It seems that it not exists any element with this condition.
Are you sure that do you have some element have this Localaxes condition applied over them?
Use draw condition when visualizing the mesh.
After apply to geometric surfaces, must generate again the mesh to transfer to the elements.
What type of elements do you have: surface elements (triangles or quadrilaterals) or volume elements (tetrahedras, etc)?
In other hand, your "Localaxes" is only the name of a condition, but don't use the GiD local axes internal concept
(read help about #LA# fields).
Regards
Enrique Escolano
----- Original Message -----
From:
ascosta at portugalmail.pt
To:
gidlist at gid.cimne.upc.es
Sent: Thursday, November 24, 2005 12:00 AM
Subject: [GiDlist] Problem in .Bas file
Hi.
My .cnd file has
BOOK: Local Axes
NUMBER: 5 CONDITION: Localaxes
CONDTYPE: over surfaces
QUESTION: Rolling_direction_X
VALUE: 1.0
QUESTION: Rolling_direction_Y
VALUE: 0.0
QUESTION: Rolling_direction_Z
VALUE: 0.0
QUESTION: Transverse_direction_X
VALUE: 0.0
QUESTION: Transverse_direction_Y
VALUE: 1.0
QUESTION: Transverse_direction_Z
VALUE: 0.0
QUESTION: Normal_direction_X
VALUE: 0.0
QUESTION: Normal_direction_Y
VALUE: 0.0
QUESTION: Normal_direction_Z
VALUE: 1.0
END CONDITION
When, in bas file i call this values, like this:
**TESTE1
*set cond Localaxes *elems
*if(CondNumEntities(int)0)
*loop elems *OnlyInCond
*ElemsNum *cond(1)
*end
*endif
I don't have any result. Do you know why?
If i do this:
**TESTE1
*set cond Localaxes *elems
*loop elems
*ElemsNum *cond(1)
*end
I have this results:
*TESTE1
1 1.0
2 1.0
3 1.0
4 1.0
5 1.0
6 1.0
7 1.0
8 1.0
9 1.0
10 1.0
But i have assigned for cond(1) the value 2 !!
Thanks.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20051124/2f043d98/attachment.htm