[GiDlist] Preprocess Files

[dganit]

Hello everyone,

I want to open a pre-defined file in the preprocss, that already contains the "shape" information.
Is it possible, and if it is how can I do it ?

Thanks,
Dganit
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20040128/0c31d4dc/attachment.htm

[Enrique Escolano]

I don't understand your question.
If do you want to add a previous model to the current one, must use the menu: Files-Import-Insert GiD Geometry...

Regards
Enrique Escolano
----- Original Message -----
From: dganit
To: gidlist at gatxan.cimne.upc.es ; dganit at evs.co.il
Sent: Tuesday, January 27, 2004 7:25 PM
Subject: [GiDlist] Preprocess Files


Hello everyone,

I want to open a pre-defined file in the preprocss, that already contains the "shape" information.
Is it possible, and if it is how can I do it ?

Thanks,
Dganit
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20040128/e52e7c14/attachment.htm

[dganit]

I want to create the geometry outside GiD.
What should be the format of the file to be able to do so ?

Thanks,
Dganit
----- Original Message -----
From: Enrique Escolano
To: gidlist at gatxan.cimne.upc.es
Sent: Wednesday, January 28, 2004 1:29 PM
Subject: Re: [GiDlist] Preprocess Files


I don't understand your question.
If do you want to add a previous model to the current one, must use the menu: Files-Import-Insert GiD Geometry...

Regards
Enrique Escolano
----- Original Message -----
From: dganit
To: gidlist at gatxan.cimne.upc.es ; dganit at evs.co.il
Sent: Tuesday, January 27, 2004 7:25 PM
Subject: [GiDlist] Preprocess Files


Hello everyone,

I want to open a pre-defined file in the preprocss, that already contains the "shape" information.
Is it possible, and if it is how can I do it ?

Thanks,
Dganit
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20040129/902b0667/attachment.htm

[Enrique Escolano]

I attach a not oficial documentation, written in spanish, about the GiD *.geo ASCII format.

Regards

Enrique Escolano
----- Original Message -----
From: dganit
To: gidlist at gatxan.cimne.upc.es
Sent: Thursday, January 29, 2004 9:22 PM
Subject: Re: [GiDlist] Preprocess Files


I want to create the geometry outside GiD.
What should be the format of the file to be able to do so ?

Thanks,
Dganit
----- Original Message -----
From: Enrique Escolano
To: gidlist at gatxan.cimne.upc.es
Sent: Wednesday, January 28, 2004 1:29 PM
Subject: Re: [GiDlist] Preprocess Files


I don't understand your question.
If do you want to add a previous model to the current one, must use the menu: Files-Import-Insert GiD Geometry...

Regards
Enrique Escolano
----- Original Message -----
From: dganit
To: gidlist at gatxan.cimne.upc.es ; dganit at evs.co.il
Sent: Tuesday, January 27, 2004 7:25 PM
Subject: [GiDlist] Preprocess Files


Hello everyone,

I want to open a pre-defined file in the preprocss, that already contains the "shape" information.
Is it possible, and if it is how can I do it ?

Thanks,
Dganit
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20040130/6117f3dd/attachment.htm
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Formato gid 6.2b.pdf
Type: application/pdf
Size: 39203 bytes
Desc: not available
Url : http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20040130/6117f3dd/attachment.pdf

[Ramon Ribó]

Hello,

If you want to create geometry outside of GiD and import it in GiD,
you should
use one of the standard geometry interchange files that GiD supports,
These are
the following: DXF, IGES, PARASOLID, ACIS.

Regards,

--
Compass Ing. y Sistemas Dr. Ramon Ribo
http://www.compassis.com http://www.compassis.com/
ramsan at compassis.com
c/ Manuel Girona, 61 bajos tel. +34 93 204 10 82
08034 Barcelona, Spain fax. +34 93 204 19 09

-----Mensaje original-----
De: gidlist-admin at gatxan.cimne.upc.es
[mailto:gidlist-admin at gatxan.cimne.upc.es] En nombre de Enrique Escolano
Enviado el: viernes, 30 de enero de 2004 11:01
Para: gidlist at gatxan.cimne.upc.es
Asunto: Re: [GiDlist] Preprocess Files


I attach a not oficial documentation, written in spanish, about the GiD
*.geo ASCII format.

Regards

Enrique Escolano

----- Original Message -----
From: dganit mailto:dganit at hahotrim.com
To: gidlist at gatxan.cimne.upc.es
Sent: Thursday, January 29, 2004 9:22 PM
Subject: Re: [GiDlist] Preprocess Files

I want to create the geometry outside GiD.
What should be the format of the file to be able to do so ?

