Support Mailing list GiDList year 2009
| GidList 2009 |
|
Mailing list Archive year 2009
[GiDlist] RE: About rendering in "new" linux platforms
Send by: Nunzio Losacco Hello, I just want to point out that I am having the same problem with NVIDIA drivers ver. 180.22 on CentOS 5.2 64bit kernel 2.6.18-128.el5 Thanks, Nunzio Losacco. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20090114/7e23e8de/attachment.htm [GiDlist] error while calculating
Send by: sohel sher
Dear Gid Experts,
I found this error message while calculating with the problem type lambdaxnew.
Error: could not open "C:Gidwinproblemtypeslambdaxnew.gidlambdaxnew.bat": no such file or directory.
Note that i did the same calculation a few days back without changing anything and it did not show any error message that time.
Could anybody please suggest me how to fix the problem.Thank you.
sohel
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20090116/8def863d/attachment.htm...
[GiDlist] error while calculating
Send by: Enrique Escolano Have you checked if this file really exists? ----- Original Message ----- From: sohel sher To: gidlist at gid.cimne.upc.edu Sent: Friday, January 16, 2009 12:07 PM Subject: [GiDlist] error while calculating Dear Gid Experts, I found this error message while calculating with the problem type lambdaxnew. Error: could not open "C:Gidwinproblemtypeslambdaxnew.gidlambdaxnew.bat": no such file or directory. Note that i did the same calculation a few days back without changing anything and it did not show any error message that time. Could anybody please suggest me how to fix the problem.Thank you. sohel -------------- next part -------------- An HTML attachment was scrubbed... URL: ... [GiDlist] error while calculating
Send by: sohel sher thanks.i have checked the directory and found the file extension lambdaxnew.BAS. There is no BAT file. The thing is that the file and the directory remained same when i did the same calculation few days back and i wonder why it shows such error this time.Is there any other alternative to download only the BAT file of lambdaxnew?Thank you. sohel -------------------------------------------------------------- Md. Sohel Mahmud Sher Doctoral Student Division of Innovative technologies of ICT and robotics Department of Telecommunications(optical networks and photonic technologies) Sant Anna School of Advanced Studies Piazza Martiri della Liberta,33 - 56127 Pisa, Italy Mobile:(+39)3284862691 Home:(+39)0509911925 Fax:(+39)050882194 e-mail:... [GiDlist] error while calculating
Send by: Enrique Escolano Sorry, I don't know nothing about this lambdaxnew module, you must ask to its developers how to download it. Maybe you have calculated with another version or copy of GiD and lamddaxnew. Check if do you have more installed GiDs ----- Original Message ----- From: sohel sher To: gidlist at gid.cimne.upc.edu Sent: Friday, January 16, 2009 8:16 PM Subject: Re: [GiDlist] error while calculating thanks.i have checked the directory and found the file extension lambdaxnew.BAS. There is no BAT file. The thing is that the file and the directory remained same when i did the same calculation few days back and i wonder why it shows such error this time.Is there any other alternative to download only the BAT file of lambdaxnew?Thank you. sohel -------------------------------------------------------------- Md. Sohel Mahmud Sher Doctoral Student Division of Innovative technologies of ICT and robotics Department of Telecommunications(optical networks and photonic technologies) Sant Anna School of Advanced Studies Piazza Martiri della Liberta,33 - 56127 Pisa, Italy Mobile:(+39)3284862691 Home:(+39)0509911925 Fax:(+39)050882194 e-mail:... [GiDlist] GID icon in EPS files
Send by: Jose Munoz Dear GID team, Is there an option to remove the GID icon when printing to a vectorial EPS file? Many thanks, Jose Munoz -- Jose J Munoz, http://www-lacan.upc.es/munoz/ Laboratori de Càlcul Numèric (LaCàN) Dep. Matemàtica Aplicada III Universitat Politècnica de Catalunya (UPC) Jordi Girona 1-3 E-08034 Barcelona, Spain j.munoz at upc.edu, Tel. + 34 93 401 7760 [GiDlist] GID icon in EPS files
Send by: Enrique Escolano You can use this command (write it in the lower command line) Mescape View Hardcopy Options PrintLogo No And then print your images Enrique ----- Original Message ----- From: "Jose Munoz" <j.munoz at upc.edu> To: <gidlist at gid.cimne.upc.edu> Sent: Wednesday, January 21, 2009 2:04 PM Subject: [GiDlist] GID icon in EPS files > Dear GID team, > > Is there an option to remove the GID icon when printing to a vectorial > EPS file? > ... [GiDlist] GID icon in EPS files
Send by: Jose Munoz Dear GID time I have another doubt: can I also print postscript files that do not contain the green icon with the axes? Thanks again, Jose Munoz Another Enrique Escolano wrote: > You can use this command (write it in the lower command line) > > Mescape View Hardcopy Options PrintLogo No > > And then print your images > > Enrique > > ----- Original Message ----- > From: "Jose Munoz" <j.munoz at upc.edu <mailto:j.munoz at upc.edu... [GiDlist] GID icon in EPS files
Send by: Enrique Escolano Similar but using Mescape View Hardcopy Options _showaxes No ----- Original Message ----- From: "Jose Munoz" <j.munoz at upc.edu> To: <gidlist at gid.cimne.upc.edu> Sent: Friday, January 23, 2009 7:09 PM Subject: Re: [GiDlist] GID icon in EPS files > Dear GID time > > I have another doubt: can I also print postscript files that do not > contain the green icon with the axes? > > Thanks again, > > Jose Munoz ... [GiDlist] Legends in vectorial *.eps files
Send by: Jose Munoz Dear GID team, I want to create vectorial *.eps files with the legend in them. However, the numbers and words of the legends are not shown in the resulting *.eps files. I am using Windows System and versions 9.0.2 and 9.1.1b. Many thanks, Jose Munoz -- Jose J Munoz, http://www-lacan.upc.es/munoz/ Laboratori de Càlcul Numèric (LaCàN) Dep. Matemàtica Aplicada III Universitat Politècnica de Catalunya (UPC) Jordi Girona 1-3 E-08034 Barcelona, Spain j.munoz at upc.edu, Tel. + 34 93 401 7760 ... [GiDlist] Legends in vectorial *.eps files
Send by: miguel Thanks for the report. -- ---------------------------------------------------------------- Miguel Pasenau @: miguel at cimne.upc.edu Despacho C2, Edifico C1, Campus Norte UPC, c/ Gran Capitán s/n 08034 - Barcelona ( SPAIN) T: +34 3 93 401 74 03 F: +34 3 93 401 65 17 ---------------------------------------------------------------- IMPORTANT NOTICE All personal data contained in this mail will be processed confidentially and stored in a file property of CIMNE in order to manage corporate communications. You may exercise the right of access, rectification, deletion and objection by letter sent to CIMNE, Gran Capitán, Edificio C1 - Campus Norte UPC, 08034 Barcelona, Spain. -----Mensaje original----- De: ... [GiDlist] Legends in vectorial *.eps files
Send by: miguel Hello, In the next beta version the problem is solved, which caused that the text was not drawn in vectorial PS and EPS. Thanks, Miguel Pasenau -- ---------------------------------------------------------------- Miguel Pasenau @: miguel at cimne.upc.edu Despacho C2, Edifico C1, Campus Norte UPC, c/ Gran Capitán s/n 08034 - Barcelona ( SPAIN) T: +34 3 93 401 74 03 F: +34 3 93 401 65 17 ---------------------------------------------------------------- IMPORTANT NOTICE All personal data contained in this mail will be processed confidentially and stored in a file property of CIMNE in order to manage corporate communications. You may exercise the right of access, rectification, deletion and objection by letter sent to CIMNE, Gran Capitán, Edificio C1 - Campus Norte UPC, 08034 Barcelona, Spain. -----Mensaje original----- De: ... [GiDlist] GiD 8 on openSuSe 11.1
Send by: Malte von Scheven Hi, we are just trying to use GiD 8.2.0b-dyn-kernel2.6 on a new openSuse 11.1 system. When starting either gid or gidx the splash screen appears and the main window is opened but remains grey and the splash screen does not vanish. Nothing further happens. Trying the same with the newest version 9.0.2 everything works fine (except for a black drawing area for GLX rendering). As we own several licenses for version 8 we would prefer to stay with GiD 8 for a little longer. Thanks for any advice on how to run GiD 8.0.2b on our machines. Regards Malte -- Malte von Scheven ------------------ Institute of Structural Mechanics phone: +49 - 711 - 685 66121 University of Stuttgart, Germany fax: +49 - 711 - 685 66130 ... [GiDlist] Printing with Linux
Send by: Nunzio Losacco Hi, when I choose to print something from GiD under Linux I am asked which command I use to print files. I leave the default unchanged but in the message window I get "command unknown". What does it mean? Any help? Thanks, N. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20090122/be29fbb2/attachment.htm [GiDlist] Printing with Linux
Send by: miguel Hello, ‘lpr’ is the standard command line command to print files in Linux. Usually it’s installed by default in /usr/bin/lpr. Check out if it’s installed in your system. In the box, in the entry where lpr appears, you can enter the command you normally use to print files. When printin in Linux, GiD generates a .ps file and uses the ‘lpr’ command to print it. Best regards, Miguel Pasenau -- ---------------------------------------------------------------- Miguel Pasenau @: miguel at cimne.upc.edu Despacho C2, Edifico C1, Campus Norte UPC, c/ Gran Capitán s/n 08034 - Barcelona ( SPAIN) T: +34 3 93 401 74 03 F: +34 3 93 401 65 17 ---------------------------------------------------------------- IMPORTANT NOTICE All personal data contained in this mail will be processed confidentially and stored in a file property of CIMNE in order to manage corporate communications. You may exercise the right of access, rectification, deletion and objection by letter sent to CIMNE, Gran Capitán, Edificio C1 - Campus Norte UPC, 08034 Barcelona, Spain. _____ De: ... [GiDlist] RE: GiD problem: Black main screen
Send by: miguel Hello, I found and solved the problem with GiD and the new drivers from NVIDIA, version number >= 177.xx, which causes a black screen but for the axes box. This correction will be available in the next beta version of GiD, very soon. Miguel Pasenau -- ---------------------------------------------------------------- Miguel Pasenau @: miguel at cimne.upc.edu Despacho C2, Edifico C1, Campus Norte UPC, c/ Gran Capitán s/n 08034 - Barcelona ( SPAIN) T: +34 3 93 401 74 03 F: +34 3 93 401 65 17 ---------------------------------------------------------------- IMPORTANT NOTICE All personal data contained in this mail will be processed confidentially and stored in a file property of CIMNE in order to manage corporate communications. You may exercise the right of access, rectification, deletion and objection by letter sent to CIMNE, Gran Capitán, Edificio C1 - Campus Norte UPC, 08034 Barcelona, Spain. ... [GiDlist] Obtain mesh information
Send by: Rodrigo Augusto Hi, How can I do to get an information about the ElemenType passing with argument the element number using tcl routines? thanks -- Rodrigo Alves Augusto -------------- next part -------------- An HTML attachment was scrubbed... URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20090127/4bddcb89/attachment.htm [GiDlist] Obtain mesh information
Send by: Enrique Escolano You can use the "GiD_Info list_entities" command, e.g
GiD_Info list_entities -more elements $num
return something like this
"ELEMENTS
Num: 1 HigherEntity: 0 conditions: 0 material: 0
LAYER: Layer0
1 15793 16486 16720
Type=Triangle Nnode=3 Volume=5.66137e-007"
then you can find for example with a regexp the string after "Type="
regexp {Type=([A-Za-z]+)} [GiD_Info list_entities -more elements $num] {} elemtype
Since the last beta version 9.1.0b you can also use the Tcl command "GiD_Mesh get", that return the information more clean, as a tcl list. e.g.
GiD_Mesh get element $num
return something like "Layer0 Triangle 3 15793 16486 16720"
to get the element type (Triangle) use
set elemtype [lindex [GiD_Mesh get element $num] 1]
----- Original Message -----
From: Rodrigo Augusto
To: ...
[GiDlist] Obtain mesh information
Send by: Rodrigo Augusto Thanks, The function GiD_mesh works very fine and useful. But now ,I have one mores question. Is there some tcl routine to obtain if the mesh is structured or unstructured? This information is useful to speed up my finite element code. Thanks again 2009/1/27 Enrique Escolano <escolano at cimne.upc.edu> > You can use the "GiD_Info list_entities" command, e.g > GiD_Info list_entities -more elements $num > return something like this > "ELEMENTS > Num: 1 HigherEntity: 0 conditions: 0 material: 0 > LAYER: Layer0 ... [GiDlist] Obtain mesh information
Send by: Enrique Escolano Gid nodes or elements not contain any flag storing how they were created (structured, unstructured, semi-structured) The information is contained in the geometric source entities. As you know you can apply a condition with a field #FUNC#(NumEntity) to know the number of geometric entity parent of each element, Then you can use GiD_Info list_entities to ask for the geometry information, e.g. to ask for the surface number 257 -np- WarnWinText [GiD_Info list_entities surfaces 257] will return a string like this NURBSURFACE Num: 257 HigherEntity: 0 conditions: 0 material: 0 LAYER: Layer0 Meshing Info: (num=1,NOE=1) Elemtype=0 IsStructured=1 Meshing=Default size=0 NumLines: 5 Line: 742 Orientation: SAME1ST Line: 730 Orientation: SAME1ST ... and you can use a regexp command to filter the information that you want ----- Original Message ----- From: Rodrigo Augusto To: ... [GiDlist] Obtain mesh information
Send by: Rodrigo Augusto Hi, thanks again, what do they mean (num=1; NOE=1) on line "Meshing info" Thanks 2009/1/29 Enrique Escolano <escolano at cimne.upc.edu> > Gid nodes or elements not contain any flag storing how they were created > (structured, unstructured, semi-structured) > The information is contained in the geometric source entities. > > As you know you can apply a condition with a field #FUNC#(NumEntity) to know > the number of geometric entity parent of each element, > Then you can use GiD_Info list_entities to ask for the geometry ... [GiDlist] Obtain mesh information
Send by: Enrique Escolano This information is not relevant for you, num is an internal number of the "meshing information" and NOE is the number of entities sharing this information. ----- Original Message ----- From: Rodrigo Augusto To: gidlist at gid.cimne.upc.edu Sent: Friday, January 30, 2009 12:57 PM Subject: Re: [GiDlist] Obtain mesh information Hi, thanks again, what do they mean (num=1; NOE=1) on line "Meshing info" Thanks 2009/1/29 Enrique Escolano <escolano at cimne.upc.edu> Gid nodes or elements not contain any flag storing how they were created (structured, unstructured, semi-structured) The information is contained in the geometric source entities. As you know you can apply a condition with a field #FUNC#(NumEntity) to know the number of geometric entity parent of each element, Then you can use GiD_Info list_entities to ask for the geometry information, e.g. to ask for the surface number 257 -np- WarnWinText [GiD_Info list_entities surfaces 257] will return a string like this NURBSURFACE Num: 257 HigherEntity: 0 conditions: 0 material: 0 LAYER: Layer0 Meshing Info: (num=1,NOE=1) Elemtype=0 IsStructured=1 Meshing=Default size=0 NumLines: 5 Line: 742 Orientation: SAME1ST Line: 730 Orientation: SAME1ST ... and you can use a regexp command to filter the information that you want ----- Original Message ----- From: Rodrigo Augusto To: ... [GiDlist] boundary layer meshing
Send by: Smith, Mark Hi GiD team Is there a tutorial or example of how to use the boundary layer feature in meshing for arbitrary 3D geometry for CFD problems? How do you mix hexahedra and tet meshes? is there an automatic way of bridging between them with prism and pyramid elements as I seem unable to have some parts as structured mesh & other parts unstructured. Are there any plans for full automatic hexahedral meshing? GiD 9.04 on winXP Regards mark Please be advised that this email may contain confidential information. If you are not the intended recipient, please do not read, copy or re-transmit this email. If you have received this email in error, please notify us by email by replying to the sender and by telephone (call us collect at +1 202-828-0850) and delete this message and any attachments. Thank you in advance for your cooperation and assistance. In addition, Danaher and its subsidiaries disclaim that the content of this email constitutes an offer to enter into, or the acceptance of, any contract or agreement or any amendment thereto; provided that the foregoing disclaimer does not invalidate the binding effect of any digital or other electronic reproduction of a manual signature that is included in any attachment to this email. -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/ms-tnef Size: 3235 bytes Desc: not available Url : ... [GiDlist] boundary layer meshing
Send by: Abel Coll Dear Mark,
By now there is no tutorial for the boundary layer meshing. However, it is
very simple to use: The only thing you have to do is select 'Mesh->Boundary
layer->2D or 3D', and select the entities. For 3d, for example, first of all
you have to select the volumes into which the boundary layer mesh has to
"grow", and then the surfaces from which it should grow.
By the moment the 3d bundary layer meshes are only available for tetrahedra
volume meshes (no connection between hexas and tetras), and for linear
elements (not quadratic ones).
2D boundary layer mesher is available from the oficial version 9.0.x, and 3D
is only available from the 9.2.xb beta versions (all of them downladable
from the web site).
Kind regards,
ABEL
_________________________________
Abel Coll Sans - Civil Engineer
CIMNE - International Center for Numerical Methods in Engineering
Ofice c-2, C1 building - Campus Nord UPC
Gran Capità s/n, 08034 Barcelona
T: 34 - 93 401 74 03 Fax: 34 - 93 40 65 17
_____
AVISO IMPORTANTE
Los datos de carácter personal contenidos en el mensaje, se registrarán en
un fichero para facilitar la gestión de las comunicaciones de CIMNE. Se
pueden ejercitar los derechos de acceso, rectificación, cancelación y
oposición por escrito, dirigiéndose a nuestras oficinas de CIMNE, Gran
Capitán s/n, Edificio C1 - Campus Norte UPC, 08034 Barcelona, España.
AVÍS IMPORTANT
Les dades de caràcter personal contingudes en aquest missatge es registraran
en un fitxer per facilitar la gestió de les comunicacions del CIMNE. Es
poden exercir els drets d'accés, rectificació, cancel·lació i oposició, per
escrit a les nostres oficines del CIMNE, Gran Capità s/n, Edifici C1, Campus
Nord UPC, 08034 Barcelona, Espanya.
IMPORTANT NOTICE
All personal data contained in this mail will be processed confidentially
and stored in a file property of CIMNE in order to manage corporate
communications. You may exercise the right of access, rectification,
deletion and objection by letter sent to CIMNE, Gran Capitán, Edificio C1 -
Campus Norte UPC, 08034 Barcelona, Spain.
_____
_____
De: ...
[GiDlist] Modify Mesh Command
Send by: Rodrigo Augusto Hi, I would like to customize the mesh menu. For example, I have a condition applied on surfaces that defines the groups of elements in the project. And, I want to add in this condition the information about the shape of finite element (Quadrilateral or Triangle) , the size and if the mesh in this group will be structured or unstructured. As shown bellow NUMBER: 2 CONDITION: Surface_FEGroup CONDTYPE: over surfaces CONDMESHTYPE: over body elements TITLE: GROUP QUESTION: FEGroup VALUE:1 QUESTION: Element_Number#FUNC#(NumEntity) VALUE: 0 STATE:HIDDEN TITLE: MESH QUESTION:TYPE_OF_ELEMENT#CB#(QUADRILATERAL,TRIANGLE) VALUE:TRIANGLE QUESTION:STRUCTURED?#CB#(1,0) VALUE:0 QUESTION:MESH_SIZE VALUE:0.5 END CONDITION How can I do to open a window dialog an transfered this condition directly to the mesh generator? -- Rodrigo Alves Augusto thanks -------------- next part -------------- An HTML attachment was scrubbed... URL: ... [GiDlist] Modify Mesh Command
Send by: Enrique Escolano I think that is not a good idea to create a condition window alternative to our standard method to assing/draw meshing information (element type, sizes, structuration)
for example, for structured entities is necessary to select more information (divisions in each direction)
I think that instead to define this kind of condition, you can classify your groups of entities in different layers, and assign meshing info easily to the entities of this layers (the drawback is that an entity can only belong to one layer)
Note: when selecting it's possible to specify the enties of 'yourlayer' with
layer:yourlayer
In any case, if do you want to do it, you can use our 'BeforeMeshGeneration' Tcl event, that will be invoked just before meshing,
This is the prototype that you could implement in Tcl:
proc BeforeMeshGeneration { elementsize } {
...body...
}
you can use "GiD_Info Conditions" commands to ask GiD for the applied condition values, and then use GiD_Process commands to set the meshing information on the geometry in the standard way.
----- Original Message -----
From: Rodrigo Augusto
To: ...
[GiDlist] exporting boundary conditions in a .msh file
Send by: misabel at litec.csic.es Hello everybody! I have created a 2D geometry with its boundary conditions and its mesh. I want all this information to export in a "GiD msh" format. But I have realized that in the file I get there is information about the geometry, the mesh, the material of the elements but nothing about the boundary conditions. I would like to know how to export in this ".msh" (doing File-> export-> GiD msh) file the boundary conditions along with the other information. Thanks in advance. Best! Isabel [GiDlist] exporting boundary conditions in a .msh file
Send by: Enrique Escolano The GiD mesh format doesn't support the geometry or the boundary conditions, is only for the mesh. In fact the boundary conditions doesn't exists until they are defined by a problemtype, in this case usually the problemtype developer also define the .bas template to export all the information (mesh and conditions) required by its solver (with its specific format). Try to use Files->Export->Calculation file... (or press the Calculate menu to export this file and start the solver if any) Regards Enrique Escolano ----- Original Message ----- From: <misabel at litec.csic.es... [GiDlist] Uncollapse points
Send by: Lac Patrick Hello to all, I would like to duplicate points in the intersection of two lines. So I use Geometry -> Edit -> Uncollape -> Lines and select the two lines. The problem is that does not work. Is it a bug? Best regards Patrick Lac [GiDlist] Uncollapse points
Send by: Smith, Mark Version GiD9.0.2 Hi GiD team I would also like to see an option of uncollapse points make all points of spline curves and surfaces be restored. Regards mark -----Original Message----- From: gidlist-admin at gid.cimne.upc.edu [mailto:gidlist-admin at gid.cimne.upc.edu] On Behalf Of Lac Patrick Sent: 04 February 2009 15:49 To: gidlist at gid.cimne.upc.edu Subject: [GiDlist] Uncollapse points Hello to all, I would like to duplicate points in the intersection of two lines. So I use Geometry -> Edit -> Uncollape -> Lines and select the two lines. The problem is that does not work. Is it a bug? Best regards Patrick Lac _______________________________________________ GiDlist mailing list ... [GiDlist] Uncollapse points
Send by: Enrique Escolano Hello Patrick, You are right, it is a bug, (a variable was not initialized to 0 and the release version failed) Next Official 9.0.4 and beta 9.1.1b versions will include this correction Sorry Mark, we didn't understood your comment about an option to "uncollapse points" that "make all points of spline curves and surfaces be restored". Could you explain a little more what do you want to mean? Thanks Enrique Escolano ----- Original Message ----- From: "Lac Patrick" <patrick.lac at orange.fr> To: <gidlist at gid.cimne.upc.edu... [GiDlist] Uncollapse points
Send by: Smith, Mark Hi Enrique Lets say I define a series of points then put a nurbs line through them. Then I delete the points selecting all that I used, the only ones that are left are the start & finish points of the nurbs line. If I now save the model I cannot recover the points that I used to define the nurbs line as undo doesn't work once you have saved. like wise if you collapse a model & save all the points used to define lines then surfaces etc are lost forever & if you need to modify the geometry you have to use edit nurbs or divide the lines specifying the number of points which creates a new set & not those originally used. Hope I'm making myself clear? regards mark ________________________________ From: ... [GiDlist] How can I do to protect my problem_type for modifications by other users
Send by: Rodrigo Augusto Hi, I would like to protect my tcl routine for modifications and hide/obfuscate the algorithm being used in my problem type. Is there possible to do this and the GiD understand my tcl procedures? Best Regards -- Rodrigo Alves Augusto -------------- next part -------------- An HTML attachment was scrubbed... URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20090205/6e28c3d4/attachment.htm [GiDlist] Problemtype abaqus
Send by: Lac Patrick Hello Enrique, Thank you for your answer about "Uncollapse". I have another question which concerns the way used in the problemtype abaqus to write the file jobname.dat. In this problemtype a Tcl procedure is used in which one a list is appended. When this list returned to the program .bas its contents are written in jobname.dat. Here my problem: when the contents of the list are large it s' writing not in the file. I' have this kind of characters: " փ ". However if I launch several times "Export -> Calculation file" the contents ends up being written. Is there a solution to solve this problem? Best regards Patrick Lac ... [GiDlist] Problemtype abaqus
Send by: Enrique Escolano Hello Patrick, Wich GiD version and abaqus problemtype version are you using? Could you send a GiD example that show this problem (as small as possilble)? I' ve tried some meshes of triangles, but the problem doesn't happened. Note: you can send it directly to me instead to the whole gidlist. Regards Enrique ----- Original Message ----- From: "Lac Patrick" <patrick.lac at orange.fr> To: <gidlist at gid.cimne.upc.edu> Sent: Thursday, February 05, 2009 7:26 PM Subject: [GiDlist] Problemtype abaqus >... [GiDlist] Crete a segment-segment contact element
Send by: Rodrigo Augusto Hi, I want to know if there is a way to create a segment-segment discretization in 2d contact problem and a surface-surface discretization in 3D contact problem in the same way that ANSYS generates its contact elements. In Gid when I have two coincident linesand create a contact surface the meshing process generated a 4node planar quadrilateral, where two nodes belongs for ones body and the others two for the other body. I want to split this information in the context of target and contactor elements. How can I do this? Best Regards -- Rodrigo Alves Augusto -------------- next part -------------- An HTML attachment was scrubbed... URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20090210/1a538674/attachment.htm... [GiDlist] Crete a segment-segment contact element
Send by: Enrique Escolano I fdon't know how are the 'Ansys contact elements' that you want to use. I'm not an Ansys user, but I think that there are several kind of contacts: - nodes against nodes or against element faces - explicitly classified or not in two groups: source and target (master/slave) - with relationship one-to-one between contact nodes 'GiD contact elements' are only necessary if you need a one-to-one node relationship, and also they aid to identity pairs of contacting nodes (nodes connected by the extra cuadrilateral or line element of the contact entity) Another approach alternative to the 'GiD contact elements', where is necessary to have coincident lines/surfaces (unfriendly) is to use the "Mesh criteria->Duplicate", then you can have a single geometric entity and assign this meshing criteria to obtain "duplicated" contact nodes. Probably instead the 'GiD contact entities' you can use some condition to mark nodes, body elements or face elements and if necessary set a field to say if it's "source" or "target" (and contact parameters, like friction coefficients, etc) Regards Enrique Escolano ----- Original Message ----- From: Rodrigo Augusto To: ... [GiDlist] Crete a segment-segment contact element
Send by: Rodrigo Augusto Thanks Enrique, One more information. I need to know what is the GiD tcl command used to return the information about the GiD contact elements.With GiD discretization (one-to-one relationship) it is possible to use my algorithm developed, because I am using the segment-segment discretization for matching mesh with infinitesimal deformation. Best Regards 2009/2/10 Enrique Escolano <escolano at cimne.upc.edu> > I fdon't know how are the 'Ansys contact elements' that you want to use. > I'm not an Ansys user, but I think that there are several kind of contacts: ... [GiDlist] Tutorial para cálculo remoto
Send by: Jesus F Gracia Hola:Estoy tratando de configurar un Tipo de Problema de GID en la red local de mi empresa y quisiera que el proceso de cálculo fuera remoto pero dentro de nuestra red local. La ayuda en GID para configurar este tipo de servicio simplemente no existe, solo menciona el uso de ProcServer en el servidor, para lo cual no he encontrado ayuda tampoco. ¿Existe algún tipo de tutorial para configurar este servicio?La red la conforman equipos MacOSX, la versión de GID para este ambiente es prácticamente inutilizable (muy inestable), así que GID corre en Linux (ubuntu) bajo Virtual Machine, pero el proceso de cálculo pretendo que sea en un Mac Server QuadCore. Actualmente he solventado esto conectandome al server usando ssh en el script del tipo del problema (copiar los archivos del problema *.dat al servidor, invocar el proceso y recibir los archivos *.log, *.err y *.res) aunque el acceso al documento .log solo se hace hasta el final del proceso por lo que el avance en los cálculos no es tan transparente, por lo que quisiera experimentar con ProcServer.Gracias! _________________________________________________________________ News, entertainment and everything you care about at Live.com. Get it now! ... [GiDlist] Re: [GiDlist] Tutorial para cálculo remoto
Send by: Enrique Escolano Hola Jesus, ProcServer es un programa adicional que hay que instalar en el servidor, y con el cual se comunica directamente GiD. Es una utilidad no muy usual, y no se puede descargar directamente de nuestra web ni hemos puesto casi información de uso, hay que contactar con nosotros para obtenerla. Para usarlo, básicamente hay que copiar el 'problemtype' que usarías localmente en el servidor. El script de ejecución del cálculo debería ser para un caso 'local' (es decir eliminando la parte que has agregado de envio de ficheros y ejecutando directamente el programa de cálculo en local) En este momento solo tenemos compilada y empaquetada con un instalador la versión de Windows (el cliente GiD por supuesto puede usar un sistema operativo distinto) Aunque es sencillo compilar una versión de ProcServer para Linux conlleva un cierto trabajo. Creo que no será complicado tener tambien una versión de ProcServer para MacOSX. En cuanto tengamos alguna de estas versiones disponibles te informo. En cuanto a GiD para MacOSX es una tarea más complicada, estamos trabajando en ello y creo que en pocos meses habrá una beta disponible (como sabes actualmente la versión de MacOSX que tenemos está muy anticuada, es una versión 7.2 y como dices es dificilmente usable en un Mac actual) Saludos Enrique Escolano ----- Original Message ----- From: Jesus F Gracia To: ... [GiDlist] Crete a segment-segment contact element
Send by: Enrique Escolano Contact elements internally are like the rest of standard elements. You can ask them from the .bas file with *elemsnum, *elemsconec, etc. Maybe you can difference them by the type of the element (e.g. your main mesh have triangles, and the contact are cuadrilaterals, or line elements) You can also use some additional condition to mark them, or separate by layers. ----- Original Message ----- From: Rodrigo Augusto To: gidlist at gid.cimne.upc.edu Sent: Tuesday, February 10, 2009 5:30 PM Subject: Re: [GiDlist] Crete a segment-segment contact element Thanks Enrique, One more information. I need to know what is the GiD tcl command used to return the information about the GiD contact elements.With GiD discretization (one-to-one relationship) it is possible to use my algorithm developed, because I am using the segment-segment discretization for matching mesh with infinitesimal deformation. Best Regards 2009/2/10 Enrique Escolano <... [GiDlist] Graphic Error
Send by: Tontavanich, Bituporn GiD team, I am using GiD version 9.0.2. When showing the results in post-process, the graphic error appears as shown below. Do you know what happen and how to get rid of those small triangles? [cid:image001.png at 01C9915F.0F58FAA0] Thank you. Bituporn Tontavanich -------------- next part -------------- An HTML attachment was scrubbed... URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20090218/943cb683/attachment.htm -------------- next part -------------- A non-text attachment was scrubbed... Name: image001.png Type: image/png Size: 25301 bytes Desc: image001.png Url : ... [GiDlist] Graphic Error
Send by: miguel at cimne.upc.edu Heelo, can you provide as with an example, so that we can check and look for the error? Miguel Pasenau > GiD team, > > I am using GiD version 9.0.2. When showing the results in post-process, > the graphic error appears as shown below. Do you know what happen and how > to get rid of those small triangles? > > > > > > > > > > [cid:image001.png at 01C9915F.0F58FAA0] > > > > >... [GiDlist] Graphic Error
Send by: Tontavanich, Bituporn Hi Miguel,
The output file is shown below.
Thank you.
