Print to file SVG in mesh drawing corrupted

Moderator: GiD Team

Post Reply
Hemmi
Posts: 31
Joined: Fri Nov 20, 2015 6:05 am
Location: Chiba prefecture, Japan

Print to file SVG in mesh drawing corrupted

Post by Hemmi »

It seems that "Print to file" "SVG.." in mesh drawing corrupted.
Regards,
Attachments
test3d_mesh.jpg
test3d_mesh.jpg (74.17 KiB) Viewed 9277 times
User avatar
escolano
Posts: 1918
Joined: Sun Sep 05, 1982 10:51 pm

Re: Print to file SVG in mesh drawing corrupted

Post by escolano »

Please, attach a zip with the GiD model.
I have tried with a similar model, it is attached
test_svg.zip
(18.71 KiB) Downloaded 349 times
and it worked well
This is a screen capture opened with the InkScape editor
Attachments
gid_export_svg.png
gid_export_svg.png (48.56 KiB) Viewed 9269 times
Hemmi
Posts: 31
Joined: Fri Nov 20, 2015 6:05 am
Location: Chiba prefecture, Japan

Re: Print to file SVG in mesh drawing corrupted

Post by Hemmi »

Thanks for the reply.
I attached zip file; my testing model is in it.
Am testing it by GiD 15.0.3 (free version).
Regards,
Attachments
testingSVGexport.gid.zip
(25.79 KiB) Downloaded 342 times
User avatar
miguel
Posts: 361
Joined: Thu Sep 25, 2014 9:04 am

Re: Print to file SVG in mesh drawing corrupted

Post by miguel »

Hi Hemmi,
Are you using an AMD Radeon graphics card? Which graphics card are you using?
We found a similar problem with the drivers of AMD Radeon cards and are solving it.

Can you try the Preferences --> Graphical --> System --> 'Safe visualization mode' ?
and see if the SVG is exported correctly?
SafeVisualizationMode.png
SafeVisualizationMode.png (15.33 KiB) Viewed 9235 times
Can you send us your gid.ini file (located at c:\users\<YourUserName>\AppData\Roaming\GiD\15.0.3\gid.ini) ?

thanks,

gidteam
Hemmi
Posts: 31
Joined: Fri Nov 20, 2015 6:05 am
Location: Chiba prefecture, Japan

Re: Print to file SVG in mesh drawing corrupted

Post by Hemmi »

Thank you for the answer.

The graphics card of my laptop PC (Lenovo ideapad 330S-14IKB) is
Intel(R) UHD Graphics 620.

After changing to "Safe visualization mode", the correct figure is drawn; thus the problem solved.

The attached gid.ini file is the version after "Safe visualization mode" applied.

Regards,
Attachments
testingSVGexportMESHsafevisual.zip
(16.71 KiB) Downloaded 337 times
Post Reply