[GiDlist] centered structured mesh

[Dau Nguyen Van]

Dear members,

I would like to make a simple centered structured mesh (see attachment) with center at (0,0) but Gid crashes.

Any help will be greatly appreciated,

NGDau




-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20100209/4e571234/attachment.htm
-------------- next part --------------
A non-text attachment was scrubbed...
Name: gid_mesh.gid.zip
Type: application/zip
Size: 4449 bytes
Desc: not available
Url : http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20100209/4e571234/attachment.zip

[abelcs]

Dear NGDau,

As you said, this is a irregular behaviour. We have fixed the bug, and it
will be available in the next beta version.

By the moment, you can avoid this bug by assigning by hand the number of
divisions manually to the contour lines of the surface, so as the number of
the divisions of all the lines is more than three times the number of radial
divisions of the surface (in your case 5).

Kind regards,


ABEL

_________________________________
Abel Coll Sans - Civil Engineer
CIMNE - International Center for Numerical Methods in Engineering
Ofice c-2, C1 building - Campus Nord UPC
Gran Capità s/n, 08034 Barcelona
T: 34 - 93 401 74 03 Fax: 34 - 93 40 65 17
_____



AVISO IMPORTANTE

Los datos de carácter personal contenidos en el mensaje, se registrarán en
un fichero para facilitar la gestión de las comunicaciones de CIMNE. Se
pueden ejercitar los derechos de acceso, rectificación, cancelación y
oposición por escrito, dirigiéndose a nuestras oficinas de CIMNE, Gran
Capitán s/n, Edificio C1 - Campus Norte UPC, 08034 Barcelona, España.

AVÍS IMPORTANT

Les dades de caràcter personal contingudes en aquest missatge es registraran
en un fitxer per facilitar la gestió de les comunicacions del CIMNE. Es
poden exercir els drets d'accés, rectificació, cancel·lació i oposició, per
escrit a les nostres oficines del CIMNE, Gran Capità s/n, Edifici C1, Campus
Nord UPC, 08034 Barcelona, Espanya.

IMPORTANT NOTICE

All personal data contained in this mail will be processed confidentially
and stored in a file property of CIMNE in order to manage corporate
communications. You may exercise the right of access, rectification,
deletion and objection by letter sent to CIMNE, Gran Capitán, Edificio C1 -
Campus Norte UPC, 08034 Barcelona, Spain.

_____





_____

De: gidlist-admin at gatxan.cimne.upc.edu
[mailto:gidlist-admin at gatxan.cimne.upc.edu] En nombre de Dau Nguyen Van
Enviado el: martes, 09 de febrero de 2010 17:20
Para: gidlist at gatxan.cimne.upc.edu
Asunto: [GiDlist] centered structured mesh


Dear members,

I would like to make a simple centered structured mesh (see attachment) with
center at (0,0) but Gid crashes.

Any help will be greatly appreciated,

NGDau


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20100209/866e1a18/attachment.htm

[Dau Nguyen Van]

Dear Abel,

Many thanks for your quick response.

Best regards,

NGDau

--- On Wed, 2/10/10, Abel Coll abelcs at cimne.upc.edu wrote:

From: Abel Coll abelcs at cimne.upc.edu
Subject: RE: [GiDlist] centered structured mesh
To: gidlist at gatxan.cimne.upc.edu
Date: Wednesday, February 10, 2010, 12:32 AM




Dear NGDau,

As you said, this is a irregular behaviour. We have fixed the bug,
and it will be available in the next beta version.

By the moment, you can avoid this bug by assigning by hand the number
of divisions manually to the contour lines of the surface, so as the number of
the divisions of all the lines is more than three times the number of radial
divisions of the surface (in your case 5).