Bituporn Tontavanich
GiD Post Results File 1.0
Result Suction Static 1 Scalar OnNodes
Values
1 4.180
2 4.209
3 4.233
4 4.180
5 4.180
6 4.252
7 4.233
8 4.233
9 4.264
10 4.264
11 4.264
12 4.180
13 4.180
14 4.209
15 4.209
16 4.271
17 4.233
18 4.233
19 4.180
20 4.180
21 4.252
22 4.252
23 4.233
24 4.233
25 4.275
26 4.264
27 4.264
28 4.275
29 4.275
30 4.264
31 4.264
32 4.180
33 4.209
34 4.271
35 4.271
36 4.233
37 4.180
38 4.180
39 4.276
40 4.252
41 4.233
42 4.233
43 4.275
44 4.275
45 4.264
46 4.275
47 4.275
48 4.276
49 4.264
50 4.264
51 4.271
52 4.276
53 4.276
54 4.180
55 4.180
56 4.276
57 4.276
58 4.233
59 4.233
60 4.275
61 4.275
62 4.275
63 4.275
64 4.276
65 4.276
66 4.264
67 4.264
68 4.180
69 4.180
70 4.209
71 4.209
72 4.233
73 4.233
74 4.276
75 4.276
76 4.180
77 4.180
78 4.276
79 4.252
80 4.252
81 4.233
82 4.233
83 4.273
84 4.275
85 4.275
86 4.264
87 4.264
88 4.273
89 4.273
90 4.275
91 4.275
92 4.276
93 4.264
94 4.264
95 4.180
96 4.180
97 4.209
98 4.209
99 4.271
100 4.271
101 4.233
102 4.233
103 4.276
104 4.276
105 4.252
106 4.252
107 4.272
108 4.273
109 4.273
110 4.275
111 4.275
112 4.275
113 4.264
114 4.264
115 4.273
116 4.273
117 4.275
118 4.275
119 4.271
120 4.271
121 4.276
122 4.276
123 4.180
124 4.180
125 4.180
126 4.180
127 4.276
128 4.276
129 4.233
130 4.233
131 4.233
132 4.233
133 4.272
134 4.272
135 4.273
136 4.271
137 4.275
138 4.275
139 4.273
140 4.273
141 4.271
142 4.271
143 4.276
144 4.276
145 4.264
146 4.264
147 4.264
148 4.264
149 4.276
150 4.276
151 4.180
152 4.180
153 4.276
154 4.276
155 4.233
156 4.233
157 4.272
158 4.271
159 4.271
160 4.275
161 4.275
162 4.271
163 4.273
164 4.273
165 4.271
166 4.271
167 4.275
168 4.275
169 4.275
170 4.275
171 4.276
172 4.276
173 4.264
174 4.264
175 4.180
176 4.209
177 4.233
178 4.252
179 4.273
180 4.273
181 4.271
182 4.275
183 4.275
184 4.264
185 4.271
186 4.271
187 4.273
188 4.273
189 4.271
190 4.271
191 4.275
192 4.275
193 4.180
194 4.180
195 4.270
196 4.209
197 4.209
198 4.271
199 4.233
200 4.233
201 4.276
202 4.276
203 4.276
204 4.276
205 4.180
206 4.180
207 4.270
208 4.270
209 4.252
210 4.252
211 4.233
212 4.233
213 4.272
214 4.272
215 4.273
216 4.273
217 4.275
218 4.264
219 4.264
220 4.271
221 4.271
222 4.271
223 4.264
224 4.264
225 4.180
226 4.180
227 4.270
228 4.270
229 4.209
230 4.209
231 4.271
232 4.271
233 4.233
234 4.233
235 4.276
236 4.276
237 4.180
238 4.180
239 4.276
240 4.270
241 4.270
242 4.270
243 4.252
244 4.252
245 4.233
246 4.233
247 4.272
248 4.272
249 4.271
250 4.271
251 4.275
252 4.275
253 4.264
254 4.264
255 4.273
256 4.273
257 4.273
258 4.273
259 4.271
260 4.271
261 4.275
262 4.275
263 4.276
264 4.264
265 4.264
266 4.270
267 4.271
268 4.271
269 4.180
270 4.180
271 4.276
272 4.276
273 4.270
274 4.270
275 4.270
276 4.270
277 4.233
278 4.233
279 4.271
280 4.271
281 4.275
282 4.275
283 4.275
284 4.271
285 4.271
286 4.270
287 4.273
288 4.273
289 4.275
290 4.275
291 4.276
292 4.276
293 4.264
294 4.264
295 4.270
296 4.270
297 4.276
298 4.276
299 4.180
300 4.180
301 4.276
302 4.276
303 4.270
304 4.270
305 4.270
306 4.233
307 4.233
308 4.273
309 4.275
310 4.275
311 4.271
312 4.271
313 4.270
314 4.270
315 4.271
316 4.271
317 4.271
318 4.271
319 4.275
320 4.275
321 4.276
322 4.276
323 4.264
324 4.264
325 4.180
326 4.180
327 4.270
328 4.270
329 4.270
330 4.270
331 4.209
332 4.209
333 4.233
334 4.233
335 4.276
336 4.276
337 4.180
338 4.180
339 4.270
340 4.270
341 4.270
342 4.252
343 4.252
344 4.233
345 4.233
346 4.272
347 4.273
348 4.273
349 4.275
350 4.275
351 4.264
352 4.264
353 4.270
354 4.273
355 4.273
356 4.271
357 4.271
358 4.275
359 4.275
360 4.264
361 4.264
362 4.270
363 4.270
364 4.270
365 4.270
366 4.271
367 4.271
368 4.276
369 4.276
370 4.270
371 4.270
372 4.270
373 4.270
374 4.272
375 4.272
376 4.273
377 4.273
378 4.271
379 4.275
380 4.275
381 4.273
382 4.273
383 4.275
384 4.275
385 4.270
386 4.270
387 4.270
388 4.270
389 4.270
390 4.276
391 4.276
392 4.180
393 4.180
394 4.276
395 4.276
396 4.270
397 4.270
398 4.270
399 4.270
400 4.270
401 4.270
402 4.270
403 4.233
404 4.233
405 4.272
406 4.272
407 4.271
408 4.271
409 4.271
410 4.270
411 4.270
412 4.273
413 4.273
414 4.271
415 4.271
416 4.270
417 4.270
418 4.276
419 4.276
420 4.264
421 4.264
422 4.180
423 4.180
424 4.270
425 4.270
426 4.209
427 4.209
428 4.270
429 4.270
430 4.233
431 4.233
432 4.276
433 4.276
434 4.180
435 4.180
436 4.180
437 4.180
438 4.270
439 4.270
440 4.252
441 4.252
442 4.233
443 4.233
444 4.233
445 4.233
446 4.271
447 4.271
448 4.275
449 4.275
450 4.264
451 4.264
452 4.271
453 4.271
454 4.270
455 4.270
456 4.273
457 4.273
458 4.271
459 4.271
460 4.275
461 4.275
462 4.270
463 4.264
464 4.264
465 4.264
466 4.264
467 4.180
468 4.180
469 4.270
470 4.209
471 4.209
472 4.271
473 4.271
474 4.270
475 4.270
476 4.233
477 4.233
478 4.270
479 4.270
480 4.252
481 4.252
482 4.273
483 4.273
484 4.275
485 4.275
486 4.264
487 4.264
488 4.271
489 4.271
490 4.273
491 4.273
492 4.271
493 4.271
494 4.275
495 4.275
496 4.275
497 4.275
498 4.180
499 4.270
500 4.270
501 4.270
502 4.270
503 4.270
504 4.270
505 4.209
506 4.271
507 4.271
508 4.270
509 4.270
510 4.233
511 4.276
512 4.276
513 4.180
514 4.180
515 4.276
516 4.276
517 4.270
518 4.270
519 4.270
520 4.270
521 4.270
522 4.252
523 4.233
524 4.233
525 4.272
526 4.272
527 4.275
528 4.275
529 4.264
530 4.271
531 4.271
532 4.270
533 4.270
534 4.276
535 4.276
536 4.264
537 4.264
538 4.270
539 4.270
540 4.270
541 4.270
542 4.271
543 4.270
544 4.270
545 4.276
546 4.276
547 4.276
548 4.276
549 4.276
550 4.276
551 4.270
552 4.270
553 4.270
554 4.270
555 4.271
556 4.271
557 4.275
558 4.275
559 4.275
560 4.270
561 4.273
562 4.273
563 4.271
564 4.271
565 4.275
566 4.275
567 4.270
568 4.270
569 4.276
570 4.276
571 4.180
572 4.180
573 4.209
574 4.209
575 4.233
576 4.233
577 4.180
578 4.180
579 4.276
580 4.270
581 4.270
582 4.270
583 4.270
584 4.252
585 4.252
586 4.233
587 4.233
588 4.273
589 4.273
590 4.275
591 4.275
592 4.264
593 4.264
594 4.271
595 4.271
596 4.270
597 4.270
598 4.273
599 4.273
600 4.273
601 4.273
602 4.276
603 4.264
604 4.264
605 4.270
606 4.270
607 4.271
608 4.271
609 4.270
610 4.270
611 4.270
612 4.270
613 4.276
614 4.276
615 4.180
616 4.180
617 4.180
618 4.180
619 4.270
620 4.270
621 4.270
622 4.233
623 4.233
624 4.233
625 4.233
626 4.272
627 4.272
628 4.273
629 4.273
630 4.275
631 4.275
632 4.275
633 4.270
634 4.270
635 4.271
636 4.271
637 4.275
638 4.275
639 4.264
640 4.264
641 4.264
642 4.264
643 4.270
644 4.270
645 4.270
646 4.270
647 4.270
648 4.270
649 4.180
650 4.180
651 4.276
652 4.276
653 4.270
654 4.270
655 4.270
656 4.270
657 4.233
658 4.233
659 4.272
660 4.272
661 4.273
662 4.271
663 4.271
664 4.273
665 4.273
666 4.271
667 4.271
668 4.271
669 4.271
670 4.275
671 4.275
672 4.275
673 4.275
674 4.270
675 4.276
676 4.276
677 4.264
678 4.264
679 4.270
680 4.270
681 4.276
682 4.276
683 4.270
684 4.270
685 4.270
686 4.270
687 4.272
688 4.271
689 4.271
690 4.275
691 4.275
692 4.271
693 4.271
694 4.275
695 4.275
696 4.270
697 4.270
698 4.270
699 4.270
700 4.270
701 4.270
702 4.276
703 4.276
704 4.276
705 4.276
706 4.180
707 4.180
708 4.270
709 4.270
710 4.233
711 4.233
712 4.273
713 4.273
714 4.271
715 4.271
716 4.271
717 4.270
718 4.270
719 4.273
720 4.273
721 4.271
722 4.271
723 4.270
724 4.270
725 4.264
726 4.264
727 4.180
728 4.180
729 4.180
730 4.180
731 4.270
732 4.270
733 4.270
734 4.270
735 4.209
736 4.209
737 4.209
738 4.209
739 4.270
740 4.270
741 4.233
742 4.233
743 4.233
744 4.233
745 4.276
746 4.276
747 4.180
748 4.180
749 4.270
750 4.270
751 4.270
752 4.270
753 4.252
754 4.252
755 4.252
756 4.252
757 4.233
758 4.233
759 4.272
760 4.272
761 4.264
762 4.264
763 4.264
764 4.264
765 4.271
766 4.273
767 4.273
768 4.273
769 4.273
770 4.275
771 4.275
772 4.264
773 4.264
774 4.180
775 4.180
776 4.270
777 4.270
778 4.209
779 4.209
780 4.271
781 4.271
782 4.271
783 4.271
784 4.270
785 4.270
786 4.233
787 4.233
788 4.270
789 4.270
790 4.270
791 4.270
792 4.252
793 4.252
794 4.271
795 4.271
796 4.275
797 4.275
798 4.275
799 4.275
800 4.264
801 4.264
802 4.273
803 4.273
804 4.271
805 4.271
806 4.275
807 4.275
808 4.270
809 4.270
810 4.270
811 4.271
812 4.271
813 4.270
814 4.270
815 4.276
816 4.276
817 4.180
818 4.180
819 4.276
820 4.276
821 4.276
822 4.276
823 4.270
824 4.270
825 4.270
826 4.270
827 4.233
828 4.233
829 4.275
830 4.275
831 4.271
832 4.271
833 4.270
834 4.270
835 4.271
836 4.271
837 4.271
838 4.271
839 4.270
840 4.270
841 4.276
842 4.276
843 4.276
844 4.276
845 4.264
846 4.264
847 4.270
848 4.270
849 4.270
850 4.270
851 4.270
852 4.270
853 4.276
854 4.276
855 4.180
856 4.180
857 4.276
858 4.276
859 4.270
860 4.233
861 4.233
862 4.275
863 4.275
864 4.275
865 4.275
866 4.270
867 4.270
868 4.273
869 4.273
870 4.271
871 4.271
872 4.275
873 4.275
874 4.276
875 4.276
876 4.264
877 4.264
878 4.180
879 4.180
880 4.270
881 4.270
882 4.209
883 4.209
884 4.233
885 4.233
886 4.180
887 4.180
888 4.270
889 4.270
890 4.270
891 4.270
892 4.252
893 4.252
894 4.233
895 4.233
896 4.273
897 4.273
898 4.273
899 4.273
900 4.275
901 4.275
902 4.264
903 4.264
904 4.270
905 4.273
906 4.273
907 4.275
908 4.275
909 4.264
910 4.264
911 4.270
912 4.270
913 4.271
914 4.271
915 4.270
916 4.270
917 4.276
918 4.276
919 4.180
920 4.180
921 4.270
922 4.270
923 4.270
924 4.270
925 4.270
926 4.270
927 4.270
928 4.270
929 4.233
930 4.233
931 4.272
932 4.272
933 4.272
934 4.272
935 4.273
936 4.273
937 4.275
938 4.275
939 4.271
940 4.271
941 4.275
942 4.275
943 4.270
944 4.270
945 4.264
946 4.264
947 4.270
948 4.270
949 4.270
950 4.270
951 4.276
952 4.276
953 4.180
954 4.180
955 4.180
956 4.180
957 4.276
958 4.276
959 4.270
960 4.270
961 4.270
962 4.233
963 4.233
964 4.233
965 4.233
966 4.272
967 4.272
968 4.271
969 4.271
970 4.271
971 4.271
972 4.270
973 4.270
974 4.273
975 4.273
976 4.271
977 4.271
978 4.275
979 4.275
980 4.270
981 4.270
982 4.276
983 4.276
984 4.264
985 4.264
986 4.264
987 4.264
988 4.180
989 4.270
990 4.270
991 4.209
992 4.233
993 4.276
994 4.276
995 4.252
996 4.271
997 4.271
998 4.275
999 4.275
1000 4.264
1001 4.271
1002 4.271
1003 4.271
1004 4.271
1005 4.273
1006 4.273
1007 4.275
1008 4.275
1009 4.275
1010 4.275
1011 4.270
1012 4.270
1013 4.270
1014 4.270
1015 4.270
1016 4.271
1017 4.270
1018 4.270
1019 4.276
1020 4.276
1021 4.270
1022 4.270
1023 4.270
1024 4.270
1025 4.273
1026 4.273
1027 4.275
1028 4.271
1029 4.271
1030 4.273
1031 4.273
1032 4.271
1033 4.271
1034 4.180
1035 4.180
1036 4.270
1037 4.270
1038 4.270
1039 4.270
1040 4.270
1041 4.270
1042 4.209
1043 4.209
1044 4.233
1045 4.233
1046 4.276
1047 4.276
1048 4.276
1049 4.276
1050 4.180
1051 4.180
1052 4.276
1053 4.270
1054 4.270
1055 4.252
1056 4.252
1057 4.233
1058 4.233
1059 4.272
1060 4.272
1061 4.264
1062 4.264
1063 4.273
1064 4.273
1065 4.271
1066 4.271
1067 4.270
1068 4.270
1069 4.276
1070 4.264
1071 4.264
1072 4.270
1073 4.270
1074 4.271
1075 4.271
1076 4.270
1077 4.270
1078 4.270
1079 4.270
1080 4.270
1081 4.270
1082 4.271
1083 4.271
1084 4.275
1085 4.275
1086 4.275
1087 4.273
1088 4.273
1089 4.273
1090 4.273
1091 4.271
1092 4.271
1093 4.275
1094 4.275
1095 4.180
1096 4.180
1097 4.270
1098 4.270
1099 4.209
1100 4.209
1101 4.270
1102 4.270
1103 4.270
1104 4.270
1105 4.233
1106 4.233
1107 4.180
1108 4.180
1109 4.180
1110 4.180
1111 4.276
1112 4.276
1113 4.270
1114 4.270
1115 4.270
1116 4.270
1117 4.252
1118 4.252
1119 4.233
1120 4.233
1121 4.233
1122 4.233
1123 4.273
1124 4.264
1125 4.264
1126 4.271
1127 4.271
1128 4.270
1129 4.270
1130 4.270
1131 4.270
1132 4.271
1133 4.271
1134 4.276
1135 4.276
1136 4.264
1137 4.264
1138 4.264
1139 4.264
1140 4.180
1141 4.180
1142 4.270
1143 4.270
1144 4.209
1145 4.209
1146 4.271
1147 4.271
1148 4.270
1149 4.270
1150 4.233
1151 4.233
1152 4.276
1153 4.276
1154 4.180
1155 4.180
1156 4.270
1157 4.270
1158 4.252
1159 4.252
1160 4.233
1161 4.233
1162 4.272
1163 4.275
1164 4.275
1165 4.275
1166 4.275
1167 4.264
1168 4.264
1169 4.270
1170 4.270
1171 4.271
1172 4.271
1173 4.271
1174 4.271
1175 4.275
1176 4.275
1177 4.275
1178 4.275
1179 4.264
1180 4.264
1181 4.270
1182 4.270
1183 4.271
1184 4.271
1185 4.180
1186 4.180
1187 4.276
1188 4.276
1189 4.270
1190 4.270
1191 4.270
1192 4.270
1193 4.270
1194 4.270
1195 4.233
1196 4.233
1197 4.273
1198 4.273
1199 4.271
1200 4.275
1201 4.275
1202 4.273
1203 4.273
1204 4.275
1205 4.275
1206 4.276
1207 4.276
1208 4.264
1209 4.264
1210 4.270
1211 4.270
1212 4.270
1213 4.270
1214 4.276
1215 4.276
1216 4.276
1217 4.276
1218 4.180
1219 4.180
1220 4.276
1221 4.276
1222 4.270
1223 4.270
1224 4.270
1225 4.270
1226 4.270
1227 4.270
1228 4.233
1229 4.233
1230 4.272
1231 4.272
1232 4.275
1233 4.275
1234 4.271
1235 4.275
1236 4.275
1237 4.270
1238 4.270
1239 4.270
1240 4.270
1241 4.276
1242 4.276
1243 4.264
1244 4.264
1245 4.180
1246 4.180
1247 4.270
1248 4.270
1249 4.209
1250 4.209
1251 4.270
1252 4.270
1253 4.233
1254 4.233
1255 4.276
1256 4.276
1257 4.270
1258 4.270
1259 4.270
1260 4.270
1261 4.252
1262 4.252
1263 4.273
1264 4.273
1265 4.271
1266 4.271
1267 4.275
1268 4.275
1269 4.264
1270 4.264
1271 4.270
1272 4.270
1273 4.273
1274 4.273
1275 4.273
1276 4.273
1277 4.271
1278 4.271
1279 4.275
1280 4.275
1281 4.270
1282 4.270
1283 4.180
1284 4.180
1285 4.270
1286 4.270
1287 4.270
1288 4.209
1289 4.209
1290 4.271
1291 4.271
1292 4.233
1293 4.233
1294 4.276
1295 4.276
1296 4.252
1297 4.252
1298 4.272
1299 4.272
1300 4.273
1301 4.273
1302 4.275
1303 4.275
1304 4.264
1305 4.264
1306 4.271
1307 4.271
1308 4.273
1309 4.273
1310 4.270
1311 4.270
1312 4.271
1313 4.271
1314 4.270
1315 4.270
1316 4.276
1317 4.276
1318 4.180
1319 4.180
1320 4.180
1321 4.180
1322 4.276
1323 4.276
1324 4.270
1325 4.270
1326 4.270
1327 4.233
1328 4.233
1329 4.233
1330 4.233
1331 4.272
1332 4.272
1333 4.271
1334 4.271
1335 4.275
1336 4.275
1337 4.273
1338 4.273
1339 4.271
1340 4.271
1341 4.271
1342 4.271
1343 4.276
1344 4.276
1345 4.264
1346 4.264
1347 4.264
1348 4.264
1349 4.270
1350 4.270
1351 4.270
1352 4.270
1353 4.270
1354 4.270
1355 4.270
1356 4.270
1357 4.180
1358 4.180
1359 4.276
1360 4.276
1361 4.270
1362 4.270
1363 4.233
1364 4.233
1365 4.271
1366 4.271
1367 4.275
1368 4.275
1369 4.271
1370 4.271
1371 4.270
1372 4.273
1373 4.273
1374 4.271
1375 4.271
1376 4.275
1377 4.275
1378 4.275
1379 4.275
1380 4.270
1381 4.270
1382 4.276
1383 4.276
1384 4.264
1385 4.264
1386 4.270
1387 4.270
1388 4.270
1389 4.270
1390 4.273
1391 4.273
1392 4.275
1393 4.275
1394 4.271
1395 4.271
1396 4.271
1397 4.271
1398 4.275
1399 4.275
1400 4.180
1401 4.180
1402 4.270
1403 4.270
1404 4.209
1405 4.209
1406 4.270
1407 4.270
1408 4.233
1409 4.233
1410 4.276
1411 4.276
1412 4.276
1413 4.276
1414 4.180
1415 4.180
1416 4.270
1417 4.270
1418 4.270
1419 4.270
1420 4.270
1421 4.252
1422 4.252
1423 4.233
1424 4.233
1425 4.272
1426 4.272
1427 4.273
1428 4.273
1429 4.264
1430 4.264
1431 4.270
1432 4.270
1433 4.271
1434 4.271
1435 4.264
1436 4.264
1437 4.270
1438 4.270
1439 4.270
1440 4.270
1441 4.271
1442 4.271
1443 4.270
1444 4.270
1445 4.270
1446 4.270
1447 4.276
1448 4.276
1449 4.180
1450 4.180
1451 4.180
1452 4.180
1453 4.270
1454 4.270
1455 4.270
1456 4.270
1457 4.233
1458 4.233
1459 4.233
1460 4.233
1461 4.272
1462 4.272
1463 4.271
1464 4.271
1465 4.275
1466 4.275
1467 4.273
1468 4.273
1469 4.273
1470 4.273
1471 4.275
1472 4.275
1473 4.270
1474 4.264
1475 4.264
1476 4.264
1477 4.264
1478 4.276
1479 4.276
1480 4.270
1481 4.270
1482 4.270
1483 4.270
1484 4.270
1485 4.270
1486 4.271
1487 4.271
1488 4.271
1489 4.271
1490 4.270
1491 4.270
1492 4.273
1493 4.273
1494 4.275
1495 4.275
1496 4.275
1497 4.275
1498 4.276
1499 4.276
1500 4.270
1501 4.270
1502 4.270
1503 4.270
1504 4.276
1505 4.276
1506 4.180
1507 4.180
1508 4.270
1509 4.270
1510 4.233
1511 4.233
1512 4.275
1513 4.275
1514 4.271
1515 4.271
1516 4.270
1517 4.270
1518 4.271
1519 4.271
1520 4.271
1521 4.271
1522 4.270
1523 4.270
1524 4.264
1525 4.264
1526 4.180
1527 4.180
1528 4.270
1529 4.270
1530 4.270
1531 4.270
1532 4.209
1533 4.209
1534 4.270
1535 4.270
1536 4.233
1537 4.233
1538 4.276
1539 4.276
1540 4.276
1541 4.276
1542 4.180
1543 4.180
1544 4.270
1545 4.270
1546 4.252
1547 4.252
1548 4.233
1549 4.233
1550 4.273
1551 4.273
1552 4.264
1553 4.264
1554 4.273
1555 4.273
1556 4.271
1557 4.271
1558 4.275
1559 4.275
1560 4.264
1561 4.264
1562 4.180
1563 4.180
1564 4.180
1565 4.270
1566 4.270
1567 4.270
1568 4.270
1569 4.209
1570 4.209
1571 4.209
1572 4.271
1573 4.271
1574 4.233
1575 4.233
1576 4.233
1577 4.270
1578 4.270
1579 4.270
1580 4.270
1581 4.252
1582 4.252
1583 4.252
1584 4.272
1585 4.272
1586 4.275
1587 4.275
1588 4.264
1589 4.264
1590 4.264
1591 4.273
1592 4.273
1593 4.273
1594 4.273
1595 4.275
1596 4.275
1597 4.270
1598 4.270
1599 4.270
1600 4.270
1601 4.271
1602 4.271
1603 4.271
1604 4.270
1605 4.270
1606 4.270
1607 4.270
1608 4.276
1609 4.276
1610 4.180
1611 4.180
1612 4.180
1613 4.180
1614 4.276
1615 4.276
1616 4.270
1617 4.270
1618 4.270
1619 4.270
1620 4.270
1621 4.270
1622 4.233
1623 4.233
1624 4.233
1625 4.233
1626 4.271
1627 4.271
1628 4.275
1629 4.275
1630 4.275
1631 4.270
1632 4.270
1633 4.271
1634 4.271
1635 4.270
1636 4.270
1637 4.276
1638 4.276
1639 4.264
1640 4.264
1641 4.264
1642 4.264
1643 4.180
1644 4.180
1645 4.209
1646 4.209
1647 4.270
1648 4.270
1649 4.233
1650 4.233
1651 4.276
1652 4.276
1653 4.276
1654 4.276
1655 4.276
1656 4.270
1657 4.270
1658 4.252
1659 4.252
1660 4.275
1661 4.275
1662 4.264
1663 4.264
1664 4.271
1665 4.271
1666 4.270
1667 4.270
1668 4.273
1669 4.273
1670 4.271
1671 4.271
1672 4.271
1673 4.271
1674 4.275
1675 4.275
1676 4.275
1677 4.275
1678 4.276
1679 4.276
1680 4.276
1681 4.180
1682 4.180
1683 4.209
1684 4.209
1685 4.271
1686 4.271
1687 4.270
1688 4.270
1689 4.233
1690 4.233
1691 4.270
1692 4.270
1693 4.252
1694 4.252
1695 4.273
1696 4.273
1697 4.275
1698 4.275
1699 4.275
1700 4.275
1701 4.275
1702 4.264
1703 4.264
1704 4.273
1705 4.273
1706 4.270
1707 4.270
1708 4.270
1709 4.270
1710 4.270
1711 4.270
1712 4.271
1713 4.271
1714 4.270
1715 4.270
1716 4.276
1717 4.276
1718 4.276
1719 4.276
1720 4.276
1721 4.276
1722 4.270
1723 4.270
1724 4.270
1725 4.270
1726 4.272
1727 4.272
1728 4.273
1729 4.273
1730 4.273
1731 4.275
1732 4.275
1733 4.271
1734 4.271
1735 4.270
1736 4.270
1737 4.276
1738 4.276
1739 4.270
1740 4.270
1741 4.180
1742 4.180
1743 4.180
1744 4.180
1745 4.276
1746 4.276
1747 4.270
1748 4.270
1749 4.270
1750 4.270
1751 4.270
1752 4.270
1753 4.233
1754 4.233
1755 4.233
1756 4.233
1757 4.272
1758 4.272
1759 4.272
1760 4.271
1761 4.271
1762 4.275
1763 4.275
1764 4.273
1765 4.273
1766 4.273
1767 4.273
1768 4.271
1769 4.271
1770 4.270
1771 4.270
1772 4.276
1773 4.276
1774 4.264
1775 4.264
1776 4.264
1777 4.264
1778 4.180
1779 4.180
1780 4.180
1781 4.180
1782 4.233
1783 4.233
1784 4.233
1785 4.233
1786 4.273
1787 4.273
1788 4.271
1789 4.271
1790 4.271
1791 4.275
1792 4.275
1793 4.271
1794 4.271
1795 4.270
1796 4.270
1797 4.275
1798 4.275
1799 4.275
1800 4.275
1801 4.264
1802 4.264
1803 4.264
1804 4.264
1805 4.270
1806 4.270
1807 4.270
1808 4.270
1809 4.270
1810 4.270
1811 4.180
1812 4.180
1813 4.270
1814 4.270
1815 4.233
1816 4.233
1817 4.272
1818 4.272
1819 4.273
1820 4.273
1821 4.271
1822 4.271
1823 4.271
1824 4.271
1825 4.271
1826 4.271
1827 4.271
1828 4.275
1829 4.275
1830 4.275
1831 4.275
1832 4.264
1833 4.264
1834 4.180
1835 4.180
1836 4.270
1837 4.270
1838 4.270
1839 4.270
1840 4.270
1841 4.270
1842 4.209
1843 4.209
1844 4.270
1845 4.270
1846 4.233
1847 4.233
1848 4.276
1849 4.276
1850 4.276
1851 4.276
1852 4.180
1853 4.180
1854 4.270
1855 4.270
1856 4.270
1857 4.270
1858 4.252
1859 4.252
1860 4.233
1861 4.233
1862 4.272
1863 4.272
1864 4.271
1865 4.271
1866 4.264
1867 4.264
1868 4.275
1869 4.275
1870 4.264
1871 4.264
1872 4.270
1873 4.270
1874 4.270
1875 4.271
1876 4.271
1877 4.276
1878 4.276
1879 4.276
1880 4.276
1881 4.270
1882 4.270
1883 4.271
1884 4.271
1885 4.275
1886 4.275
1887 4.271
1888 4.271
1889 4.273
1890 4.273
1891 4.273
1892 4.273
1893 4.275
1894 4.275
1895 4.270
1896 4.270
1897 4.270
1898 4.270
1899 4.270
1900 4.270
1901 4.276
1902 4.276
1903 4.180
1904 4.180
1905 4.276
1906 4.276
1907 4.270
1908 4.270
1909 4.270
1910 4.270
1911 4.270
1912 4.270
1913 4.270
1914 4.233
1915 4.233
1916 4.271
1917 4.271
1918 4.270
1919 4.270
1920 4.273
1921 4.273
1922 4.273
1923 4.273
1924 4.276
1925 4.276
1926 4.264
1927 4.264
1928 4.180
1929 4.180
1930 4.270
1931 4.270
1932 4.270
1933 4.270
1934 4.209
1935 4.209
1936 4.270
1937 4.270
1938 4.270
1939 4.270
1940 4.233
1941 4.233
1942 4.276
1943 4.276
1944 4.180
1945 4.180
1946 4.252
1947 4.252
1948 4.233
1949 4.233
1950 4.275
1951 4.275
1952 4.264
1953 4.264
1954 4.270
1955 4.270
1956 4.270
1957 4.273
1958 4.273
1959 4.271
1960 4.271
1961 4.271
1962 4.271
1963 4.275
1964 4.275
1965 4.264
1966 4.264
1967 4.270
1968 4.270
1969 4.271
1970 4.271
1971 4.270
1972 4.270
1973 4.270
1974 4.270
1975 4.273
1976 4.273
1977 4.275
1978 4.275
1979 4.273
1980 4.273
1981 4.271
1982 4.271
1983 4.271
1984 4.271
1985 4.275
1986 4.275
1987 4.270
1988 4.270
1989 4.270
1990 4.270
1991 4.270
1992 4.270
1993 4.276
1994 4.276
1995 4.276
1996 4.276
1997 4.270
1998 4.270
1999 4.270
2000 4.270
2001 4.270
2002 4.272
2003 4.272
2004 4.270
2005 4.270
2006 4.271
2007 4.271
2008 4.270
2009 4.270
2010 4.276
2011 4.276
2012 4.180
2013 4.180
2014 4.209
2015 4.209
2016 4.270
2017 4.270
2018 4.233
2019 4.233
2020 4.276
2021 4.276
2022 4.180
2023 4.180
2024 4.270
2025 4.270
2026 4.270
2027 4.270
2028 4.252
2029 4.252
2030 4.233
2031 4.233
2032 4.271
2033 4.271
2034 4.275
2035 4.275
2036 4.264
2037 4.264
2038 4.270
2039 4.270
2040 4.273
2041 4.273
2042 4.271
2043 4.271
2044 4.270
2045 4.270
2046 4.270
2047 4.264
2048 4.264
2049 4.180
2050 4.180
2051 4.180
2052 4.180
2053 4.209
2054 4.209
2055 4.209
2056 4.209
2057 4.271
2058 4.271
2059 4.233
2060 4.233
2061 4.233
2062 4.233
2063 4.180
2064 4.180
2065 4.270
2066 4.270
2067 4.270
2068 4.270
2069 4.270
2070 4.270
2071 4.252
2072 4.252
2073 4.252
2074 4.252
2075 4.233
2076 4.233
2077 4.273
2078 4.273
2079 4.275
2080 4.275
2081 4.264
2082 4.264
2083 4.264
2084 4.264
2085 4.271
2086 4.271
2087 4.273
2088 4.273
2089 4.275
2090 4.275
2091 4.264
2092 4.264
2093 4.271
2094 4.271
2095 4.271
2096 4.271
2097 4.270
2098 4.270
2099 4.270
2100 4.270
2101 4.180
2102 4.180
2103 4.180
2104 4.180
2105 4.276
2106 4.276
2107 4.270
2108 4.270
2109 4.270
2110 4.270
2111 4.233
2112 4.233
2113 4.233
2114 4.233
2115 4.272
2116 4.272
2117 4.275
2118 4.275
2119 4.275
2120 4.275
2121 4.271
2122 4.271
2123 4.275
2124 4.275
2125 4.270
2126 4.270
2127 4.276
2128 4.276
2129 4.264
2130 4.264
2131 4.264
2132 4.264
2133 4.270
2134 4.270
2135 4.270
2136 4.270
2137 4.270
2138 4.270
2139 4.276
2140 4.276
2141 4.180
2142 4.180
2143 4.276
2144 4.276
2145 4.276
2146 4.276
2147 4.270
2148 4.270
2149 4.233
2150 4.233
2151 4.271
2152 4.271
2153 4.275
2154 4.275
2155 4.271
2156 4.271
2157 4.275
2158 4.275
2159 4.275
2160 4.275
2161 4.270
2162 4.270
2163 4.276
2164 4.276
2165 4.276
2166 4.276
2167 4.264
2168 4.264
2169 4.180
2170 4.180
2171 4.270
2172 4.270
2173 4.270
2174 4.270
2175 4.209
2176 4.209
2177 4.233
2178 4.233
2179 4.276
2180 4.276
2181 4.270
2182 4.270
2183 4.252
2184 4.252
2185 4.273
2186 4.273
2187 4.275
2188 4.275
2189 4.275
2190 4.275
2191 4.264
2192 4.264
2193 4.271
2194 4.271
2195 4.273
2196 4.273
2197 4.275
2198 4.275
2199 4.270
2200 4.270
2201 4.271
2202 4.271
2203 4.276
2204 4.276
2205 4.276
2206 4.276
2207 4.180
2208 4.180
2209 4.270
2210 4.270
2211 4.233
2212 4.233
2213 4.272
2214 4.272
2215 4.273
2216 4.273
2217 4.273
2218 4.273
2219 4.275
2220 4.275
2221 4.270
2222 4.270
2223 4.273
2224 4.273
2225 4.264
2226 4.264
2227 4.270
2228 4.270
2229 4.270
2230 4.270
2231 4.270
2232 4.270
2233 4.270
2234 4.270
2235 4.276
2236 4.276
2237 4.180
2238 4.180
2239 4.276
2240 4.276
2241 4.270
2242 4.270
2243 4.233
2244 4.233
2245 4.272
2246 4.272
2247 4.272
2248 4.272
2249 4.271
2250 4.271
2251 4.273
2252 4.273
2253 4.273
2254 4.273
2255 4.271
2256 4.271
2257 4.275
2258 4.275
2259 4.276
2260 4.276
2261 4.264
2262 4.264
2263 4.270
2264 4.270
2265 4.270
2266 4.270
2267 4.270
2268 4.270
2269 4.270
2270 4.270
2271 4.271
2272 4.271
2273 4.271
2274 4.271
2275 4.275
2276 4.275
2277 4.271
2278 4.271
2279 4.273
2280 4.273
2281 4.271
2282 4.271
2283 4.275
2284 4.275
2285 4.180
2286 4.270
2287 4.270
2288 4.209
2289 4.270
2290 4.270
2291 4.233
2292 4.276
2293 4.276
2294 4.180
2295 4.180
2296 4.180
2297 4.180
2298 4.252
2299 4.233
2300 4.233
2301 4.233
2302 4.233
2303 4.273
2304 4.273
2305 4.264
2306 4.271
2307 4.271
2308 4.271
2309 4.271
2310 4.270
2311 4.270
2312 4.271
2313 4.271
2314 4.271
2315 4.271
2316 4.270
2317 4.270
2318 4.264
2319 4.264
2320 4.264
2321 4.264
2322 4.180
2323 4.180
2324 4.270
2325 4.270
2326 4.270
2327 4.270
2328 4.209
2329 4.209
2330 4.271
2331 4.270
2332 4.270
2333 4.233
2334 4.233
2335 4.276
2336 4.276
2337 4.180
2338 4.180
2339 4.270
2340 4.270
2341 4.252
2342 4.252
2343 4.233
2344 4.233
2345 4.272
2346 4.272
2347 4.275
2348 4.264
2349 4.264
2350 4.273
2351 4.273
2352 4.271
2353 4.271
2354 4.275
2355 4.275
2356 4.275
2357 4.275
2358 4.264
2359 4.264
2360 4.180
2361 4.180
2362 4.270
2363 4.270
2364 4.270
2365 4.270
2366 4.209
2367 4.209
2368 4.271
2369 4.271
2370 4.233
2371 4.233
2372 4.276
2373 4.270
2374 4.270
2375 4.270
2376 4.270
2377 4.270
2378 4.270
2379 4.252
2380 4.252
2381 4.271
2382 4.271
2383 4.275
2384 4.275
2385 4.264
2386 4.264
2387 4.273
2388 4.273
2389 4.275
2390 4.275
2391 4.276
2392 4.271
2393 4.271
2394 4.270
2395 4.270
2396 4.276
2397 4.276
2398 4.276
2399 4.276
2400 4.276
2401 4.276
2402 4.270
2403 4.270
2404 4.270
2405 4.270
2406 4.270
2407 4.270
2408 4.270
2409 4.270
2410 4.275
2411 4.275
2412 4.275
2413 4.271
2414 4.271
2415 4.270
2416 4.270
2417 4.271
2418 4.271
2419 4.270
2420 4.270
2421 4.276
2422 4.276
2423 4.270
2424 4.270
2425 4.270
2426 4.270
2427 4.276
2428 4.276
2429 4.180
2430 4.180
2431 4.180
2432 4.180
2433 4.276
2434 4.276
2435 4.270
2436 4.270
2437 4.233
2438 4.233
2439 4.233
2440 4.233
2441 4.273
2442 4.275
2443 4.275
2444 4.270
2445 4.270
2446 4.270
2447 4.270
2448 4.273
2449 4.273
2450 4.273
2451 4.273
2452 4.271
2453 4.271
2454 4.276
2455 4.276
2456 4.264
2457 4.264
2458 4.264
2459 4.264
2460 4.270
2461 4.270
2462 4.270
2463 4.270
2464 4.270
2465 4.270
2466 4.272
2467 4.273
2468 4.273
2469 4.275
2470 4.275
2471 4.273
2472 4.273
2473 4.275
2474 4.275
2475 4.275
2476 4.275
2477 4.270
