[GiDlist] opensees gid

Moderator: GiD Team

User avatar
abelcs
Posts: 146
Joined: Mon Oct 13, 2014 9:14 am

[GiDlist] RE: [GiDlist] [Problem] couldn´t map this poi

Post by abelcs »

Hello Martin,

We have detected a bug in the internal definition of the surface inside GiD,
but we need to create the surface following the same steps as you to be able
to correct it. Please, could you send us the initial mesh from which you
have created the SurfMesh?

Regards,

ABEL

__________________________________________________________

Abel Coll Sans

CIMNE - International Center for Numerical Methods in Engineering

Office C2 - C1Building - Campus Nord UPC

Gran Capità s/n, 08034 Barcelona

Tfn: 34 - 93 401 74 03 Fax: 34 - 93 401 65 17

abelcs at cimne.upc.edu

_________________________________________________________

-----Mensaje original-----
De: gidlist-admin at gatxan.cimne.upc.edu
[mailto:gidlist-admin at gatxan.cimne.upc.edu] En nombre de MArtin Koske
Enviado el: viernes, 17 de noviembre de 2006 15:21
Para: gidlist at gatxan.cimne.upc.es
Asunto: [GiDlist] [Problem] couldn´t map this point

Hi,

i try to make some mesh for ELMER and your programm worked very well. I need
the
mesh for some blood simulations that i do in a projekt in my univesity.

but now i have a problem i never had before.
By pressing the button "generate mesh" i get the message

Couldn´t map this point
????

What can i do that it will work?

i send a picture of my monitor and the problem file and hope you can help
me!


regards martin
MArtin Koske

[GiDlist] RE: [GiDlist] [Problem] couldn´t map this poi

Post by MArtin Koske »

hello Abel,

this is the original mesh.
it is an .stl file.

i converted it with

create - surface mesh
create - Volume - By contour

Regards Martin
-------------- next part --------------
A non-text attachment was scrubbed...
Name: first9.rar
Type: application/octet-stream
Size: 226647 bytes
Desc: not available
Url : http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20061121/8892d9d2/attachment.obj
User avatar
abelcs
Posts: 146
Joined: Mon Oct 13, 2014 9:14 am

[GiDlist] RE: [GiDlist] [Problem] couldn´t map this poi

Post by abelcs »

Hi Martin,

Finally we have found the bug and we have fixed it. Next beta and official
versions won't have this problem no more.

Thank you so much for notifying us this irregular behaviour.

Regards,

ABEL

P.D: I have corrected the GiD model you sent, and GiD is able to mesh all
its surfaces. If you want it, just send me an e-mail and I will send it to
you.

__________________________________________________________

Abel Coll Sans

CIMNE - International Center for Numerical Methods in Engineering

Office C2 - C1Building - Campus Nord UPC

Gran Capità s/n, 08034 Barcelona

Tfn: 34 - 93 401 74 03 Fax: 34 - 93 401 65 17

abelcs at cimne.upc.edu

_________________________________________________________

-----Mensaje original-----
De: gidlist-admin at gatxan.cimne.upc.edu
[mailto:gidlist-admin at gatxan.cimne.upc.edu] En nombre de MArtin Koske
Enviado el: martes, 21 de noviembre de 2006 12:54
Para: gidlist at gatxan.cimne.upc.edu
Asunto: Re: [GiDlist] RE: [GiDlist] [Problem] couldn´t map this point

hello Abel,

this is the original mesh.
it is an .stl file.

i converted it with

create - surface mesh
create - Volume - By contour

Regards Martin
MArtin Koske

[GiDlist] RE: [GiDlist] [Problem] couldn´t map this poi

Post by MArtin Koske »

Hi Abel,

can you send me this corrected gid model.
thanks for reparing it.

regards Martin




Zitat von Abel Coll abelcs at cimne.upc.edu:

Hi Martin,

Finally we have found the bug and we have fixed it. Next beta and official
versions won't have this problem no more.

