[GiDlist] Structured Prisma
Posted: Wed Nov 02, 2005 12:06 pm
Dear Abel
I am using version 7.2
Prisma are listed under the Meshing-ElemType menu, so I figure there must be some functionality for them.
Cheers
Tim
-----Original Message-----
From: gidlist-admin at gatxan.cimne.upc.edu on behalf of Abel Coll
Sent: Wed 11/2/2005 8:26 AM
To: gidlist at gatxan.cimne.upc.edu
Subject: Re: [GiDlist] Structured Prisma
Structured Prisma
Hello, Tim,
Which GiD version are you using?
Abel Coll
----- Original Message -----
From: Kendon, Tim E
To: gidlist at gatxan.cimne.upc.es
Sent: Tuesday, November 01, 2005 3:36 PM
Subject: [GiDlist] Structured Prisma
Dear Gidlist
I am trying to mesh two volumes; one that is discretised using structured prisma; and one that is discretised using unstructured tetrahedral. These two volumes should be conforming
Two standard error messages within Gid are
1. "Non-structured volumes can only be tetrahedra or only points".
2. "Structured volumes can only be hexahedra"
How exactly can I use Prisma then? All my surfaces are Nurbs.
Apologies if this is a naive question.
Many thanks in advance
Tim Kendon
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/ms-tnef
Size: 2912 bytes
Desc: not available
Url : http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20051102/8d1bce5d/attachment.bin
I am using version 7.2
Prisma are listed under the Meshing-ElemType menu, so I figure there must be some functionality for them.
Cheers
Tim
-----Original Message-----
From: gidlist-admin at gatxan.cimne.upc.edu on behalf of Abel Coll
Sent: Wed 11/2/2005 8:26 AM
To: gidlist at gatxan.cimne.upc.edu
Subject: Re: [GiDlist] Structured Prisma
Structured Prisma
Hello, Tim,
Which GiD version are you using?
Abel Coll
----- Original Message -----
From: Kendon, Tim E
To: gidlist at gatxan.cimne.upc.es
Sent: Tuesday, November 01, 2005 3:36 PM
Subject: [GiDlist] Structured Prisma
Dear Gidlist
I am trying to mesh two volumes; one that is discretised using structured prisma; and one that is discretised using unstructured tetrahedral. These two volumes should be conforming
Two standard error messages within Gid are
1. "Non-structured volumes can only be tetrahedra or only points".
2. "Structured volumes can only be hexahedra"
How exactly can I use Prisma then? All my surfaces are Nurbs.
Apologies if this is a naive question.
Many thanks in advance
Tim Kendon
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/ms-tnef
Size: 2912 bytes
Desc: not available
Url : http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20051102/8d1bce5d/attachment.bin