2478 4.270
2479 4.270
2480 4.270
2481 4.180
2482 4.180
2483 4.270
2484 4.270
2485 4.270
2486 4.270
2487 4.270
2488 4.270
2489 4.270
2490 4.270
2491 4.233
2492 4.233
2493 4.272
2494 4.272
2495 4.273
2496 4.273
2497 4.271
2498 4.271
2499 4.271
2500 4.271
2501 4.271
2502 4.270
2503 4.270
2504 4.264
2505 4.264
2506 4.270
2507 4.270
2508 4.270
2509 4.270
2510 4.276
2511 4.276
2512 4.276
2513 4.276
2514 4.180
2515 4.180
2516 4.270
2517 4.270
2518 4.233
2519 4.233
2520 4.272
2521 4.272
2522 4.271
2523 4.271
2524 4.271
2525 4.270
2526 4.270
2527 4.271
2528 4.271
2529 4.275
2530 4.275
2531 4.270
2532 4.270
2533 4.270
2534 4.270
2535 4.264
2536 4.264
2537 4.180
2538 4.180
2539 4.209
2540 4.209
2541 4.270
2542 4.270
2543 4.233
2544 4.233
2545 4.252
2546 4.252
2547 4.271
2548 4.271
2549 4.264
2550 4.264
2551 4.271
2552 4.271
2553 4.273
2554 4.273
2555 4.273
2556 4.273
2557 4.275
2558 4.275
2559 4.180
2560 4.180
2561 4.270
2562 4.270
2563 4.270
2564 4.209
2565 4.209
2566 4.271
2567 4.271
2568 4.270
2569 4.270
2570 4.270
2571 4.270
2572 4.233
2573 4.233
2574 4.276
2575 4.276
2576 4.180
2577 4.180
2578 4.180
2579 4.180
2580 4.180
2581 4.180
2582 4.270
2583 4.270
2584 4.270
2585 4.270
2586 4.270
2587 4.270
2588 4.252
2589 4.252
2590 4.233
2591 4.233
2592 4.233
2593 4.233
2594 4.233
2595 4.233
2596 4.275
2597 4.275
2598 4.264
2599 4.264
2600 4.271
2601 4.271
2602 4.264
2603 4.264
2604 4.264
2605 4.264
2606 4.264
2607 4.264
2608 4.180
2609 4.180
2610 4.270
2611 4.270
2612 4.270
2613 4.270
2614 4.209
2615 4.209
2616 4.271
2617 4.271
2618 4.270
2619 4.270
2620 4.233
2621 4.233
2622 4.276
2623 4.276
2624 4.276
2625 4.276
2626 4.270
2627 4.270
2628 4.270
2629 4.252
2630 4.252
2631 4.275
2632 4.275
2633 4.264
2634 4.264
2635 4.273
2636 4.273
2637 4.271
2638 4.271
2639 4.271
2640 4.271
2641 4.275
2642 4.275
2643 4.275
2644 4.275
2645 4.275
2646 4.275
2647 4.270
2648 4.270
2649 4.276
2650 4.276
2651 4.270
2652 4.270
2653 4.271
2654 4.271
2655 4.180
2656 4.180
2657 4.276
2658 4.276
2659 4.270
2660 4.270
2661 4.233
2662 4.233
2663 4.275
2664 4.275
2665 4.275
2666 4.275
2667 4.270
2668 4.273
2669 4.273
2670 4.276
2671 4.276
2672 4.264
2673 4.264
2674 4.270
2675 4.270
2676 4.270
2677 4.270
2678 4.270
2679 4.270
2680 4.276
2681 4.276
2682 4.276
2683 4.276
2684 4.276
2685 4.276
2686 4.180
2687 4.180
2688 4.276
2689 4.276
2690 4.270
2691 4.270
2692 4.233
2693 4.233
2694 4.273
2695 4.273
2696 4.275
2697 4.275
2698 4.270
2699 4.270
2700 4.271
2701 4.271
2702 4.275
2703 4.275
2704 4.276
2705 4.276
2706 4.264
2707 4.264
2708 4.180
2709 4.180
2710 4.180
2711 4.180
2712 4.270
2713 4.270
2714 4.209
2715 4.209
2716 4.209
2717 4.209
2718 4.270
2719 4.270
2720 4.233
2721 4.233
2722 4.233
2723 4.233
2724 4.270
2725 4.270
2726 4.270
2727 4.270
2728 4.270
2729 4.252
2730 4.252
2731 4.252
2732 4.252
2733 4.272
2734 4.272
2735 4.273
2736 4.273
2737 4.275
2738 4.275
2739 4.264
2740 4.264
2741 4.264
2742 4.264
2743 4.270
2744 4.270
2745 4.273
2746 4.273
2747 4.273
2748 4.273
2749 4.273
2750 4.273
2751 4.271
2752 4.271
2753 4.275
2754 4.275
2755 4.271
2756 4.271
2757 4.271
2758 4.271
2759 4.276
2760 4.276
2761 4.270
2762 4.270
2763 4.272
2764 4.272
2765 4.273
2766 4.273
2767 4.271
2768 4.271
2769 4.275
2770 4.275
2771 4.275
2772 4.275
2773 4.270
2774 4.270
2775 4.270
2776 4.270
2777 4.270
2778 4.276
2779 4.276
2780 4.180
2781 4.180
2782 4.276
2783 4.276
2784 4.276
2785 4.276
2786 4.270
2787 4.270
2788 4.270
2789 4.270
2790 4.233
2791 4.233
2792 4.272
2793 4.272
2794 4.271
2795 4.271
2796 4.271
2797 4.271
2798 4.273
2799 4.273
2800 4.271
2801 4.271
2802 4.271
2803 4.271
2804 4.271
2805 4.271
2806 4.270
2807 4.270
2808 4.276
2809 4.276
2810 4.276
2811 4.276
2812 4.264
2813 4.264
2814 4.270
2815 4.270
2816 4.270
2817 4.270
2818 4.270
2819 4.270
2820 4.180
2821 4.180
2822 4.270
2823 4.270
2824 4.233
2825 4.233
2826 4.271
2827 4.271
2828 4.275
2829 4.275
2830 4.275
2831 4.275
2832 4.271
2833 4.271
2834 4.273
2835 4.273
2836 4.275
2837 4.275
2838 4.270
2839 4.270
2840 4.264
2841 4.264
2842 4.180
2843 4.180
2844 4.270
2845 4.270
2846 4.209
2847 4.209
2848 4.233
2849 4.233
2850 4.252
2851 4.252
2852 4.273
2853 4.273
2854 4.273
2855 4.273
2856 4.264
2857 4.264
2858 4.271
2859 4.271
2860 4.271
2861 4.271
2862 4.275
2863 4.275
2864 4.180
2865 4.180
2866 4.270
2867 4.270
2868 4.270
2869 4.270
2870 4.209
2871 4.209
2872 4.271
2873 4.271
2874 4.233
2875 4.233
2876 4.276
2877 4.276
2878 4.180
2879 4.180
2880 4.270
2881 4.270
2882 4.270
2883 4.270
2884 4.270
2885 4.270
2886 4.270
2887 4.270
2888 4.252
2889 4.252
2890 4.233
2891 4.233
2892 4.272
2893 4.272
2894 4.272
2895 4.272
2896 4.275
2897 4.275
2898 4.264
2899 4.264
2900 4.271
2901 4.271
2902 4.264
2903 4.264
2904 4.270
2905 4.270
2906 4.270
2907 4.270
2908 4.271
2909 4.271
2910 4.270
2911 4.270
2912 4.270
2913 4.270
2914 4.276
2915 4.276
2916 4.180
2917 4.180
2918 4.180
2919 4.180
2920 4.276
2921 4.276
2922 4.270
2923 4.270
2924 4.233
2925 4.233
2926 4.233
2927 4.233
2928 4.271
2929 4.271
2930 4.271
2931 4.271
2932 4.275
2933 4.275
2934 4.270
2935 4.270
2936 4.273
2937 4.273
2938 4.275
2939 4.275
2940 4.276
2941 4.276
2942 4.264
2943 4.264
2944 4.264
2945 4.264
2946 4.180
2947 4.180
2948 4.276
2949 4.276
2950 4.270
2951 4.270
2952 4.270
2953 4.270
2954 4.233
2955 4.233
2956 4.275
2957 4.275
2958 4.271
2959 4.271
2960 4.271
2961 4.271
2962 4.270
2963 4.270
2964 4.273
2965 4.273
2966 4.275
2967 4.275
2968 4.275
2969 4.275
2970 4.276
2971 4.276
2972 4.264
2973 4.264
2974 4.270
2975 4.270
2976 4.270
2977 4.270
2978 4.270
2979 4.270
2980 4.270
2981 4.270
2982 4.276
2983 4.276
2984 4.180
2985 4.180
2986 4.270
2987 4.270
2988 4.270
2989 4.270
2990 4.233
2991 4.233
2992 4.273
2993 4.273
2994 4.275
2995 4.275
2996 4.270
2997 4.270
2998 4.271
2999 4.271
3000 4.275
3001 4.275
3002 4.264
3003 4.264
3004 4.270
3005 4.270
3006 4.270
3007 4.270
3008 4.270
3009 4.270
3010 4.276
3011 4.276
3012 4.276
3013 4.276
3014 4.180
3015 4.180
3016 4.180
3017 4.180
3018 4.270
3019 4.270
3020 4.233
3021 4.233
3022 4.233
3023 4.233
3024 4.272
3025 4.272
3026 4.273
3027 4.273
3028 4.273
3029 4.273
3030 4.271
3031 4.271
3032 4.275
3033 4.275
3034 4.270
3035 4.270
3036 4.264
3037 4.264
3038 4.264
3039 4.264
3040 4.270
3041 4.270
3042 4.276
3043 4.276
3044 4.270
3045 4.270
3046 4.270
3047 4.270
3048 4.270
3049 4.270
3050 4.272
3051 4.272
3052 4.271
3053 4.271
3054 4.273
3055 4.273
3056 4.273
3057 4.273
3058 4.275
3059 4.275
3060 4.275
3061 4.275
3062 4.270
3063 4.270
3064 4.270
3065 4.270
3066 4.270
3067 4.270
3068 4.270
3069 4.270
3070 4.270
3071 4.270
3072 4.276
3073 4.276
3074 4.270
3075 4.270
3076 4.271
3077 4.271
3078 4.271
3079 4.271
3080 4.270
3081 4.270
3082 4.270
3083 4.270
3084 4.273
3085 4.273
3086 4.271
3087 4.271
3088 4.270
3089 4.270
3090 4.180
3091 4.180
3092 4.209
3093 4.209
3094 4.233
3095 4.233
3096 4.276
3097 4.276
3098 4.276
3099 4.276
3100 4.180
3101 4.180
3102 4.270
3103 4.270
3104 4.252
3105 4.252
3106 4.233
3107 4.233
3108 4.264
3109 4.264
3110 4.271
3111 4.271
3112 4.273
3113 4.273
3114 4.271
3115 4.271
3116 4.271
3117 4.271
3118 4.264
3119 4.264
3120 4.180
3121 4.270
3122 4.270
3123 4.209
3124 4.271
3125 4.271
3126 4.270
3127 4.270
3128 4.233
3129 4.270
3130 4.270
3131 4.270
3132 4.270
3133 4.252
3134 4.275
3135 4.275
3136 4.264
3137 4.273
3138 4.273
3139 4.273
3140 4.273
3141 4.271
3142 4.271
3143 4.275
3144 4.275
3145 4.270
3146 4.270
3147 4.270
3148 4.270
3149 4.271
3150 4.270
3151 4.270
3152 4.180
3153 4.180
3154 4.276
3155 4.276
3156 4.270
3157 4.270
3158 4.270
3159 4.270
3160 4.233
3161 4.233
3162 4.275
3163 4.271
3164 4.271
3165 4.270
3166 4.270
3167 4.270
3168 4.270
3169 4.276
3170 4.276
3171 4.264
3172 4.264
3173 4.180
3174 4.180
3175 4.180
3176 4.180
3177 4.270
3178 4.270
3179 4.209
3180 4.209
3181 4.209
3182 4.209
3183 4.233
3184 4.233
3185 4.233
3186 4.233
3187 4.276
3188 4.276
3189 4.180
3190 4.180
3191 4.276
3192 4.270
3193 4.270
3194 4.270
3195 4.270
3196 4.270
3197 4.270
3198 4.252
3199 4.252
3200 4.252
3201 4.252
3202 4.233
3203 4.233
3204 4.275
3205 4.275
3206 4.264
3207 4.264
3208 4.264
3209 4.264
3210 4.270
3211 4.270
3212 4.271
3213 4.271
3214 4.271
3215 4.271
3216 4.275
3217 4.275
3218 4.276
3219 4.264
3220 4.264
3221 4.180
3222 4.180
3223 4.209
3224 4.209
3225 4.271
3226 4.271
3227 4.271
3228 4.271
3229 4.233
3230 4.233
3231 4.180
3232 4.180
3233 4.270
3234 4.270
3235 4.252
3236 4.252
3237 4.233
3238 4.233
3239 4.273
3240 4.273
3241 4.275
3242 4.275
3243 4.275
3244 4.275
3245 4.275
3246 4.264
3247 4.264
3248 4.270
3249 4.270
3250 4.273
3251 4.273
3252 4.275
3253 4.275
3254 4.264
3255 4.264
3256 4.270
3257 4.270
3258 4.271
3259 4.271
3260 4.270
3261 4.270
3262 4.276
3263 4.276
3264 4.180
3265 4.180
3266 4.276
3267 4.276
3268 4.276
3269 4.276
3270 4.270
3271 4.270
3272 4.270
3273 4.270
3274 4.233
3275 4.233
3276 4.272
3277 4.272
3278 4.273
3279 4.275
3280 4.275
3281 4.275
3282 4.275
3283 4.276
3284 4.276
3285 4.276
3286 4.276
3287 4.264
3288 4.264
3289 4.270
3290 4.270
3291 4.270
3292 4.270
3293 4.270
3294 4.270
3295 4.276
3296 4.276
3297 4.276
3298 4.276
3299 4.270
3300 4.270
3301 4.270
3302 4.270
3303 4.270
3304 4.270
3305 4.272
3306 4.271
3307 4.271
3308 4.275
3309 4.275
3310 4.275
3311 4.275
3312 4.273
3313 4.273
3314 4.271
3315 4.271
3316 4.275
3317 4.275
3318 4.270
3319 4.270
3320 4.276
3321 4.276
3322 4.180
3323 4.180
3324 4.270
3325 4.270
3326 4.209
3327 4.209
3328 4.233
3329 4.233
3330 4.276
3331 4.276
3332 4.252
3333 4.252
3334 4.273
3335 4.273
3336 4.273
3337 4.273
3338 4.271
3339 4.275
3340 4.275
3341 4.264
3342 4.264
3343 4.271
3344 4.271
3345 4.273
3346 4.273
3347 4.270
3348 4.270
3349 4.270
3350 4.270
3351 4.271
3352 4.271
3353 4.270
3354 4.270
3355 4.276
3356 4.276
3357 4.180
3358 4.180
3359 4.233
3360 4.233
3361 4.272
3362 4.272
3363 4.272
3364 4.272
3365 4.273
3366 4.273
3367 4.275
3368 4.275
3369 4.271
3370 4.273
3371 4.273
3372 4.271
3373 4.271
3374 4.264
3375 4.264
3376 4.180
3377 4.180
3378 4.270
3379 4.270
3380 4.270
3381 4.270
3382 4.270
3383 4.270
3384 4.209
3385 4.209
3386 4.270
3387 4.270
3388 4.270
3389 4.270
3390 4.233
3391 4.233
3392 4.180
3393 4.180
3394 4.180
3395 4.180
3396 4.180
3397 4.180
3398 4.276
3399 4.276
3400 4.270
3401 4.270
3402 4.252
3403 4.252
3404 4.233
3405 4.233
3406 4.233
3407 4.233
3408 4.233
3409 4.233
3410 4.272
3411 4.272
3412 4.271
3413 4.271
3414 4.271
3415 4.271
3416 4.264
3417 4.264
3418 4.273
3419 4.273
3420 4.271
3421 4.271
3422 4.275
3423 4.275
3424 4.276
3425 4.276
3426 4.264
3427 4.264
3428 4.264
3429 4.264
3430 4.264
3431 4.264
3432 4.270
3433 4.271
3434 4.271
3435 4.270
3436 4.270
3437 4.270
3438 4.270
3439 4.271
3440 4.271
3441 4.275
3442 4.275
3443 4.275
3444 4.275
3445 4.271
3446 4.271
3447 4.271
3448 4.271
3449 4.271
3450 4.271
3451 4.275
3452 4.275
3453 4.275
3454 4.275
3455 4.275
3456 4.275
3457 4.270
3458 4.270
3459 4.276
3460 4.276
3461 4.180
3462 4.180
3463 4.276
3464 4.276
3465 4.270
3466 4.270
3467 4.270
3468 4.233
3469 4.233
3470 4.273
3471 4.273
3472 4.271
3473 4.271
3474 4.270
3475 4.270
3476 4.271
3477 4.271
3478 4.276
3479 4.276
3480 4.264
3481 4.264
3482 4.180
3483 4.180
3484 4.270
3485 4.270
3486 4.270
3487 4.270
3488 4.270
3489 4.270
3490 4.209
3491 4.209
3492 4.270
3493 4.270
3494 4.270
3495 4.270
3496 4.233
3497 4.233
3498 4.276
3499 4.276
3500 4.276
3501 4.276
3502 4.276
3503 4.276
3504 4.270
3505 4.270
3506 4.252
3507 4.252
3508 4.272
3509 4.272
3510 4.275
3511 4.275
3512 4.264
3513 4.264
3514 4.270
3515 4.273
3516 4.273
3517 4.275
3518 4.275
3519 4.270
3520 4.270
3521 4.271
3522 4.271
3523 4.180
3524 4.180
3525 4.270
3526 4.270
3527 4.270
3528 4.270
3529 4.270
3530 4.270
3531 4.270
3532 4.270
3533 4.233
3534 4.233
3535 4.273
3536 4.273
3537 4.271
3538 4.271
3539 4.275
3540 4.275
3541 4.273
3542 4.273
3543 4.273
3544 4.273
3545 4.273
3546 4.273
3547 4.264
3548 4.264
3549 4.270
3550 4.270
3551 4.276
3552 4.276
3553 4.180
3554 4.180
3555 4.180
3556 4.180
3557 4.276
3558 4.276
3559 4.270
3560 4.270
3561 4.270
3562 4.270
3563 4.270
3564 4.233
3565 4.233
3566 4.233
3567 4.233
3568 4.272
3569 4.272
3570 4.271
3571 4.271
3572 4.270
3573 4.270
3574 4.270
3575 4.270
3576 4.271
3577 4.271
3578 4.275
3579 4.275
3580 4.270
3581 4.270
3582 4.276
3583 4.276
3584 4.264
3585 4.264
3586 4.264
3587 4.264
3588 4.270
3589 4.270
3590 4.270
3591 4.270
3592 4.180
3593 4.180
3594 4.233
3595 4.233
3596 4.271
3597 4.271
3598 4.275
3599 4.275
3600 4.270
3601 4.270
3602 4.273
3603 4.273
3604 4.271
3605 4.271
3606 4.271
3607 4.271
3608 4.271
3609 4.271
3610 4.275
3611 4.275
3612 4.275
3613 4.275
3614 4.270
3615 4.264
3616 4.264
3617 4.180
3618 4.180
3619 4.270
3620 4.270
3621 4.270
3622 4.270
3623 4.209
3624 4.209
3625 4.233
3626 4.233
3627 4.276
3628 4.276
3629 4.270
3630 4.270
3631 4.270
3632 4.270
3633 4.252
3634 4.252
3635 4.273
3636 4.273
3637 4.264
3638 4.264
3639 4.271
3640 4.271
3641 4.275
3642 4.275
3643 4.270
3644 4.270
3645 4.271
3646 4.271
3647 4.270
3648 4.270
3649 4.276
3650 4.276
3651 4.276
3652 4.276
3653 4.180
3654 4.180
3655 4.270
3656 4.270
3657 4.270
3658 4.270
3659 4.270
3660 4.270
3661 4.233
3662 4.233
3663 4.272
3664 4.272
3665 4.275
3666 4.275
3667 4.273
3668 4.273
3669 4.271
3670 4.271
3671 4.270
3672 4.270
3673 4.270
3674 4.270
3675 4.264
3676 4.264
3677 4.270
3678 4.270
3679 4.270
3680 4.270
3681 4.276
3682 4.276
3683 4.180
3684 4.180
3685 4.276
3686 4.276
3687 4.270
3688 4.270
3689 4.270
3690 4.270
3691 4.270
3692 4.270
3693 4.233
3694 4.233
3695 4.271
3696 4.271
3697 4.270
3698 4.270
3699 4.273
3700 4.273
3701 4.273
3702 4.273
3703 4.275
3704 4.275
3705 4.270
3706 4.270
3707 4.276
3708 4.276
3709 4.264
3710 4.264
3711 4.180
3712 4.180
3713 4.209
3714 4.209
3715 4.270
3716 4.270
3717 4.233
3718 4.233
3719 4.270
3720 4.270
3721 4.252
3722 4.252
3723 4.275
3724 4.275
3725 4.264
3726 4.264
3727 4.271
3728 4.271
3729 4.273
3730 4.273
3731 4.271
3732 4.271
3733 4.275
3734 4.275
3735 4.180
3736 4.180
3737 4.270
3738 4.270
3739 4.209
3740 4.209
3741 4.271
3742 4.271
3743 4.270
3744 4.270
3745 4.233
3746 4.233
3747 4.276
3748 4.276
3749 4.270
3750 4.270
3751 4.270
3752 4.270
3753 4.252
3754 4.252
3755 4.273
3756 4.273
3757 4.275
3758 4.275
3759 4.264
3760 4.264
3761 4.270
3762 4.270
3763 4.271
3764 4.271
3765 4.271
3766 4.271
3767 4.270
3768 4.270
3769 4.270
3770 4.270
3771 4.270
3772 4.270
3773 4.270
3774 4.270
3775 4.271
3776 4.271
3777 4.276
3778 4.276
3779 4.276
3780 4.276
3781 4.272
3782 4.272
3783 4.275
3784 4.275
3785 4.273
3786 4.273
3787 4.271
3788 4.271
3789 4.270
3790 4.270
3791 4.276
3792 4.276
3793 4.180
3794 4.180
3795 4.276
3796 4.276
3797 4.270
3798 4.270
3799 4.270
3800 4.270
3801 4.270
3802 4.270
3803 4.233
3804 4.233
3805 4.271
3806 4.271
3807 4.275
3808 4.275
3809 4.273
3810 4.273
3811 4.276
3812 4.276
3813 4.264
3814 4.264
3815 4.270
3816 4.270
3817 4.270
3818 4.270
3819 4.180
3820 4.180
3821 4.180
3822 4.180
3823 4.270
3824 4.270
3825 4.270
3826 4.270
3827 4.233
3828 4.233
3829 4.233
3830 4.233
3831 4.273
3832 4.273
3833 4.275
3834 4.275
3835 4.271
3836 4.271
3837 4.270
3838 4.270
3839 4.271
3840 4.271
3841 4.275
3842 4.275
3843 4.270
3844 4.270
3845 4.264
3846 4.264
3847 4.264
3848 4.264
3849 4.180
3850 4.180
3851 4.209
3852 4.209
3853 4.270
3854 4.270
3855 4.270
3856 4.270
3857 4.270
3858 4.270
3859 4.233
3860 4.233
3861 4.180
3862 4.180
3863 4.180
3864 4.180
3865 4.270
3866 4.270
3867 4.252
3868 4.252
3869 4.233
3870 4.233
3871 4.233
3872 4.233
3873 4.272
3874 4.272
3875 4.273
3876 4.273
3877 4.264
3878 4.264
3879 4.271
3880 4.271
3881 4.275
3882 4.275
3883 4.275
3884 4.275
3885 4.264
3886 4.264
3887 4.264
3888 4.264
3889 4.180
3890 4.180
3891 4.270
3892 4.270
3893 4.270
3894 4.270
3895 4.209
3896 4.209
3897 4.271
3898 4.271
3899 4.233
3900 4.233
3901 4.276
3902 4.276
3903 4.270
3904 4.270
3905 4.252
3906 4.252
3907 4.272
3908 4.272
3909 4.271
3910 4.271
3911 4.275
3912 4.275
3913 4.264
3914 4.264
3915 4.275
3916 4.275
3917 4.275
3918 4.275
3919 4.270
3920 4.270
3921 4.270
3922 4.270
3923 4.271
3924 4.271
3925 4.270
3926 4.270
3927 4.276
3928 4.276
3929 4.276
3930 4.276
3931 4.180
3932 4.180
3933 4.180
3934 4.180
3935 4.276
3936 4.276
3937 4.270
3938 4.270
3939 4.270
3940 4.270
3941 4.233
3942 4.233
3943 4.233
3944 4.233
3945 4.271
3946 4.271
3947 4.275
3948 4.275
3949 4.271
3950 4.271
3951 4.273
3952 4.273
3953 4.270
3954 4.270
3955 4.276
3956 4.276
3957 4.264
3958 4.264
3959 4.264
3960 4.264
3961 4.270
3962 4.270
3963 4.276
3964 4.276
3965 4.276
3966 4.276
3967 4.276
3968 4.276
3969 4.270
3970 4.270
3971 4.275
3972 4.275
3973 4.271
3974 4.271
3975 4.270
3976 4.270
3977 4.273
3978 4.273
3979 4.273
3980 4.273
3981 4.275
3982 4.275
3983 4.275
3984 4.275
3985 4.276
3986 4.276
3987 4.180
3988 4.180
3989 4.180
3990 4.180
3991 4.270
3992 4.270
3993 4.209
3994 4.209
3995 4.209
3996 4.209
3997 4.270
3998 4.270
3999 4.233
4000 4.233
4001 4.233
4002 4.233
4003 4.252
4004 4.252
4005 4.252
4006 4.252
4007 4.273
4008 4.273
4009 4.275
4010 4.275
4011 4.264
4012 4.264
4013 4.264
4014 4.264
4015 4.273
4016 4.273
4017 4.273
4018 4.273
4019 4.271
4020 4.271
4021 4.270
4022 4.270
4023 4.270
4024 4.270
4025 4.271
4026 4.271
4027 4.271
4028 4.271
4029 4.270
4030 4.270
4031 4.270
4032 4.270
4033 4.276
4034 4.276
4035 4.276
4036 4.276
4037 4.180
4038 4.180
4039 4.180
4040 4.180
4041 4.270
4042 4.270
4043 4.270
4044 4.270
4045 4.233
4046 4.233
4047 4.233
4048 4.233
4049 4.272
4050 4.272
4051 4.273
4052 4.273
4053 4.275
4054 4.275
4055 4.275
4056 4.275
4057 4.271
4058 4.271
4059 4.271
4060 4.271
4061 4.264
4062 4.264
4063 4.264
4064 4.264
4065 4.270
4066 4.270
4067 4.270
4068 4.270
4069 4.180
4070 4.180
4071 4.276
4072 4.276
4073 4.276
4074 4.276
4075 4.270
4076 4.270
4077 4.233
4078 4.233
4079 4.272
4080 4.272
4081 4.271
4082 4.271
4083 4.270
4084 4.270
4085 4.273
4086 4.273
4087 4.273
4088 4.273
4089 4.271
4090 4.271
4091 4.271
4092 4.271
4093 4.275
4094 4.275
4095 4.275
4096 4.275
4097 4.270
4098 4.270
4099 4.276
4100 4.276
4101 4.276
4102 4.276
4103 4.264
4104 4.264
4105 4.180
4106 4.209
4107 4.233
4108 4.270
4109 4.270
4110 4.252
4111 4.271
4112 4.271
4113 4.275
4114 4.275
4115 4.275
4116 4.275
4117 4.264
4118 4.271
4119 4.271
4120 4.270
4121 4.270
4122 4.275
4123 4.275
4124 4.271
4125 4.270
4126 4.270
4127 4.276
4128 4.276
4129 4.276
4130 4.276
4131 4.270
4132 4.270
4133 4.270
4134 4.270
4135 4.270
4136 4.270
4137 4.273
4138 4.273
4139 4.273
4140 4.273
4141 4.275
4142 4.271
4143 4.271
4144 4.271
4145 4.271
4146 4.271
4147 4.271
4148 4.180
4149 4.180
4150 4.180
4151 4.180
4152 4.270
4153 4.270
4154 4.209
4155 4.209
4156 4.209
4157 4.209
4158 4.270
4159 4.270
4160 4.233
4161 4.233
4162 4.233
4163 4.233
4164 4.276
4165 4.276
4166 4.180
4167 4.180
4168 4.276
4169 4.270
4170 4.270
4171 4.270
4172 4.270
4173 4.270
4174 4.270
4175 4.252
4176 4.252
4177 4.252
4178 4.252
4179 4.233
4180 4.233
4181 4.272
4182 4.272
4183 4.272
4184 4.272
4185 4.264
4186 4.264
4187 4.264
4188 4.264
4189 4.273
4190 4.273
4191 4.273
4192 4.273
4193 4.270
4194 4.270
4195 4.276
4196 4.264
4197 4.264
4198 4.270
4199 4.270
4200 4.270
4201 4.270
4202 4.271
4203 4.271
4204 4.271
4205 4.271
4206 4.270
4207 4.270
4208 4.271
4209 4.271
4210 4.271
4211 4.271
4212 4.275
4213 4.275
4214 4.275
4215 4.275
4216 4.275
4217 4.273
4218 4.273
4219 4.275
4220 4.275
4221 4.270
4222 4.270
4223 4.270
4224 4.270
4225 4.270
4226 4.270
4227 4.180
4228 4.180
4229 4.276
4230 4.276
4231 4.276
4232 4.276
4233 4.270
4234 4.270
4235 4.270
4236 4.270
4237 4.270
4238 4.270
4239 4.233
4240 4.233
4241 4.273
4242 4.271
4243 4.271
4244 4.271
4245 4.271
4246 4.270
4247 4.270
4248 4.271
4249 4.271
4250 4.271
4251 4.271
4252 4.276
4253 4.276
4254 4.276
4255 4.276
4256 4.264
4257 4.264
4258 4.270
4259 4.270
4260 4.270
4261 4.270
4262 4.276
4263 4.276
4264 4.180
4265 4.180
4266 4.180
4267 4.180
4268 4.233
4269 4.233
4270 4.233
4271 4.233
4272 4.272
4273 4.275
4274 4.275
4275 4.275
4276 4.275
4277 4.270
4278 4.270
4279 4.271
4280 4.271
4281 4.275
4282 4.275
4283 4.264
4284 4.264
4285 4.264
4286 4.264
4287 4.270
4288 4.270
4289 4.270
4290 4.270
4291 4.270
4292 4.270
4293 4.270
4294 4.270
4295 4.273
4296 4.273
4297 4.273
4298 4.273
4299 4.271
4300 4.273
4301 4.273
4302 4.275
4303 4.275
4304 4.275
4305 4.275
4306 4.270
4307 4.270
4308 4.270
4309 4.270
4310 4.270
4311 4.270
4312 4.270
4313 4.270
4314 4.276
4315 4.276
4316 4.180
4317 4.180
4318 4.270
4319 4.270
4320 4.270
4321 4.270
4322 4.270
4323 4.270
4324 4.270
4325 4.270
4326 4.270
4327 4.270
4328 4.233
4329 4.233
4330 4.272
4331 4.272
4332 4.272
4333 4.272
4334 4.271
4335 4.270
4336 4.270
4337 4.264
4338 4.264
4339 4.180
4340 4.180
4341 4.209
4342 4.209
4343 4.270
4344 4.270
4345 4.270
4346 4.270
4347 4.233
4348 4.233
4349 4.276
4350 4.276
4351 4.276
4352 4.276
4353 4.180
4354 4.180
4355 4.180
4356 4.180
4357 4.270
4358 4.270
4359 4.252
4360 4.252
4361 4.233
4362 4.233
4363 4.233
4364 4.233
4365 4.271
4366 4.271
4367 4.271
4368 4.271
4369 4.264
4370 4.264
4371 4.270
4372 4.270
4373 4.270
4374 4.270
4375 4.273
4376 4.273
4377 4.271
4378 4.271
4379 4.275
4380 4.275
4381 4.270
4382 4.270
4383 4.264
4384 4.264
4385 4.264
4386 4.264
4387 4.180
4388 4.180
4389 4.270
4390 4.209
4391 4.209
4392 4.271
4393 4.271
4394 4.233
4395 4.233
4396 4.180
4397 4.180
4398 4.252
4399 4.252
4400 4.233
4401 4.233
4402 4.275
4403 4.275
4404 4.264
4405 4.264
4406 4.271
4407 4.271
4408 4.271
4409 4.271
4410 4.273
4411 4.273
4412 4.273
4413 4.273
4414 4.275
4415 4.275
4416 4.275
4417 4.275
4418 4.264
4419 4.264
4420 4.270
4421 4.270
4422 4.270
4423 4.270
4424 4.271
4425 4.271
4426 4.270
4427 4.270
4428 4.270
4429 4.270
4430 4.276
4431 4.276
4432 4.276
4433 4.276
4434 4.270
4435 4.270
4436 4.270
4437 4.270
4438 4.270
4439 4.275
4440 4.275
4441 4.271
4442 4.271
4443 4.275
4444 4.275
4445 4.276
4446 4.276
4447 4.270
4448 4.270
4449 4.270
4450 4.270
4451 4.270
4452 4.270
4453 4.276
4454 4.276
4455 4.276
4456 4.276
4457 4.180
4458 4.180
4459 4.276
4460 4.276
4461 4.270
4462 4.270
4463 4.233
4464 4.233
4465 4.275
4466 4.275
4467 4.270
4468 4.273
4469 4.273
4470 4.271
4471 4.271
4472 4.271
4473 4.271
4474 4.270
4475 4.270
4476 4.270
4477 4.270
4478 4.276
4479 4.276
4480 4.264
4481 4.264
4482 4.276
4483 4.276
4484 4.270
4485 4.270
4486 4.270
4487 4.270
4488 4.273
4489 4.273
4490 4.275
4491 4.275
4492 4.273
4493 4.273
4494 4.273
4495 4.273
4496 4.275
4497 4.275
4498 4.270
4499 4.270
4500 4.270
4501 4.270
4502 4.180
4503 4.180
4504 4.180
4505 4.180
4506 4.270
4507 4.270
4508 4.270
4509 4.233
4510 4.233
4511 4.233
4512 4.233
4513 4.272
4514 4.272
4515 4.273
4516 4.273
4517 4.270
4518 4.270
4519 4.270
4520 4.270
4521 4.273
4522 4.273
4523 4.271
4524 4.271
4525 4.264
4526 4.264
4527 4.264
4528 4.264
4529 4.270
4530 4.270
4531 4.270
4532 4.270
4533 4.276
4534 4.276
4535 4.180
4536 4.180
4537 4.270
4538 4.270
4539 4.270
4540 4.270
4541 4.233
4542 4.233
4543 4.272
4544 4.272
4545 4.271
4546 4.271
4547 4.271
4548 4.271
4549 4.271
4550 4.271
4551 4.275
4552 4.275
4553 4.275
4554 4.275
4555 4.270
4556 4.264
4557 4.264
4558 4.270
4559 4.270
4560 4.270
4561 4.270
4562 4.271
4563 4.271
4564 4.271
4565 4.271
4566 4.273
4567 4.273
4568 4.271
4569 4.271
4570 4.275
4571 4.275
4572 4.180
4573 4.180
4574 4.270
4575 4.270
4576 4.209
4577 4.209
4578 4.233
4579 4.233
4580 4.276
4581 4.276
4582 4.276
4583 4.276
4584 4.180
4585 4.180
4586 4.270
4587 4.270
4588 4.252
4589 4.252
4590 4.233
4591 4.233
4592 4.264
4593 4.264
4594 4.271
4595 4.271
4596 4.270
4597 4.270
4598 4.270
4599 4.270
4600 4.264
4601 4.264
4602 4.180
4603 4.180
4604 4.180
4605 4.180
4606 4.270
4607 4.270
4608 4.270
4609 4.270
4610 4.270
4611 4.270
4612 4.209
4613 4.209
4614 4.209
4615 4.209
4616 4.271
4617 4.271
4618 4.270
4619 4.270
4620 4.233
4621 4.233
4622 4.233
4623 4.233
4624 4.276
4625 4.276
4626 4.270
4627 4.270
4628 4.270
4629 4.270
4630 4.252
4631 4.252
4632 4.252
4633 4.252
4634 4.275
4635 4.275
4636 4.264
4637 4.264
4638 4.264
4639 4.264
4640 4.273
4641 4.273
4642 4.273
4643 4.273
4644 4.271
4645 4.271
4646 4.275
4647 4.275
4648 4.180
4649 4.180
4650 4.270
4651 4.270
4652 4.209
4653 4.209
4654 4.271
4655 4.271
4656 4.271
4657 4.271
4658 4.233
4659 4.233
4660 4.180
4661 4.180
4662 4.180
4663 4.180
4664 4.276
4665 4.276
4666 4.270
4667 4.270
4668 4.270
4669 4.270
4670 4.252
4671 4.252
4672 4.233
4673 4.233
4674 4.233
4675 4.233
4676 4.275
4677 4.275
4678 4.275
4679 4.275
4680 4.264
4681 4.264
4682 4.273
4683 4.273
4684 4.276
4685 4.276
4686 4.264
4687 4.264
4688 4.264
4689 4.264
4690 4.270
4691 4.270
4692 4.271
4693 4.271
4694 4.270
4695 4.270
4696 4.276
4697 4.276
4698 4.276
4699 4.276
4700 4.276
4701 4.276
4702 4.270
4703 4.270
4704 4.275
4705 4.275
4706 4.275
4707 4.275
4708 4.270
4709 4.270
4710 4.271
4711 4.271
4712 4.271
4713 4.271
4714 4.275
4715 4.275
4716 4.275
4717 4.275
4718 4.276
4719 4.276
4720 4.276
4721 4.276
4722 4.180
4723 4.180
4724 4.270
4725 4.270
4726 4.270
4727 4.270
4728 4.209
4729 4.209
4730 4.270
4731 4.270
4732 4.270
4733 4.270
4734 4.233
4735 4.233
4736 4.180
4737 4.180
4738 4.276
4739 4.276
4740 4.270
4741 4.270
4742 4.252
4743 4.252
4744 4.233
4745 4.233
4746 4.273
4747 4.273
4748 4.275
4749 4.275
4750 4.275
4751 4.275
4752 4.264
4753 4.264
4754 4.270
4755 4.270
4756 4.273
4757 4.273
4758 4.271
4759 4.271
4760 4.276
4761 4.276
4762 4.264
4763 4.264
4764 4.180
4765 4.180
4766 4.270
4767 4.270
4768 4.209
4769 4.209
4770 4.271
4771 4.271
4772 4.233
4773 4.233
4774 4.276
4775 4.276
4776 4.276
4777 4.276
4778 4.270
4779 4.270
4780 4.252
4781 4.252
4782 4.272
4783 4.272
4784 4.273
4785 4.273
4786 4.273
4787 4.273
4788 4.275
4789 4.275
4790 4.275
4791 4.275
4792 4.264
4793 4.264
4794 4.275
4795 4.275
4796 4.271
4797 4.271
4798 4.270
4799 4.270
4800 4.180
4801 4.180
4802 4.276
4803 4.276
4804 4.270
4805 4.270
4806 4.270
4807 4.270
4808 4.270
4809 4.270
4810 4.233
4811 4.233
4812 4.272
4813 4.272
4814 4.272
4815 4.272
4816 4.273
4817 4.273
4818 4.271
4819 4.271
4820 4.275
4821 4.275
4822 4.273
4823 4.273
4824 4.273
4825 4.273
4826 4.271
4827 4.271
4828 4.270
4829 4.270
4830 4.276
4831 4.276
4832 4.264
4833 4.264
4834 4.270
4835 4.270
4836 4.270
4837 4.270
4838 4.270
4839 4.270
4840 4.276
4841 4.276
4842 4.180
4843 4.180
4844 4.276
4845 4.276
4846 4.270
4847 4.270
4848 4.233
4849 4.233
4850 4.272
4851 4.272
4852 4.271
4853 4.271
4854 4.271
4855 4.271
4856 4.275
4857 4.275
4858 4.271
4859 4.271
4860 4.275
4861 4.275
4862 4.270
