Modules Commercial

DaGGer (Dam Geometric GenERator) is a GiD-based interactive tool for automatic predimensioning and numerical modeling of double-curvature arch dams. The software was developed to achieve a complete definition of the dam and the supporting ground, even considering elements such as outlets, abutment walls, spillways, excavation shape and rock strata. This tool allows comparing several solutions during preliminary studies in an easy way, in order to obtain the optimum solution, regarding to minimize concrete and excavation volumes. Moreover there is an option to export the fitted geometry to other environments to carry out structural numerical simulations.

Research paper:

2017. J. Vicente, J. San Mauro, F. Salazar, and C. M. Baena, “An Interactive Tool for Automatic Predimensioning and Numerical Modeling of Arch Dams,” Mathematical Problems in Engineering, vol. 2017, Article ID 9856938, 12 pages, 2017. https://doi.org/10.1155/2017/9856938

To get more information about DGG, please contact CIMNE Madrid

SpreadDEM is the first industrial numerical tool to perform virtual experiments of centrifugal fertilizer spreaders oriented to designers and producers of agricultural machinery.

Based on DEMPack technology, a Discrete Element Method (DEM) software for bulk material simulation, the trajectory of every single fertilizer particle is evaluated from the hopper to their contact with the ground.

SpreadDEM provides a complete and practical solution to optimize the design of the spreading machinery becoming an alternative to trial-and-error experimental testing. Thanks to its easy-to-use interface, users are able to simulate in a few intuitive steps and with minimal training the most significant results for the fertilizer spreading.

SpreadDEM has been developed in CIMNE by the DEMPack team.

Can be purchased in the GiD shop as a local or USB licence.

Find more information in www.cimne.com/spreaddem

ATENA is software for analysis of concrete and reinforced concrete structures.
ATENA simulates real behavior of concrete and reinforced concrete structures including concrete cracking, crushing and reinforcement yielding.
Gives engineers the power to check and verify their concrete stuctures in a user friendly and unique graphical enviroment.
To get more information about ATENA, please go to www.cervenka.cz.

ATILA is a finite element software package for the analysis of 2D & 3D structures based on smart materials. ATILA’s comprehensive element library include formulations for the following materials: elastic, composite, piezoelectric, electrostrictive, magnetostrictive, shape-memory alloys, and fluids. ATILA’s applications include: sonars and sonar arrays, piezoelectric actuators, ultrasonic devices, piezoelectric motors, piezoelectric transformers, magnetostrictive transducers, sensors, and more.

To get more information about ATILA, please go to www.mmech.com.

Ram Series is a three-dimensional structural analysis environment for calculations of solids, beams and shells using the Finite Element Method.
The EVALUATION version is limited to 10-300-500 nodes depending on the analysis.
Manuals are in English and Spanish.
To get more information about RamSeries, please go to www.compassis.com, or send a mail to info@compassis.com.

Tdyn is an environment for computational fluid-dynamics (CFD), multi-physics simulation, and fluid-structure interaction calculations, based on the leading stabilized finite element method (FIC-FEM).

The EVALUATION version is limited to 7,500 nodes.
Manuals are in English.
To get more information about Tdyn, please go to www.compassis.com, or send a mail to info@compassis.com.

 

Click2Cast is a casting process simulation software developed under an innovative user experience allowing the complete simulation to be done in 5 simple steps and through a completely new and user-friendly interface that allows the user to enhance and optimize their manufactured components avoiding typical casting defects such as air entrapment, porosity, cold shots, etc. thanks to the simple and quick mold filling simulation. This is EASYmulation.
To get more information about Click2Cast, please go to www.solidthinking.com/click2cast_land.html.

Stampack is the metal forming simulation software for many industrial applications such as ironing, necking, embossing, stretch-forming, forming of thick sheets, flex-forming, hydro-forming of multi chamber profiles, stretch-bending of profiles, etc.
To get more information about Stampack, please visit the Men at Work website www.maw-cax.de, or send a mail to stampack-service@maw-cax.de.

Hobbies (Higher Order Basis Based Integral Equation Solver) is electromagnetic software based on the Method of Moments (MoM). It has been designed in a high-performance parallel way.
To get more information about Hobbies, please go to www.em-hobbies.com.