message -----
From: Andrea Calaon
To: gidlist at gatxan.cimne.upc.es
Sent: Thursday, April 15, 2004 5:20 PM
Subject: [GiDlist] Example for the
Dear GiD team,
I append a "example.gid.zip" file with the geometry and the condition "Contour_Line" applied.
NUMBER: 14 CONDITION: Contour_Line
CONDTYPE: over lines
CONDMESHTYPE: over face elements
QUESTION: ForSpectralElements
VALUE: 0
STATE: HIDDEN
END CONDITION
Every surface is a different material as you suggested me some time ago.
The command:
-np- WarnWinText [.central.s info conditions Contour_Line mesh]
gives a Tcl list with all quadratical elements, but without the triangular elements (with IDs from 21 to 28).
I need information on triangular elements as well.
Thanks for any suggestion.
Kind Regards
Andrea
Andrea Calaon
Ashurst Lodge, Ashurst
Southampton, Hampshire
SO40 7AA, UK
Tel. office: +44 23 80 293 223
Fax office: +44 23 80 292 853
Homepage: http://mailserver1.wessex.ac.uk/~acalaon
Mobile: +44 7766 488 225
------------------------------------------------------------------------------
The following section of this message contains a file attachment
prepared for transmission using the Internet MIME message format.
If you are using Pegasus Mail, or any another MIME-compliant system,
you should be able to save it or view it from within your mailer.
If you cannot, please ask your system administrator for assistance.
---- File information -----------
File: example.gid.zip
Date: 15 Apr 2004, 16:08
Size: 5460 bytes.
Type: ZIP-archive
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20040421/e3fca183/attachment.htm
quadrilateral and triangular meshes.
It's corrected for next beta 7.4.7b (not available now)
Thanks for your bug report
Enrique
----- Original Message -----
From: Andrea Calaon
To: gidlist at gatxan.cimne.upc.es
Sent: Thursday, April 15, 2004 5:20 PM
Subject: [GiDlist] Example for the
Dear GiD team,
I append a "example.gid.zip" file with the geometry and the condition "Contour_Line" applied.
NUMBER: 14 CONDITION: Contour_Line
CONDTYPE: over lines
CONDMESHTYPE: over face elements
QUESTION: ForSpectralElements
VALUE: 0
STATE: HIDDEN
END CONDITION
Every surface is a different material as you suggested me some time ago.
The command:
-np- WarnWinText [.central.s info conditions Contour_Line mesh]
gives a Tcl list with all quadratical elements, but without the triangular elements (with IDs from 21 to 28).
I need information on triangular elements as well.
Thanks for any suggestion.
Kind Regards
Andrea
Andrea Calaon
Ashurst Lodge, Ashurst
Southampton, Hampshire
SO40 7AA, UK
Tel. office: +44 23 80 293 223
Fax office: +44 23 80 292 853
Homepage: http://mailserver1.wessex.ac.uk/~acalaon
Mobile: +44 7766 488 225
------------------------------------------------------------------------------
The following section of this message contains a file attachment
prepared for transmission using the Internet MIME message format.
If you are using Pegasus Mail, or any another MIME-compliant system,
you should be able to save it or view it from within your mailer.
If you cannot, please ask your system administrator for assistance.
---- File information -----------
File: example.gid.zip
Date: 15 Apr 2004, 16:08
Size: 5460 bytes.
Type: ZIP-archive
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20040421/e3fca183/attachment.htm