4863 4.270
4864 4.276
4865 4.276
4866 4.264
4867 4.264
4868 4.270
4869 4.270
4870 4.273
4871 4.273
4872 4.271
4873 4.271
4874 4.275
4875 4.275
4876 4.271
4877 4.271
4878 4.271
4879 4.271
4880 4.273
4881 4.273
4882 4.271
4883 4.271
4884 4.271
4885 4.271
4886 4.275
4887 4.275
4888 4.180
4889 4.180
4890 4.270
4891 4.270
4892 4.270
4893 4.270
4894 4.270
4895 4.270
4896 4.209
4897 4.209
4898 4.233
4899 4.233
4900 4.276
4901 4.276
4902 4.180
4903 4.180
4904 4.270
4905 4.270
4906 4.252
4907 4.252
4908 4.233
4909 4.233
4910 4.272
4911 4.272
4912 4.273
4913 4.273
4914 4.264
4915 4.264
4916 4.271
4917 4.271
4918 4.264
4919 4.264
4920 4.270
4921 4.270
4922 4.270
4923 4.270
4924 4.270
4925 4.270
4926 4.271
4927 4.271
4928 4.270
4929 4.270
4930 4.276
4931 4.276
4932 4.180
4933 4.180
4934 4.270
4935 4.270
4936 4.233
4937 4.233
4938 4.272
4939 4.272
4940 4.271
4941 4.271
4942 4.275
4943 4.275
4944 4.273
4945 4.273
4946 4.271
4947 4.271
4948 4.275
4949 4.275
4950 4.264
4951 4.264
4952 4.270
4953 4.270
4954 4.276
4955 4.276
4956 4.270
4957 4.270
4958 4.270
4959 4.270
4960 4.270
4961 4.270
4962 4.270
4963 4.270
4964 4.271
4965 4.271
4966 4.271
4967 4.271
4968 4.270
4969 4.270
4970 4.273
4971 4.273
4972 4.275
4973 4.275
4974 4.276
4975 4.276
4976 4.270
4977 4.270
4978 4.270
4979 4.270
4980 4.270
4981 4.270
4982 4.276
4983 4.276
4984 4.180
4985 4.180
4986 4.180
4987 4.180
4988 4.180
4989 4.180
4990 4.270
4991 4.270
4992 4.233
4993 4.233
4994 4.233
4995 4.233
4996 4.233
4997 4.233
4998 4.275
4999 4.275
5000 4.271
5001 4.271
5002 4.270
5003 4.270
5004 4.270
5005 4.270
5006 4.271
5007 4.271
5008 4.264
5009 4.264
5010 4.264
5011 4.264
5012 4.264
5013 4.264
5014 4.180
5015 4.180
5016 4.270
5017 4.270
5018 4.209
5019 4.209
5020 4.270
5021 4.270
5022 4.233
5023 4.233
5024 4.276
5025 4.276
5026 4.180
5027 4.180
5028 4.180
5029 4.180
5030 4.270
5031 4.270
5032 4.270
5033 4.270
5034 4.252
5035 4.252
5036 4.233
5037 4.233
5038 4.233
5039 4.233
5040 4.273
5041 4.273
5042 4.264
5043 4.264
5044 4.270
5045 4.270
5046 4.273
5047 4.273
5048 4.271
5049 4.271
5050 4.275
5051 4.275
5052 4.275
5053 4.275
5054 4.275
5055 4.275
5056 4.264
5057 4.264
5058 4.264
5059 4.264
5060 4.270
5061 4.270
5062 4.270
5063 4.270
5064 4.270
5065 4.270
5066 4.271
5067 4.271
5068 4.270
5069 4.270
5070 4.270
5071 4.270
5072 4.270
5073 4.270
5074 4.272
5075 4.272
5076 4.275
5077 4.275
5078 4.273
5079 4.273
5080 4.275
5081 4.275
5082 4.275
5083 4.275
5084 4.270
5085 4.270
5086 4.270
5087 4.270
5088 4.276
5089 4.276
5090 4.276
5091 4.276
5092 4.276
5093 4.276
5094 4.180
5095 4.180
5096 4.276
5097 4.276
5098 4.270
5099 4.270
5100 4.270
5101 4.270
5102 4.270
5103 4.270
5104 4.233
5105 4.233
5106 4.271
5107 4.271
5108 4.270
5109 4.270
5110 4.271
5111 4.271
5112 4.270
5113 4.270
5114 4.270
5115 4.270
5116 4.276
5117 4.276
5118 4.264
5119 4.264
5120 4.180
5121 4.180
5122 4.270
5123 4.270
5124 4.209
5125 4.209
5126 4.233
5127 4.233
5128 4.276
5129 4.276
5130 4.276
5131 4.276
5132 4.180
5133 4.180
5134 4.270
5135 4.270
5136 4.252
5137 4.252
5138 4.233
5139 4.233
5140 4.275
5141 4.275
5142 4.264
5143 4.264
5144 4.271
5145 4.271
5146 4.270
5147 4.270
5148 4.273
5149 4.273
5150 4.273
5151 4.273
5152 4.273
5153 4.273
5154 4.271
5155 4.271
5156 4.275
5157 4.275
5158 4.270
5159 4.270
5160 4.264
5161 4.264
5162 4.271
5163 4.271
5164 4.270
5165 4.270
5166 4.270
5167 4.270
5168 4.270
5169 4.270
5170 4.273
5171 4.273
5172 4.275
5173 4.275
5174 4.273
5175 4.273
5176 4.273
5177 4.273
5178 4.275
5179 4.275
5180 4.180
5181 4.270
5182 4.270
5183 4.270
5184 4.270
5185 4.209
5186 4.233
5187 4.276
5188 4.276
5189 4.276
5190 4.276
5191 4.270
5192 4.270
5193 4.270
5194 4.270
5195 4.252
5196 4.272
5197 4.272
5198 4.264
5199 4.271
5200 4.271
5201 4.271
5202 4.271
5203 4.271
5204 4.271
5205 4.270
5206 4.270
5207 4.276
5208 4.276
5209 4.270
5210 4.270
5211 4.271
5212 4.270
5213 4.270
5214 4.276
5215 4.276
5216 4.180
5217 4.180
5218 4.270
5219 4.270
5220 4.270
5221 4.270
5222 4.233
5223 4.233
5224 4.271
5225 4.271
5226 4.275
5227 4.275
5228 4.275
5229 4.273
5230 4.273
5231 4.271
5232 4.271
5233 4.271
5234 4.271
5235 4.270
5236 4.270
5237 4.264
5238 4.264
5239 4.180
5240 4.180
5241 4.209
5242 4.209
5243 4.233
5244 4.233
5245 4.180
5246 4.180
5247 4.276
5248 4.252
5249 4.252
5250 4.233
5251 4.233
5252 4.273
5253 4.273
5254 4.264
5255 4.264
5256 4.271
5257 4.271
5258 4.270
5259 4.270
5260 4.273
5261 4.273
5262 4.275
5263 4.275
5264 4.276
5265 4.264
5266 4.264
5267 4.270
5268 4.270
5269 4.271
5270 4.271
5271 4.270
5272 4.270
5273 4.180
5274 4.180
5275 4.270
5276 4.270
5277 4.270
5278 4.270
5279 4.270
5280 4.270
5281 4.233
5282 4.233
5283 4.272
5284 4.272
5285 4.275
5286 4.275
5287 4.275
5288 4.271
5289 4.271
5290 4.275
5291 4.275
5292 4.264
5293 4.264
5294 4.270
5295 4.270
5296 4.270
5297 4.270
5298 4.270
5299 4.270
5300 4.276
5301 4.276
5302 4.276
5303 4.276
5304 4.270
5305 4.270
5306 4.270
5307 4.270
5308 4.270
5309 4.270
5310 4.273
5311 4.271
5312 4.271
5313 4.271
5314 4.271
5315 4.275
5316 4.275
5317 4.276
5318 4.276
5319 4.276
5320 4.276
5321 4.270
5322 4.270
5323 4.272
5324 4.275
5325 4.275
5326 4.271
5327 4.271
5328 4.273
5329 4.273
5330 4.270
5331 4.270
5332 4.270
5333 4.270
5334 4.270
5335 4.270
5336 4.270
5337 4.270
5338 4.270
5339 4.270
5340 4.276
5341 4.276
5342 4.180
5343 4.180
5344 4.270
5345 4.270
5346 4.233
5347 4.233
5348 4.273
5349 4.273
5350 4.271
5351 4.270
5352 4.270
5353 4.273
5354 4.273
5355 4.264
5356 4.264
5357 4.180
5358 4.180
5359 4.180
5360 4.180
5361 4.270
5362 4.270
5363 4.270
5364 4.270
5365 4.270
5366 4.270
5367 4.209
5368 4.209
5369 4.209
5370 4.209
5371 4.270
5372 4.270
5373 4.233
5374 4.233
5375 4.233
5376 4.233
5377 4.180
5378 4.180
5379 4.270
5380 4.270
5381 4.252
5382 4.252
5383 4.252
5384 4.252
5385 4.233
5386 4.233
5387 4.272
5388 4.272
5389 4.264
5390 4.264
5391 4.264
5392 4.264
5393 4.271
5394 4.273
5395 4.273
5396 4.271
5397 4.271
5398 4.275
5399 4.275
5400 4.264
5401 4.264
5402 4.180
5403 4.180
5404 4.180
5405 4.180
5406 4.209
5407 4.209
5408 4.209
5409 4.209
5410 4.271
5411 4.271
5412 4.271
5413 4.271
5414 4.233
5415 4.233
5416 4.233
5417 4.233
5418 4.270
5419 4.270
5420 4.270
5421 4.270
5422 4.252
5423 4.252
5424 4.252
5425 4.252
5426 4.271
5427 4.271
5428 4.275
5429 4.275
5430 4.275
5431 4.275
5432 4.264
5433 4.264
5434 4.264
5435 4.264
5436 4.271
5437 4.271
5438 4.275
5439 4.275
5440 4.270
5441 4.270
5442 4.270
5443 4.271
5444 4.271
5445 4.271
5446 4.271
5447 4.270
5448 4.270
5449 4.270
5450 4.270
5451 4.270
5452 4.270
5453 4.276
5454 4.276
5455 4.180
5456 4.180
5457 4.180
5458 4.180
5459 4.276
5460 4.276
5461 4.276
5462 4.276
5463 4.233
5464 4.233
5465 4.233
5466 4.233
5467 4.275
5468 4.275
5469 4.275
5470 4.275
5471 4.271
5472 4.271
5473 4.270
5474 4.270
5475 4.271
5476 4.271
5477 4.270
5478 4.270
5479 4.276
5480 4.276
5481 4.276
5482 4.276
5483 4.264
5484 4.264
5485 4.264
5486 4.264
5487 4.270
5488 4.270
5489 4.270
5490 4.270
5491 4.270
5492 4.270
5493 4.276
5494 4.276
5495 4.180
5496 4.180
5497 4.180
5498 4.180
5499 4.276
5500 4.276
5501 4.276
5502 4.276
5503 4.270
5504 4.270
5505 4.270
5506 4.233
5507 4.233
5508 4.233
5509 4.233
5510 4.275
5511 4.275
5512 4.275
5513 4.275
5514 4.273
5515 4.273
5516 4.275
5517 4.275
5518 4.275
5519 4.275
5520 4.276
5521 4.276
5522 4.276
5523 4.276
5524 4.264
5525 4.264
5526 4.264
5527 4.264
5528 4.180
5529 4.180
5530 4.270
5531 4.270
5532 4.209
5533 4.209
5534 4.233
5535 4.233
5536 4.270
5537 4.270
5538 4.270
5539 4.270
5540 4.252
5541 4.252
5542 4.273
5543 4.273
5544 4.273
5545 4.273
5546 4.275
5547 4.275
5548 4.275
5549 4.275
5550 4.264
5551 4.264
5552 4.270
5553 4.273
5554 4.273
5555 4.275
5556 4.275
5557 4.275
5558 4.275
5559 4.271
5560 4.271
5561 4.270
5562 4.270
5563 4.276
5564 4.276
5565 4.276
5566 4.276
5567 4.180
5568 4.180
5569 4.180
5570 4.180
5571 4.270
5572 4.270
5573 4.270
5574 4.270
5575 4.233
5576 4.233
5577 4.233
5578 4.233
5579 4.272
5580 4.272
5581 4.272
5582 4.272
5583 4.273
5584 4.273
5585 4.273
5586 4.273
5587 4.275
5588 4.275
5589 4.271
5590 4.271
5591 4.270
5592 4.270
5593 4.264
5594 4.264
5595 4.264
5596 4.264
5597 4.270
5598 4.270
5599 4.270
5600 4.270
5601 4.276
5602 4.276
5603 4.276
5604 4.276
5605 4.180
5606 4.180
5607 4.276
5608 4.276
5609 4.270
5610 4.233
5611 4.233
5612 4.272
5613 4.272
5614 4.272
5615 4.272
5616 4.271
5617 4.271
5618 4.271
5619 4.271
5620 4.270
5621 4.270
5622 4.273
5623 4.273
5624 4.273
5625 4.273
5626 4.271
5627 4.271
5628 4.275
5629 4.275
5630 4.275
5631 4.275
5632 4.276
5633 4.276
5634 4.264
5635 4.264
5636 4.270
5637 4.270
5638 4.271
5639 4.271
5640 4.271
5641 4.271
5642 4.275
5643 4.275
5644 4.271
5645 4.271
5646 4.271
5647 4.271
5648 4.273
5649 4.273
5650 4.273
5651 4.273
5652 4.275
5653 4.275
5654 4.270
5655 4.270
5656 4.270
5657 4.276
5658 4.276
5659 4.276
5660 4.276
5661 4.180
5662 4.180
5663 4.270
5664 4.270
5665 4.270
5666 4.270
5667 4.233
5668 4.233
5669 4.273
5670 4.273
5671 4.271
5672 4.271
5673 4.271
5674 4.271
5675 4.271
5676 4.271
5677 4.271
5678 4.271
5679 4.264
5680 4.264
5681 4.180
5682 4.180
5683 4.270
5684 4.270
5685 4.270
5686 4.270
5687 4.209
5688 4.209
5689 4.270
5690 4.270
5691 4.233
5692 4.233
5693 4.276
5694 4.276
5695 4.270
5696 4.270
5697 4.252
5698 4.252
5699 4.272
5700 4.272
5701 4.264
5702 4.264
5703 4.273
5704 4.273
5705 4.273
5706 4.273
5707 4.271
5708 4.271
5709 4.271
5710 4.271
5711 4.275
5712 4.275
5713 4.270
5714 4.270
5715 4.270
5716 4.270
5717 4.270
5718 4.270
5719 4.271
5720 4.271
5721 4.270
5722 4.270
5723 4.270
5724 4.270
5725 4.270
5726 4.270
5727 4.271
5728 4.271
5729 4.275
5730 4.275
5731 4.273
5732 4.273
5733 4.180
5734 4.180
5735 4.270
5736 4.270
5737 4.209
5738 4.209
5739 4.270
5740 4.270
5741 4.233
5742 4.233
5743 4.276
5744 4.276
5745 4.276
5746 4.276
5747 4.270
5748 4.270
5749 4.270
5750 4.270
5751 4.270
5752 4.270
5753 4.270
5754 4.270
5755 4.252
5756 4.252
5757 4.264
5758 4.264
5759 4.271
5760 4.271
5761 4.270
5762 4.270
5763 4.270
5764 4.270
5765 4.271
5766 4.271
5767 4.271
5768 4.271
5769 4.276
5770 4.276
5771 4.180
5772 4.180
5773 4.270
5774 4.270
5775 4.209
5776 4.209
5777 4.271
5778 4.271
5779 4.233
5780 4.233
5781 4.180
5782 4.180
5783 4.180
5784 4.180
5785 4.180
5786 4.180
5787 4.270
5788 4.270
5789 4.270
5790 4.270
5791 4.252
5792 4.252
5793 4.233
5794 4.233
5795 4.233
5796 4.233
5797 4.233
5798 4.233
5799 4.275
5800 4.275
5801 4.275
5802 4.275
5803 4.264
5804 4.264
5805 4.270
5806 4.270
5807 4.270
5808 4.270
5809 4.273
5810 4.273
5811 4.271
5812 4.271
5813 4.264
5814 4.264
5815 4.264
5816 4.264
5817 4.264
5818 4.264
5819 4.270
5820 4.270
5821 4.271
5822 4.271
5823 4.180
5824 4.180
5825 4.276
5826 4.276
5827 4.270
5828 4.270
5829 4.270
5830 4.270
5831 4.233
5832 4.233
5833 4.273
5834 4.273
5835 4.275
5836 4.275
5837 4.275
5838 4.275
5839 4.275
5840 4.275
5841 4.275
5842 4.275
5843 4.276
5844 4.276
5845 4.264
5846 4.264
5847 4.270
5848 4.270
5849 4.270
5850 4.270
5851 4.270
5852 4.270
5853 4.180
5854 4.180
5855 4.276
5856 4.276
5857 4.270
5858 4.270
5859 4.270
5860 4.270
5861 4.270
5862 4.270
5863 4.270
5864 4.270
5865 4.270
5866 4.270
5867 4.233
5868 4.233
5869 4.272
5870 4.272
5871 4.275
5872 4.275
5873 4.271
5874 4.271
5875 4.275
5876 4.275
5877 4.270
5878 4.270
5879 4.270
5880 4.270
5881 4.276
5882 4.276
5883 4.264
5884 4.264
5885 4.270
5886 4.270
5887 4.270
5888 4.270
5889 4.270
5890 4.270
5891 4.276
5892 4.276
5893 4.276
5894 4.276
5895 4.276
5896 4.276
5897 4.270
5898 4.270
5899 4.273
5900 4.273
5901 4.271
5902 4.271
5903 4.275
5904 4.275
5905 4.270
5906 4.270
5907 4.275
5908 4.275
5909 4.270
5910 4.270
5911 4.270
5912 4.270
5913 4.180
5914 4.180
5915 4.180
5916 4.180
5917 4.209
5918 4.209
5919 4.209
5920 4.209
5921 4.233
5922 4.233
5923 4.233
5924 4.233
5925 4.276
5926 4.276
5927 4.252
5928 4.252
5929 4.252
5930 4.252
5931 4.272
5932 4.272
5933 4.273
5934 4.273
5935 4.264
5936 4.264
5937 4.264
5938 4.264
5939 4.271
5940 4.271
5941 4.273
5942 4.273
5943 4.273
5944 4.273
5945 4.273
5946 4.273
5947 4.270
5948 4.270
5949 4.270
5950 4.270
5951 4.271
5952 4.271
5953 4.271
5954 4.271
5955 4.270
5956 4.270
5957 4.270
5958 4.270
5959 4.276
5960 4.276
5961 4.180
5962 4.180
5963 4.180
5964 4.180
5965 4.270
5966 4.270
5967 4.270
5968 4.270
5969 4.233
5970 4.233
5971 4.233
5972 4.233
5973 4.272
5974 4.272
5975 4.271
5976 4.271
5977 4.275
5978 4.275
5979 4.275
5980 4.275
5981 4.273
5982 4.273
5983 4.264
5984 4.264
5985 4.264
5986 4.264
5987 4.270
5988 4.270
5989 4.270
5990 4.270
5991 4.270
5992 4.270
5993 4.270
5994 4.270
5995 4.276
5996 4.276
5997 4.276
5998 4.276
5999 4.271
6000 4.271
6001 4.271
6002 4.271
6003 4.273
6004 4.273
6005 4.271
6006 4.271
6007 4.271
6008 4.271
6009 4.271
6010 4.271
6011 4.275
6012 4.275
6013 4.275
6014 4.275
6015 4.270
6016 4.270
6017 4.276
6018 4.276
6019 4.276
6020 4.276
6021 4.270
6022 4.270
6023 4.275
6024 4.275
6025 4.275
6026 4.275
6027 4.271
6028 4.271
6029 4.271
6030 4.271
6031 4.270
6032 4.270
6033 4.270
6034 4.270
6035 4.270
6036 4.270
6037 4.270
6038 4.270
6039 4.276
6040 4.276
6041 4.276
6042 4.276
6043 4.180
6044 4.180
6045 4.233
6046 4.233
6047 4.273
6048 4.273
6049 4.273
6050 4.273
6051 4.270
6052 4.270
6053 4.271
6054 4.271
6055 4.264
6056 4.264
6057 4.270
6058 4.270
6059 4.270
6060 4.270
6061 4.180
6062 4.180
6063 4.270
6064 4.270
6065 4.270
6066 4.270
6067 4.270
6068 4.270
6069 4.270
6070 4.270
6071 4.233
6072 4.233
6073 4.272
6074 4.272
6075 4.272
6076 4.272
6077 4.273
6078 4.273
6079 4.273
6080 4.273
6081 4.275
6082 4.275
6083 4.264
6084 4.264
6085 4.180
6086 4.180
6087 4.180
6088 4.180
6089 4.270
6090 4.270
6091 4.270
6092 4.270
6093 4.270
6094 4.270
6095 4.233
6096 4.233
6097 4.233
6098 4.233
6099 4.271
6100 4.271
6101 4.271
6102 4.271
6103 4.270
6104 4.270
6105 4.275
6106 4.275
6107 4.264
6108 4.264
6109 4.264
6110 4.264
6111 4.270
6112 4.270
6113 4.276
6114 4.276
6115 4.180
6116 4.180
6117 4.270
6118 4.270
6119 4.233
6120 4.233
6121 4.271
6122 4.271
6123 4.271
6124 4.271
6125 4.270
6126 4.270
6127 4.271
6128 4.271
6129 4.271
6130 4.271
6131 4.275
6132 4.275
6133 4.275
6134 4.275
6135 4.270
6136 4.270
6137 4.264
6138 4.264
6139 4.180
6140 4.180
6141 4.270
6142 4.270
6143 4.270
6144 4.270
6145 4.270
6146 4.270
6147 4.209
6148 4.209
6149 4.233
6150 4.233
6151 4.276
6152 4.276
6153 4.180
6154 4.180
6155 4.270
6156 4.270
6157 4.252
6158 4.252
6159 4.233
6160 4.233
6161 4.264
6162 4.264
6163 4.273
6164 4.273
6165 4.275
6166 4.275
6167 4.264
6168 4.264
6169 4.180
6170 4.180
6171 4.270
6172 4.270
6173 4.270
6174 4.270
6175 4.270
6176 4.270
6177 4.209
6178 4.209
6179 4.271
6180 4.271
6181 4.233
6182 4.233
6183 4.276
6184 4.276
6185 4.276
6186 4.276
6187 4.270
6188 4.270
6189 4.252
6190 4.252
6191 4.275
6192 4.275
6193 4.264
6194 4.264
6195 4.273
6196 4.273
6197 4.275
6198 4.275
6199 4.270
6200 4.270
6201 4.270
6202 4.270
6203 4.271
6204 4.271
6205 4.276
6206 4.276
6207 4.276
6208 4.276
6209 4.270
6210 4.270
6211 4.270
6212 4.270
6213 4.270
6214 4.270
6215 4.270
6216 4.270
6217 4.275
6218 4.275
6219 4.273
6220 4.273
6221 4.273
6222 4.273
6223 4.271
6224 4.271
6225 4.270
6226 4.270
6227 4.276
6228 4.276
6229 4.180
6230 4.180
6231 4.209
6232 4.209
6233 4.270
6234 4.270
6235 4.270
6236 4.270
6237 4.270
6238 4.270
6239 4.233
6240 4.233
6241 4.276
6242 4.276
6243 4.180
6244 4.180
6245 4.180
6246 4.180
6247 4.276
6248 4.276
6249 4.252
6250 4.252
6251 4.233
6252 4.233
6253 4.233
6254 4.233
6255 4.275
6256 4.275
6257 4.264
6258 4.264
6259 4.270
6260 4.270
6261 4.270
6262 4.270
6263 4.273
6264 4.273
6265 4.271
6266 4.271
6267 4.276
6268 4.276
6269 4.264
6270 4.264
6271 4.264
6272 4.264
6273 4.180
6274 4.180
6275 4.209
6276 4.209
6277 4.271
6278 4.271
6279 4.270
6280 4.270
6281 4.233
6282 4.233
6283 4.252
6284 4.252
6285 4.273
6286 4.273
6287 4.275
6288 4.275
6289 4.275
6290 4.275
6291 4.264
6292 4.264
6293 4.273
6294 4.273
6295 4.271
6296 4.271
6297 4.271
6298 4.271
6299 4.275
6300 4.275
6301 4.275
6302 4.275
6303 4.270
6304 4.270
6305 4.270
6306 4.270
6307 4.271
6308 4.271
6309 4.270
6310 4.270
6311 4.180
6312 4.180
6313 4.180
6314 4.180
6315 4.276
6316 4.276
6317 4.270
6318 4.270
6319 4.270
6320 4.270
6321 4.270
6322 4.270
6323 4.233
6324 4.233
6325 4.233
6326 4.233
6327 4.272
6328 4.272
6329 4.273
6330 4.273
6331 4.275
6332 4.275
6333 4.271
6334 4.271
6335 4.276
6336 4.276
6337 4.264
6338 4.264
6339 4.264
6340 4.264
6341 4.276
6342 4.276
6343 4.276
6344 4.276
6345 4.180
6346 4.180
6347 4.276
6348 4.276
6349 4.270
6350 4.270
6351 4.233
6352 4.233
6353 4.272
6354 4.272
6355 4.271
6356 4.271
6357 4.275
6358 4.275
6359 4.271
6360 4.271
6361 4.275
6362 4.275
6363 4.275
6364 4.275
6365 4.270
6366 4.270
6367 4.270
6368 4.270
6369 4.276
6370 4.276
6371 4.264
6372 4.264
6373 4.180
6374 4.180
6375 4.180
6376 4.209
6377 4.209
6378 4.209
6379 4.233
6380 4.233
6381 4.233
6382 4.180
6383 4.180
6384 4.270
6385 4.270
6386 4.270
6387 4.270
6388 4.252
6389 4.252
6390 4.252
6391 4.233
6392 4.233
6393 4.273
6394 4.273
6395 4.271
6396 4.271
6397 4.275
6398 4.275
6399 4.264
6400 4.264
6401 4.264
6402 4.271
6403 4.271
6404 4.273
6405 4.273
6406 4.273
6407 4.273
6408 4.275
6409 4.275
6410 4.264
6411 4.264
6412 4.270
6413 4.270
6414 4.271
6415 4.271
6416 4.271
6417 4.270
6418 4.270
6419 4.270
6420 4.270
6421 4.276
6422 4.276
6423 4.276
6424 4.276
6425 4.270
6426 4.270
6427 4.272
6428 4.272
6429 4.273
6430 4.273
6431 4.275
6432 4.275
6433 4.275
6434 4.271
6435 4.271
6436 4.275
6437 4.275
6438 4.180
6439 4.180
6440 4.270
6441 4.270
6442 4.270
6443 4.270
6444 4.209
6445 4.209
6446 4.233
6447 4.233
6448 4.276
6449 4.276
6450 4.180
6451 4.180
6452 4.276
6453 4.276
6454 4.276
6455 4.270
6456 4.270
6457 4.252
6458 4.252
6459 4.233
6460 4.233
6461 4.272
6462 4.272
6463 4.271
6464 4.271
6465 4.264
6466 4.264
6467 4.273
6468 4.273
6469 4.273
6470 4.273
6471 4.271
6472 4.271
6473 4.271
6474 4.271
6475 4.276
6476 4.276
6477 4.276
6478 4.264
6479 4.264
6480 4.270
6481 4.270
6482 4.270
6483 4.270
6484 4.270
6485 4.270
6486 4.271
6487 4.271
6488 4.276
6489 4.276
6490 4.270
6491 4.270
6492 4.271
6493 4.271
6494 4.275
6495 4.275
6496 4.275
6497 4.275
6498 4.275
6499 4.271
6500 4.271
6501 4.273
6502 4.273
6503 4.275
6504 4.275
6505 4.270
6506 4.270
6507 4.270
6508 4.270
6509 4.276
6510 4.276
6511 4.270
6512 4.270
6513 4.273
6514 4.273
6515 4.273
6516 4.271
6517 4.271
6518 4.270
6519 4.270
6520 4.273
6521 4.273
6522 4.271
6523 4.271
6524 4.271
6525 4.271
6526 4.276
6527 4.276
6528 4.180
6529 4.180
6530 4.180
6531 4.180
6532 4.270
6533 4.270
6534 4.270
6535 4.270
6536 4.209
6537 4.209
6538 4.209
6539 4.209
6540 4.270
6541 4.270
6542 4.233
6543 4.233
6544 4.233
6545 4.233
6546 4.276
6547 4.276
6548 4.180
6549 4.180
6550 4.270
6551 4.270
6552 4.270
6553 4.270
6554 4.252
6555 4.252
6556 4.252
6557 4.252
6558 4.233
6559 4.233
6560 4.272
6561 4.272
6562 4.272
6563 4.275
6564 4.275
6565 4.264
6566 4.264
6567 4.264
6568 4.264
6569 4.270
6570 4.270
6571 4.271
6572 4.271
6573 4.264
6574 4.264
6575 4.270
6576 4.270
6577 4.271
6578 4.271
6579 4.271
6580 4.271
6581 4.270
6582 4.270
6583 4.270
6584 4.270
6585 4.270
6586 4.270
6587 4.270
6588 4.270
6589 4.273
6590 4.273
6591 4.271
6592 4.271
6593 4.271
6594 4.275
6595 4.275
6596 4.275
6597 4.275
6598 4.273
6599 4.273
6600 4.271
6601 4.271
6602 4.275
6603 4.275
6604 4.270
6605 4.270
6606 4.180
6607 4.180
6608 4.276
6609 4.276
6610 4.276
6611 4.276
6612 4.270
6613 4.270
6614 4.270
6615 4.270
6616 4.270
6617 4.270
6618 4.270
6619 4.270
6620 4.233
6621 4.233
6622 4.272
6623 4.272
6624 4.271
6625 4.271
6626 4.271
6627 4.270
6628 4.270
6629 4.270
6630 4.270
6631 4.276
6632 4.276
6633 4.276
6634 4.276
6635 4.264
6636 4.264
6637 4.180
6638 4.180
6639 4.270
6640 4.270
6641 4.270
6642 4.270
6643 4.209
6644 4.209
6645 4.270
6646 4.270
6647 4.233
6648 4.233
6649 4.276
6650 4.276
6651 4.180
6652 4.180
6653 4.270
6654 4.270
6655 4.252
6656 4.252
6657 4.233
6658 4.233
6659 4.271
6660 4.271
6661 4.275
6662 4.275
6663 4.275
6664 4.275
6665 4.264
6666 4.264
6667 4.270
6668 4.270
6669 4.271
6670 4.271
6671 4.275
6672 4.275
6673 4.270
6674 4.270
6675 4.264
6676 4.264
6677 4.270
6678 4.270
6679 4.270
6680 4.271
6681 4.271
6682 4.270
6683 4.270
6684 4.270
6685 4.270
6686 4.273
6687 4.273
6688 4.273
6689 4.273
6690 4.275
6691 4.275
6692 4.271
6693 4.271
6694 4.273
6695 4.273
6696 4.275
6697 4.275
6698 4.270
6699 4.270
6700 4.270
6701 4.270
6702 4.276
6703 4.276
6704 4.180
6705 4.180
6706 4.180
6707 4.180
6708 4.276
6709 4.276
6710 4.270
6711 4.270
6712 4.270
6713 4.270
6714 4.270
6715 4.233
6716 4.233
6717 4.233
6718 4.233
6719 4.272
6720 4.272
6721 4.272
6722 4.272
6723 4.270
6724 4.270
6725 4.276
6726 4.276
6727 4.264
6728 4.264
6729 4.264
6730 4.264
6731 4.270
6732 4.270
6733 4.270
6734 4.270
6735 4.270
6736 4.270
6737 4.270
6738 4.270
6739 4.276
6740 4.276
6741 4.180
6742 4.180
6743 4.180
6744 4.180
6745 4.180
6746 4.180
6747 4.270
6748 4.270
6749 4.233
6750 4.233
6751 4.233
6752 4.233
6753 4.233
6754 4.233
6755 4.271
6756 4.271
6757 4.271
6758 4.271
6759 4.275
6760 4.275
6761 4.270
6762 4.270
6763 4.270
6764 4.273
6765 4.273
6766 4.271
6767 4.271
6768 4.275
6769 4.275
6770 4.275
6771 4.275
6772 4.270
6773 4.270
6774 4.264
6775 4.264
6776 4.264
6777 4.264
6778 4.264
6779 4.264
6780 4.180
6781 4.180
6782 4.270
6783 4.270
6784 4.209
6785 4.209
6786 4.233
6787 4.233
6788 4.270
6789 4.270
6790 4.252
6791 4.252
6792 4.273
6793 4.273
6794 4.264
6795 4.264
6796 4.271
6797 4.271
6798 4.271
6799 4.271
6800 4.273
6801 4.273
6802 4.275
6803 4.275
6804 4.275
6805 4.275
6806 4.275
6807 4.275
6808 4.271
6809 4.271
6810 4.270
6811 4.270
6812 4.270
6813 4.270
6814 4.276
6815 4.276
6816 4.276
6817 4.276
6818 4.180
6819 4.180
6820 4.270
6821 4.270
6822 4.270
6823 4.233
6824 4.233
6825 4.272
6826 4.272
6827 4.275
6828 4.275
6829 4.270
6830 4.270
6831 4.271
6832 4.271
6833 4.264
6834 4.264
6835 4.270
6836 4.270
6837 4.270
6838 4.270
6839 4.270
6840 4.270
6841 4.270
6842 4.270
6843 4.276
6844 4.276
6845 4.276
6846 4.276
6847 4.276
6848 4.276
6849 4.180
6850 4.180
6851 4.276
6852 4.276
6853 4.270
6854 4.270
6855 4.233
6856 4.233
6857 4.271
6858 4.271
6859 4.273
6860 4.273
6861 4.273
6862 4.273
6863 4.271
6864 4.271
6865 4.275
6866 4.275
6867 4.270
6868 4.270
6869 4.270
6870 4.276
6871 4.276
6872 4.264
6873 4.264
6874 4.270
6875 4.270
6876 4.270
6877 4.270
6878 4.270
6879 4.270
6880 4.270
6881 4.270
6882 4.275
6883 4.275
6884 4.271
6885 4.271
6886 4.273
6887 4.273
6888 4.273
6889 4.273
6890 4.273
6891 4.273
6892 4.275
6893 4.275
6894 4.276
6895 4.276
6896 4.180
6897 4.180
6898 4.180
6899 4.180
6900 4.270
6901 4.270
6902 4.233
6903 4.233
6904 4.233
6905 4.233
6906 4.273
6907 4.273
6908 4.270
6909 4.270
6910 4.270
6911 4.270
6912 4.271
6913 4.271
6914 4.271
6915 4.271
6916 4.270
6917 4.270
6918 4.264
6919 4.264
6920 4.264
6921 4.264
6922 4.270
6923 4.270
6924 4.270
6925 4.270
6926 4.270
6927 4.270
6928 4.276
6929 4.276
6930 4.270
6931 4.270
6932 4.272
6933 4.272
6934 4.273
6935 4.273
6936 4.271
6937 4.271
6938 4.271
6939 4.271
6940 4.271
6941 4.271
6942 4.275
6943 4.275
6944 4.275
6945 4.275
6946 4.180
6947 4.180
6948 4.209
6949 4.209
6950 4.233
6951 4.233
6952 4.180
6953 4.180
6954 4.270
6955 4.270
6956 4.270
6957 4.270
6958 4.270
6959 4.270
6960 4.252
6961 4.252
6962 4.233
6963 4.233
6964 4.271
6965 4.271
6966 4.264
6967 4.264
6968 4.273
6969 4.273
6970 4.264
6971 4.264
6972 4.270
6973 4.270
6974 4.271
6975 4.271
6976 4.276
6977 4.276
6978 4.276
6979 4.276
6980 4.180
6981 4.180
6982 4.270
6983 4.270
6984 4.270
6985 4.270
6986 4.233
6987 4.233
6988 4.275
6989 4.275
6990 4.271
6991 4.271
6992 4.270
6993 4.270
6994 4.271
6995 4.271
6996 4.275
6997 4.275
6998 4.270
6999 4.270
7000 4.270
7001 4.270
7002 4.264
7003 4.264
7004 4.270
7005 4.270
7006 4.270
7007 4.270
7008 4.180
7009 4.180
7010 4.276
7011 4.276
7012 4.270
7013 4.270
7014 4.270
7015 4.270
7016 4.270
7017 4.270
7018 4.233
7019 4.233
7020 4.273
7021 4.273
7022 4.273
7023 4.273
7024 4.271
7025 4.271
7026 4.275
7027 4.275
7028 4.276
7029 4.276
7030 4.264
7031 4.264
7032 4.180
7033 4.180
7034 4.180
7035 4.180
7036 4.270
7037 4.270
7038 4.209
7039 4.209
7040 4.209
7041 4.209
7042 4.233
7043 4.233
7044 4.233
7045 4.233
7046 4.276
7047 4.276
7048 4.270
7049 4.270
7050 4.252
7051 4.252
7052 4.252
7053 4.252
7054 4.275
7055 4.275
7056 4.264
7057 4.264
7058 4.264
7059 4.264
7060 4.275
7061 4.275
7062 4.270
7063 4.270
7064 4.270
7065 4.270
7066 4.271
7067 4.271
7068 4.271
7069 4.271
7070 4.270
7071 4.270
7072 4.276
7073 4.276
7074 4.270
7075 4.270
7076 4.270
7077 4.270
7078 4.273
7079 4.273
7080 4.275
7081 4.275
7082 4.275
7083 4.275
7084 4.273
7085 4.273
7086 4.271
7087 4.271
7088 4.271
7089 4.271
7090 4.270
7091 4.270
7092 4.270
7093 4.270
7094 4.270
7095 4.270
7096 4.270
7097 4.270
7098 4.270
7099 4.270
7100 4.276
7101 4.276
7102 4.276
7103 4.276
7104 4.276
7105 4.276
7106 4.270
7107 4.270
7108 4.272
7109 4.272
7110 4.270
7111 4.270
7112 4.273
7113 4.273
7114 4.276
7115 4.276
7116 4.276
7117 4.276
7118 4.271
7119 4.271
7120 4.275
7121 4.275
7122 4.275
7123 4.275
7124 4.273
7125 4.273
7126 4.271
7127 4.271
7128 4.180
7129 4.180
7130 4.180
7131 4.180
7132 4.270
7133 4.270
7134 4.209
7135 4.209
7136 4.209
7137 4.209
7138 4.270
7139 4.270
7140 4.270
7141 4.270
7142 4.233
7143 4.233
7144 4.233
7145 4.233
7146 4.180
7147 4.180
7148 4.180
7149 4.180
7150 4.270
7151 4.270
7152 4.270
7153 4.270
7154 4.270
7155 4.270
7156 4.252
7157 4.252
7158 4.252
7159 4.252
7160 4.233
7161 4.233
7162 4.233
7163 4.233
7164 4.273
7165 4.273
7166 4.273
7167 4.273
7168 4.264
7169 4.264
7170 4.264
7171 4.264
7172 4.271
7173 4.271
7174 4.271
7175 4.271
7176 4.264
7177 4.264
7178 4.264
7179 4.264
7180 4.180
7181 4.180
7182 4.270
7183 4.270
7184 4.209
7185 4.209
7186 4.271
7187 4.271
7188 4.271
7189 4.271
7190 4.270
7191 4.270
7192 4.270
7193 4.270
7194 4.270
7195 4.270
7196 4.233
7197 4.233
7198 4.180
7199 4.180
7200 4.180
7201 4.180
7202 4.252
7203 4.252
7204 4.233
7205 4.233
7206 4.233
7207 4.233
7208 4.272
7209 4.272
7210 4.272
7211 4.272
7212 4.275
7213 4.275
7214 4.275
7215 4.275
7216 4.264
7217 4.264
7218 4.271
7219 4.271
7220 4.275
7221 4.275
7222 4.275
7223 4.275
7224 4.270
7225 4.270
7226 4.264
7227 4.264
7228 4.264
7229 4.264
7230 4.270
7231 4.270
7232 4.271
7233 4.271
7234 4.180
7235 4.180
7236 4.276
7237 4.276
7238 4.276
7239 4.276
7240 4.270
7241 4.270
7242 4.233
7243 4.233
7244 4.271
7245 4.271
7246 4.271
7247 4.271