Thanks,
Dganit

----- Original Message -----
From: Enrique mailto:escolano at cimne.upc.es Escolano
To: gidlist at gatxan.cimne.upc.es
Sent: Wednesday, January 28, 2004 1:29 PM
Subject: Re: [GiDlist] Preprocess Files

I don't understand your question.
If do you want to add a previous model to the current one, must use the
menu: Files-Import-Insert GiD Geometry...

Regards
Enrique Escolano

----- Original Message -----
From: dganit mailto:dganit at hahotrim.com
To: gidlist at gatxan.cimne.upc.es ; dganit at evs.co.il
Sent: Tuesday, January 27, 2004 7:25 PM
Subject: [GiDlist] Preprocess Files

Hello everyone,

I want to open a pre-defined file in the preprocss, that already
contains the "shape" information.
Is it possible, and if it is how can I do it ?

Thanks,
Dganit

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20040130/1949d681/attachment.htm

[Khaled Obeidat]

Hello Gid Team,

I have indeed wrote my data on ASCII Techplot format for 3D structures but
GID keep crashing when I import the *.dat file for the first try, when I re
open GID and import the file, GID work.

Best Regards,

At 05:01 AM 1/30/2004, you wrote:
I attach a not oficial documentation, written in spanish, about the GiD
*.geo ASCII format.

Regards

Enrique Escolano
----- Original Message -----
From: mailto:dganit at hahotrim.comdganit
To: mailto:gidlist at gatxan.cimne.upc.esgidlist at gatxan.cimne.upc.es
Sent: Thursday, January 29, 2004 9:22 PM
Subject: Re: [GiDlist] Preprocess Files

I want to create the geometry outside GiD.
What should be the format of the file to be able to do so ?

Thanks,
Dganit
----- Original Message -----
From: mailto:escolano at cimne.upc.esEnrique Escolano
To: mailto:gidlist at gatxan.cimne.upc.esgidlist at gatxan.cimne.upc.es
Sent: Wednesday, January 28, 2004 1:29 PM
Subject: Re: [GiDlist] Preprocess Files

I don't understand your question.
If do you want to add a previous model to the current one, must use the
menu: Files-Import-Insert GiD Geometry...

Regards
Enrique Escolano
----- Original Message -----
From: mailto:dganit at hahotrim.comdganit
To: mailto:gidlist at gatxan.cimne.upc.esgidlist at gatxan.cimne.upc.es ;
mailto:dganit at evs.co.ildganit at evs.co.il
Sent: Tuesday, January 27, 2004 7:25 PM
Subject: [GiDlist] Preprocess Files

Hello everyone,

I want to open a pre-defined file in the preprocss, that already contains
the "shape" information.
Is it possible, and if it is how can I do it ?

Thanks,
Dganit


Khaled Obeidat
Research Engineer
EMAG Technologies, Inc.
www.emagtechnologies.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20040130/76df74b5/attachment.htm

[Enrique Escolano]

Please, send us this Tecplot sample file to check it.
(send directly to escolano at cimne.upc.es)

Enrique Escolano
----- Original Message -----
From: Khaled Obeidat
To: gidlist at gatxan.cimne.upc.es
Sent: Friday, January 30, 2004 4:00 PM
Subject: Re: [GiDlist] Preprocess Files


Hello Gid Team,

I have indeed wrote my data on ASCII Techplot format for 3D structures but GID keep crashing when I import the *.dat file for the first try, when I re open GID and import the file, GID work.

Best Regards,

At 05:01 AM 1/30/2004, you wrote:

I attach a not oficial documentation, written in spanish, about the GiD *.geo ASCII format.

Regards

Enrique Escolano

----- Original Message -----

From: dganit

To: gidlist at gatxan.cimne.upc.es

Sent: Thursday, January 29, 2004 9:22 PM

Subject: Re: [GiDlist] Preprocess Files


I want to create the geometry outside GiD.

What should be the format of the file to be able to do so ?



Thanks,

Dganit

----- Original Message -----

From: Enrique Escolano

To: gidlist at gatxan.cimne.upc.es

Sent: Wednesday, January 28, 2004 1:29 PM

Subject: Re: [GiDlist] Preprocess Files


I don't understand your question.

If do you want to add a previous model to the current one, must use the menu: Files-Import-Insert GiD Geometry...



Regards

Enrique Escolano

----- Original Message -----

From: dganit

To: gidlist at gatxan.cimne.upc.es ; dganit at evs.co.il

Sent: Tuesday, January 27, 2004 7:25 PM

Subject: [GiDlist] Preprocess Files


Hello everyone,



I want to open a pre-defined file in the preprocss, that already contains the "shape" information.

Is it possible, and if it is how can I do it ?



Thanks,

Dganit


Khaled Obeidat
Research Engineer
EMAG Technologies, Inc.
www.emagtechnologies.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20040130/f3fbb1b0/attachment.htm