Dear Gid team,
thank you for the fast response, I would have one more question:
Is it possible to create objects (again 2D) with a line mesh on the boundary and on the surface. My problem is I can create either the line mesh or the surface mesh but not both of them on one object. (And if possible, can you do a different subdivision of the 2 meshes? For example a coarse suface mesh and a fine line mesh?)
best regards
Samir Omerovic
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20090709/d7060a28/attachment.htm
[GiDlist] problem with mashing
Moderator: GiD Team
[GiDlist] problem with mashing
Dear Samir,
To get the line mesh and the surface mesh, you have to set Mesh-Mesh
Criteria-Mesh-Lines and select the lines you want. The same happens if you
want to have a volume mesh and also the mesh of its boundary surfaces.
Doing this you will get both meshes, but they are conformal. If you want
diferent mesh sizes on lines and surfaces, you should duplicate the lines,
so as the duplicated line mesh will not own the surface one. In this case
both sizes are independent.
Kind regards,
ABEL
_________________________________
Abel Coll Sans - Civil Engineer
CIMNE - International Center for Numerical Methods in Engineering
Ofice c-2, C1 building - Campus Nord UPC
Gran Capità s/n, 08034 Barcelona
T: 34 - 93 401 74 03 Fax: 34 - 93 40 65 17
_____
AVISO IMPORTANTE
Los datos de carácter personal contenidos en el mensaje, se registrarán en
un fichero para facilitar la gestión de las comunicaciones de CIMNE. Se
pueden ejercitar los derechos de acceso, rectificación, cancelación y
oposición por escrito, dirigiéndose a nuestras oficinas de CIMNE, Gran
Capitán s/n, Edificio C1 - Campus Norte UPC, 08034 Barcelona, España.
AVÍS IMPORTANT
Les dades de caràcter personal contingudes en aquest missatge es registraran
en un fitxer per facilitar la gestió de les comunicacions del CIMNE. Es
poden exercir els drets d'accés, rectificació, cancel·lació i oposició, per
escrit a les nostres oficines del CIMNE, Gran Capità s/n, Edifici C1, Campus
Nord UPC, 08034 Barcelona, Espanya.
IMPORTANT NOTICE
All personal data contained in this mail will be processed confidentially
and stored in a file property of CIMNE in order to manage corporate
communications. You may exercise the right of access, rectification,
deletion and objection by letter sent to CIMNE, Gran Capitán, Edificio C1 -
Campus Norte UPC, 08034 Barcelona, Spain.
_____
_____
De: gidlist-admin at gatxan.cimne.upc.edu.gid.cimne.upc.edu
[mailto:gidlist-admin at gatxan.cimne.upc.edu.gid.cimne.upc.edu] En nombre de
Samir Omerovic
Enviado el: jueves, 09 de julio de 2009 9:35
Para: gidlist at gatxan.cimne.upc.edu
Asunto: [GiDlist] problem with mashing
Dear Gid team,
thank you for the fast response, I would have one more question:
Is it possible to create objects (again 2D) with a line mesh on the boundary
and on the surface. My problem is I can create either the line mesh or the
surface mesh but not both of them on one object. (And if possible, can you
do a different subdivision of the 2 meshes? For example a coarse suface mesh
and a fine line mesh?)
best regards
Samir Omerovic
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20090709/11d3f6ec/attachment.htm
To get the line mesh and the surface mesh, you have to set Mesh-Mesh
Criteria-Mesh-Lines and select the lines you want. The same happens if you
want to have a volume mesh and also the mesh of its boundary surfaces.
Doing this you will get both meshes, but they are conformal. If you want
diferent mesh sizes on lines and surfaces, you should duplicate the lines,
so as the duplicated line mesh will not own the surface one. In this case
both sizes are independent.
Kind regards,
ABEL
_________________________________
Abel Coll Sans - Civil Engineer
CIMNE - International Center for Numerical Methods in Engineering
Ofice c-2, C1 building - Campus Nord UPC
Gran Capità s/n, 08034 Barcelona
T: 34 - 93 401 74 03 Fax: 34 - 93 40 65 17
_____
AVISO IMPORTANTE
Los datos de carácter personal contenidos en el mensaje, se registrarán en
un fichero para facilitar la gestión de las comunicaciones de CIMNE. Se
pueden ejercitar los derechos de acceso, rectificación, cancelación y
oposición por escrito, dirigiéndose a nuestras oficinas de CIMNE, Gran
Capitán s/n, Edificio C1 - Campus Norte UPC, 08034 Barcelona, España.
AVÍS IMPORTANT
Les dades de caràcter personal contingudes en aquest missatge es registraran
en un fitxer per facilitar la gestió de les comunicacions del CIMNE. Es
poden exercir els drets d'accés, rectificació, cancel·lació i oposició, per
escrit a les nostres oficines del CIMNE, Gran Capità s/n, Edifici C1, Campus
Nord UPC, 08034 Barcelona, Espanya.
IMPORTANT NOTICE
All personal data contained in this mail will be processed confidentially
and stored in a file property of CIMNE in order to manage corporate
communications. You may exercise the right of access, rectification,
deletion and objection by letter sent to CIMNE, Gran Capitán, Edificio C1 -
Campus Norte UPC, 08034 Barcelona, Spain.
_____
_____
De: gidlist-admin at gatxan.cimne.upc.edu.gid.cimne.upc.edu
[mailto:gidlist-admin at gatxan.cimne.upc.edu.gid.cimne.upc.edu] En nombre de
Samir Omerovic
Enviado el: jueves, 09 de julio de 2009 9:35
Para: gidlist at gatxan.cimne.upc.edu
Asunto: [GiDlist] problem with mashing
Dear Gid team,
thank you for the fast response, I would have one more question:
Is it possible to create objects (again 2D) with a line mesh on the boundary
and on the surface. My problem is I can create either the line mesh or the
surface mesh but not both of them on one object. (And if possible, can you
do a different subdivision of the 2 meshes? For example a coarse suface mesh
and a fine line mesh?)
best regards
Samir Omerovic
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20090709/11d3f6ec/attachment.htm