Kind regards,


ABEL

_________________________________
Abel Coll
Sans - Civil Engineer
CIMNE
- International Center for Numerical Methods in Engineering
Ofice c-2, C1 building -
Campus Nord UPC
Gran Capità s/n, 08034
Barcelona
T: 34 - 93 401 74 03
Fax: 34 - 93 40 65 17





AVISO
IMPORTANTE

Los datos de carácter personal contenidos en el mensaje, se
registrarán en un fichero para facilitar la gestión de las
comunicaciones de CIMNE. Se pueden ejercitar los derechos de acceso,
rectificación, cancelación y oposición por escrito, dirigiéndose a nuestras
oficinas de CIMNE, Gran Capitán s/n,
Edificio C1 - Campus Norte UPC, 08034 Barcelona,
España.
AVÍS IMPORTANT
Les dades de caràcter personal contingudes en aquest
missatge es registraran en un fitxer per facilitar la gestió de les
comunicacions del CIMNE. Es poden exercir els drets d

' accés, rectificació, cancel·lació i oposició, per
escrit a les nostres oficines del CIMNE, Gran Capità s/n, Edifici C1, Campus
Nord UPC, 08034 Barcelona, Espanya.
IMPORTANT
NOTICE
All personal data contained in this mail will be
processed confidentially and stored in a file property of CIMNE in
order to manage corporate communications. You may exercise the right of
access, rectification, deletion and objection by letter sent to CIMNE, Gran
Capitán, Edificio C1 - Campus Norte UPC, 08034
Barcelona ,
Spain .







De: gidlist-admin at gatxan.cimne.upc.edu
[mailto:gidlist-admin at gatxan.cimne.upc.edu] En nombre de Dau Nguyen
Van
Enviado el: martes, 09 de febrero de 2010 17:20
Para:
gidlist at gatxan.cimne.upc.edu
Asunto: [GiDlist] centered structured
mesh






Dear members,

I would like to make a simple centered
structured mesh (see attachment) with center at (0,0) but Gid
crashes.

Any help will be greatly
appreciated,

NGDau





-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20100210/c21c02e8/attachment.htm

[Gerard Gorman]

Hi All

I am trying out the 9.0.2 on ubuntu karmic&lucid. The problem I have
encountered is that the drop down menu bar (the bar with help on the
right), and any widgets opened by it are *tiny*. Most words are
impossible to read in fact. Has anyone else encountered this problem
and/or knows the solution?

Cheers
Gerard

[Gerard Gorman]

I found the answer is to edit the file ~/.gidDefaults and change:
NormalFont Helvetica 10 normal roman
to
NormalFont Helvetica 20 normal roman

Cheers
Gerard

Gerard Gorman wrote:
Hi All

I am trying out the 9.0.2 on ubuntu karmic&lucid. The problem I have
encountered is that the drop down menu bar (the bar with help on the
right), and any widgets opened by it are *tiny*. Most words are
impossible to read in fact. Has anyone else encountered this problem
and/or knows the solution?

Cheers
Gerard
_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.edu
http://gid.cimne.upc.es/mailman/listinfo/gidlist

[Jose Munoz]

Dear GID team,

I am using a results file with multiple steps in it. In each step I am
writing different meshes and different results, in order to view the
results corresponding to an analysis with adaptive remeshing.

My question is the following: is it possible to animate only one of the
steps, using something like the static animation profile facility in the
animate window?

Many thanks,

Jose

[escolano]

Fonts can be graphically changed from the "Preferences-Fonts" Window
(Utilities-Preferences menu)

Enrique
----- Original Message -----
From: "Gerard Gorman" g.gorman at imperial.ac.uk
To: gidlist at gatxan.cimne.upc.edu
Sent: Thursday, February 11, 2010 9:49 AM
Subject: Re: [GiDlist] tiny menu bar


I found the answer is to edit the file ~/.gidDefaults and change:
NormalFont Helvetica 10 normal roman
to
NormalFont Helvetica 20 normal roman

Cheers
Gerard

Gerard Gorman wrote:
Hi All

I am trying out the 9.0.2 on ubuntu karmic&lucid. The problem I have
encountered is that the drop down menu bar (the bar with help on the
right), and any widgets opened by it are *tiny*. Most words are
impossible to read in fact. Has anyone else encountered this problem
and/or knows the solution?

Cheers
Gerard
_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.edu
http://gid.cimne.upc.es/mailman/listinfo/gidlist

_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.edu
http://gid.cimne.upc.es/mailman/listinfo/gidlist