[GiDlist] 答复: GiDlist Digest, Vol 32, Issue 6

[刘力风]

Hi, Mr. Escolano,

Thank you for your answer.

But I am doing the same as you do, you can found the screenshot in
attachment, Press F5 and nothing happened. What's wrong? Is there any
relationship with Gid license? (I am still using the trial version which can
only support 1000 node mesh.)


Thanks,
Michael Liu

-----邮件原件-----
发件人: gidlist-bounces at listas.cimne.upc.edu [mailto:gidlist-bounces at listas.
cimne.upc.edu] 代表 gidlist-request at listas.cimne.upc.edu
发送时间: 2013年3月21日 19:00
收件人: gidlist at listas.cimne.upc.edu
主题: GiDlist Digest, Vol 32, Issue 6

Send GiDlist mailing list submissions to
gidlist at listas.cimne.upc.edu

To subscribe or unsubscribe via the World Wide Web, visit
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist
or, via email, send a message with subject or body 'help' to
gidlist-request at listas.cimne.upc.edu

You can reach the person managing the list at
gidlist-owner at listas.cimne.upc.edu

When replying, please edit your Subject line so it is more specific
than "Re: Contents of GiDlist digest..."


Today's Topics:

1. Why RamDebugger not works? (???)
2. Re: Why RamDebugger not works? (Enrique Escolano)


----------------------------------------------------------------------

Message: 1
Date: Thu, 21 Mar 2013 17:34:19 +0800
From: ??? liulifeng at ectec.asia
Subject: [GiDlist] Why RamDebugger not works?
To: gidlist at listas.cimne.upc.edu
Message-ID: 000601ce2617$463f9b40$d2bed1c0$@asia
Content-Type: text/plain; charset="gb2312"

Hello guys,

Gid have Ramdebugger which is said to be able to debugging TCL in Data?
Problem Type ?Debugger.

I tried to use RamDebugger per following course
http://www.gidhome.com/images/news/gidconf/2004/courses/09-Debugging%20tcl%2
0code.pdf

but nothing happened. The Debugger seems not work? Anybody know the reason.
How can I debug in RamDebugger? I am using Gid 10.0.9





Thanks,

Michael Liu

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20130321/fe4b9d17/
attachment-0001.htm

------------------------------

Message: 2
Date: Thu, 21 Mar 2013 11:31:21 +0100
From: "Enrique Escolano" escolano at cimne.upc.edu
Subject: Re: [GiDlist] Why RamDebugger not works?
To: gidlist at listas.cimne.upc.edu
Message-ID: 256EB3F4FA63425195957BEDD23BABF7 at mediador
Content-Type: text/plain; charset="gb2312"

You must open RamDebugger (e.g. press F12 in GiD or from the
Data-Problemtype-Debugger... menu)
then open the Tcl file you want to debug,
and then press F5 in RamDebugger to start debugging (and you can set
breakpoints F9 to stop the flow and see/change variables)

----- Original Message -----
From: ???
To: gidlist at listas.cimne.upc.edu
Sent: Thursday, March 21, 2013 10:34 AM
Subject: [GiDlist] Why RamDebugger not works?


Hello guys,

Gid have Ramdebugger which is said to be able to debugging TCL in
Data?Problem Type ?Debugger.

I tried to use RamDebugger per following course
http://www.gidhome.com/images/news/gidconf/2004/courses/09-Debugging%20tcl%2
0code.pdf

but nothing happened. The Debugger seems not work? Anybody know the
reason. How can I debug in RamDebugger? I am using Gid 10.0.9





Thanks,

Michael Liu



----------------------------------------------------------------------------
--


_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20130321/bd76c7cf/
attachment-0001.htm

------------------------------

_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist


End of GiDlist Digest, Vol 32, Issue 6
**************************************
-------------- next part --------------
A non-text attachment was scrubbed...
Name: ramdebugger.PNG
Type: image/png
Size: 41623 bytes
Desc: not available
Url : http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20130322/91a8605b/attachment-0001.png

[amelendo]

Hi Michael Liu,
It seams that Ramdebugger its already debugging Find on downright
corner (VCS:debug)
The problem its that you don't have any breakpoint.
Put a break point with F9 and one of the following options:
1) press again F5 to let ramdebugger read again and execute
the file
2) source the file (on GiD command line write "-np- source
{D:/GiD 10.0.9/test.tcl}")
3) if breakpoint its inside the proc HelloWorld, execute the
proc (on GiD command line write "-np- HelloWorld")

Regards,
Adrià



El 22/03/2013 11:40, 刘力风 escribió:
Hi, Mr. Escolano,

Thank you for your answer.

