Other Events

GiD team will be present in the PARTICLES 2019

particles2019

The VI International Conference on Particle-Based Methods (PARTICLES 2019), will take place in Barcelona, Spain, from 28th to 30th October 2019.

GiD team will join the conference so the atendees will be able to know all the GiD updates from the hand of the GiD developers in our exhibitor booth. Feel free to ask your questions and give us your feedback.

Stay tunned to our social media to get the latest updates from the congress.

The conference

bcn

The conference will take place at the Technical University of Catalonia (UPC), Vertex Building, Plaza Eusebi G√ľell 6, 08034 Barcelona, Spain.

PARTICLES 2019 will address both the fundamental basis and the applicability of state-of-the-art particle-based computational methods that can be effectively used for solving a variety of problems in engineering and applied sciences.

The denotation “Particle-Based Methods” basically stands for two different computational models in solid and fluid mechanics.

Find more information in the official website congress.cimne.com/particles2019.

GiD team will be present in the FORM and FORCE 2019

The FORM and FORCE 2019 conference, will take place in Barcelona, Spain, from 7th to 10th October 2019.

The conference incorporates the IASS 60th Anniversary Symposium (IASS SYMPOSIUM 2019) and the 9th International Conference on Textile Composites and Inflatable Structures (STRUCTURAL MEMBRANES 2019).

GiD team will be present in the conference with our exhibitor booth. The atendees will be able to speak directly with the GiD developers, asking for questions, discussing about the latests GiD news and giving us feedback.

The conference

form

Following the customary celebration of the IASS Symposium every ten years in Spain and the Structural Membranes Conference every four years in Barcelona, the organizers have found an outstanding opportunity to merge both communities into a joint international conference that aims to provide a forum for state-of-the-art contributions and fruitful discussion in the broad fields of shell, spatial, tension and inflatable structures.

The¬†conference will be held at the¬†Crowne Plaza,¬†a modern hotel in downtown Barcelona with very good connections to the airport and the city center. It is located in the heart of Montju√Įc.

Find more information in the official website congress.cimne.com/Formandforce2019.

GiD team will be present in the COMPLAS 2019

complas19

The XV International Conference on Computational Plasticity (COMPLAS 2019), will take place in Barcelona, Spain, from 3rd to 5th September 2019.

GiD team will join the conference with our exhibitor booth where you will be able to speak directly with the developers. Do not hesitate to ask your questions and discuss about the latests GiD news.

The conference

montjuic

The¬†conference will be held at the¬†Crowne Plaza,¬†a modern hotel in downtown Barcelona with very good connections to the airport and the city center. It is located in the heart of Montju√Įc.

The first fourteen conferences in the series were technically and academically successful and these meetings have become established events in the field of computational plasticity. We intend to make of COMPLAS 2019 a step forward in the history of the COMPLAS conferences.

COMPLAS 2019 is one of the Thematic Conferences of the European Community on Computational Methods in Applied Sciences (ECCOMAS). It is also an International Association for Computational Mechanics (IACM) Special Interest Conference.

Find more information in the official website congress.cimne.com/complas2019.

GiD team will be present in the COUPLED 2019

coupled2019

GiD team will be present in the 8th edition of the International Conference on Computational Methods for Coupled Problems in Science and Engineering (COUPLED PROBLEMS 2019).

The congress atendees will be able to know all the news from GiD v14 from the hand of the GiD developers in our exhibitor booth. Feel free to ask your questions and give us your feedback.

Stay tunned to our social media to get the latest updates from the congress.

The congress

sitges

The COUPLED PROBLEMS 2019 congress will be held on 3-5 June 2019 in Sitges, a beautiful village located in the southern Mediterranean coast of Barcelona in Spain.

The objectives of the congress are to present and discuss state of the art, mathematical models, numerical methods and computational techniques for solving coupling problems of multidisciplinary character in science and engineering. The conference goal is to make step forward in the formulation and solution of real life problems with a multidisciplinary vision, accounting for all the complex couplings involved in the physical description of the problem.

The conference is one of the Thematic Conferences of the European Community on Computational Methods in Applied Sciences (ECCOMAS) and a Special Interest Conference of the International Association for Computational Mechanics (IACM). It is also supported by other scientific organizations in Europe and worldwide.