7248 4.275
7249 4.275
7250 4.275
7251 4.275
7252 4.275
7253 4.275
7254 4.276
7255 4.276
7256 4.276
7257 4.276
7258 4.264
7259 4.264
7260 4.270
7261 4.270
7262 4.270
7263 4.270
7264 4.270
7265 4.270
7266 4.276
7267 4.276
7268 4.276
7269 4.276
7270 4.276
7271 4.276
7272 4.270
7273 4.270
7274 4.270
7275 4.270
7276 4.275
7277 4.275
7278 4.275
7279 4.275
7280 4.271
7281 4.271
7282 4.271
7283 4.271
7284 4.275
7285 4.275
7286 4.276
7287 4.276
7288 4.180
7289 4.180
7290 4.209
7291 4.209
7292 4.270
7293 4.270
7294 4.233
7295 4.233
7296 4.276
7297 4.276
7298 4.276
7299 4.276
7300 4.270
7301 4.270
7302 4.252
7303 4.252
7304 4.273
7305 4.273
7306 4.273
7307 4.273
7308 4.275
7309 4.275
7310 4.264
7311 4.264
7312 4.270
7313 4.270
7314 4.273
7315 4.273
7316 4.273
7317 4.273
7318 4.270
7319 4.270
7320 4.270
7321 4.270
7322 4.270
7323 4.270
7324 4.271
7325 4.271
7326 4.276
7327 4.276
7328 4.272
7329 4.272
7330 4.272
7331 4.272
7332 4.273
7333 4.273
7334 4.275
7335 4.275
7336 4.273
7337 4.273
7338 4.273
7339 4.273
7340 4.270
7341 4.270
7342 4.270
7343 4.270
7344 4.270
7345 4.270
7346 4.180
7347 4.180
7348 4.180
7349 4.180
7350 4.180
7351 4.180
7352 4.276
7353 4.276
7354 4.270
7355 4.270
7356 4.270
7357 4.270
7358 4.270
7359 4.270
7360 4.233
7361 4.233
7362 4.233
7363 4.233
7364 4.233
7365 4.233
7366 4.272
7367 4.272
7368 4.271
7369 4.271
7370 4.271
7371 4.271
7372 4.273
7373 4.273
7374 4.271
7375 4.271
7376 4.271
7377 4.271
7378 4.276
7379 4.276
7380 4.264
7381 4.264
7382 4.264
7383 4.264
7384 4.264
7385 4.264
7386 4.180
7387 4.180
7388 4.270
7389 4.270
7390 4.209
7391 4.209
7392 4.233
7393 4.233
7394 4.180
7395 4.180
7396 4.252
7397 4.252
7398 4.233
7399 4.233
7400 4.271
7401 4.271
7402 4.275
7403 4.275
7404 4.264
7405 4.264
7406 4.271
7407 4.271
7408 4.271
7409 4.271
7410 4.270
7411 4.270
7412 4.270
7413 4.270
7414 4.271
7415 4.271
7416 4.271
7417 4.271
7418 4.275
7419 4.275
7420 4.275
7421 4.275
7422 4.275
7423 4.275
7424 4.270
7425 4.270
7426 4.264
7427 4.264
7428 4.180
7429 4.180
7430 4.209
7431 4.209
7432 4.271
7433 4.271
7434 4.270
7435 4.270
7436 4.233
7437 4.233
7438 4.252
7439 4.252
7440 4.273
7441 4.273
7442 4.275
7443 4.275
7444 4.264
7445 4.264
7446 4.271
7447 4.271
7448 4.271
7449 4.271
7450 4.275
7451 4.275
7452 4.180
7453 4.180
7454 4.270
7455 4.270
7456 4.270
7457 4.270
7458 4.209
7459 4.209
7460 4.271
7461 4.271
7462 4.270
7463 4.270
7464 4.233
7465 4.233
7466 4.276
7467 4.276
7468 4.276
7469 4.276
7470 4.276
7471 4.276
7472 4.180
7473 4.180
7474 4.276
7475 4.276
7476 4.270
7477 4.270
7478 4.270
7479 4.270
7480 4.270
7481 4.270
7482 4.270
7483 4.270
7484 4.252
7485 4.252
7486 4.233
7487 4.233
7488 4.272
7489 4.272
7490 4.275
7491 4.275
7492 4.264
7493 4.264
7494 4.276
7495 4.276
7496 4.264
7497 4.264
7498 4.270
7499 4.270
7500 4.271
7501 4.271
7502 4.270
7503 4.270
7504 4.276
7505 4.276
7506 4.180
7507 4.180
7508 4.276
7509 4.276
7510 4.270
7511 4.270
7512 4.270
7513 4.270
7514 4.270
7515 4.270
7516 4.270
7517 4.270
7518 4.233
7519 4.233
7520 4.271
7521 4.271
7522 4.275
7523 4.275
7524 4.275
7525 4.275
7526 4.273
7527 4.273
7528 4.273
7529 4.273
7530 4.273
7531 4.273
7532 4.275
7533 4.275
7534 4.270
7535 4.270
7536 4.270
7537 4.270
7538 4.276
7539 4.276
7540 4.264
7541 4.264
7542 4.276
7543 4.276
7544 4.270
7545 4.270
7546 4.270
7547 4.270
7548 4.273
7549 4.273
7550 4.275
7551 4.275
7552 4.271
7553 4.271
7554 4.270
7555 4.270
7556 4.270
7557 4.270
7558 4.273
7559 4.273
7560 4.275
7561 4.275
7562 4.276
7563 4.276
7564 4.270
7565 4.270
7566 4.270
7567 4.270
7568 4.276
7569 4.276
7570 4.180
7571 4.180
7572 4.180
7573 4.180
7574 4.233
7575 4.233
7576 4.233
7577 4.233
7578 4.272
7579 4.272
7580 4.273
7581 4.273
7582 4.275
7583 4.275
7584 4.270
7585 4.270
7586 4.271
7587 4.271
7588 4.271
7589 4.271
7590 4.271
7591 4.271
7592 4.264
7593 4.264
7594 4.264
7595 4.264
7596 4.270
7597 4.270
7598 4.270
7599 4.270
7600 4.270
7601 4.270
7602 4.276
7603 4.276
7604 4.180
7605 4.180
7606 4.270
7607 4.270
7608 4.270
7609 4.270
7610 4.233
7611 4.233
7612 4.272
7613 4.272
7614 4.273
7615 4.273
7616 4.271
7617 4.271
7618 4.273
7619 4.273
7620 4.271
7621 4.271
7622 4.275
7623 4.275
7624 4.275
7625 4.275
7626 4.264
7627 4.264
7628 4.270
7629 4.270
7630 4.270
7631 4.270
7632 4.270
7633 4.270
7634 4.272
7635 4.272
7636 4.271
7637 4.271
7638 4.271
7639 4.271
7640 4.273
7641 4.273
7642 4.275
7643 4.275
7644 4.270
7645 4.270
7646 4.270
7647 4.270
7648 4.270
7649 4.270
7650 4.270
7651 4.270
7652 4.276
7653 4.276
7654 4.276
7655 4.276
7656 4.180
7657 4.180
7658 4.270
7659 4.270
7660 4.270
7661 4.270
7662 4.270
7663 4.270
7664 4.233
7665 4.233
7666 4.271
7667 4.271
7668 4.271
7669 4.271
7670 4.270
7671 4.270
7672 4.271
7673 4.271
7674 4.270
7675 4.270
7676 4.264
7677 4.264
7678 4.180
7679 4.180
7680 4.270
7681 4.270
7682 4.209
7683 4.209
7684 4.270
7685 4.270
7686 4.270
7687 4.270
7688 4.233
7689 4.233
7690 4.276
7691 4.276
7692 4.180
7693 4.180
7694 4.180
7695 4.180
7696 4.270
7697 4.270
7698 4.252
7699 4.252
7700 4.233
7701 4.233
7702 4.233
7703 4.233
7704 4.264
7705 4.264
7706 4.271
7707 4.271
7708 4.273
7709 4.273
7710 4.273
7711 4.273
7712 4.271
7713 4.271
7714 4.275
7715 4.275
7716 4.264
7717 4.264
7718 4.264
7719 4.264
7720 4.180
7721 4.270
7722 4.270
7723 4.209
7724 4.271
7725 4.271
7726 4.270
7727 4.270
7728 4.233
7729 4.270
7730 4.270
7731 4.270
7732 4.270
7733 4.252
7734 4.275
7735 4.275
7736 4.264
7737 4.273
7738 4.273
7739 4.275
7740 4.275
7741 4.275
7742 4.275
7743 4.270
7744 4.270
7745 4.270
7746 4.270
7747 4.270
7748 4.270
7749 4.270
7750 4.270
7751 4.271
7752 4.276
7753 4.276
7754 4.276
7755 4.276
7756 4.270
7757 4.270
7758 4.270
7759 4.270
7760 4.275
7761 4.270
7762 4.270
7763 4.271
7764 4.271
7765 4.271
7766 4.271
7767 4.270
7768 4.270
7769 4.276
7770 4.276
7771 4.180
7772 4.180
7773 4.270
7774 4.270
7775 4.209
7776 4.209
7777 4.233
7778 4.233
7779 4.276
7780 4.276
7781 4.276
7782 4.276
7783 4.180
7784 4.180
7785 4.276
7786 4.270
7787 4.270
7788 4.270
7789 4.270
7790 4.252
7791 4.252
7792 4.233
7793 4.233
7794 4.275
7795 4.275
7796 4.264
7797 4.264
7798 4.270
7799 4.270
7800 4.273
7801 4.273
7802 4.271
7803 4.271
7804 4.276
7805 4.264
7806 4.264
7807 4.180
7808 4.180
7809 4.209
7810 4.209
7811 4.271
7812 4.271
7813 4.233
7814 4.233
7815 4.180
7816 4.180
7817 4.270
7818 4.270
7819 4.252
7820 4.252
7821 4.233
7822 4.233
7823 4.273
7824 4.273
7825 4.275
7826 4.275
7827 4.275
7828 4.264
7829 4.264
7830 4.270
7831 4.270
7832 4.273
7833 4.273
7834 4.273
7835 4.273
7836 4.275
7837 4.275
7838 4.264
7839 4.264
7840 4.270
7841 4.270
7842 4.271
7843 4.271
7844 4.270
7845 4.270
7846 4.270
7847 4.270
7848 4.270
7849 4.270
7850 4.180
7851 4.180
7852 4.180
7853 4.180
7854 4.276
7855 4.276
7856 4.270
7857 4.270
7858 4.270
7859 4.270
7860 4.270
7861 4.270
7862 4.233
7863 4.233
7864 4.233
7865 4.233
7866 4.272
7867 4.272
7868 4.273
7869 4.275
7870 4.275
7871 4.271
7872 4.271
7873 4.275
7874 4.275
7875 4.270
7876 4.270
7877 4.276
7878 4.276
7879 4.264
7880 4.264
7881 4.264
7882 4.264
7883 4.270
7884 4.270
7885 4.270
7886 4.270
7887 4.276
7888 4.276
7889 4.276
7890 4.276
7891 4.270
7892 4.270
7893 4.270
7894 4.270
7895 4.272
7896 4.271
7897 4.271
7898 4.275
7899 4.275
7900 4.271
7901 4.271
7902 4.271
7903 4.271
7904 4.275
7905 4.275
7906 4.275
7907 4.275
7908 4.270
7909 4.270
7910 4.276
7911 4.276
7912 4.276
7913 4.276
7914 4.273
7915 4.273
7916 4.271
7917 4.275
7918 4.275
7919 4.271
7920 4.271
7921 4.273
7922 4.273
7923 4.270
7924 4.270
7925 4.270
7926 4.270
7927 4.270
7928 4.270
7929 4.270
7930 4.270
7931 4.276
7932 4.276
7933 4.276
7934 4.276
7935 4.180
7936 4.180
7937 4.270
7938 4.270
7939 4.233
7940 4.233
7941 4.272
7942 4.272
7943 4.273
7944 4.273
7945 4.271
7946 4.273
7947 4.273
7948 4.264
7949 4.264
7950 4.180
7951 4.180
7952 4.180
7953 4.180
7954 4.270
7955 4.270
7956 4.270
7957 4.270
7958 4.209
7959 4.209
7960 4.209
7961 4.209
7962 4.270
7963 4.270
7964 4.233
7965 4.233
7966 4.233
7967 4.233
7968 4.270
7969 4.270
7970 4.270
7971 4.270
7972 4.252
7973 4.252
7974 4.252
7975 4.252
7976 4.272
7977 4.272
7978 4.271
7979 4.271
7980 4.264
7981 4.264
7982 4.264
7983 4.264
7984 4.273
7985 4.273
7986 4.273
7987 4.273
7988 4.271
7989 4.271
7990 4.275
7991 4.275
7992 4.270
7993 4.271
7994 4.271
7995 4.271
7996 4.271
7997 4.270
7998 4.270
7999 4.271
8000 4.271
8001 4.275
8002 4.275
8003 4.275
8004 4.275
8005 4.271
8006 4.271
8007 4.271
8008 4.271
8009 4.270
8010 4.270
8011 4.270
8012 4.270
8013 4.270
8014 4.270
8015 4.276
8016 4.276
8017 4.180
8018 4.180
8019 4.276
8020 4.276
8021 4.276
8022 4.276
8023 4.270
8024 4.233
8025 4.233
8026 4.271
8027 4.271
8028 4.270
8029 4.270
8030 4.271
8031 4.271
8032 4.271
8033 4.271
8034 4.276
8035 4.276
8036 4.276
8037 4.276
8038 4.264
8039 4.264
8040 4.270
8041 4.270
8042 4.270
8043 4.270
8044 4.270
8045 4.270
8046 4.270
8047 4.270
8048 4.180
8049 4.180
8050 4.270
8051 4.270
8052 4.233
8053 4.233
8054 4.275
8055 4.275
8056 4.275
8057 4.275
8058 4.270
8059 4.273
8060 4.273
8061 4.275
8062 4.275
8063 4.264
8064 4.264
8065 4.270
8066 4.270
8067 4.180
8068 4.180
8069 4.270
8070 4.270
8071 4.270
8072 4.270
8073 4.270
8074 4.270
8075 4.233
8076 4.233
8077 4.273
8078 4.273
8079 4.273
8080 4.273
8081 4.275
8082 4.275
8083 4.264
8084 4.264
8085 4.270
8086 4.270
8087 4.276
8088 4.276
8089 4.180
8090 4.180
8091 4.270
8092 4.270
8093 4.270
8094 4.270
8095 4.270
8096 4.270
8097 4.270
8098 4.233
8099 4.233
8100 4.272
8101 4.272
8102 4.272
8103 4.272
8104 4.270
8105 4.270
8106 4.271
8107 4.271
8108 4.275
8109 4.275
8110 4.270
8111 4.270
8112 4.264
8113 4.264
8114 4.180
8115 4.180
8116 4.270
8117 4.270
8118 4.209
8119 4.209
8120 4.270
8121 4.270
8122 4.270
8123 4.270
8124 4.233
8125 4.233
8126 4.276
8127 4.276
8128 4.180
8129 4.180
8130 4.180
8131 4.180
8132 4.180
8133 4.180
8134 4.252
8135 4.252
8136 4.233
8137 4.233
8138 4.233
8139 4.233
8140 4.233
8141 4.233
8142 4.271
8143 4.271
8144 4.271
8145 4.271
8146 4.264
8147 4.264
8148 4.270
8149 4.270
8150 4.273
8151 4.273
8152 4.275
8153 4.275
8154 4.270
8155 4.264
8156 4.264
8157 4.264
8158 4.264
8159 4.264
8160 4.264
8161 4.180
8162 4.180
8163 4.270
8164 4.270
8165 4.209
8166 4.209
8167 4.271
8168 4.271
8169 4.233
8170 4.233
8171 4.276
8172 4.276
8173 4.270
8174 4.270
8175 4.252
8176 4.252
8177 4.275
8178 4.275
8179 4.264
8180 4.264
8181 4.271
8182 4.271
8183 4.271
8184 4.271
8185 4.273
8186 4.273
8187 4.275
8188 4.275
8189 4.275
8190 4.275
8191 4.275
8192 4.275
8193 4.270
8194 4.270
8195 4.270
8196 4.270
8197 4.271
8198 4.271
8199 4.276
8200 4.276
8201 4.180
8202 4.180
8203 4.276
8204 4.276
8205 4.270
8206 4.270
8207 4.270
8208 4.270
8209 4.233
8210 4.233
8211 4.275
8212 4.275
8213 4.273
8214 4.273
8215 4.271
8216 4.271
8217 4.270
8218 4.270
8219 4.276
8220 4.276
8221 4.264
8222 4.264
8223 4.270
8224 4.270
8225 4.270
8226 4.270
8227 4.270
8228 4.270
8229 4.276
8230 4.276
8231 4.276
8232 4.276
8233 4.276
8234 4.276
8235 4.180
8236 4.180
8237 4.180
8238 4.180
8239 4.276
8240 4.276
8241 4.233
8242 4.233
8243 4.233
8244 4.233
8245 4.275
8246 4.275
8247 4.273
8248 4.273
8249 4.271
8250 4.271
8251 4.275
8252 4.275
8253 4.270
8254 4.270
8255 4.276
8256 4.276
8257 4.264
8258 4.264
8259 4.264
8260 4.264
8261 4.180
8262 4.180
8263 4.180
8264 4.180
8265 4.209
8266 4.209
8267 4.209
8268 4.209
8269 4.270
8270 4.270
8271 4.233
8272 4.233
8273 4.233
8274 4.233
8275 4.270
8276 4.270
8277 4.270
8278 4.270
8279 4.252
8280 4.252
8281 4.252
8282 4.252
8283 4.273
8284 4.273
8285 4.275
8286 4.275
8287 4.264
8288 4.264
8289 4.264
8290 4.264
8291 4.273
8292 4.273
8293 4.273
8294 4.273
8295 4.273
8296 4.273
8297 4.271
8298 4.271
8299 4.275
8300 4.275
8301 4.275
8302 4.275
8303 4.180
8304 4.180
8305 4.270
8306 4.270
8307 4.209
8308 4.209
8309 4.271
8310 4.271
8311 4.271
8312 4.271
8313 4.270
8314 4.270
8315 4.270
8316 4.270
8317 4.233
8318 4.233
8319 4.276
8320 4.276
8321 4.270
8322 4.270
8323 4.252
8324 4.252
8325 4.272
8326 4.272
8327 4.273
8328 4.273
8329 4.275
8330 4.275
8331 4.275
8332 4.275
8333 4.264
8334 4.264
8335 4.270
8336 4.270
8337 4.270
8338 4.270
8339 4.271
8340 4.271
8341 4.271
8342 4.271
8343 4.276
8344 4.276
8345 4.276
8346 4.276
8347 4.180
8348 4.180
8349 4.276
8350 4.276
8351 4.276
8352 4.276
8353 4.270
8354 4.270
8355 4.233
8356 4.233
8357 4.272
8358 4.272
8359 4.271
8360 4.271
8361 4.275
8362 4.275
8363 4.273
8364 4.273
8365 4.271
8366 4.271
8367 4.271
8368 4.271
8369 4.271
8370 4.271
8371 4.276
8372 4.276
8373 4.276
8374 4.276
8375 4.264
8376 4.264
8377 4.180
8378 4.180
8379 4.276
8380 4.276
8381 4.270
8382 4.270
8383 4.270
8384 4.270
8385 4.270
8386 4.270
8387 4.233
8388 4.233
8389 4.271
8390 4.271
8391 4.275
8392 4.275
8393 4.275
8394 4.275
8395 4.271
8396 4.271
8397 4.273
8398 4.273
8399 4.273
8400 4.273
8401 4.275
8402 4.275
8403 4.276
8404 4.276
8405 4.264
8406 4.264
8407 4.270
8408 4.270
8409 4.270
8410 4.270
8411 4.270
8412 4.270
8413 4.273
8414 4.273
8415 4.273
8416 4.273
8417 4.275
8418 4.275
8419 4.271
8420 4.271
8421 4.271
8422 4.271
8423 4.275
8424 4.275
8425 4.270
8426 4.270
8427 4.270
8428 4.270
8429 4.180
8430 4.180
8431 4.180
8432 4.180
8433 4.270
8434 4.270
8435 4.270
8436 4.270
8437 4.209
8438 4.209
8439 4.209
8440 4.209
8441 4.233
8442 4.233
8443 4.233
8444 4.233
8445 4.276
8446 4.276
8447 4.180
8448 4.180
8449 4.270
8450 4.270
8451 4.270
8452 4.270
8453 4.270
8454 4.270
8455 4.252
8456 4.252
8457 4.252
8458 4.252
8459 4.233
8460 4.233
8461 4.272
8462 4.272
8463 4.272
8464 4.272
8465 4.273
8466 4.273
8467 4.264
8468 4.264
8469 4.264
8470 4.264
8471 4.271
8472 4.271
8473 4.271
8474 4.271
8475 4.264
8476 4.264
8477 4.270
8478 4.270
8479 4.270
8480 4.270
8481 4.271
8482 4.271
8483 4.271
8484 4.271
8485 4.276
8486 4.276
8487 4.270
8488 4.270
8489 4.272
8490 4.272
8491 4.271
8492 4.271
8493 4.271
8494 4.271
8495 4.275
8496 4.275
8497 4.275
8498 4.275
8499 4.273
8500 4.273
8501 4.275
8502 4.275
8503 4.270
8504 4.270
8505 4.270
8506 4.270
8507 4.180
8508 4.180
8509 4.276
8510 4.276
8511 4.276
8512 4.276
8513 4.270
8514 4.270
8515 4.270
8516 4.270
8517 4.233
8518 4.233
8519 4.271
8520 4.271
8521 4.271
8522 4.271
8523 4.271
8524 4.271
8525 4.270
8526 4.270
8527 4.273
8528 4.273
8529 4.276
8530 4.276
8531 4.276
8532 4.276
8533 4.264
8534 4.264
8535 4.270
8536 4.270
8537 4.270
8538 4.270
8539 4.270
8540 4.270
8541 4.270
8542 4.270
8543 4.276
8544 4.276
8545 4.180
8546 4.180
8547 4.180
8548 4.180
8549 4.270
8550 4.270
8551 4.270
8552 4.270
8553 4.233
8554 4.233
8555 4.233
8556 4.233
8557 4.275
8558 4.275
8559 4.275
8560 4.275
8561 4.271
8562 4.271
8563 4.270
8564 4.270
8565 4.271
8566 4.271
8567 4.275
8568 4.275
8569 4.264
8570 4.264
8571 4.264
8572 4.264
8573 4.180
8574 4.180
8575 4.270
8576 4.270
8577 4.270
8578 4.270
8579 4.209
8580 4.209
8581 4.270
8582 4.270
8583 4.233
8584 4.233
8585 4.270
8586 4.270
8587 4.252
8588 4.252
8589 4.273
8590 4.273
8591 4.273
8592 4.273
8593 4.264
8594 4.264
8595 4.273
8596 4.273
8597 4.271
8598 4.271
8599 4.275
8600 4.275
8601 4.275
8602 4.275
8603 4.270
8604 4.270
8605 4.270
8606 4.270
8607 4.271
8608 4.271
8609 4.270
8610 4.270
8611 4.276
8612 4.276
8613 4.270
8614 4.270
8615 4.270
8616 4.270
8617 4.270
8618 4.270
8619 4.272
8620 4.272
8621 4.272
8622 4.272
8623 4.275
8624 4.275
8625 4.270
8626 4.270
8627 4.270
8628 4.270
8629 4.270
8630 4.270
8631 4.270
8632 4.270
8633 4.270
8634 4.270
8635 4.270
8636 4.270
8637 4.276
8638 4.276
8639 4.276
8640 4.276
8641 4.276
8642 4.276
8643 4.270
8644 4.270
8645 4.270
8646 4.270
8647 4.271
8648 4.271
8649 4.271
8650 4.271
8651 4.270
8652 4.270
8653 4.270
8654 4.270
8655 4.273
8656 4.273
8657 4.271
8658 4.271
8659 4.270
8660 4.270
8661 4.276
8662 4.276
8663 4.180
8664 4.180
8665 4.209
8666 4.209
8667 4.233
8668 4.233
8669 4.180
8670 4.180
8671 4.270
8672 4.270
8673 4.252
8674 4.252
8675 4.233
8676 4.233
8677 4.275
8678 4.275
8679 4.264
8680 4.264
8681 4.271
8682 4.271
8683 4.271
8684 4.271
8685 4.270
8686 4.270
8687 4.273
8688 4.273
8689 4.273
8690 4.273
8691 4.264
8692 4.264
8693 4.271
8694 4.271
8695 4.270
8696 4.270
8697 4.180
8698 4.180
8699 4.270
8700 4.270
8701 4.270
8702 4.270
8703 4.233
8704 4.233
8705 4.273
8706 4.273
8707 4.275
8708 4.275
8709 4.271
8710 4.271
8711 4.275
8712 4.275
8713 4.264
8714 4.264
8715 4.180
8716 4.180
8717 4.270
8718 4.270
8719 4.270
8720 4.270
8721 4.270
8722 4.270
8723 4.209
8724 4.209
8725 4.270
8726 4.270
8727 4.270
8728 4.270
8729 4.233
8730 4.233
8731 4.180
8732 4.180
8733 4.276
8734 4.276
8735 4.270
8736 4.270
8737 4.270
8738 4.270
8739 4.252
8740 4.252
8741 4.233
8742 4.233
8743 4.272
8744 4.272
8745 4.264
8746 4.264
8747 4.271
8748 4.271
8749 4.271
8750 4.271
8751 4.275
8752 4.275
8753 4.270
8754 4.270
8755 4.270
8756 4.270
8757 4.276
8758 4.276
8759 4.264
8760 4.264
8761 4.270
8762 4.270
8763 4.271
8764 4.271
8765 4.276
8766 4.276
8767 4.270
8768 4.270
8769 4.270
8770 4.270
8771 4.271
8772 4.271
8773 4.275
8774 4.275
8775 4.275
8776 4.275
8777 4.275
8778 4.275
8779 4.270
8780 4.270
8781 4.276
8782 4.276
8783 4.180
8784 4.180
8785 4.180
8786 4.180
8787 4.180
8788 4.180
8789 4.180
8790 4.180
8791 4.276
8792 4.276
8793 4.270
8794 4.270
8795 4.233
8796 4.233
8797 4.233
8798 4.233
8799 4.233
8800 4.233
8801 4.233
8802 4.233
8803 4.273
8804 4.273
8805 4.271
8806 4.271
8807 4.270
8808 4.270
8809 4.270
8810 4.270
8811 4.273
8812 4.273
8813 4.276
8814 4.276
8815 4.264
8816 4.264
8817 4.264
8818 4.264
8819 4.264
8820 4.264
8821 4.264
8822 4.264
8823 4.180
8824 4.180
8825 4.270
8826 4.270
8827 4.209
8828 4.209
8829 4.270
8830 4.270
8831 4.233
8832 4.233
8833 4.276
8834 4.276
8835 4.180
8836 4.180
8837 4.270
8838 4.270
8839 4.270
8840 4.270
8841 4.252
8842 4.252
8843 4.233
8844 4.233
8845 4.272
8846 4.272
8847 4.275
8848 4.275
8849 4.264
8850 4.264
8851 4.273
8852 4.273
8853 4.275
8854 4.275
8855 4.275
8856 4.275
8857 4.275
8858 4.275
8859 4.275
8860 4.275
8861 4.264
8862 4.264
8863 4.270
8864 4.270
8865 4.271
8866 4.271
8867 4.270
8868 4.270
8869 4.270
8870 4.270
8871 4.270
8872 4.270
8873 4.273
8874 4.273
8875 4.271
8876 4.271
8877 4.275
8878 4.275
8879 4.273
8880 4.273
8881 4.271
8882 4.271
8883 4.275
8884 4.275
8885 4.270
8886 4.270
8887 4.276
8888 4.276
8889 4.276
8890 4.276
8891 4.276
8892 4.276
8893 4.276
8894 4.276
8895 4.180
8896 4.180
8897 4.276
8898 4.276
8899 4.270
8900 4.270
8901 4.233
8902 4.233
8903 4.272
8904 4.272
8905 4.271
8906 4.271
8907 4.271
8908 4.271
8909 4.270
8910 4.270
8911 4.270
8912 4.270
8913 4.276
8914 4.276
8915 4.264
8916 4.264
8917 4.270
8918 4.270
8919 4.270
8920 4.270
8921 4.270
8922 4.270
8923 4.276
8924 4.276
8925 4.271
8926 4.271
8927 4.275
8928 4.275
8929 4.270
8930 4.270
8931 4.273
8932 4.273
8933 4.273
8934 4.273
8935 4.273
8936 4.273
8937 4.273
8938 4.273
8939 4.271
8940 4.271
8941 4.275
8942 4.275
8943 4.180
8944 4.180
8945 4.270
8946 4.270
8947 4.209
8948 4.209
8949 4.233
8950 4.233
8951 4.180
8952 4.180
8953 4.180
8954 4.180
8955 4.270
8956 4.270
8957 4.252
8958 4.252
8959 4.233
8960 4.233
8961 4.233
8962 4.233
8963 4.273
8964 4.273
8965 4.264
8966 4.264
8967 4.271
8968 4.271
8969 4.273
8970 4.273
8971 4.264
8972 4.264
8973 4.264
8974 4.264
8975 4.271
8976 4.271
8977 4.270
8978 4.270
8979 4.276
8980 4.276
8981 4.180
8982 4.180
8983 4.270
8984 4.270
8985 4.270
8986 4.270
8987 4.270
8988 4.270
8989 4.233
8990 4.233
8991 4.272
8992 4.272
8993 4.275
8994 4.275
8995 4.271
8996 4.271
8997 4.271
8998 4.271
8999 4.271
9000 4.271
9001 4.271
9002 4.271
9003 4.275
9004 4.275
9005 4.275
9006 4.275
9007 4.264
9008 4.264
9009 4.270
9010 4.270
9011 4.270
9012 4.270
9013 4.270
9014 4.270
9015 4.276
9016 4.276
9017 4.270
9018 4.270
9019 4.271
9020 4.271
9021 4.270
9022 4.270
9023 4.273
9024 4.273
9025 4.271
9026 4.271
9027 4.275
9028 4.275
9029 4.270
9030 4.270
9031 4.276
9032 4.276
9033 4.270
9034 4.270
9035 4.276
9036 4.276
9037 4.276
9038 4.276
9039 4.270
9040 4.270
9041 4.275
9042 4.275
9043 4.271
9044 4.271
9045 4.270
9046 4.270
9047 4.276
9048 4.276
9049 4.270
9050 4.270
9051 4.270
9052 4.270
9053 4.270
9054 4.270
9055 4.270
9056 4.270
9057 4.270
9058 4.270
9059 4.273
9060 4.273
9061 4.270
9062 4.270
9063 4.273
9064 4.273
9065 4.273
9066 4.273
9067 4.271
9068 4.271
9069 4.270
9070 4.270
9071 4.270
9072 4.270
9073 4.180
9074 4.180
9075 4.180
9076 4.180
9077 4.270
9078 4.270
9079 4.233
9080 4.233
9081 4.233
9082 4.233
9083 4.272
9084 4.272
9085 4.273
9086 4.273
9087 4.270
9088 4.270
9089 4.264
9090 4.264
9091 4.264
9092 4.264
9093 4.270
9094 4.270
9095 4.270
9096 4.270
9097 4.270
9098 4.270
9099 4.271
9100 4.271
9101 4.271
9102 4.271
9103 4.271
9104 4.271
9105 4.275
9106 4.275
9107 4.275
9108 4.275
9109 4.180
9110 4.270
9111 4.270
9112 4.270
9113 4.270
9114 4.270
9115 4.270
9116 4.270
9117 4.270
9118 4.209
9119 4.270
9120 4.270
9121 4.233
9122 4.180
9123 4.180
9124 4.270
9125 4.270
9126 4.252
9127 4.233
9128 4.233
9129 4.264
9130 4.271
9131 4.271
9132 4.270
9133 4.270
9134 4.271
9135 4.271
9136 4.270
9137 4.270
9138 4.264
9139 4.264
9140 4.180
9141 4.180
9142 4.180
9143 4.180
9144 4.270
9145 4.270
9146 4.209
9147 4.209
9148 4.209
9149 4.209
9150 4.271
9151 4.270
9152 4.270
9153 4.233
9154 4.233
9155 4.233
9156 4.233
9157 4.276
9158 4.276
9159 4.276
9160 4.276
9161 4.180
9162 4.180
9163 4.180
9164 4.180
9165 4.252
9166 4.252
9167 4.252
9168 4.252
9169 4.233
9170 4.233
9171 4.233
9172 4.233
9173 4.275
9174 4.264
9175 4.264
9176 4.264
9177 4.264
9178 4.275
9179 4.275
9180 4.264
9181 4.264
9182 4.264
9183 4.264
9184 4.180
9185 4.180
9186 4.180
9187 4.180
9188 4.270
9189 4.270
9190 4.209
9191 4.209
9192 4.209
9193 4.209
9194 4.271
9195 4.271
9196 4.271
9197 4.271
9198 4.233
9199 4.233
9200 4.233
9201 4.233
9202 4.276
9203 4.270
9204 4.270
9205 4.270
9206 4.270
9207 4.270
9208 4.270
9209 4.252
9210 4.252
9211 4.252
9212 4.252
9213 4.275
9214 4.275
9215 4.275
9216 4.275
9217 4.264
9218 4.264
9219 4.264
9220 4.264
9221 4.273
9222 4.273
9223 4.273
9224 4.273
9225 4.275
9226 4.275
9227 4.275
9228 4.275
9229 4.276
9230 4.270
9231 4.270
9232 4.271
9233 4.271
9234 4.271
9235 4.271
9236 4.270
9237 4.270
9238 4.270
9239 4.270
9240 4.270
9241 4.270
9242 4.270
9243 4.270
9244 4.276
9245 4.276
9246 4.180
9247 4.180
9248 4.180
9249 4.180
9250 4.276
9251 4.276
9252 4.276
9253 4.276
9254 4.270
9255 4.270
9256 4.270
9257 4.270
9258 4.233
9259 4.233
9260 4.233
9261 4.233
9262 4.275
9263 4.275
9264 4.275
9265 4.275
9266 4.275
9267 4.270
9268 4.270
9269 4.276
9270 4.276
9271 4.276
9272 4.276
9273 4.264
9274 4.264
9275 4.264
9276 4.264
9277 4.180
9278 4.180
9279 4.209
9280 4.209
9281 4.270
9282 4.270
9283 4.233
9284 4.233
9285 4.276
9286 4.276
9287 4.276
9288 4.276
9289 4.276
9290 4.276
9291 4.276
9292 4.276
9293 4.252
9294 4.252
9295 4.273
9296 4.275
9297 4.275
9298 4.275
9299 4.275
9300 4.264
9301 4.264
9302 4.270
9303 4.270
9304 4.273
9305 4.273
9306 4.271
9307 4.271
9308 4.271
9309 4.271
9310 4.275
9311 4.275
9312 4.275
9313 4.275
9314 4.276
9315 4.276
9316 4.276
9317 4.276
9318 4.180
9319 4.180
9320 4.270
9321 4.270
9322 4.270
9323 4.270
9324 4.209
9325 4.209
9326 4.271
9327 4.271
9328 4.233
9329 4.233
9330 4.252
9331 4.252
9332 4.272
9333 4.273
9334 4.273
9335 4.273
9336 4.273
9337 4.275
9338 4.275
9339 4.275
9340 4.275
9341 4.275
9342 4.275
9343 4.264
9344 4.264
9345 4.273
9346 4.273
9347 4.273
9348 4.273
9349 4.270
9350 4.270
9351 4.271
9352 4.271
9353 4.270
9354 4.270
9355 4.276
9356 4.276
9357 4.276
9358 4.276
9359 4.276
9360 4.276
9361 4.270
9362 4.270
9363 4.272
9364 4.272
9365 4.272
9366 4.272
9367 4.273
9368 4.273
9369 4.273
9370 4.273
9371 4.271
9372 4.275
9373 4.275
9374 4.271
9375 4.271
9376 4.276
9377 4.276
9378 4.180
9379 4.180
9380 4.276
9381 4.276
9382 4.270
9383 4.270
9384 4.270
9385 4.270
9386 4.233
9387 4.233
9388 4.272
9389 4.272
9390 4.272
9391 4.272
9392 4.271
9393 4.271
9394 4.271
9395 4.271
9396 4.275
9397 4.275
9398 4.271
9399 4.273
9400 4.273
9401 4.273
9402 4.273
9403 4.271
9404 4.271
9405 4.271
9406 4.271
9407 4.270
9408 4.270
9409 4.276
9410 4.276
9411 4.264
9412 4.264
9413 4.180
9414 4.180
9415 4.209
9416 4.209
9417 4.270
9418 4.270
9419 4.270
9420 4.270
9421 4.233
9422 4.233
9423 4.252
9424 4.252
9425 4.273
9426 4.273
9427 4.271
9428 4.271
9429 4.271
9430 4.271
9431 4.275
9432 4.275
9433 4.264
9434 4.264
9435 4.271
9436 4.271
9437 4.271
9438 4.271
9439 4.275
9440 4.275
9441 4.270
9442 4.271
9443 4.271
9444 4.270
9445 4.270
9446 4.180
9447 4.180
9448 4.180
9449 4.180
9450 4.270
9451 4.270
9452 4.233
9453 4.233
9454 4.233
9455 4.233
9456 4.272
9457 4.272
9458 4.273
9459 4.273
9460 4.275
9461 4.275
9462 4.271
9463 4.271
9464 4.271
9465 4.271
9466 4.271
9467 4.271
9468 4.271
9469 4.271
9470 4.264
9471 4.264
9472 4.264
9473 4.264
9474 4.180
9475 4.180
9476 4.270
9477 4.270
9478 4.270
9479 4.270
9480 4.270
9481 4.270
9482 4.270
9483 4.270
9484 4.209
9485 4.209
9486 4.233
9487 4.233
9488 4.276
9489 4.276
9490 4.180
9491 4.180
9492 4.276
9493 4.276
9494 4.270
9495 4.270
9496 4.270
9497 4.270
9498 4.270
9499 4.252
9500 4.252
9501 4.233
9502 4.233
9503 4.272
9504 4.272
9505 4.271
9506 4.271
9507 4.264
9508 4.264
9509 4.275
9510 4.275
9511 4.275
9512 4.275
9513 4.276
9514 4.276
9515 4.264
9516 4.264
9517 4.270
9518 4.270
9519 4.270
9520 4.270
9521 4.271
9522 4.271
9523 4.270
9524 4.270
9525 4.270
9526 4.270
9527 4.271
9528 4.271
9529 4.275
9530 4.275
9531 4.275
9532 4.275
9533 4.271
9534 4.271
9535 4.270
9536 4.273
9537 4.273
9538 4.275
9539 4.275
9540 4.270
9541 4.270
9542 4.276
9543 4.276
9544 4.276
9545 4.276
9546 4.180
9547 4.180
9548 4.276
9549 4.276
9550 4.270
9551 4.270
9552 4.270
9553 4.270
9554 4.270
9555 4.270
9556 4.270
9557 4.270
9558 4.233
9559 4.233
9560 4.273
9561 4.273
9562 4.271
9563 4.271
9564 4.270
9565 4.270
9566 4.270
9567 4.270
9568 4.276
9569 4.276
9570 4.264
9571 4.264
9572 4.270
9573 4.270
9574 4.270
9575 4.270
9576 4.270
9577 4.270
9578 4.270
9579 4.270
9580 4.270
9581 4.270
9582 4.276
9583 4.276
9584 4.180
9585 4.180
9586 4.180
9587 4.180
9588 4.270
9589 4.233
9590 4.233
9591 4.233
9592 4.233
9593 4.272
9594 4.272
9595 4.275
9596 4.275
9597 4.270
9598 4.270
9599 4.270
9600 4.270
9601 4.273
9602 4.273
9603 4.273
9604 4.273
9605 4.271
9606 4.271
9607 4.275
9608 4.275
9609 4.264
9610 4.264
9611 4.264
9612 4.264
9613 4.270
9614 4.270
9615 4.270
9616 4.270
9617 4.270
9618 4.270
9619 4.270
9620 4.270
9621 4.273
9622 4.273
9623 4.271
9624 4.271
9625 4.273
9626 4.273
9627 4.275
9628 4.275
9629 4.275
9630 4.275
9631 4.270
9632 4.270
