[GiDlist] Rounding an edge

Moderator: GiD Team

Post Reply
Mark Smith

[GiDlist] Rounding an edge

Post by Mark Smith »

Win 2000 SP4 GiD 7.5.8b

Is there a geometric procedure like "round" where one specifies a radius
then selects the edges of the solid you wish to modify to blend one surface
into another with the specified radius? or "chamfer/bevel" an edge at a
specified angle?

for lines there is the arc tangent command, but I can not see the 2D/3D
analogy.

regards
mark


The information contained in this e-mail message (and any attachment
transmitted herewith) is privileged and confidential and is intended for the
exclusive use of the addressee(s). If you are not an addressee, any
disclosure, reproduction, distribution or other dissemination or use of this
communication is strictly prohibited. If you have received this
communication in error, please contact us immediately so that we can correct
the error.
User avatar
abelcs
Posts: 146
Joined: Mon Oct 13, 2014 9:14 am

[GiDlist] Rounding an edge

Post by abelcs »

Hi,

You have this option in the RightButtons menu. Yo acces to it by
Geometry-Create-BlendSurfs. You must specify the radius of the "arc
surface" and the edge you want to "chamfer" (it must be shared by 2
surfaces). This command isn't still working 100% well, so it is in the
RightButtons menu. Probably in the next beta version it will be checked and
placed in normal menus.


ABEL




----- Original Message -----
From: "Mark Smith" mark.smith at linx.co.uk
To: "Gidlist (E-mail)" gidlist at gatxan.cimne.upc.es
Sent: Tuesday, August 02, 2005 1:10 PM
Subject: [GiDlist] Rounding an edge


Win 2000 SP4 GiD 7.5.8b

Is there a geometric procedure like "round" where one specifies a radius
then selects the edges of the solid you wish to modify to blend one
surface
into another with the specified radius? or "chamfer/bevel" an edge at a
specified angle?

for lines there is the arc tangent command, but I can not see the 2D/3D
analogy.

regards
mark


The information contained in this e-mail message (and any attachment
transmitted herewith) is privileged and confidential and is intended for
the
exclusive use of the addressee(s). If you are not an addressee, any
disclosure, reproduction, distribution or other dissemination or use of
this
communication is strictly prohibited. If you have received this
communication in error, please contact us immediately so that we can
correct
the error.
_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist

Post Reply