Page 1 of 1

Posted: Sun Aug 18, 2013 1:43 am
Hello,

I have an L shaped slab that I try to mesh it with quadrilateral elements.
I have perfectly square elements of another element underneath it, and I
want to make my mesh matching each other. So, the L shaped 2d element needs
to be meshed with 2 ft by 2 ft square quadrilateral elements. When I mesh
it now, the elements turn to be curved. How can I have exactly square
elements on an L shape element which is not a rectangle but all lines are
parallel or perpendicular.

Thanks,
Arash
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20130817/df902503/attachment.htm

Posted: Mon Aug 19, 2013 8:19 am
Dear Arash,

I’m Abel Coll, from the GiD developer Team.

The solution may be to change some meshing properties, or maybe GiD is not
working properly. Please, could you send me the model in order to check it

Regards,

ABEL

_________________________________

Abel Coll Sans - Civil Engineer

CIMNE - International Center for Numerical Methods in Engineering

Ofice c-2, C1 building - Campus Nord UPC

Gran Capità s/n, 08034 Barcelona

T: 34 - 93 401 74 03 Fax: 34 - 93 40 65 17

_____

De: gidlist-bounces at listas.cimne.upc.edu
[mailto:gidlist-bounces at listas.cimne.upc.edu] En nombre de Farzam, Arash
Enviado el: domingo, 18 de agosto de 2013 2:43
Para: gidlist at listas.cimne.upc.edu

Hello,

I have an L shaped slab that I try to mesh it with quadrilateral elements. I
have perfectly square elements of another element underneath it, and I want
to make my mesh matching each other. So, the L shaped 2d element needs to be
meshed with 2 ft by 2 ft square quadrilateral elements. When I mesh it now,
the elements turn to be curved. How can I have exactly square elements on an
L shape element which is not a rectangle but all lines are parallel or
perpendicular.

Thanks,

Arash

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20130819/8e4dfb56/attachment.htm

### [GiDlist] Scripted geometry import

Posted: Mon Aug 19, 2013 2:57 pm
Dear GiD team,

I'm using GiD mesher/customization for my own FEM code. Former releases
of this code used their own preprocessor with a crappy 3D-block volume
geometry generator. It would be nice if GID could import those geometry
in a scriptig style (like GMSH does). I tried to do it via "Import GiD
mesh" and "Create Geometry from mesh" but this often fails on more
complex geometries.

--
Mit freundlichen Grüßen

Prof. Dr.-Ing. Lutz Nietner

Hochschule für Technik, Wirtschaft und Kultur Leipzig
LG Bausanierung / Baustoffe
Karl-Liebknecht-Strasse 132
04277 Leipzig

Phone: +49(0)341 3076 6313
Lutz.Nietner at fb.htwk-leipzig.de
www.htwk-leipzig.de

-------------- next part --------------
A non-text attachment was scrubbed...
Name: 0xA7AAE379.asc
Type: application/pgp-keys
Size: 4788 bytes
Desc: not available
Url : http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20130819/02d303ba/attachment.key

### [GiDlist] Scripted geometry import

Posted: Wed Aug 21, 2013 2:25 pm
You can write a script to read this kind of files with Tcl/Tk language,
You can see as example the .tcl files of the GiD folder
\plugins\Import\pre
Have a look to the subfolder of cases of STAR-CD, EMA3D or UNV that are
relatively simple.

to import the format thought the procedures defined in the .tcl file

You can see some information of GiD-Tcl special commands in GiD help -
Customization - Tcl/Tk extension
And there is a lot of documentation about standard Tcl/Tk scripting language
in Internet

Regards

Enrique Escolano

-----Mensaje original-----
De: gidlist-bounces at listas.cimne.upc.edu
[mailto:gidlist-bounces at listas.cimne.upc.edu] En nombre de Lutz Nietner
Enviado el: lunes, 19 de agosto de 2013 15:58
Para: gidlist at listas.cimne.upc.edu
Asunto: [GiDlist] Scripted geometry import

Dear GiD team,

I'm using GiD mesher/customization for my own FEM code. Former releases of
this code used their own preprocessor with a crappy 3D-block volume geometry
generator. It would be nice if GID could import those geometry in a scriptig
style (like GMSH does). I tried to do it via "Import GiD mesh" and "Create
Geometry from mesh" but this often fails on more complex geometries.