9633 4.270
9634 4.270
9635 4.270
9636 4.270
9637 4.270
9638 4.276
9639 4.276
9640 4.180
9641 4.180
9642 4.270
9643 4.270
9644 4.270
9645 4.270
9646 4.270
9647 4.270
9648 4.233
9649 4.233
9650 4.272
9651 4.272
9652 4.271
9653 4.271
9654 4.270
9655 4.270
9656 4.271
9657 4.271
9658 4.271
9659 4.271
9660 4.270
9661 4.270
9662 4.270
9663 4.270
9664 4.264
9665 4.264
9666 4.270
9667 4.270
9668 4.270
9669 4.270
9670 4.276
9671 4.276
9672 4.276
9673 4.276
9674 4.180
9675 4.180
9676 4.270
9677 4.270
9678 4.233
9679 4.233
9680 4.271
9681 4.271
9682 4.270
9683 4.270
9684 4.273
9685 4.273
9686 4.271
9687 4.271
9688 4.275
9689 4.275
9690 4.270
9691 4.270
9692 4.270
9693 4.270
9694 4.264
9695 4.264
9696 4.180
9697 4.180
9698 4.180
9699 4.180
9700 4.270
9701 4.270
9702 4.209
9703 4.209
9704 4.209
9705 4.209
9706 4.233
9707 4.233
9708 4.233
9709 4.233
9710 4.270
9711 4.270
9712 4.252
9713 4.252
9714 4.252
9715 4.252
9716 4.264
9717 4.264
9718 4.264
9719 4.264
9720 4.271
9721 4.271
9722 4.273
9723 4.273
9724 4.273
9725 4.273
9726 4.275
9727 4.275
9728 4.180
9729 4.180
9730 4.209
9731 4.209
9732 4.271
9733 4.271
9734 4.271
9735 4.271
9736 4.270
9737 4.270
9738 4.270
9739 4.270
9740 4.233
9741 4.233
9742 4.276
9743 4.276
9744 4.180
9745 4.180
9746 4.270
9747 4.270
9748 4.270
9749 4.270
9750 4.270
9751 4.270
9752 4.270
9753 4.270
9754 4.252
9755 4.252
9756 4.233
9757 4.233
9758 4.275
9759 4.275
9760 4.275
9761 4.275
9762 4.264
9763 4.264
9764 4.271
9765 4.271
9766 4.270
9767 4.270
9768 4.264
9769 4.264
9770 4.270
9771 4.270
9772 4.270
9773 4.270
9774 4.271
9775 4.271
9776 4.276
9777 4.276
9778 4.276
9779 4.276
9780 4.276
9781 4.276
9782 4.270
9783 4.270
9784 4.275
9785 4.275
9786 4.270
9787 4.270
9788 4.273
9789 4.273
9790 4.271
9791 4.271
9792 4.271
9793 4.271
9794 4.275
9795 4.275
9796 4.270
9797 4.270
9798 4.276
9799 4.276
9800 4.276
9801 4.276
9802 4.180
9803 4.180
9804 4.276
9805 4.276
9806 4.270
9807 4.270
9808 4.233
9809 4.233
9810 4.275
9811 4.275
9812 4.275
9813 4.275
9814 4.273
9815 4.273
9816 4.276
9817 4.276
9818 4.264
9819 4.264
9820 4.270
9821 4.270
9822 4.270
9823 4.270
9824 4.276
9825 4.276
9826 4.180
9827 4.180
9828 4.270
9829 4.270
9830 4.270
9831 4.270
9832 4.233
9833 4.233
9834 4.273
9835 4.273
9836 4.273
9837 4.273
9838 4.275
9839 4.275
9840 4.270
9841 4.270
9842 4.271
9843 4.271
9844 4.275
9845 4.275
9846 4.264
9847 4.264
9848 4.270
9849 4.270
9850 4.270
9851 4.270
9852 4.180
9853 4.180
9854 4.270
9855 4.270
9856 4.270
9857 4.270
9858 4.233
9859 4.233
9860 4.272
9861 4.272
9862 4.272
9863 4.272
9864 4.273
9865 4.273
9866 4.273
9867 4.273
9868 4.271
9869 4.271
9870 4.275
9871 4.275
9872 4.270
9873 4.270
9874 4.264
9875 4.264
9876 4.276
9877 4.276
9878 4.270
9879 4.270
9880 4.272
9881 4.272
9882 4.271
9883 4.271
9884 4.271
9885 4.271
9886 4.275
9887 4.275
9888 4.270
9889 4.270
9890 4.270
9891 4.270
9892 4.270
9893 4.270
9894 4.276
9895 4.276
9896 4.180
9897 4.180
9898 4.270
9899 4.270
9900 4.233
9901 4.233
9902 4.271
9903 4.271
9904 4.271
9905 4.271
9906 4.271
9907 4.271
9908 4.273
9909 4.273
9910 4.271
9911 4.271
9912 4.270
9913 4.270
9914 4.264
9915 4.264
9916 4.180
9917 4.180
9918 4.270
9919 4.270
9920 4.270
9921 4.270
9922 4.209
9923 4.209
9924 4.270
9925 4.270
9926 4.233
9927 4.233
9928 4.276
9929 4.276
9930 4.270
9931 4.270
9932 4.252
9933 4.252
9934 4.264
9935 4.264
9936 4.271
9937 4.271
9938 4.273
9939 4.273
9940 4.275
9941 4.275
9942 4.180
9943 4.180
9944 4.270
9945 4.270
9946 4.270
9947 4.270
9948 4.209
9949 4.209
9950 4.271
9951 4.271
9952 4.233
9953 4.233
9954 4.252
9955 4.252
9956 4.275
9957 4.275
9958 4.264
9959 4.264
9960 4.273
9961 4.273
9962 4.271
9963 4.271
9964 4.270
9965 4.270
9966 4.270
9967 4.270
9968 4.271
9969 4.271
9970 4.270
9971 4.270
9972 4.276
9973 4.276
9974 4.180
9975 4.180
9976 4.276
9977 4.276
9978 4.270
9979 4.270
9980 4.270
9981 4.270
9982 4.270
9983 4.270
9984 4.233
9985 4.233
9986 4.275
9987 4.275
9988 4.271
9989 4.271
9990 4.276
9991 4.276
9992 4.264
9993 4.264
9994 4.270
9995 4.270
9996 4.270
9997 4.270
9998 4.270
9999 4.270
10000 4.276
10001 4.276
10002 4.270
10003 4.270
10004 4.275
10005 4.275
10006 4.270
10007 4.270
10008 4.270
10009 4.270
10010 4.273
10011 4.273
10012 4.271
10013 4.271
10014 4.275
10015 4.275
10016 4.276
10017 4.276
10018 4.180
10019 4.180
10020 4.209
10021 4.209
10022 4.233
10023 4.233
10024 4.270
10025 4.270
10026 4.252
10027 4.252
10028 4.273
10029 4.273
10030 4.275
10031 4.275
10032 4.264
10033 4.264
10034 4.270
10035 4.270
10036 4.270
10037 4.270
10038 4.271
10039 4.271
10040 4.270
10041 4.270
10042 4.276
10043 4.276
10044 4.270
10045 4.270
10046 4.270
10047 4.270
10048 4.270
10049 4.270
10050 4.272
10051 4.272
10052 4.273
10053 4.273
10054 4.275
10055 4.275
10056 4.271
10057 4.271
10058 4.270
10059 4.270
10060 4.180
10061 4.180
10062 4.276
10063 4.276
10064 4.270
10065 4.270
10066 4.270
10067 4.270
10068 4.233
10069 4.233
10070 4.272
10071 4.272
10072 4.271
10073 4.271
10074 4.273
10075 4.273
10076 4.270
10077 4.270
10078 4.270
10079 4.270
10080 4.276
10081 4.276
10082 4.264
10083 4.264
10084 4.180
10085 4.180
10086 4.270
10087 4.270
10088 4.209
10089 4.209
10090 4.233
10091 4.233
10092 4.252
10093 4.252
10094 4.271
10095 4.271
10096 4.275
10097 4.275
10098 4.264
10099 4.264
10100 4.271
10101 4.271
10102 4.275
10103 4.275
10104 4.270
10105 4.270
10106 4.270
10107 4.270
10108 4.271
10109 4.271
10110 4.270
10111 4.270
10112 4.180
10113 4.180
10114 4.180
10115 4.180
10116 4.270
10117 4.270
10118 4.233
10119 4.233
10120 4.233
10121 4.233
10122 4.273
10123 4.273
10124 4.275
10125 4.275
10126 4.271
10127 4.271
10128 4.271
10129 4.271
10130 4.264
10131 4.264
10132 4.264
10133 4.264
10134 4.270
10135 4.270
10136 4.270
10137 4.270
10138 4.276
10139 4.276
10140 4.276
10141 4.276
10142 4.272
10143 4.272
10144 4.275
10145 4.275
10146 4.275
10147 4.275
10148 4.276
10149 4.276
10150 4.270
10151 4.270
10152 4.270
10153 4.270
10154 4.270
10155 4.270
10156 4.271
10157 4.271
10158 4.275
10159 4.275
10160 4.273
10161 4.273
10162 4.270
10163 4.270
10164 4.270
10165 4.270
10166 4.276
10167 4.276
10168 4.276
10169 4.276
10170 4.270
10171 4.270
10172 4.270
10173 4.270
10174 4.273
10175 4.273
10176 4.271
10177 4.271
10178 4.270
10179 4.270
10180 4.180
10181 4.180
10182 4.180
10183 4.180
10184 4.209
10185 4.209
10186 4.209
10187 4.209
10188 4.270
10189 4.270
10190 4.233
10191 4.233
10192 4.233
10193 4.233
10194 4.180
10195 4.180
10196 4.252
10197 4.252
10198 4.252
10199 4.252
10200 4.233
10201 4.233
10202 4.272
10203 4.272
10204 4.264
10205 4.264
10206 4.264
10207 4.264
10208 4.270
10209 4.270
10210 4.273
10211 4.273
10212 4.273
10213 4.273
10214 4.271
10215 4.271
10216 4.264
10217 4.264
10218 4.270
10219 4.270
10220 4.271
10221 4.271
10222 4.271
10223 4.271
10224 4.180
10225 4.180
10226 4.270
10227 4.270
10228 4.233
10229 4.233
10230 4.271
10231 4.271
10232 4.275
10233 4.275
10234 4.275
10235 4.275
10236 4.275
10237 4.275
10238 4.264
10239 4.264
10240 4.270
10241 4.270
10242 4.270
10243 4.270
10244 4.276
10245 4.276
10246 4.276
10247 4.276
10248 4.270
10249 4.270
10250 4.270
10251 4.270
10252 4.271
10253 4.271
10254 4.271
10255 4.271
10256 4.271
10257 4.271
10258 4.275
10259 4.275
10260 4.270
10261 4.270
10262 4.276
10263 4.276
10264 4.276
10265 4.276
10266 4.276
10267 4.276
10268 4.180
10269 4.180
10270 4.180
10271 4.180
10272 4.270
10273 4.270
10274 4.233
10275 4.233
10276 4.233
10277 4.233
10278 4.275
10279 4.275
10280 4.275
10281 4.275
10282 4.270
10283 4.270
10284 4.270
10285 4.270
10286 4.264
10287 4.264
10288 4.264
10289 4.264
10290 4.270
10291 4.270
10292 4.276
10293 4.276
10294 4.273
10295 4.273
10296 4.273
10297 4.273
10298 4.273
10299 4.273
10300 4.275
10301 4.275
10302 4.275
10303 4.275
10304 4.270
10305 4.270
10306 4.270
10307 4.270
10308 4.270
10309 4.270
10310 4.270
10311 4.270
10312 4.270
10313 4.270
10314 4.272
10315 4.272
10316 4.272
10317 4.272
10318 4.273
10319 4.273
10320 4.270
10321 4.270
10322 4.276
10323 4.276
10324 4.276
10325 4.276
10326 4.180
10327 4.180
10328 4.180
10329 4.180
10330 4.233
10331 4.233
10332 4.233
10333 4.233
10334 4.271
10335 4.271
10336 4.271
10337 4.271
10338 4.270
10339 4.270
10340 4.271
10341 4.271
10342 4.270
10343 4.270
10344 4.264
10345 4.264
10346 4.264
10347 4.264
10348 4.271
10349 4.271
10350 4.271
10351 4.271
10352 4.273
10353 4.273
10354 4.273
10355 4.273
10356 4.271
10357 4.271
10358 4.275
10359 4.275
10360 4.275
10361 4.275
10362 4.270
10363 4.270
10364 4.270
10365 4.270
10366 4.270
10367 4.270
10368 4.270
10369 4.270
10370 4.270
10371 4.270
10372 4.270
10373 4.270
10374 4.276
10375 4.276
10376 4.276
10377 4.276
10378 4.270
10379 4.270
10380 4.271
10381 4.271
10382 4.271
10383 4.271
10384 4.270
10385 4.270
10386 4.180
10387 4.180
10388 4.270
10389 4.270
10390 4.270
10391 4.270
10392 4.270
10393 4.270
10394 4.233
10395 4.233
10396 4.273
10397 4.273
10398 4.273
10399 4.273
10400 4.264
10401 4.264
10402 4.270
10403 4.270
10404 4.270
10405 4.270
10406 4.180
10407 4.180
10408 4.233
10409 4.233
10410 4.270
10411 4.270
10412 4.270
10413 4.270
10414 4.275
10415 4.275
10416 4.264
10417 4.264
10418 4.180
10419 4.180
10420 4.270
10421 4.270
10422 4.209
10423 4.209
10424 4.233
10425 4.233
10426 4.270
10427 4.270
10428 4.270
10429 4.270
10430 4.252
10431 4.252
10432 4.264
10433 4.264
10434 4.271
10435 4.271
10436 4.271
10437 4.271
10438 4.275
10439 4.275
10440 4.180
10441 4.180
10442 4.180
10443 4.270
10444 4.270
10445 4.209
10446 4.209
10447 4.209
10448 4.271
10449 4.271
10450 4.233
10451 4.233
10452 4.233
10453 4.276
10454 4.276
10455 4.270
10456 4.270
10457 4.270
10458 4.270
10459 4.252
10460 4.252
10461 4.252
10462 4.275
10463 4.275
10464 4.264
10465 4.264
10466 4.264
10467 4.271
10468 4.271
10469 4.271
10470 4.276
10471 4.276
10472 4.276
10473 4.276
10474 4.275
10475 4.275
10476 4.275
10477 4.273
10478 4.273
10479 4.270
10480 4.270
10481 4.270
10482 4.270
10483 4.276
10484 4.276
10485 4.180
10486 4.180
10487 4.270
10488 4.270
10489 4.270
10490 4.270
10491 4.209
10492 4.209
10493 4.270
10494 4.270
10495 4.233
10496 4.233
10497 4.180
10498 4.180
10499 4.276
10500 4.276
10501 4.276
10502 4.270
10503 4.270
10504 4.270
10505 4.270
10506 4.252
10507 4.252
10508 4.233
10509 4.233
10510 4.275
10511 4.275
10512 4.264
10513 4.264
10514 4.273
10515 4.273
10516 4.276
10517 4.276
10518 4.276
10519 4.264
10520 4.264
10521 4.271
10522 4.271
10523 4.270
10524 4.270
10525 4.273
10526 4.273
10527 4.275
10528 4.275
10529 4.275
10530 4.275
10531 4.275
10532 4.271
10533 4.271
10534 4.275
10535 4.275
10536 4.276
10537 4.276
10538 4.272
10539 4.272
10540 4.273
10541 4.273
10542 4.273
10543 4.271
10544 4.271
10545 4.276
10546 4.276
10547 4.270
10548 4.270
10549 4.270
10550 4.270
10551 4.270
10552 4.270
10553 4.270
10554 4.270
10555 4.276
10556 4.276
10557 4.272
10558 4.272
10559 4.272
10560 4.271
10561 4.271
10562 4.275
10563 4.275
10564 4.270
10565 4.270
10566 4.273
10567 4.273
10568 4.271
10569 4.271
10570 4.271
10571 4.271
10572 4.271
10573 4.273
10574 4.273
10575 4.180
10576 4.180
10577 4.270
10578 4.270
10579 4.233
10580 4.233
10581 4.272
10582 4.272
10583 4.271
10584 4.271
10585 4.271
10586 4.264
10587 4.264
10588 4.180
10589 4.180
10590 4.270
10591 4.270
10592 4.209
10593 4.209
10594 4.270
10595 4.270
10596 4.270
10597 4.270
10598 4.233
10599 4.233
10600 4.180
10601 4.180
10602 4.252
10603 4.252
10604 4.233
10605 4.233
10606 4.271
10607 4.271
10608 4.264
10609 4.264
10610 4.271
10611 4.271
10612 4.275
10613 4.275
10614 4.264
10615 4.264
10616 4.270
10617 4.270
10618 4.270
10619 4.270
10620 4.270
10621 4.271
10622 4.271
10623 4.270
10624 4.270
10625 4.275
10626 4.275
10627 4.271
10628 4.271
10629 4.275
10630 4.275
10631 4.270
10632 4.270
10633 4.276
10634 4.276
10635 4.276
10636 4.276
10637 4.270
10638 4.270
10639 4.270
10640 4.270
10641 4.270
10642 4.276
10643 4.276
10644 4.270
10645 4.270
10646 4.276
10647 4.276
10648 4.270
10649 4.270
10650 4.275
10651 4.275
10652 4.270
10653 4.270
10654 4.270
10655 4.273
10656 4.273
10657 4.270
10658 4.270
10659 4.270
10660 4.270
10661 4.270
10662 4.270
10663 4.273
10664 4.273
10665 4.273
10666 4.273
10667 4.270
10668 4.270
10669 4.180
10670 4.180
10671 4.270
10672 4.270
10673 4.270
10674 4.233
10675 4.233
10676 4.272
10677 4.272
10678 4.270
10679 4.270
10680 4.271
10681 4.271
10682 4.270
10683 4.270
10684 4.264
10685 4.264
10686 4.270
10687 4.270
10688 4.180
10689 4.180
10690 4.233
10691 4.233
10692 4.271
10693 4.271
10694 4.271
10695 4.271
10696 4.275
10697 4.275
10698 4.270
10699 4.270
10700 4.270
10701 4.264
10702 4.264
10703 4.180
10704 4.180
10705 4.209
10706 4.209
10707 4.233
10708 4.233
10709 4.180
10710 4.180
10711 4.270
10712 4.270
10713 4.252
10714 4.252
10715 4.233
10716 4.233
10717 4.264
10718 4.264
10719 4.271
10720 4.271
10721 4.275
10722 4.275
10723 4.264
10724 4.264
10725 4.271
10726 4.271
10727 4.276
10728 4.276
10729 4.180
10730 4.180
10731 4.270
10732 4.270
10733 4.233
10734 4.233
10735 4.275
10736 4.275
10737 4.275
10738 4.275
10739 4.270
10740 4.270
10741 4.264
10742 4.264
10743 4.270
10744 4.270
10745 4.270
10746 4.270
10747 4.276
10748 4.276
10749 4.276
10750 4.276
10751 4.270
10752 4.270
10753 4.273
10754 4.273
10755 4.275
10756 4.275
10757 4.276
10758 4.276
10759 4.180
10760 4.180
10761 4.209
10762 4.209
10763 4.233
10764 4.233
10765 4.276
10766 4.276
10767 4.270
10768 4.270
10769 4.252
10770 4.252
10771 4.275
10772 4.275
10773 4.264
10774 4.264
10775 4.273
10776 4.273
10777 4.270
10778 4.270
10779 4.271
10780 4.271
10781 4.276
10782 4.276
10783 4.180
10784 4.180
10785 4.233
10786 4.233
10787 4.273
10788 4.273
10789 4.275
10790 4.275
10791 4.270
10792 4.270
10793 4.273
10794 4.273
10795 4.271
10796 4.271
10797 4.264
10798 4.264
10799 4.270
10800 4.270
10801 4.276
10802 4.276
10803 4.272
10804 4.272
10805 4.273
10806 4.273
10807 4.271
10808 4.271
10809 4.275
10810 4.275
10811 4.276
10812 4.276
10813 4.270
10814 4.270
10815 4.271
10816 4.271
10817 4.275
10818 4.275
10819 4.271
10820 4.271
10821 4.270
10822 4.270
10823 4.276
10824 4.276
10825 4.270
10826 4.270
10827 4.273
10828 4.273
10829 4.271
10830 4.271
10831 4.271
10832 4.271
10833 4.270
10834 4.270
10835 4.270
10836 4.270
10837 4.180
10838 4.180
10839 4.180
10840 4.180
10841 4.270
10842 4.270
10843 4.233
10844 4.233
10845 4.233
10846 4.233
10847 4.272
10848 4.272
10849 4.273
10850 4.273
10851 4.264
10852 4.264
10853 4.264
10854 4.264
10855 4.270
10856 4.270
10857 4.270
10858 4.270
10859 4.271
10860 4.271
10861 4.275
10862 4.275
10863 4.275
10864 4.275
10865 4.270
10866 4.270
10867 4.270
10868 4.270
10869 4.270
10870 4.270
10871 4.271
10872 4.271
10873 4.271
10874 4.271
10875 4.270
10876 4.270
10877 4.276
10878 4.276
10879 4.276
10880 4.276
10881 4.270
10882 4.270
10883 4.180
10884 4.180
10885 4.270
10886 4.270
10887 4.270
10888 4.270
10889 4.209
10890 4.209
10891 4.233
10892 4.233
10893 4.252
10894 4.252
10895 4.264
10896 4.264
10897 4.273
10898 4.273
10899 4.273
10900 4.273
10901 4.270
10902 4.270
10903 4.271
10904 4.271
10905 4.270
10906 4.270
10907 4.180
10908 4.180
10909 4.270
10910 4.270
10911 4.270
10912 4.270
10913 4.270
10914 4.270
10915 4.233
10916 4.233
10917 4.275
10918 4.275
10919 4.264
10920 4.264
10921 4.270
10922 4.270
10923 4.276
10924 4.276
10925 4.270
10926 4.270
10927 4.271
10928 4.271
10929 4.271
10930 4.271
10931 4.275
10932 4.275
10933 4.270
10934 4.270
10935 4.276
10936 4.276
10937 4.270
10938 4.270
10939 4.275
10940 4.275
10941 4.180
10942 4.180
10943 4.270
10944 4.270
10945 4.209
10946 4.209
10947 4.270
10948 4.270
10949 4.233
10950 4.233
10951 4.276
10952 4.276
10953 4.270
10954 4.270
10955 4.252
10956 4.252
10957 4.273
10958 4.273
10959 4.264
10960 4.264
10961 4.180
10962 4.180
10963 4.209
10964 4.209
10965 4.271
10966 4.271
10967 4.233
10968 4.233
10969 4.270
10970 4.270
10971 4.270
10972 4.270
10973 4.252
10974 4.252
10975 4.272
10976 4.272
10977 4.275
10978 4.275
10979 4.264
10980 4.264
10981 4.273
10982 4.273
10983 4.270
10984 4.270
10985 4.271
10986 4.271
10987 4.276
10988 4.276
10989 4.271
10990 4.271
10991 4.275
10992 4.275
10993 4.276
10994 4.276
10995 4.270
10996 4.270
10997 4.180
10998 4.180
10999 4.276
11000 4.276
11001 4.233
11002 4.233
11003 4.275
11004 4.275
11005 4.271
11006 4.271
11007 4.271
11008 4.271
11009 4.276
11010 4.276
11011 4.264
11012 4.264
11013 4.270
11014 4.270
11015 4.270
11016 4.270
11017 4.273
11018 4.273
11019 4.275
11020 4.275
11021 4.275
11022 4.275
11023 4.270
11024 4.270
11025 4.272
11026 4.272
11027 4.273
11028 4.273
11029 4.276
11030 4.276
11031 4.270
11032 4.270
11033 4.270
11034 4.270
11035 4.272
11036 4.272
11037 4.271
11038 4.271
11039 4.270
11040 4.270
11041 4.270
11042 4.270
11043 4.271
11044 4.271
11045 4.271
11046 4.271
11047 4.270
11048 4.270
11049 4.273
11050 4.273
11051 4.180
11052 4.180
11053 4.209
11054 4.209
11055 4.233
11056 4.233
11057 4.252
11058 4.252
11059 4.264
11060 4.264
11061 4.271
11062 4.271
11063 4.270
11064 4.270
11065 4.270
11066 4.270
11067 4.271
11068 4.271
11069 4.180
11070 4.180
11071 4.270
11072 4.270
11073 4.233
11074 4.233
11075 4.275
11076 4.275
11077 4.271
11078 4.271
11079 4.264
11080 4.264
11081 4.270
11082 4.270
11083 4.180
11084 4.180
11085 4.180
11086 4.180
11087 4.276
11088 4.276
11089 4.270
11090 4.270
11091 4.233
11092 4.233
11093 4.233
11094 4.233
11095 4.275
11096 4.275
11097 4.270
11098 4.270
11099 4.276
11100 4.276
11101 4.264
11102 4.264
11103 4.264
11104 4.264
11105 4.270
11106 4.270
11107 4.275
11108 4.275
11109 4.270
11110 4.270
11111 4.275
11112 4.275
11113 4.275
11114 4.275
11115 4.270
11116 4.270
11117 4.276
11118 4.276
11119 4.180
11120 4.180
11121 4.270
11122 4.270
11123 4.233
11124 4.233
11125 4.273
11126 4.273
11127 4.270
11128 4.270
11129 4.264
11130 4.264
11131 4.276
11132 4.276
11133 4.276
11134 4.276
11135 4.270
11136 4.270
11137 4.272
11138 4.272
11139 4.273
11140 4.273
11141 4.275
11142 4.275
11143 4.270
11144 4.270
11145 4.271
11146 4.271
11147 4.273
11148 4.273
11149 4.273
11150 4.273
11151 4.270
11152 4.270
11153 4.270
11154 4.270
11155 4.276
11156 4.276
11157 4.180
11158 4.180
11159 4.233
11160 4.233
11161 4.271
11162 4.271
11163 4.271
11164 4.271
11165 4.270
11166 4.270
11167 4.264
11168 4.264
11169 4.273
11170 4.273
11171 4.271
11172 4.271
11173 4.271
11174 4.271
11175 4.275
11176 4.275
11177 4.270
11178 4.270
11179 4.270
11180 4.270
11181 4.276
11182 4.276
11183 4.270
11184 4.270
11185 4.270
11186 4.270
11187 4.271
11188 4.271
11189 4.180
11190 4.180
11191 4.270
11192 4.270
11193 4.270
11194 4.270
11195 4.233
11196 4.233
11197 4.270
11198 4.270
11199 4.273
11200 4.273
11201 4.264
11202 4.264
11203 4.180
11204 4.180
11205 4.209
11206 4.209
11207 4.233
11208 4.233
11209 4.252
11210 4.252
11211 4.264
11212 4.264
11213 4.275
11214 4.275
11215 4.270
11216 4.270
11217 4.271
11218 4.271
11219 4.270
11220 4.270
11221 4.270
11222 4.270
11223 4.275
11224 4.275
11225 4.271
11226 4.271
11227 4.270
11228 4.270
11229 4.270
11230 4.270
11231 4.276
11232 4.276
11233 4.276
11234 4.276
11235 4.270
11236 4.270
11237 4.276
11238 4.276
11239 4.180
11240 4.209
11241 4.233
11242 4.252
11243 4.275
11244 4.275
11245 4.264
11246 4.273
11247 4.273
11248 4.270
11249 4.270
11250 4.271
11251 4.270
11252 4.270
11253 4.180
11254 4.180
11255 4.270
11256 4.270
11257 4.233
11258 4.233
11259 4.273
11260 4.273
11261 4.275
11262 4.264
11263 4.264
11264 4.180
11265 4.180
11266 4.209
11267 4.209
11268 4.270
11269 4.270
11270 4.270
11271 4.270
11272 4.233
11273 4.233
11274 4.276
11275 4.252
11276 4.252
11277 4.272
11278 4.272
11279 4.264
11280 4.264
11281 4.271
11282 4.271
11283 4.275
11284 4.275
11285 4.276
11286 4.271
11287 4.271
11288 4.271
11289 4.271
11290 4.275
11291 4.275
11292 4.275
11293 4.270
11294 4.270
11295 4.270
11296 4.270
11297 4.276
11298 4.276
11299 4.276
11300 4.276
11301 4.273
11302 4.271
11303 4.271
11304 4.276
11305 4.276
11306 4.270
11307 4.270
11308 4.272
11309 4.275
11310 4.275
11311 4.273
11312 4.273
11313 4.270
11314 4.270
11315 4.273
11316 4.273
11317 4.271
11318 4.270
11319 4.270
11320 4.180
11321 4.180
11322 4.270
11323 4.270
11324 4.233
11325 4.233
11326 4.272
11327 4.272
11328 4.271
11329 4.271
11330 4.271
11331 4.264
11332 4.264
11333 4.180
11334 4.180
11335 4.270
11336 4.270
11337 4.209
11338 4.209
11339 4.233
11340 4.233
11341 4.252
11342 4.252
11343 4.271
11344 4.271
11345 4.264
11346 4.264
11347 4.270
11348 4.270
11349 4.275
11350 4.275
11351 4.270
11352 4.271
11353 4.271
11354 4.275
11355 4.275
11356 4.271
11357 4.271
11358 4.276
11359 4.276
11360 4.276
11361 4.276
11362 4.270
11363 4.270
11364 4.270
11365 4.270
11366 4.270
11367 4.276
11368 4.276
11369 4.270
11370 4.270
11371 4.270
11372 4.270
11373 4.275
11374 4.275
11375 4.270
11376 4.273
11377 4.273
11378 4.270
11379 4.270
11380 4.270
11381 4.270
11382 4.273
11383 4.273
11384 4.270
11385 4.270
11386 4.270
11387 4.272
11388 4.272
11389 4.270
11390 4.270
11391 4.271
11392 4.271
11393 4.180
11394 4.180
11395 4.233
11396 4.233
11397 4.271
11398 4.271
11399 4.270
11400 4.264
11401 4.264
11402 4.180
11403 4.180
11404 4.270
11405 4.270
11406 4.233
11407 4.233
11408 4.271
11409 4.271
11410 4.275
11411 4.275
11412 4.264
11413 4.264
11414 4.270
11415 4.270
11416 4.270
11417 4.270
11418 4.275
11419 4.275
11420 4.270
11421 4.270
11422 4.270
11423 4.270
11424 4.276
11425 4.276
11426 4.180
11427 4.180
11428 4.233
11429 4.233
11430 4.264
11431 4.264
11432 4.180
11433 4.180
11434 4.209
11435 4.209
11436 4.233
11437 4.233
11438 4.276
11439 4.276
11440 4.270
11441 4.270
11442 4.252
11443 4.252
11444 4.264
11445 4.264
11446 4.273
11447 4.273
11448 4.275
11449 4.275
11450 4.270
11451 4.270
11452 4.271
11453 4.271
11454 4.275
11455 4.275
11456 4.270
11457 4.270
11458 4.273
11459 4.273
11460 4.276
11461 4.276
11462 4.180
11463 4.180
11464 4.276
11465 4.276
11466 4.233
11467 4.233
11468 4.271
11469 4.271
11470 4.276
11471 4.276
11472 4.264
11473 4.264
11474 4.270
11475 4.270
11476 4.275
11477 4.275
11478 4.273
11479 4.273
11480 4.271
11481 4.271
11482 4.275
11483 4.275
11484 4.270
11485 4.270
11486 4.273
11487 4.273
11488 4.270
11489 4.270
11490 4.276
11491 4.276
11492 4.270
11493 4.270
11494 4.272
11495 4.272
11496 4.271
11497 4.271
11498 4.180
11499 4.180
11500 4.270
11501 4.270
11502 4.233
11503 4.233
11504 4.271
11505 4.271
11506 4.273
11507 4.273
11508 4.264
11509 4.264
11510 4.271
11511 4.271
11512 4.275
11513 4.275
11514 4.270
11515 4.270
11516 4.270
11517 4.270
11518 4.271
11519 4.271
11520 4.270
11521 4.270
11522 4.270
11523 4.270
11524 4.276
11525 4.276
11526 4.270
11527 4.270
11528 4.273
11529 4.273
11530 4.180
11531 4.180
11532 4.270
11533 4.270
11534 4.209
11535 4.209
11536 4.270
11537 4.270
11538 4.233
11539 4.233
11540 4.180
11541 4.180
11542 4.270
11543 4.270
11544 4.252
11545 4.252
11546 4.233
11547 4.233
11548 4.264
11549 4.264
11550 4.270
11551 4.270
11552 4.264
11553 4.264
11554 4.271
11555 4.271
11556 4.270
11557 4.270
11558 4.275
11559 4.275
11560 4.271
11561 4.271
11562 4.275
11563 4.275
11564 4.276
11565 4.276
11566 4.270
11567 4.270
11568 4.276
11569 4.276
11570 4.270
11571 4.270
11572 4.270
11573 4.270
11574 4.276
11575 4.276
11576 4.275
11577 4.275
11578 4.270
11579 4.270
11580 4.180
11581 4.180
11582 4.209
11583 4.209
11584 4.233
11585 4.233
11586 4.270
11587 4.270
11588 4.252
11589 4.252
11590 4.273
11591 4.273
11592 4.264
11593 4.264
11594 4.273
11595 4.273
11596 4.271
11597 4.271
11598 4.272
11599 4.272
11600 4.275
11601 4.275
11602 4.270
11603 4.270
11604 4.276
11605 4.276
11606 4.271
11607 4.271
11608 4.271
11609 4.271
11610 4.276
11611 4.276
11612 4.270
11613 4.270
11614 4.275
11615 4.275
11616 4.271
11617 4.271
11618 4.273
11619 4.273
11620 4.270
11621 4.270
11622 4.270
11623 4.270
11624 4.272
11625 4.272
11626 4.270
11627 4.270
11628 4.270
11629 4.270
11630 4.271
11631 4.271
11632 4.271
11633 4.271
11634 4.270
11635 4.270
11636 4.180
11637 4.180
11638 4.270
11639 4.270
11640 4.209
11641 4.209
11642 4.233
11643 4.233
11644 4.252
11645 4.252
11646 4.264
11647 4.264
11648 4.270
11649 4.270
11650 4.271
11651 4.271
11652 4.270
11653 4.270
11654 4.275
11655 4.275
11656 4.180
11657 4.180
11658 4.276
11659 4.276
11660 4.270
11661 4.270
11662 4.233
11663 4.233
11664 4.270
11665 4.270
11666 4.276
11667 4.276
11668 4.264
11669 4.264
11670 4.270
11671 4.270
11672 4.180
11673 4.180
11674 4.233
11675 4.233
11676 4.275
11677 4.275
11678 4.270
11679 4.270
11680 4.275
11681 4.275
11682 4.264
11683 4.264
11684 4.273
11685 4.273
11686 4.275
11687 4.275
11688 4.276
11689 4.276
11690 4.180
11691 4.180
11692 4.270
11693 4.270
11694 4.233
11695 4.233
11696 4.272
11697 4.272
11698 4.264
11699 4.264
11700 4.276
11701 4.276
11702 4.271
11703 4.271
11704 4.273
11705 4.273
11706 4.275
11707 4.275
11708 4.270
11709 4.270
11710 4.271
11711 4.271
11712 4.273
11713 4.273
11714 4.276
11715 4.276
11716 4.180
11717 4.180
11718 4.233
11719 4.233
11720 4.271
11721 4.271
11722 4.264
11723 4.264
11724 4.270
11725 4.270
11726 4.273
11727 4.273
11728 4.271
11729 4.271
11730 4.275
11731 4.275
11732 4.270
11733 4.270
11734 4.276
11735 4.276
11736 4.270
11737 4.270
11738 4.270
11739 4.270
11740 4.271
11741 4.271
11742 4.180
11743 4.180
11744 4.270
11745 4.270
11746 4.233
11747 4.233
11748 4.273
11749 4.273
11750 4.264
11751 4.264
11752 4.270
11753 4.270
11754 4.275
11755 4.275
11756 4.270
11757 4.270
11758 4.270
11759 4.270
11760 4.271
11761 4.271
11762 4.270
11763 4.270
11764 4.270
11765 4.270
11766 4.276
11767 4.276
11768 4.273
11769 4.273
11770 4.180
11771 4.270
11772 4.270
11773 4.209
11774 4.270
11775 4.270
11776 4.233
11777 4.270
11778 4.270
11779 4.252
11780 4.264
11781 4.271
11782 4.270
11783 4.270
11784 4.275
11785 4.271
11786 4.271
11787 4.180
11788 4.180
11789 4.209
11790 4.209
11791 4.233
11792 4.233
11793 4.276
11794 4.252
11795 4.252
11796 4.264
11797 4.264
11798 4.276
11799 4.270
11800 4.270
11801 4.271
11802 4.271
11803 4.270
11804 4.270
11805 4.275
11806 4.275
11807 4.275
11808 4.276
11809 4.276
11810 4.270
11811 4.270
11812 4.273
11813 4.276
11814 4.276
11815 4.272
11816 4.275
11817 4.275
11818 4.270
11819 4.270
11820 4.273
11821 4.273
11822 4.271
11823 4.270
11824 4.270
11825 4.272
11826 4.272
11827 4.271
11828 4.180
11829 4.180
11830 4.209
11831 4.209
11832 4.233
11833 4.233
11834 4.252
11835 4.252
11836 4.271
11837 4.271
11838 4.264
11839 4.264
11840 4.270
11841 4.271
11842 4.271
11843 4.275
11844 4.275
11845 4.271
11846 4.271
11847 4.270
11848 4.270
11849 4.276