Thank you so much for notifying us this irregular behaviour.

Regards,

ABEL

P.D: I have corrected the GiD model you sent, and GiD is able to mesh all
its surfaces. If you want it, just send me an e-mail and I will send it to
you.

__________________________________________________________

Abel Coll Sans

CIMNE - International Center for Numerical Methods in Engineering

Office C2 - C1Building - Campus Nord UPC

Gran Capità s/n, 08034 Barcelona

Tfn: 34 - 93 401 74 03 Fax: 34 - 93 401 65 17

abelcs at cimne.upc.edu

_________________________________________________________

-----Mensaje original-----
De: gidlist-admin at gatxan.cimne.upc.edu
[mailto:gidlist-admin at gatxan.cimne.upc.edu] En nombre de MArtin Koske
Enviado el: martes, 21 de noviembre de 2006 12:54
Para: gidlist at gatxan.cimne.upc.edu
Asunto: Re: [GiDlist] RE: [GiDlist] [Problem] couldn´t map this point

hello Abel,

this is the original mesh.
it is an .stl file.

i converted it with

create - surface mesh
create - Volume - By contour

Regards Martin


_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist



--
User avatar
abelcs
Posts: 146
Joined: Mon Oct 13, 2014 9:14 am

[GiDlist] RE: [GiDlist] [Problem] couldn´t map this poi

Post by abelcs »

Here you are.

ABEL

__________________________________________________________

Abel Coll Sans

CIMNE - International Center for Numerical Methods in Engineering

Office C2 - C1Building - Campus Nord UPC

Gran Capità s/n, 08034 Barcelona

Tfn: 34 - 93 401 74 03 Fax: 34 - 93 401 65 17

abelcs at cimne.upc.edu

_________________________________________________________

-----Mensaje original-----
De: gidlist-admin at gatxan.cimne.upc.edu
[mailto:gidlist-admin at gatxan.cimne.upc.edu] En nombre de MArtin Koske
Enviado el: martes, 28 de noviembre de 2006 15:17
Para: gidlist at gatxan.cimne.upc.edu
Asunto: Re: [GiDlist] RE: [GiDlist] [Problem] couldn´t map this point

Hi Abel,

can you send me this corrected gid model.
thanks for reparing it.

regards Martin




Zitat von Abel Coll abelcs at cimne.upc.edu:

Hi Martin,

Finally we have found the bug and we have fixed it. Next beta and official
versions won't have this problem no more.

Thank you so much for notifying us this irregular behaviour.

Regards,

ABEL

P.D: I have corrected the GiD model you sent, and GiD is able to mesh all
its surfaces. If you want it, just send me an e-mail and I will send it to
you.

__________________________________________________________

Abel Coll Sans

CIMNE - International Center for Numerical Methods in Engineering

Office C2 - C1Building - Campus Nord UPC

Gran Capità s/n, 08034 Barcelona

Tfn: 34 - 93 401 74 03 Fax: 34 - 93 401 65 17

abelcs at cimne.upc.edu

_________________________________________________________

-----Mensaje original-----
De: gidlist-admin at gatxan.cimne.upc.edu
[mailto:gidlist-admin at gatxan.cimne.upc.edu] En nombre de MArtin Koske
Enviado el: martes, 21 de noviembre de 2006 12:54
Para: gidlist at gatxan.cimne.upc.edu
Asunto: Re: [GiDlist] RE: [GiDlist] [Problem] couldn´t map this point

hello Abel,

this is the original mesh.
it is an .stl file.

i converted it with

create - surface mesh
create - Volume - By contour

Regards Martin


_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist



--

_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist
-------------- next part --------------
A non-text attachment was scrubbed...
Name: surfmesh_abel.gid.zip
Type: application/octet-stream
Size: 433979 bytes
Desc: not available
Url : http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20061128/7a01dbca/attachment.obj
Post Reply