[GiDlist] quadratic elements with straight edges

Moderator: GiD Team

Post Reply
zwozniak at cogeco.ca

[GiDlist] quadratic elements with straight edges

Post by zwozniak at cogeco.ca »

Hi All,
I have a 3D oval shaped model and I am using mesh with quadratic elements. For such a geometry GiD generates elements
with curved edges. How to generate mesh with quadratic elements having straight edges?
Regards,
Zdzislaw
User avatar
escolano
Posts: 1918
Joined: Sun Sep 05, 1982 10:51 pm

[GiDlist] quadratic elements with straight edges

Post by escolano »

This option not exists internally, but we provided a predefined macro that
do exactly this (move quadratic nodes to align them) from Tcl scripting.

You could enable this macro with: Utilities-Tools-Macros...
select the 'Align Quadratic Nodes' macro, press the 'right-mouse' button to
open the contextual menu and use 'In toolbar', then its icon will be shown
in the 'macros toolbar'.

Press this button and all quadratic nodes will be aligned.

Enrique Escolano

----- Original Message -----
From: zwozniak at cogeco.ca
To: gidlist at listas.cimne.upc.edu
Sent: Wednesday, November 02, 2011 2:23 PM
Subject: [GiDlist] quadratic elements with straight edges


Hi All,
I have a 3D oval shaped model and I am using mesh with quadratic elements.
For such a geometry GiD generates elements
with curved edges. How to generate mesh with quadratic elements having
straight edges?
Regards,
Zdzislaw
_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist
Farzam-Student,STW, Arash

[GiDlist] Showing Post Process Values in Labels on the conto

Post by Farzam-Student,STW, Arash »

Dear All,

I have the contour fill results of a mass in post processing part. I make
sections of that, and I want to label the values of the result at some
nodes on that section. Please let me know what command I should use. I use
View/ Label, but it gives the node numbers instead of the value.

Best Regards,
Arash Farzam
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20111102/f06dad72/attachment.htm
User avatar
escolano
Posts: 1918
Joined: Sun Sep 05, 1982 10:51 pm

[GiDlist] Showing Post Process Values in Labels on the conto

Post by escolano »

Draw some result, use:
View-Label-Select-Res
and the select the nodes where you want to see a label with its result

Enrique Escolano
----- Original Message -----
From: Farzam-Student,STW, Arash
To: gidlist at listas.cimne.upc.edu
Sent: Wednesday, November 02, 2011 7:04 PM
Subject: [GiDlist] Showing Post Process Values in Labels on the contour


Dear All,


I have the contour fill results of a mass in post processing part. I make sections of that, and I want to label the values of the result at some nodes on that section. Please let me know what command I should use. I use View/ Label, but it gives the node numbers instead of the value.


Best Regards,
Arash Farzam




------------------------------------------------------------------------------


_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20111102/bd565014/attachment.htm
User avatar
miguel
Posts: 361
Joined: Thu Sep 25, 2014 9:04 am

[GiDlist] Showing Post Process Values in Labels on the conto

Post by miguel »

Hello,

just after doing the contour fill of the result you want to see, right
clicking over the graphical window, select "Label--Select--.Res" and
select the nodes whose results you want to display. The label will display
the value of the result on that node.

If you the change the result used for the contour fill, the label will
change accordingly.

best reagrds,



Miguel Pasenau



De: gidlist-bounces at listas.cimne.upc.edu
[mailto:gidlist-bounces at listas.cimne.upc.edu] En nombre de
Farzam-Student,STW, Arash
Enviado el: miércoles, 02 de noviembre de 2011 19:04
Para: gidlist at listas.cimne.upc.edu
Asunto: [GiDlist] Showing Post Process Values in Labels on the contour



Dear All,



I have the contour fill results of a mass in post processing part. I make
sections of that, and I want to label the values of the result at some nodes
on that section. Please let me know what command I should use. I use View/
Label, but it gives the node numbers instead of the value.



Best Regards,

Arash Farzam



-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20111107/05283e78/attachment.htm
Post Reply