But I am doing the same as you do, you can found the screenshot in
attachment, Press F5 and nothing happened. What's wrong? Is there any
relationship with Gid license? (I am still using the trial version which can
only support 1000 node mesh.)


Thanks,
Michael Liu

-----邮件原件-----
发件人: gidlist-bounces at listas.cimne.upc.edu [mailto:gidlist-bounces at listas.
cimne.upc.edu] 代表 gidlist-request at listas.cimne.upc.edu
发送时间: 2013年3月21日 19:00
收件人: gidlist at listas.cimne.upc.edu
主题: GiDlist Digest, Vol 32, Issue 6

Send GiDlist mailing list submissions to
gidlist at listas.cimne.upc.edu

To subscribe or unsubscribe via the World Wide Web, visit
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist
or, via email, send a message with subject or body 'help' to
gidlist-request at listas.cimne.upc.edu

You can reach the person managing the list at
gidlist-owner at listas.cimne.upc.edu

When replying, please edit your Subject line so it is more specific
than "Re: Contents of GiDlist digest..."


Today's Topics:

1. Why RamDebugger not works? (???)
2. Re: Why RamDebugger not works? (Enrique Escolano)


----------------------------------------------------------------------

Message: 1
Date: Thu, 21 Mar 2013 17:34:19 +0800
From: ??? liulifeng at ectec.asia
Subject: [GiDlist] Why RamDebugger not works?
To: gidlist at listas.cimne.upc.edu
Message-ID: 000601ce2617$463f9b40$d2bed1c0$@asia
Content-Type: text/plain; charset="gb2312"

Hello guys,

Gid have Ramdebugger which is said to be able to debugging TCL in Data?
Problem Type ?Debugger.

I tried to use RamDebugger per following course
http://www.gidhome.com/images/news/gidconf/2004/courses/09-Debugging%20tcl%2
0code.pdf

but nothing happened. The Debugger seems not work? Anybody know the reason.
How can I debug in RamDebugger? I am using Gid 10.0.9





Thanks,

Michael Liu

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20130321/fe4b9d17/
attachment-0001.htm

------------------------------

Message: 2
Date: Thu, 21 Mar 2013 11:31:21 +0100
From: "Enrique Escolano" escolano at cimne.upc.edu
Subject: Re: [GiDlist] Why RamDebugger not works?
To: gidlist at listas.cimne.upc.edu
Message-ID: 256EB3F4FA63425195957BEDD23BABF7 at mediador
Content-Type: text/plain; charset="gb2312"

You must open RamDebugger (e.g. press F12 in GiD or from the
Data-Problemtype-Debugger... menu)
then open the Tcl file you want to debug,
and then press F5 in RamDebugger to start debugging (and you can set
breakpoints F9 to stop the flow and see/change variables)

----- Original Message -----
From: ???
To: gidlist at listas.cimne.upc.edu
Sent: Thursday, March 21, 2013 10:34 AM
Subject: [GiDlist] Why RamDebugger not works?


Hello guys,

Gid have Ramdebugger which is said to be able to debugging TCL in
Data?Problem Type ?Debugger.

I tried to use RamDebugger per following course
http://www.gidhome.com/images/news/gidconf/2004/courses/09-Debugging%20tcl%2
0code.pdf

but nothing happened. The Debugger seems not work? Anybody know the
reason. How can I debug in RamDebugger? I am using Gid 10.0.9





Thanks,

Michael Liu



----------------------------------------------------------------------------
--


_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20130321/bd76c7cf/
attachment-0001.htm

------------------------------

_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist


End of GiDlist Digest, Vol 32, Issue 6
**************************************


_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20130322/40eb8883/attachment.htm