11850 4.276
11851 4.270
11852 4.276
11853 4.276
11854 4.270
11855 4.270
11856 4.275
11857 4.275
11858 4.270
11859 4.270
11860 4.270
11861 4.273
11862 4.273
11863 4.270
11864 4.272
11865 4.272
11866 4.270
11867 4.270
11868 4.271
11869 4.271
11870 4.270
11871 4.180
11872 4.180
11873 4.270
11874 4.270
11875 4.233
11876 4.233
11877 4.271
11878 4.271
11879 4.264
11880 4.264
11881 4.180
11882 4.180
11883 4.233
11884 4.233
11885 4.275
11886 4.275
11887 4.270
11888 4.270
11889 4.264
11890 4.264
11891 4.270
11892 4.270
11893 4.275
11894 4.275
11895 4.276
11896 4.276
11897 4.180
11898 4.180
11899 4.270
11900 4.270
11901 4.233
11902 4.233
11903 4.264
11904 4.264
11905 4.276
11906 4.276
11907 4.270
11908 4.270
11909 4.273
11910 4.273
11911 4.275
11912 4.275
11913 4.273
11914 4.273
11915 4.276
11916 4.276
11917 4.180
11918 4.180
11919 4.270
11920 4.270
11921 4.233
11922 4.233
11923 4.271
11924 4.271
11925 4.264
11926 4.264
11927 4.273
11928 4.273
11929 4.271
11930 4.271
11931 4.275
11932 4.275
11933 4.270
11934 4.270
11935 4.276
11936 4.276
11937 4.270
11938 4.270
11939 4.271
11940 4.271
11941 4.270
11942 4.270
11943 4.273
11944 4.273
11945 4.270
11946 4.270
11947 4.270
11948 4.270
11949 4.271
11950 4.271
11951 4.270
11952 4.270
11953 4.270
11954 4.270
11955 4.270
11956 4.270
11957 4.270
11958 4.270
11959 4.180
11960 4.180
11961 4.209
11962 4.209
11963 4.270
11964 4.270
11965 4.233
11966 4.233
11967 4.252
11968 4.252
11969 4.264
11970 4.264
11971 4.271
11972 4.271
11973 4.275
11974 4.275
11975 4.270
11976 4.270
11977 4.270
11978 4.270
11979 4.276
11980 4.276
11981 4.276
11982 4.276
11983 4.275
11984 4.275
11985 4.180
11986 4.180
11987 4.209
11988 4.209
11989 4.233
11990 4.233
11991 4.252
11992 4.252
11993 4.273
11994 4.273
11995 4.264
11996 4.264
11997 4.271
11998 4.271
11999 4.270
12000 4.270
12001 4.272
12002 4.272
12003 4.275
12004 4.275
12005 4.276
12006 4.276
12007 4.271
12008 4.271
12009 4.276
12010 4.276
12011 4.275
12012 4.275
12013 4.271
12014 4.271
12015 4.273
12016 4.273
12017 4.270
12018 4.270
12019 4.272
12020 4.272
12021 4.270
12022 4.270
12023 4.271
12024 4.271
12025 4.271
12026 4.271
12027 4.270
12028 4.270
12029 4.270
12030 4.270
12031 4.270
12032 4.270
12033 4.270
12034 4.270
12035 4.270
12036 4.270
12037 4.180
12038 4.180
12039 4.233
12040 4.233
12041 4.270
12042 4.270
12043 4.264
12044 4.264
12045 4.180
12046 4.180
12047 4.233
12048 4.233
12049 4.275
12050 4.275
12051 4.264
12052 4.264
12053 4.270
12054 4.270
12055 4.275
12056 4.275
12057 4.276
12058 4.276
12059 4.180
12060 4.180
12061 4.233
12062 4.233
12063 4.270
12064 4.270
12065 4.264
12066 4.264
12067 4.276
12068 4.276
12069 4.273
12070 4.273
12071 4.275
12072 4.275
12073 4.273
12074 4.273
12075 4.276
12076 4.276
12077 4.271
12078 4.271
12079 4.273
12080 4.273
12081 4.271
12082 4.271
12083 4.270
12084 4.270
12085 4.271
12086 4.271
12087 4.270
12088 4.270
12089 4.270
12090 4.270
12091 4.270
12092 4.270
12093 4.270
12094 4.270
12095 4.270
12096 4.270
12097 4.270
12098 4.270
12099 4.180
12100 4.209
12101 4.270
12102 4.270
12103 4.233
12104 4.252
12105 4.264
12106 4.271
12107 4.275
12108 4.180
12109 4.180
12110 4.209
12111 4.209
12112 4.270
12113 4.270
12114 4.233
12115 4.233
12116 4.276
12117 4.252
12118 4.252
12119 4.264
12120 4.264
12121 4.276
12122 4.271
12123 4.271
12124 4.275
12125 4.275
12126 4.275
12127 4.276
12128 4.276
12129 4.273
12130 4.276
12131 4.276
12132 4.272
12133 4.275
12134 4.275
12135 4.273
12136 4.273
12137 4.271
12138 4.272
12139 4.272
12140 4.271
12141 4.271
12142 4.271
12143 4.270
12144 4.271
12145 4.271
12146 4.270
12147 4.270
12148 4.270
12149 4.270
12150 4.270
12151 4.270
12152 4.270
12153 4.270
12154 4.270
12155 4.270
12156 4.270
12157 4.270
12158 4.180
12159 4.180
12160 4.233
12161 4.233
12162 4.270
12163 4.270
12164 4.264
12165 4.264
12166 4.180
12167 4.180
12168 4.233
12169 4.233
12170 4.275
12171 4.275
12172 4.264
12173 4.264
12174 4.275
12175 4.275
12176 4.276
12177 4.276
12178 4.276
12179 4.276
12180 4.273
12181 4.273
12182 4.273
12183 4.273
12184 4.271
12185 4.271
12186 4.271
12187 4.271
12188 4.270
12189 4.270
12190 4.270
12191 4.270
12192 4.270
12193 4.270
12194 4.270
12195 4.270
12196 4.270
12197 4.270
12198 4.270
12199 4.270
12200 4.180
12201 4.180
12202 4.209
12203 4.209
12204 4.233
12205 4.233
12206 4.252
12207 4.252
12208 4.264
12209 4.264
12210 4.271
12211 4.271
12212 4.275
12213 4.275
12214 4.276
12215 4.276
12216 4.276
12217 4.276
12218 4.275
12219 4.275
12220 4.273
12221 4.273
12222 4.272
12223 4.272
12224 4.271
12225 4.271
12226 4.271
12227 4.271
12228 4.270
12229 4.270
12230 4.270
12231 4.270
12232 4.270
12233 4.270
12234 4.270
12235 4.270
12236 4.270
12237 4.270
12238 4.180
12239 4.180
12240 4.233
12241 4.233
12242 4.264
12243 4.264
12244 4.275
12245 4.275
12246 4.276
12247 4.276
12248 4.273
12249 4.273
12250 4.271
12251 4.271
12252 4.270
12253 4.270
12254 4.270
12255 4.270
12256 4.270
12257 4.270
12258 4.180
12259 4.209
12260 4.233
12261 4.252
12262 4.264
12263 4.271
12264 4.275
12265 4.276
12266 4.276
12267 4.275
12268 4.273
12269 4.272
12270 4.271
12271 4.271
12272 4.270
12273 4.270
12274 4.270
12275 4.270
12276 4.270
End Values
-----Original Message-----
From: ...
[GiDlist] Graphic Error
Send by: Tontavanich, Bituporn Miguel, Attached contains all files of the problem. Thank you. Bituporn Tontavanich -----Original Message----- From: gidlist-admin at gid.cimne.upc.edu [mailto:gidlist-admin at gid.cimne.upc.edu] On Behalf Of miguel at cimne.upc.edu Sent: Wednesday, February 18, 2009 1:54 AM To: gidlist at gid.cimne.upc.edu Subject: Re: [GiDlist] Graphic Error Heelo, can you provide as with an example, so that we can check and look for the error? Miguel Pasenau >... [GiDlist] Graphic Error
Send by: miguel Thanks, Skip the message i send you when one of your messages was rejected. Miguel Pasenau -- ---------------------------------------------------------------- Miguel Pasenau @: miguel at cimne.upc.edu Despacho C2, Edifico C1, Campus Norte UPC, c/ Gran Capitán s/n 08034 - Barcelona ( SPAIN) T: +34 3 93 401 74 03 F: +34 3 93 401 65 17 ---------------------------------------------------------------- IMPORTANT NOTICE All personal data contained in this mail will be processed confidentially and stored in a file property of CIMNE in order to manage corporate communications. You may exercise the right of access, rectification, deletion and objection by letter sent to CIMNE, Gran Capitán, Edificio C1 - Campus Norte UPC, 08034 Barcelona, Spain. -----Mensaje original----- De: ... [GiDlist] Graphic Error
Send by: Tontavanich, Bituporn Hi Miguel, Did you receive my files? Have you figured out what went wrong? Thank you. Bituporn Tontavanich -----Original Message----- From: gidlist-admin at gid.cimne.upc.edu [mailto:gidlist-admin at gid.cimne.upc.edu] On Behalf Of miguel Sent: Wednesday, February 18, 2009 1:06 PM To: gidlist at gid.cimne.upc.edu Subject: RE: [GiDlist] Graphic Error Thanks, Skip the message i send you when one of your messages was rejected. Miguel Pasenau -- ---------------------------------------------------------------- Miguel Pasenau @: ... [GiDlist] Graphic Error
Send by: miguel Hi, Yes i got the files correctly. Miguel Pasenau -- ---------------------------------------------------------------- Miguel Pasenau @: miguel at cimne.upc.edu Despacho C2, Edifico C1, Campus Norte UPC, c/ Gran Capitán s/n 08034 - Barcelona ( SPAIN) T: +34 3 93 401 74 03 F: +34 3 93 401 65 17 ---------------------------------------------------------------- IMPORTANT NOTICE All personal data contained in this mail will be processed confidentially and stored in a file property of CIMNE in order to manage corporate communications. You may exercise the right of access, rectification, deletion and objection by letter sent to CIMNE, Gran Capitán, Edificio C1 - Campus Norte UPC, 08034 Barcelona, Spain. -----Mensaje original----- De: ... [GiDlist] Graphic Error
Send by: Willy S Problem with the file output format.. Better send the file output format to Miguel All the best ________________________________ From: "Tontavanich, Bituporn" <bituporn.tontavanich at okstate.edu> To: "gidlist at gid.cimne.upc.edu" <gidlist at gid.cimne.upc.edu> Sent: Tuesday, February 17, 2009 6:28:12 PM Subject: [GiDlist] Graphic Error GiD team, I am using GiD version 9.0.2. When showing the results in post-process, the graphic error appears as shown below. Do you know what happen and how to get rid of those small triangles? Thank you. Bituporn Tontavanich -------------- next part -------------- An HTML attachment was scrubbed... URL: ... [GiDlist] Graphic Error
Send by: miguel Hello, When you do a graph, like ‘line graph’, GiD, in the model view, shows a line where you have done the graph, and, in theory, the small triangles represent the direction of the graph, like in these pictures: I’ll take a look in your example to see what the problem is with the picture you send me. Best regards, Miguel Pasenau -- ---------------------------------------------------------------- Miguel Pasenau @: miguel at cimne.upc.edu Despacho C2, Edifico C1, Campus Norte UPC, c/ Gran Capitán s/n 08034 - Barcelona ( SPAIN) T: +34 3 93 401 74 03 F: +34 3 93 401 65 17 ---------------------------------------------------------------- IMPORTANT NOTICE All personal data contained in this mail will be processed confidentially and stored in a file property of CIMNE in order to manage corporate communications. You may exercise the right of access, rectification, deletion and objection by letter sent to CIMNE, Gran Capitán, Edificio C1 - Campus Norte UPC, 08034 Barcelona, Spain. _____ De: ... [GiDlist] Graphic Error
Send by: miguel Hi, Where are you running, a linux box with an ATI Graphics card? Can you send me the contents of the Help-->about-->More Window? Best regards, Miguel Pasenau -- ---------------------------------------------------------------- Miguel Pasenau @: miguel at cimne.upc.edu Despacho C2, Edifico C1, Campus Norte UPC, c/ Gran Capitán s/n 08034 - Barcelona ( SPAIN) T: +34 3 93 401 74 03 F: +34 3 93 401 65 17 ---------------------------------------------------------------- IMPORTANT NOTICE All personal data contained in this mail will be processed confidentially and stored in a file property of CIMNE in order to manage corporate communications. You may exercise the right of access, rectification, deletion and objection by letter sent to CIMNE, Gran Capitán, Edificio C1 - Campus Norte UPC, 08034 Barcelona, Spain. _____ De: ... [GiDlist] Graphic Error
Send by: Tontavanich, Bituporn Hi,
Here it is.
Thank you.
Bituporn Tontavanich
GiD internal version: 9.0.2
Operating system: 'intel' 'windows' 'Windows NT' '5.1'
Tcl8.5.1 Tk8.5(8.5.1)
Asked for an acceleratedrenderer,
Hardware accelerated (ICD) implementation, PixelFormat 2,
DoubleBuffer: yes,
RGBA,Draw to Window,OpenGL support,
Using 32 Color bits: 8 red, 8 green, 8 blue and 0 alpha,
Using 0 Accumulation bits: 0 red, 0 green, 0 blue and 0 alpha,
Using 32 Depth bits and 0 StencilBits
0 Auxiliary buffers
OpenGl:
VENDOR: {ATI Technologies Inc.}
RENDERER: {ATI Radeon HD 2600 XT}
VERSION: {2.1.7415 Release}
DISPLAY INFORMATION: {bits red 8, green 8, blue 8, alpha 8, depth 24, stencil 8, stereo no.}
EXTENSIONS: {GL_AMD_performance_monitor GL_ARB_depth_texture GL_ARB_draw_buffers
GL_ARB_fragment_program GL_ARB_fragment_shader GL_ARB_multisample
GL_ARB_multitexture GL_ARB_occlusion_query GL_ARB_pixel_buffer_object
GL_ARB_point_parameters GL_ARB_point_sprite GL_ARB_shader_objects
GL_ARB_shading_language_100 GL_ARB_shadow GL_ARB_shadow_ambient
GL_ARB_texture_border_clamp GL_ARB_texture_compression GL_ARB_texture_cube_map
GL_ARB_texture_env_add GL_ARB_texture_env_combine GL_ARB_texture_env_crossbar
GL_ARB_texture_env_dot3 GL_ARB_texture_float GL_ARB_texture_mirrored_repeat
GL_ARB_texture_non_power_of_two GL_ARB_texture_rectangle GL_ARB_transpose_matrix
GL_ARB_vertex_buffer_object GL_ARB_vertex_program GL_ARB_vertex_shader
GL_ARB_window_pos GL_ATI_draw_buffers GL_ATI_envmap_bumpmap
GL_ATI_fragment_shader GL_ATI_meminfo GL_ATI_separate_stencil
GL_ATI_texture_compression_3dc GL_ATI_texture_env_combine3 GL_ATI_texture_float
GL_EXT_abgr GL_EXT_bgra GL_EXT_blend_color
GL_EXT_blend_func_separate GL_EXT_blend_minmax GL_EXT_blend_subtract
GL_EXT_compiled_vertex_array GL_EXT_copy_texture GL_EXT_draw_range_elements
GL_EXT_fog_coord GL_EXT_framebuffer_object GL_EXT_framebuffer_sRGB
GL_EXT_gpu_program_parameters GL_EXT_multi_draw_arrays GL_EXT_packed_depth_stencil
GL_EXT_packed_pixels GL_EXT_point_parameters GL_EXT_rescale_normal
GL_EXT_secondary_color GL_EXT_separate_specular_color GL_EXT_shadow_funcs
GL_EXT_stencil_wrap GL_EXT_subtexture GL_EXT_texgen_reflection
GL_EXT_texture3D GL_EXT_texture_compression_s3tc GL_EXT_texture_cube_map
GL_EXT_texture_edge_clamp GL_EXT_texture_env_add GL_EXT_texture_env_combine
GL_EXT_texture_env_dot3 GL_EXT_texture_filter_anisotropic GL_EXT_texture_lod_bias
GL_EXT_texture_mirror_clamp GL_EXT_texture_object GL_EXT_texture_rectangle
GL_EXT_texture_sRGB GL_EXT_vertex_array GL_KTX_buffer_region
GL_NV_blend_square GL_NV_texgen_reflection GL_SGIS_generate_mipmap
GL_SGIS_texture_edge_clamp GL_SGIS_texture_lod GL_WIN_swap_hint
WGL_EXT_swap_control }
GLX::
SERVER:
OVERLAY: 0
OVERLAY IN MENU: 0
From: ...
[GiDlist] Graphic Error
Send by: miguel Hello, I found the problem, Try setting the ‘Options-->Contour-->Bright color’ to ‘No’ in the top menu bar. It solved the problem? Miguel Pasenau -- ---------------------------------------------------------------- Miguel Pasenau @: miguel at cimne.upc.edu Despacho C2, Edifico C1, Campus Norte UPC, c/ Gran Capitán s/n 08034 - Barcelona ( SPAIN) T: +34 3 93 401 74 03 F: +34 3 93 401 65 17 ---------------------------------------------------------------- IMPORTANT NOTICE All personal data contained in this mail will be processed confidentially and stored in a file property of CIMNE in order to manage corporate communications. You may exercise the right of access, rectification, deletion and objection by letter sent to CIMNE, Gran Capitán, Edificio C1 - Campus Norte UPC, 08034 Barcelona, Spain. _____ De: ... [GiDlist] Graphic Error
Send by: Tontavanich, Bituporn Hi Miguel, Thank you for your reply. Yes, it looks better. But I still can see those small triangles. Don' t you think there is any problem with my video card? I tried this problem on another computer (with Options>Contour>Bright color>Metallic) and found no problem. Bituporn Tontavanich From: gidlist-admin at gid.cimne.upc.edu [mailto:gidlist-admin at gid.cimne.upc.edu] On Behalf Of miguel Sent: Monday, March 02, 2009 9:10 AM To: gidlist at gid.cimne.upc.edu... [GiDlist] Graphic Error
Send by: miguel Hi, I guess you see, in some faces of the hexahedra, some little triangles where one of the vertices is black, or with another colour. Is that right? The problem is related to the ATI driver (in MS Windows too) which, when ColorMaterial is used, does no allow the change of Color and Normals inside the definition of a sequence of triangles. OpenGL specification says that this is allowed. In the next beta, which we’ll release very soon, the problem with the partial black triangles has been overcome. Thanks for the info, Best regards, Miguel Pasenau -- ---------------------------------------------------------------- Miguel Pasenau @: ... [GiDlist] Graphic Error
Send by: Tontavanich, Bituporn Hi, Yes, I think you are correct: one of the vertices is black. Will the problem exist on NVIDIA Geforce? Thank you. Bituporn Tontavanich [cid:image002.png at 01C99BE0.CFB0CD60] From: gidlist-admin at gid.cimne.upc.edu [mailto:gidlist-admin at gid.cimne.upc.edu] On Behalf Of miguel Sent: Tuesday, March 03, 2009 3:05 AM To: gidlist at gid.cimne.upc.edu... [GiDlist] Graphic Error
Send by: miguel Those triangles will not appear in the next beta version. No, with NVIDIA will be almost ok. The problem with the latest drivers in NVIDIA (version >= 180.xx) is that only the axes are drawn. This issue is also corrected in the next beta version. Miguel Pasenau -- ---------------------------------------------------------------- Miguel Pasenau @: miguel at cimne.upc.edu Despacho C2, Edifico C1, Campus Norte UPC, c/ Gran Capitán s/n 08034 - Barcelona ( SPAIN) T: +34 3 93 401 74 03 F: +34 3 93 401 65 17 ---------------------------------------------------------------- IMPORTANT NOTICE All personal data contained in this mail will be processed confidentially and stored in a file property of CIMNE in order to manage corporate communications. You may exercise the right of access, rectification, deletion and objection by letter sent to CIMNE, Gran Capitán, Edificio C1 - Campus Norte UPC, 08034 Barcelona, Spain. _____ De: ... [GiDlist] Graphic Error
Send by: Tontavanich, Bituporn Thank you. I really appreciate your help. Have a great day. Bituporn Tontavanich From: gidlist-admin at gid.cimne.upc.edu [mailto:gidlist-admin at gid.cimne.upc.edu] On Behalf Of miguel Sent: Tuesday, March 03, 2009 11:30 AM To: gidlist at gid.cimne.upc.edu Subject: RE: [GiDlist] Graphic Error Those triangles will not appear in the next beta version. No, with NVIDIA will be almost ok. The problem with the latest drivers in NVIDIA (version >= 180.xx) is that only the axes are drawn. This issue is also corrected in the next beta version. Miguel Pasenau -- ---------------------------------------------------------------- Miguel Pasenau @: ... [GiDlist] Hi,there is a question about the unstructured mesh on thin plate
Send by: CHEN Ningning Dear gidlist，！
There is a question about the unstructured mesh.
When I model a thin plate surrounded by air in 3D(the long and width are 100 times than the thickness), I want to using unstructured tetrahedral elements to mesh the air.
The problem is I want to mesh 4,5 intervals on the thickness direction to assure the accuracy of the solution, so I need to using structured mesh on the thin plate.
But when I generate the unstructured mesh on the air, I failed.
I must guarantee the size of edge on the triangle element on the intersaction of air and plate is almost the same. Just like if I mesh 4,5 intervals on the thickness direction, I must mesh 400-500 intervals on the direction of the longth or width.
I want to only mesh 40,50 intervals on the direction of the longth or width, but I can't generate that mesh.
Are there any parameters which allow me to generate the mesh?
I have set the unstructure size transitions to any value I can, but it failed also.
My major is computational electromagnetics and there are many problems about very thick air gap in between the iron.
So it is the problem disturbed me most.
The attachment is my model. Thanks,
Best Regards，
CHEN Ningning
2009-02-19
-------------- next part --------------
A non-text attachment was scrubbed...
Name: long1width1Thin0.01.geo
Type: application/octet-stream
Size: 6513 bytes
Desc: not available
Url : ...
[GiDlist] Hi,there is a question about the unstructured mesh on thin plate
Send by: Enrique Escolano I have been able to generate a mesh without any problem using GiD 9.1.0b Rfast, Automatic correct sizes=Normal, transition=0.7 internal volume structured 200x200x4 cells (your applied number of divisions) General mesh size=0.1 I've obtained about 1.6 Milion of elements The geometry is very simple, if you are unable to mesh unstructured with the number of divisions that you want, then you can split your volumes into 27 structured volumes (it's easy to rebuid it using the copy window) I attach this kind of splitted model, you can generate the mesh with the current number of assigned divissions to obtain 9.36 Milion of hexahedra (or assign less division to avoid so big mesh) Enrique ----- Original Message ----- From: "CHEN Ningning" <... [GiDlist] Hi,there is a question about the unstructured mesh on thin plate
Send by: Tontavanich, Bituporn Hi Enrique, With over 9 million of hexahedra my computer (Dual core 1.87GHz, 3GB of Ram) processes very slow. What computer specification you are using for such model? Thank you. Bituporn Tontavanich -----Original Message----- From: gidlist-admin at gid.cimne.upc.edu [mailto:gidlist-admin at gid.cimne.upc.edu] On Behalf Of Enrique Escolano Sent: Thursday, February 19, 2009 9:26 AM To: gidlist at gid.cimne.upc.edu Subject: Re: [GiDlist] Hi,there is a question about the unstructured mesh on thin plate I have been able to generate a mesh without any problem using GiD 9.1.0b Rfast, Automatic correct sizes=Normal, transition=0.7 internal volume structured 200x200x4 cells (your applied number of divisions) General mesh size=0.1 I've obtained about 1.6 Milion of elements The geometry is very simple, if you are unable to mesh unstructured with the number of divisions that you want, then you can split your volumes into 27 structured volumes (it's easy to rebuid it using the copy window) I attach this kind of splitted model, you can generate the mesh with the current number of assigned divissions to obtain 9.36 Milion of hexahedra (or assign less division to avoid so big mesh) Enrique ----- Original Message ----- From: "CHEN Ningning" <... [GiDlist] Hi,there is a question about the unstructured mesh on thin plate
Send by: Enrique Escolano My computer works also slow with 9 milions of elements, but they were generated fast because the mesh is structured in this case. Now I'm working with dell Vostro 400( a dual core 2.33GHz, 4GB Ram) with Windows Vista x32 Check that your graphic card is using OpenGL hardware acceleration (only disable it if it exists some graphic problem) Enrique ----- Original Message ----- From: "Tontavanich, Bituporn" <bituporn.tontavanich at okstate.edu> To: <gidlist at gid.cimne.upc.edu> Sent: Thursday, February 19, 2009 4:53 PM Subject: RE: [GiDlist] Hi,there is a question about the unstructured mesh on thin plate >... [GiDlist] Hi,there is a question about the unstructured mesh on thin plate
Send by: CHEN Ningning Dear Enrique, Thanks very much for your nice help! I really want to know in the sample, when the air is meshed with unstructured elements, and the length and width are meshed with 40 interval while the thickness with 4 interval. But I can't generate it. If the lenth and width are meshed with 200 interval, the problem will be very large for the Finite element analysis. My problem is more complicated than the sample I attached. Here the attachment is my problem. And in this attachment model(team13all.geo),I enlarged the air gap from 0.0005 to 0.0032 compare to the real model(which is also in the attachment,PDF file,and team13last.geo). if I didn't enlarge it ,I can't generate the mesh. (Or I can generate the mesh all with unstructured elements, but air gap is only with one element.I want split the air gap for 3 or 4 interval.) My ideal was that after I generate the mesh, I would modify the coordinate of the node in the air gap to the real model. So after this idear, I enlarge the air gap and the thick of steel,too. ( team_13_OK).But the problem is after I modify the coordinate, there are some elements(6,7) are bad( their volume is little than 0). So the core problem is that I don't want to modify the real model, and I want to spit the air gap and the thickness of steel to 3or4 intervals. Because the air gap is very important for the FEM result. And I used this mesh, my result is 1/3 of the experiment result. I work on the model for 2 months, and there is rare progress. So I'm so appreciate for your help and suggestion. By the way, our group bought 6 license of GID8.0.2. how can we update to GID9? If GID9 will be help in my problem? Best regards, CHEN Ningning >... [GiDlist] Hi,there is a question about the unstructured mesh on thin plate
Send by: CHEN Ningning Dear Enrique, Some problem about the air may be not clearly described and I will introduce it. In the computational electromagnetics, we must consider the air surrouding the device. So the model are surrounded by a huge box of air. So the model become so complicated that I can't split all the domain to structured model. But I can model the device to structured model and generate structured mesh which can garrentee the 3 or 4 intervel in the air and the thickness of the steel. The air gap is described in the attachment. Best regards, CHEN Ningning >I have been able to generate a mesh without any problem using GiD 9.1.0b >... [GiDlist] linking with gidpost library using Intel compiler
Send by: Pablo Cuéllar Dear people of GiD / CIMNE, my research institute has recently bought a USB-licence for GiD 9, and now we would like to link the gidpost library to our FEM fortran codes. In your web-page for gidpost you indicate that for the Windows platform, one should compile the ”Makefile.vc” file provided with the program. We downloaded and installed successfully GiD9, but we cannot find any “Makefile.vc” file. If you could you please indicate us where to find it, or even better, send us the compiled library we would be very grateful. By the way, for building our project we are using the Intel Fortran Compiler and the Microsoft Visual Studio 2005. Until now we tried to build our project using older versions of the gidpost library. Those older versions, kindly provided by our research partners (Prof. Pastor and colleagues at the CEDEX / CETA research centre in Spain), were eventually linked successfully using the Intel compiler, but produce a run-time error as soon as the first GiD function is called (GID_OPENPOSTMESHFILE). We get the following error message: “Unhandled exception at 0x1000a04f in my_program.exe: 0xC0000005: Access violation reading location 0x00000015”. Do you have any hints or advice on how to link with the gidpost library using the Intel compiler? With our best regards, _____________________________________________________________________ Pablo Cuéllar Civil engineer <mailto:... [GiDlist] WG: linking with gidpost library using Intel compiler
Send by: Pablo Cuéllar Dear people of GiD,
two issues regarding my previous e-mail:
- I already found the “Makefile.vc” file provided with the program (it was
actually inside the USB stick, and not along the installation package). I
was able to successfully compile the gidpost library (version 1.70), but it
was impossible to link it using the Intel compiler.