Please find all the information in the official congress website.

11th Short course on CODE_BRIGHT

Code_bright

The 11th short course on CODE_BRIGHT will take place from 5th to 7th June 2019.

The course will be held at the Department of Civil and Environmental Engineering, located in the Polytechnic University of Catalonia (UPC).

CODE_BRIGHT is a general-purpose code for the 3-D analysis of coupled thermo-hydro-mechanical (THM) phenomena in geological media. Application fields cover geoenvironmental engineering and geotechnical engineering.
CODE_BRIGHT uses GiD as a pre and post processor.

The three days course will permit the participants to learn how works CODE_BRIGHT, from the fundamentals to solving advanced problems.

Participants are encouraged to bring their personal computers to be used during tutorial sessions. It is strongly recommended to use a Windows 64-bit operating system.

Register and find all the information and the detailed agenda in the official website of the course.

Next CODE_BRIGHT users workshop will take place on May 16th 2019

Code_bright

The next workshop for CODE_BRIGHT users will be held on May 16th 2019 at the Technical University of Catalonia (UPC) Campus Nord, building D2.

The event is organized by the Department of Civil and Environmental Engineering of the UPC.

CODE_BRIGHT is a general-purpose code for the 3-D analysis of coupled thermo-hydro-mechanical (THM) phenomena in geological media. Application fields cover geoenvironmental engineering and geotechnical engineering.
CODE_BRIGHT uses GiD as a pre and post processor.

The workshop aims to bring together scientists and engineers with different backgrounds for one day of interaction to share experiences and promote joint initiatives.

Call for contributions to the workshop is now open until 30th April.

Find all the details in the official website of the workshop.

V Kratos Workshop in TUM

cabecera-kratos

The fifth edition of the Kratos Multiphysics Workshop will take place at the Technical University of Munich (TUM) from the 25th to the 27th of March 2019.  The Kratos Workshop is the main meeting of users and developers of the Kratos Multiphysics open-source framework. Its goal is to bring together developers, industrial users and researchers to present new features in the code and discuss new and potential applications.

During three days several presentations and discussion roundables will take place. As well as a hands-on Kratos Course. Participants are asked to bring their own laptop. The course will assume a basic level of knowledge of the Python language.

Find the detailed agenda and more information in the TUM official website: https://www.st.bgu.tum.de/en/software/research/kratos-multiphysics/kratos-workshop-2019/

The 2nd International Conference on the MPM has been announced

logo_mpm[1]The 2nd International Conference on the Material Point Method for Modeling Soil-Water-Structure Interaction, organized by the Anura3D MPM Research Community, will take place on 8-10 January 2019 at University of Cambridge (UK).

The conference will be accompanied by the release of Anura3D v2019.1 MPM software and followed by an Anura3D training course on 11 January 2019.

Find all the detailed information in the official website mpm2019.eu.

GiD team will be present in the WCCM 2018

ny

From 22th to 27th July the World Congress on Computational Mechanics (WCCM) will take place in New York, USA.

The 13th World Congress in Computational Mechanics is expected to be one of the largest Computational Mechanics gatherings in the United States, with an expected participation from all parts of the globe, representing multiple sectors, including academia, government and industry.

GiD team will be present in the congress with a exhibitor booth. Visit us and you will be able to know all the news from GiD v14 from the hand of the GiD developers.  Feel free to ask your questions and give us your feedback.

Find more information about the WCCM in wccm2018.org.

See you in NY!

GiD present in the ECCM-ECFD 2018

cabecera

From 11th to 15th June the 6th European Conference on Computational Mechanics and the 7th European Conference on Computational Fluid Dynamics will take place in Glasgow, Scotland.

The congresses will take place coinciding with 25th anniversary of ECCOMAS (European Congress on Computational Methods in Applied Sciences an Engineering),

All the attendees will find the new GiD brochure inside the congress bags, presenting the new GiD version 14.

If you are attending the congress and you have any question regarding new GiD v14 just let us know in our social media!

For further information please visit www.eccm-ecfd2018.org.