Warning: This message has had one or more attachments removed.
Warning: Please read the "VirusWarning.txt" attachment(s) for more information.
Dear GiD-Users and Developers,
I have a problem with generating reinforced concrete members. I want
to define concrete volume elements with line elements for the steel
reinforcement. Both types of elements have to use the same nodes where
the reinforcement is located. I tried to solve the problem by defining
two exactly located lines, one to define surfaces/volumes for the
concrete elements and one for the line elements, but GiD meshes them
differently ...
This should be a common problem for everybody, who works in the field
of civil/structural engineering. I also could think of meshing in two
steps, first the reinforcement, then the volume by defining the nodes
of the line elements as fixed for the mesh ceneration of the volume
elements but GiD doesn't have this feature ... ? To demonstrate the
problem, I attached a model of a concrete slab with reinforcement ...
(it's just half of the model because it's symmetric)
Any suggestions? Thank you in advance.
Soeren Schwarz
___________________________________________________
Universität Leipzig
Wirtschaftswissenschaftliche Fakultät
Institut für Massivbau und Baustofftechnologie
Marschnerstrasse 31
04109 Leipzig
___________________________________________________
Dipl.-Ing. Sören Schwarz
Tel.: 0341/97-33800 (Sekretariat)
Tel.: 0341/97-33813 (Durchwahl)
Fax: 0341/97-33809
e-mail:
sschwarz at wifa.uni-leipzig.de
URL:
http://www.uni-leipzig.de/massivbau
___________________________________________________
-------------- next part --------------
A non-text attachment was scrubbed...
Name: concrete-slab.cnd
Type: application/octet-stream
Size: 1284 bytes
Desc: not available
Url :
http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20051012/b003ebc0/attachment.obj
-------------- next part --------------
A non-text attachment was scrubbed...
Name: concrete-slab.geo
Type: application/octet-stream
Size: 92338 bytes
Desc: not available
Url :
http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20051012/b003ebc0/attachment-0001.obj
-------------- next part --------------
A non-text attachment was scrubbed...
Name: concrete-slab.lin
Type: application/octet-stream
Size: 68 bytes
Desc: not available
Url :
http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20051012/b003ebc0/attachment-0002.obj
-------------- next part --------------
This is a message from the MailScanner E-Mail Virus Protection Service
----------------------------------------------------------------------
The original e-mail attachment "concrete-slab.mat"
is on the list of unacceptable attachments for this site and has been
replaced by this warning message.
If you wish to receive a copy of the original attachment, please
e-mail helpdesk and include the whole of this message
in your request. Alternatively, you can call them, with
the contents of this message to hand when you call.
At Wed Oct 12 12:13:13 2005 the virus scanner said:
Microsoft Access Shortcuts are dangerous in email in concrete-slab.mat
Note to Help Desk: Look on the MailScanner in /var/spool/mailscanner/quarantine (message j9CACokr006615).
--
Postmaster
-------------- next part --------------
A non-text attachment was scrubbed...
Name: concrete-slab.msh
Type: application/octet-stream
Size: 597968 bytes
Desc: not available
Url :
http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20051012/b003ebc0/attachment-0003.obj
-------------- next part --------------
A non-text attachment was scrubbed...
Name: concrete-slab.prb
Type: application/octet-stream
Size: 602 bytes
Desc: not available
Url :
http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20051012/b003ebc0/attachment-0004.obj
-------------- next part --------------
A non-text attachment was scrubbed...
Name: concrete-slab.rdr
Type: application/octet-stream
Size: 796 bytes
Desc: not available
Url :
http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20051012/b003ebc0/attachment-0005.obj