[GiDlist] structured mesh

Moderator: GiD Team

sylvain waré

[GiDlist] structured mesh

Postby sylvain waré » Tue Mar 25, 2008 5:22 pm

Hello, I want to know if it is possible to GID to do the following
actions: I want to make a structured mesh in my 3 volumes. It seems to
be possible in so far as I have 3 6-sides volumes. But, it works only
for the volumes 2 and 3 and not for the 1. I think it links to the fact
the lines of this volumes are in reality shared in 2 part, and it is an
issu. But, is there a function in order to avoid this matter. Thank you
for your help, regards.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.bmp
Type: image/bmp
Size: 401526 bytes
Desc: not available
Url : http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20080325/84a4440f/attachment.bin
User avatar
abelcs
Posts: 141
Joined: Mon Oct 13, 2014 9:14 am

[GiDlist] structured mesh

Postby abelcs » Tue Mar 25, 2008 5:44 pm

Hello,

The problem is that volume number 1 (in the picture you have sent) is not a
6-sided volume. It has 7 surfaces. To reach a structured mesh you have to
split this volume in a similar way as volumes 2 and 3 are.

Regards,

ABEL


_________________________________
Abel Coll Sans - Civil Engineer
CIMNE - International Center for Numerica Methods in Engineering
Ofice c-2, C1 building - Campus Nord UPC
Gran Capità s/n, 08034 Barcelona
T: 34 - 93 401 74 03 Fax: 34 - 93 40 65 17

-----Mensaje original-----
De: gidlist-admin at gid.cimne.upc.edu [mailto:gidlist-admin at gid.cimne.upc.edu]
En nombre de sylvain waré
Enviado el: martes, 25 de marzo de 2008 16:47
Para: GiDlist at gid.cimne.upc.edu
Asunto: [GiDlist] structured mesh

Hello, I want to know if it is possible to GID to do the following
actions: I want to make a structured mesh in my 3 volumes. It seems to be
possible in so far as I have 3 6-sides volumes. But, it works only for the
volumes 2 and 3 and not for the 1. I think it links to the fact the lines of
this volumes are in reality shared in 2 part, and it is an issu. But, is
there a function in order to avoid this matter. Thank you for your help,
regards.
sylvain waré

[GiDlist] structured mesh

Postby sylvain waré » Tue Mar 25, 2008 6:08 pm

Abel Coll a écrit :
Hello,

The problem is that volume number 1 (in the picture you have sent) is not a
6-sided volume. It has 7 surfaces. To reach a structured mesh you have to
split this volume in a similar way as volumes 2 and 3 are.

Regards,

ABEL


_________________________________
Abel Coll Sans - Civil Engineer
CIMNE - International Center for Numerica Methods in Engineering
Ofice c-2, C1 building - Campus Nord UPC
Gran Capità s/n, 08034 Barcelona
T: 34 - 93 401 74 03 Fax: 34 - 93 40 65 17

-----Mensaje original-----
De: gidlist-admin at gid.cimne.upc.edu [mailto:gidlist-admin at gid.cimne.upc.edu]
En nombre de sylvain waré
Enviado el: martes, 25 de marzo de 2008 16:47
Para: GiDlist at gid.cimne.upc.edu
Asunto: [GiDlist] structured mesh

Hello, I want to know if it is possible to GID to do the following
actions: I want to make a structured mesh in my 3 volumes. It seems to be
possible in so far as I have 3 6-sides volumes. But, it works only for the
volumes 2 and 3 and not for the 1. I think it links to the fact the lines of
this volumes are in reality shared in 2 part, and it is an issu. But, is
there a function in order to avoid this matter. Thank you for your help,
regards.

_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.edu
http://gid.cimne.upc.es/mailman/listinfo/gidlist


Thank you, it is what I fear, since I have in fact an volume more
complicated, I will owe to creta a plenty of volumes in order to stay in
6-sides elements. I hope only a solution exists to this kind of problem.
Regards

Return to “2013 - 2005”

Who is online

Users browsing this forum: No registered users and 11 guests