- When using the gidpost library provided by Pastor et al. (see my previous
e-mail), I was also able to link it with the testpostfor.f source code, but
then I got the same run-time error upon execution of the program. When the
routine calls the first GiDpost function (CALL
GID_OPENPOSTRESULTFILE('testfortran.post.res',2)), the program crashes with
the following error: “Unhandled exception at 0x1000c08f in my_program.exe:
0xC0000005: Access violation reading location 0x00000014”.
If you could help me with this issue I would be very grateful :-)
Best regards,
Pablo Cuéllar
-----Ursprüngliche Nachricht-----
Von: Pablo Cuéllar [mailto:...
[GiDlist] WG: linking with gidpost library using Intel compiler
Send by: ronda at cimne.upc.es Hi, could you tell us the link errors you got whe using the gidpost you compiled? regards, Pablo Cuéllar wrote: > Dear people of GiD, > > > > two issues regarding my previous e-mail: > > > > - I already found the “Makefile.vc” file provided with the program (it > was actually _inside_ the USB stick, and not along the installation > package). I was able to successfully compile the gidpost library > (version 1.70), but it was impossible to link it using the Intel compiler. > > ... AW: [GiDlist] WG: linking with gidpost library using Intel compiler
Send by: Pablo Cuéllar When linking the gidpost.lib (version1.70) that I was able to compile out of the Makefile.vc, I get the following message: Linking... error.obj : error LNK2019: unresolved external symbol _GID_CLOSEPOSTRESULTFILE referenced in function _ERROR_mp_WRITE_ERROR_NOTENDED fem.obj : error LNK2001: unresolved external symbol _GID_CLOSEPOSTRESULTFILE output.obj : error LNK2019: unresolved external symbol _GID_OPENPOSTMESHFILE referenced in function _OUTPUT_mp_OUT_GID_DAT output.obj : error LNK2019: unresolved external symbol _GID_BEGINMESH referenced in function _OUTPUT_mp_OUT_GID_DAT output.obj : error LNK2019: unresolved external symbol _GID_BEGINCOORDINATES referenced in function _OUTPUT_mp_OUT_GID_DAT output.obj : error LNK2019: unresolved external symbol _GID_ENDCOORDINATES referenced in function _OUTPUT_mp_OUT_GID_DAT output.obj : error LNK2019: unresolved external symbol _GID_BEGINELEMENTS referenced in function _OUTPUT_mp_OUT_GID_DAT output.obj : error LNK2019: unresolved external symbol _GID_WRITEELEMENTMAT referenced in function _OUTPUT_mp_OUT_GID_DAT output.obj : error LNK2019: unresolved external symbol _GID_ENDELEMENTS referenced in function _OUTPUT_mp_OUT_GID_DAT output.obj : error LNK2019: unresolved external symbol _GID_ENDMESH referenced in function _OUTPUT_mp_OUT_GID_DAT output.obj : error LNK2019: unresolved external symbol _GID_CLOSEPOSTMESHFILE referenced in function _OUTPUT_mp_OUT_GID_DAT output.obj : error LNK2019: unresolved external symbol _GID_OPENPOSTRESULTFILE referenced in function _OUTPUT_mp_OUT_GID_DAT output.obj : error LNK2019: unresolved external symbol _GID_BEGINGAUSSPOINT referenced in function _OUTPUT_mp_OUT_GID_DAT output.obj : error LNK2019: unresolved external symbol _GID_WRITEGAUSSPOINT3D referenced in function _OUTPUT_mp_OUT_GID_DAT output.obj : error LNK2019: unresolved external symbol _GID_ENDGAUSSPOINT referenced in function _OUTPUT_mp_OUT_GID_DAT output.obj : error LNK2019: unresolved external symbol _GID_WRITEGAUSSPOINT2D referenced in function _OUTPUT_mp_OUT_GID_DAT output.obj : error LNK2019: unresolved external symbol _GID_WRITECOORDINATES referenced in function _OUTPUT_mp_OUT_GID_DAT output.obj : error LNK2019: unresolved external symbol _GID_ENDRESULT referenced in function _OUTPUT_mp_OUT_GID_RES output.obj : error LNK2019: unresolved external symbol _GID_BEGINSCALARRESULT referenced in function _OUTPUT_mp_OUT_GID_RES output.obj : error LNK2019: unresolved external symbol _GID_WRITESCALAR referenced in function _OUTPUT_mp_OUT_GID_RES output.obj : error LNK2019: unresolved external symbol _GID_BEGIN3DMATRESULT referenced in function _OUTPUT_mp_OUT_GID_RES output.obj : error LNK2019: unresolved external symbol _GID_WRITE3DMATRIX referenced in function _OUTPUT_mp_OUT_GID_RES output.obj : error LNK2019: unresolved external symbol _GID_BEGINPDMMATRESULT referenced in function _OUTPUT_mp_OUT_GID_RES output.obj : error LNK2019: unresolved external symbol _GID_WRITEPLAINDEFMATRIX referenced in function _OUTPUT_mp_OUT_GID_RES output.obj : error LNK2019: unresolved external symbol _GID_BEGINVECTORRESULT referenced in function _OUTPUT_mp_OUT_GID_RES output.obj : error LNK2019: unresolved external symbol _GID_WRITEVECTOR referenced in function _OUTPUT_mp_OUT_GID_RES Release/my_program.exe : fatal error LNK1120: 25 unresolved externals Thanks again for your help! :-) Best regards, Pablo -----Ursprüngliche Nachricht----- Von: ... [GiDlist] Hi,there is a question about the unstructured mesh on thin plate
Send by: CHEN Ningning Dear Enrique, Thanks very much for your nice help! I really want to know in the sample, when the air is meshed with unstructured elements, and the length and width are meshed with 40 interval while the thickness with 4 interval. But I can't generate it. If the lenth and width are meshed with 200 interval, the problem will be very large for the Finite element analysis. My problem is more complicated than the sample I attached. Here the attachment is my problem. And in this attachment model(team13all.geo),I enlarged the air gap from 0.0005 to 0.0032 compare to the real model(which is also in the attachment,PDF file,and team13last.geo). if I didn't enlarge it ,I can't generate the mesh. (Or I can generate the mesh all with unstructured elements, but air gap is only with one element.I want split the air gap for 3 or 4 interval.) My ideal was that after I generate the mesh, I would modify the coordinate of the node in the air gap to the real model. So after this idear, I enlarge the air gap and the thick of steel,too. ( team_13_OK).But the problem is after I modify the coordinate, there are some elements(6,7) are bad( their volume is little than 0). So the core problem is that I don't want to modify the real model, and I want to spit the air gap and the thickness of steel to 3or4 intervals. Because the air gap is very important for the FEM result. And I used this mesh, my result is 1/3 of the experiment result. I work on the model for 2 months, and there is rare progress. So I'm so appreciate for your help and suggestion. By the way, our group bought 6 license of GID8.0.2. how can we update to GID9? If GID9 will be help in my problem? Best regards, CHEN Ningning >... [GiDlist] Hi,there is a question about the unstructured mesh on thin plate
Send by: Enrique Escolano Dear Chen, I've modified your file 'Team13_Last'creating two additional boxes that connect the two parts filling the 'thin air space' This auxiliary boxes are in the layer aux1 and aux2 and are interesting to aid to mesh. I set as structured only the thinner one, with number of divisions 3x7x11. I was only interested to have 3 divisions in the small gap, the other numbers are to have reasonable tetrahedra sizes Note: I worked with only a quarter of the piece to do less operations, and at the end I created the rest by copy with 180 degrees of rotation and with copy with simmetry. I attach my model zipped including the mesh (about 100.000 elements and 17.000 nodes). It was meshed with GiD 9.x. If you are unable to mesh it with GiD 8.x can download this new version and use it with a trial one month password obtained from our web. There are also special prices to upgrade from GiD 8.x to 9.x (60% discount), you can see all this information in the web www.gidhome.com Regards Enrique ----- Original Message ----- From: "CHEN Ningning" <... [GiDlist] Hi,there is a question about the unstructured mesh on thin plate
Send by: CHEN Ningning Dear Enrique Escolano！ I mean the structured 40*40*4 will not be Ok. Can you try this? The mesh in air must be unstructured. >I have been able to generate a mesh without any problem using GiD 9.1.0b >Rfast, Automatic correct sizes=Normal, transition=0.7 >internal volume structured 200x200x4 cells (your applied number of >divisions) >General mesh size=0.1 > >I've obtained about 1.6 Milion of elements > >The geometry is very simple, if you are unable to mesh unstructured with the >number of divisions that you want, then you can split your volumes into 27 ... [GiDlist] Hi,there is a question about the unstructured mesh on thin plate
Send by: CHEN Ningning Dear Enrique Escolano, I mean the structured 40*40*4 will not be Ok. Can you try this? The mesh in air around the cube must be unstructured. >I have been able to generate a mesh without any problem using GiD 9.1.0b >Rfast, Automatic correct sizes=Normal, transition=0.7 >internal volume structured 200x200x4 cells (your applied number of >divisions) >General mesh size=0.1 > >I've obtained about 1.6 Milion of elements > >The geometry is very simple, if you are unable to mesh unstructured with the >number of divisions that you want, then you can split your volumes into 27 ... [GiDlist] Hi,there is a question about the unstructured mesh on thin plate
Send by: CHEN Ningning Dear Enrique Escolano,
Thanks for you help.
I used GID 9.0.x to generate the mesh and it is OK.
I'm wonder that why the two additional boxes are so important to generate the mesh.
And if we meet the problem "38 cound't mesh at this location", how can we deal with it?
And the other problem is after i hit the generate, there is a parameter I can modify, this parameter is
also important to the problem. How can I choose this parameter?
I will do the structured mesh on the other steel. Thanks again for your nice help!
Best Regards，
CHEN Ningning
2009-03-03
>...
[GiDlist] Hi,there is a question about the unstructured mesh on thin plate
Send by: Enrique Escolano Maybe it had been possible to generate a mesh, able for your calculation, without create this additional boxes, by assigning appropiated sizes to geometrical entities, but also the auxiliary box allow to create a structured mesh in the thin air gap, the most difficult part of your model. Whit this structured part do you have the exact number of layers of nodes, and the elements can be stretched in the other directions. Also splitting your geometry in parts allow to assign better mesh sizes to the space. When the volume mesher can't generate the mesh, usually is because its boundary triangles are problematic (very bad shaped, or too different sizes between neigbors, etc.). What I do in this cases is force to generate also the triangle mesh and see it near the location pointed by the mesh error, and then change some size or the geometry if necessary. A good advice is always 'divide and conquer', if some part can't be meshed, you can split in two parts and try again, until the problem is isolated and avoided. Regards Enrique ----- Original Message ----- From: "CHEN Ningning" <... [GiDlist] Hi,there is a question about the unstructured mesh on thin plate
Send by: Enrique Escolano About your sentence: "And the other problem is after i hit the generate, there is a parameter I can modify, this parameter is also important to the problem. How can I choose this parameter?" I didn't understood well this question, maybe my answer is not appropiated, but in any case I think that is interesting to be know: When the model is saved, the meshing parameters are also saved with the model, you can see this values in the Utilities->Status window, and there is a button "Set Mesh Options" to set the current variables with the values used in the saved model (to try to obtain again the same mesh) Enrique ----- Original Message ----- From: "CHEN Ningning" <... [GiDlist] Hi,there is a question about the unstructured mesh on thin plate
Send by: CHEN Ningning Dear Enrique， The problem arise again just as the first problem about an thin plate in the air. I can't use structured mesh on the steel and unstructured mesh on the air too. My problem now can simplified to the plate in the air. How can I mesh alone the thickness to 3,4 intervals and keep the lenth and width 30-40 intervals. I know that must result in the bad triangle element in the air. In my example, I must split the steel into 3-4 intervals, and in order to not result in large number of mesh, the interval of length and width should keep as little as possible. Best Regards， CHEN Ningning 2009-03-03 >... [GiDlist] Hi,there is a question about the unstructured mesh on thin plate
Send by: CHEN Ningning Dear Enrique， As I'm working on the problem about an thin plate in the air, the first time I fortunately mesh the plate with 20*20*4 mesh. After I goto another problem, I remesh on the plate, I find it is not OK to mesh it with the same setting agai. It is amazing. I can't find why. Maybe the 3-D unstructured mesh are so important and ramdon to structure? The geometry is as attached. Best Regards， CHEN Ningning 2009-03-03 >... [GiDlist] Force line to surface mesh
Send by: Nacho Hello, its posible to force a line to a surface mesh like the option force points to surface mesh? Thanks -------------- next part -------------- An HTML attachment was scrubbed... URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20090305/71bd998b/attachment.htm [GiDlist] Force line to surface mesh
Send by: Abel Coll Dear Nacho,
No, this option is not available in GiD by the moment.
The only thing you can do is to split de surface in a way that the line own
topologically to the surface.
Regards,
ABEL
_________________________________
Abel Coll Sans - Civil Engineer
CIMNE - International Center for Numerical Methods in Engineering
Ofice c-2, C1 building - Campus Nord UPC
Gran Capità s/n, 08034 Barcelona
T: 34 - 93 401 74 03 Fax: 34 - 93 40 65 17
_____
AVISO IMPORTANTE
Los datos de carácter personal contenidos en el mensaje, se registrarán en
un fichero para facilitar la gestión de las comunicaciones de CIMNE. Se
pueden ejercitar los derechos de acceso, rectificación, cancelación y
oposición por escrito, dirigiéndose a nuestras oficinas de CIMNE, Gran
Capitán s/n, Edificio C1 - Campus Norte UPC, 08034 Barcelona, España.
AVÍS IMPORTANT
Les dades de caràcter personal contingudes en aquest missatge es registraran
en un fitxer per facilitar la gestió de les comunicacions del CIMNE. Es
poden exercir els drets d'accés, rectificació, cancel·lació i oposició, per
escrit a les nostres oficines del CIMNE, Gran Capità s/n, Edifici C1, Campus
Nord UPC, 08034 Barcelona, Espanya.
IMPORTANT NOTICE
All personal data contained in this mail will be processed confidentially
and stored in a file property of CIMNE in order to manage corporate
communications. You may exercise the right of access, rectification,
deletion and objection by letter sent to CIMNE, Gran Capitán, Edificio C1 -
Campus Norte UPC, 08034 Barcelona, Spain.
_____
_____
De: ...
[GiDlist] Main window
Send by: Tontavanich, Bituporn Hi GiD,
When opening windows of, for example, some programs overlapping with GiD window, GiD main window shows pictures of other windows. As a result I need to click on "Zoom frame" to re-attain my model on GiD main window. I need to do this every time after activating GiD program.
Below are details of GiD on my computer and example of the problem.
Thank you.
Bituporn Tontavanich
========================================================================================================================
GiD internal version: 9.0.2
Operating system: 'intel' 'windows' 'Windows NT' '5.1'
Tcl8.5.1 Tk8.5(8.5.1)
Asked for an acceleratedrenderer,
Hardware accelerated (ICD) implementation, PixelFormat 5,
DoubleBuffer: yes,
RGBA,Draw to Window,OpenGL support,
Using 32 Color bits: 8 red, 8 green, 8 blue and 0 alpha,
Using 0 Accumulation bits: 0 red, 0 green, 0 blue and 0 alpha,
Using 32 Depth bits and 0 StencilBits
0 Auxiliary buffers
OpenGl:
VENDOR: {ATI Technologies Inc.}
RENDERER: {256MB ATI Radeon X1300PRO x86/SSE2}
VERSION: {2.0.5885 WinXP Release}
DISPLAY INFORMATION: {bits red 8, green 8, blue 8, alpha 8, depth 24, stencil 8, stereo no.}
EXTENSIONS: {GL_ARB_multitexture GL_EXT_texture_env_add GL_EXT_compiled_vertex_array
GL_S3_s3tc GL_ARB_depth_texture GL_ARB_fragment_program
GL_ARB_fragment_program_shadow GL_ARB_fragment_shader GL_ARB_multisample
GL_ARB_occlusion_query GL_ARB_point_parameters GL_ARB_point_sprite
GL_ARB_shader_objects GL_ARB_shading_language_100 GL_ARB_shadow
GL_ARB_shadow_ambient GL_ARB_texture_border_clamp GL_ARB_texture_compression
GL_ARB_texture_cube_map GL_ARB_texture_env_add GL_ARB_texture_env_combine
GL_ARB_texture_env_crossbar GL_ARB_texture_env_dot3 GL_ARB_texture_mirrored_repeat
GL_ARB_transpose_matrix GL_ARB_vertex_blend GL_ARB_vertex_buffer_object
GL_ARB_vertex_program GL_ARB_vertex_shader GL_ARB_window_pos
GL_ARB_draw_buffers GL_ATI_draw_buffers GL_ATI_element_array
GL_ATI_envmap_bumpmap GL_ATI_fragment_shader GL_ATI_map_object_buffer
GL_ATI_separate_stencil GL_ATI_shader_texture_lod GL_ATI_texture_compression_3dc
GL_ATI_texture_env_combine3 GL_ATI_texture_float GL_ATI_texture_mirror_once
GL_ATI_vertex_array_object GL_ATI_vertex_attrib_array_object GL_ATI_vertex_streams
GL_ATIX_texture_env_combine3 GL_ATIX_texture_env_route GL_ATIX_vertex_shader_output_point_size
GL_EXT_abgr GL_EXT_bgra GL_EXT_blend_color
GL_EXT_blend_func_separate GL_EXT_blend_minmax GL_EXT_blend_subtract
GL_EXT_clip_volume_hint GL_EXT_draw_range_elements GL_EXT_fog_coord
GL_EXT_framebuffer_object GL_EXT_multi_draw_arrays GL_EXT_packed_pixels
GL_EXT_point_parameters GL_EXT_rescale_normal GL_EXT_secondary_color
GL_EXT_separate_specular_color GL_EXT_shadow_funcs GL_EXT_stencil_wrap
GL_EXT_texgen_reflection GL_EXT_texture3D GL_EXT_texture_compression_s3tc
GL_EXT_texture_cube_map GL_EXT_texture_edge_clamp GL_EXT_texture_env_combine
GL_EXT_texture_env_dot3 GL_EXT_texture_filter_anisotropic GL_EXT_texture_lod_bias
GL_EXT_texture_mirror_clamp GL_EXT_texture_object GL_EXT_texture_rectangle
GL_EXT_vertex_array GL_EXT_vertex_shader GL_HP_occlusion_test
GL_NV_blend_square GL_NV_occlusion_query GL_NV_texgen_reflection
GL_SGI_color_matrix GL_SGIS_generate_mipmap GL_SGIS_multitexture
GL_SGIS_texture_border_clamp GL_SGIS_texture_edge_clamp GL_SGIS_texture_lod
GL_SUN_multi_draw_arrays GL_WIN_swap_hint WGL_EXT_extensions_string
WGL_EXT_swap_control }
GLX::
SERVER:
OVERLAY: 0
OVERLAY IN MENU: 0
====================================================================================================================================
[cid:...
[GiDlist] Main window
Send by: Enrique Escolano This is a problem related to your graphic card/driver and the OpenGL hardware acceleration If you disable this acceleration the problem will be avoided Go to Windows Screen properties->Advanced options->Solve problems and decrease the acceleration level (use the bigger level that not produce any graphical problem) Enrique ----- Original Message ----- From: Tontavanich, Bituporn To: gidlist at gid.cimne.upc.edu Sent: Friday, March 06, 2009 7:29 PM Subject: [GiDlist] Main window Hi GiD, When opening windows of, for example, some programs overlapping with GiD window, GiD main window shows pictures of other windows. As a result I need to click on "Zoom frame" to re-attain my model on GiD main window. I need to do this every time after activating GiD program. Below are details of GiD on my computer and example of the problem. Thank you. Bituporn Tontavanich ======================================================================================================================== GiD internal version: 9.0.2 Operating system: 'intel' 'windows' 'Windows NT' '5.1' Tcl8.5.1 Tk8.5(8.5.1) Asked for an acceleratedrenderer, Hardware accelerated (ICD) implementation, PixelFormat 5, DoubleBuffer: yes, RGBA,Draw to Window,OpenGL support, Using 32 Color bits: 8 red, 8 green, 8 blue and 0 alpha, Using 0 Accumulation bits: 0 red, 0 green, 0 blue and 0 alpha, Using 32 Depth bits and 0 StencilBits 0 Auxiliary buffers OpenGl: VENDOR: {ATI Technologies Inc.} RENDERER: {256MB ATI Radeon X1300PRO x86/SSE2} VERSION: {2.0.5885 WinXP Release} DISPLAY INFORMATION: {bits red 8, green 8, blue 8, alpha 8, depth 24, stencil 8, stereo no.} EXTENSIONS: {GL_ARB_multitexture GL_EXT_texture_env_add GL_EXT_compiled_vertex_array GL_S3_s3tc GL_ARB_depth_texture GL_ARB_fragment_program GL_ARB_fragment_program_shadow GL_ARB_fragment_shader GL_ARB_multisample GL_ARB_occlusion_query GL_ARB_point_parameters GL_ARB_point_sprite GL_ARB_shader_objects GL_ARB_shading_language_100 GL_ARB_shadow GL_ARB_shadow_ambient GL_ARB_texture_border_clamp GL_ARB_texture_compression GL_ARB_texture_cube_map GL_ARB_texture_env_add GL_ARB_texture_env_combine GL_ARB_texture_env_crossbar GL_ARB_texture_env_dot3 GL_ARB_texture_mirrored_repeat GL_ARB_transpose_matrix GL_ARB_vertex_blend GL_ARB_vertex_buffer_object GL_ARB_vertex_program GL_ARB_vertex_shader GL_ARB_window_pos GL_ARB_draw_buffers GL_ATI_draw_buffers GL_ATI_element_array GL_ATI_envmap_bumpmap GL_ATI_fragment_shader GL_ATI_map_object_buffer GL_ATI_separate_stencil GL_ATI_shader_texture_lod GL_ATI_texture_compression_3dc GL_ATI_texture_env_combine3 GL_ATI_texture_float GL_ATI_texture_mirror_once GL_ATI_vertex_array_object GL_ATI_vertex_attrib_array_object GL_ATI_vertex_streams GL_ATIX_texture_env_combine3 GL_ATIX_texture_env_route GL_ATIX_vertex_shader_output_point_size GL_EXT_abgr GL_EXT_bgra GL_EXT_blend_color GL_EXT_blend_func_separate GL_EXT_blend_minmax GL_EXT_blend_subtract GL_EXT_clip_volume_hint GL_EXT_draw_range_elements GL_EXT_fog_coord GL_EXT_framebuffer_object GL_EXT_multi_draw_arrays GL_EXT_packed_pixels GL_EXT_point_parameters GL_EXT_rescale_normal GL_EXT_secondary_color GL_EXT_separate_specular_color GL_EXT_shadow_funcs GL_EXT_stencil_wrap GL_EXT_texgen_reflection GL_EXT_texture3D GL_EXT_texture_compression_s3tc GL_EXT_texture_cube_map GL_EXT_texture_edge_clamp GL_EXT_texture_env_combine GL_EXT_texture_env_dot3 GL_EXT_texture_filter_anisotropic GL_EXT_texture_lod_bias GL_EXT_texture_mirror_clamp GL_EXT_texture_object GL_EXT_texture_rectangle GL_EXT_vertex_array GL_EXT_vertex_shader GL_HP_occlusion_test GL_NV_blend_square GL_NV_occlusion_query GL_NV_texgen_reflection GL_SGI_color_matrix GL_SGIS_generate_mipmap GL_SGIS_multitexture GL_SGIS_texture_border_clamp GL_SGIS_texture_edge_clamp GL_SGIS_texture_lod GL_SUN_multi_draw_arrays GL_WIN_swap_hint WGL_EXT_extensions_string WGL_EXT_swap_control } GLX:: SERVER: OVERLAY: 0 OVERLAY IN MENU: 0 ==================================================================================================================================== -------------- next part -------------- An HTML attachment was scrubbed... URL: ... [GiDlist] Main window
Send by: Tontavanich, Bituporn No, the problem still exists even I turned off the hardware acceleration. I updated my display driver but it doesn't help either. Thank you. Bituporn Tontavanich From: gidlist-admin at gid.cimne.upc.edu [mailto:gidlist-admin at gid.cimne.upc.edu] On Behalf Of Enrique Escolano Sent: Monday, March 09, 2009 6:01 AM To: gidlist at gid.cimne.upc.edu Subject: Re: [GiDlist] Main window This is a problem related to your graphic card/driver and the OpenGL hardware acceleration If you disable this acceleration the problem will be avoided Go to Windows Screen properties->Advanced options->Solve problems and decrease the acceleration level (use the bigger level that not produce any graphical problem) Enrique ----- Original Message ----- From: Tontavanich, Bituporn<mailto:... [GiDlist] Main window
Send by: Enrique Escolano ¿how have you turned off the acceleration? ¿from the related Windows screen properties or starting "GiD safe mode" and selecting the software option? try both methods Your details of GiD on your computer (Help->About- more) were showing that do you have the hardware acceleration activated, using the ATI drivers!! You can also try our 9.1.1b beta version, we did a lot of changes on our "togl widget", maybe they will solve your case. http://www.gidhome.com/download/do07.html ----- Original Message ----- From: Tontavanich, Bituporn To: gidlist at gid.cimne.upc.edu... [GiDlist] Main window
Send by: Tontavanich, Bituporn I turned it off by going to Display Properties>Settings>Advanced>Troubleshoot>Hardware Acceleration. How do I start GiD in safe mode, could you specify more details? I did try 9.1.1b as well but it is worse. That is I cannot even resume to my model by clicking on "Zoom Frame" as I did to 9.0.2. Thank you. Bituporn Tontavanich From: gidlist-admin at gid.cimne.upc.edu [mailto:gidlist-admin at gid.cimne.upc.edu] On Behalf Of Enrique Escolano Sent: Monday, March 09, 2009 2:36 PM To: ... [GiDlist] Main window
Send by: miguel Hi, to start gid in safe mode you can go to Start --> Programs --> GiD 9.0.2 --> GiD Safe mode. Then a window like this will pop up: Just click on ‘Activate Software OpenGL. Best regards, Miguel Pasenau -- ---------------------------------------------------------------- Miguel Pasenau @: miguel at cimne.upc.edu Despacho C2, Edifico C1, Campus Norte UPC, c/ Gran Capitán s/n 08034 - Barcelona ( SPAIN) T: +34 3 93 401 74 03 F: +34 3 93 401 65 17 ---------------------------------------------------------------- IMPORTANT NOTICE All personal data contained in this mail will be processed confidentially and stored in a file property of CIMNE in order to manage corporate communications. You may exercise the right of access, rectification, deletion and objection by letter sent to CIMNE, Gran Capitán, Edificio C1 - Campus Norte UPC, 08034 Barcelona, Spain. _____ De: ... [GiDlist] Main window
Send by: Tontavanich, Bituporn I tried every choice you suggested (i.e. GiD safe mode and GiD 9.1.1 with acceleration turned off) but it all failed. Below is GiD information after I turned off the acceleration.
Thank you.
Bituporn Tontavanich
GiD internal version: 9.0.2
Operating system: 'intel' 'windows' 'Windows NT' '5.1'
Tcl8.5.1 Tk8.5(8.5.1)
Asked for a genericrenderer,
Hardware accelerated (ICD) implementation, PixelFormat 3,
DoubleBuffer: yes,
RGBA,Draw to Window,OpenGL support,
Using 32 Color bits: 8 red, 8 green, 8 blue and 0 alpha,
Using 0 Accumulation bits: 0 red, 0 green, 0 blue and 0 alpha,
Using 32 Depth bits and 0 StencilBits
0 Auxiliary buffers
OpenGl:
VENDOR: {Microsoft Corporation}
RENDERER: {GDI Generic}
VERSION: 1.1.0
DISPLAY INFORMATION: {bits red 8, green 8, blue 8, alpha 0, depth 32, stencil 8, stereo no.}
EXTENSIONS: {GL_WIN_swap_hint GL_EXT_bgra GL_EXT_paletted_texture}
GLX::
SERVER:
OVERLAY: 0
OVERLAY IN MENU: 0
From: ...
[GiDlist] How to generate a grid without adding new nodes?
Send by: Jonas Cordazzo Some time ago I sent a message asking how to generate a grid composed by triangles employing only the original nodes belonging to the original surface, no matter if the shape of resulting triangles be not so good. I was dealing with a problem that was not possible to create additional (new) nodes to the domain. At that moment Abel C. Sans gave me his suggestions as you can see below. However, GiD is always creating new nodes even following his suggestion. My test case is a simple quadrilateral, defined as follows: (-73.9225 ; 40.7604 ; 0) (-73.9217 ; 40.7601 ; 0) (-73.9246 ; 40.7581 ; 0) (-73.9237 ; 40.7577 ; 0) that is supposed to originate only 2 triangles. However, it is not happening. Perhaps should I do anything else? Anyway, thank Abel for your initial suggestions. Kind regards, Jonas From: ... [GiDlist] How to generate a grid without adding new nodes?
Send by: Abel Coll Dear Jonas, Depending on the shape of the surface to be meshed, some node is added or not, when a unstructured mesher is used. In your case, you have a four-sided surface, so you can generate a structured mesh on it. If you set a structured the surface, you assign "Triangle" as its element type, and you uncheck the "Symmetrical structured->triangles" option in the Meshing Preferences window, you will obtain a mesh with two triangles, and only using the corner points of your surface as nodes. Regards, ABEL _________________________________ Abel Coll Sans - Civil Engineer CIMNE - International Center for Numerical Methods in Engineering Ofice c-2, C1 building - Campus Nord UPC Gran Capità s/n, 08034 Barcelona T: 34 - 93 401 74 03 Fax: 34 - 93 40 65 17 _____ AVISO IMPORTANTE Los datos de carácter personal contenidos en el mensaje, se registrarán en un fichero para facilitar la gestión de las comunicaciones de CIMNE. Se pueden ejercitar los derechos de acceso, rectificación, cancelación y oposición por escrito, dirigiéndose a nuestras oficinas de CIMNE, Gran Capitán s/n, Edificio C1 - Campus Norte UPC, 08034 Barcelona, España. AVÍS IMPORTANT Les dades de caràcter personal contingudes en aquest missatge es registraran en un fitxer per facilitar la gestió de les comunicacions del CIMNE. Es poden exercir els drets d'accés, rectificació, cancel·lació i oposició, per escrit a les nostres oficines del CIMNE, Gran Capità s/n, Edifici C1, Campus Nord UPC, 08034 Barcelona, Espanya. IMPORTANT NOTICE All personal data contained in this mail will be processed confidentially and stored in a file property of CIMNE in order to manage corporate communications. You may exercise the right of access, rectification, deletion and objection by letter sent to CIMNE, Gran Capitán, Edificio C1 - Campus Norte UPC, 08034 Barcelona, Spain. _____ _____ De: ... [GiDlist] How to generate a grid without adding new nodes?
Send by: Jonas Cordazzo Some time ago I sent a message asking how to generate a grid composed by triangles employing only the original nodes belonging to the original surface, no matter if the shape of resulting triangles be not so good. I was dealing with a problem that was not possible to create additional (new) nodes to the domain. Abel C. Sans gently gave me his suggestions, in two emails, as you can see below. However, GiD is always creating new nodes even following his suggestion. My test case is a simple quadrilateral, defined as follows: -73.9225,40.7604,0 -73.9217,40.7601,0 -73.9246,40.7581,0 -73.9237,40.7577,0 that is supposed to originate only 2 triangles. However, it is not happening. Really I don't believe that it is not possible to perform this simple task in GiD, perhaps I am still missing something. Perhaps should I do anything else? Anyway, thank Abel for your initial suggestions. Kind regards, Jonas Ps.: Depending on 'Unstructured size transitions' on Meshing Preferences window, a grid with either 5 or 6 nodes is produced (I was expecting only 4!). From: ... [GiDlist] How to generate a grid without adding new nodes?
Send by: Enrique Escolano In an specific case like your four sided surface, you can do an structured mesh (Mesh->Structured->Surfaces) with number of divisions=1 and also must specify element type=triangle (else you will obtain quadrilateral) (Mesh->Element type->Triangle) Depending of a variable the structured quadrilaterals are splitted in two or four triangles (and an extra node). Do you want the first option, then unset the "Symmetrical structured" triangles checkbox (Utilties->Preferences- Meshing - Structured mesh - Symmetrical structured) For three sided surfaces, if you set the number of divisions=1 for its lines, then you will obtain a single triangle as mesh For more complex surfaces maybe you can't force to avoid the generation of some interior node. Regards Enrique Escolano ----- Original Message ----- From: Jonas Cordazzo To: ... [GiDlist] About the generate the Volume by contour
Send by: CHEN Ningning Dear gidlist， I meet a question about generate the volume by contour. We will meet the symmetric problem and we have to deal half of the domain. but when I deal with the half domain, I find can't generate the surrounding air volume. It is maybe the complicate about the bottom surface. My geometry is shown in attachment. Best Regards， CHEN Ningning 2009-03-09 -------------- next part -------------- A non-text attachment was scrubbed... Name: team13all.geo Type: application/octet-stream Size: 73509 bytes Desc: not available Url : ... [GiDlist] About the generate the Volume by contour
Send by: Adrià Melendo I had no problem creating the volume. It was quite annoying, but using (Contextual menu->Selection Window) to filter by higher entity while selecting process, it was possible. My process was: select all surface with higher entity 1, unselect bottom surface and add to selection the 6 outside surface (the ones with higher entity 0) The contour surface of the volume that you want to create are: 1 61 4 25 3 63 59 16 5 20 17 2 10 15 13 11 9 62 64 12 14 26 24 23 22 21 105 109 112 114 106 113 111 108 44 47 46 48 45 41 42 50 53 52 54 51 8 60 7 6 84 101 95 99 87 103 94 90 150 152 136 139 134 127 128 155 157 145 149 144 79 85 89 81 83 86 96 126 135 137 121 119 122 129 146 147 124 80 82 118 120 123 125 ________________________________ AVISO IMPORTANTE Los datos de carácter personal facilitados están registrados en un fichero con la finalidad de facilitar la gestión de las comunicaciones de CIMNE. Puede ejercitar los derechos de acceso, rectificación, cancelación y oposición mediante petición dirigiéndose a nuestras oficinas en Ed. C1 Campus Norte UPC. Gran Capitán s/n Barcelona AVIS IMPORTANT Les dades de caràcter personal facilitades seran registrades en un fitxer amb la finalitat de facilitar les gestions de les comunicacions de CIMNE. Pot exercir els drets d'accés, rectificació i cancel・lació, per escrit a les nostres oficines en Ed. C1 Campus Nord UPC. Gran Capità s/n Barcelona. IMPORTANT NOTICE All personal data contained on this mail will be processed confidentially and registered in a file property of CIMNE., in order to manage corporate communications. You may exercise the rights of access, rectification, erasure and object by letter sent to Ed. C1 Campus Norte UPC. Gran Capitán s/n Barcelona. -----Mensaje original----- De: ... [GiDlist] About the generate the Volume by contour
Send by: CHEN Ningning I have fixed this problem.
The reason is that I choose more surfaces on the bottom to generate the volume.
Thanks,
Best Regards，
CHEN Ningning
2009-03-09
>Dear gidlist，
>
>I meet a question about generate the volume by contour.
>We will meet the symmetric problem and we have to deal half of the domain.
>but when I deal with the half domain, I find can't generate the surrounding air volume.
>It is maybe the complicate about the bottom surface.
...
[GiDlist] About the generate the Volume by contour
Send by: CHEN Ningning Dear Adrià Melendo, Yes, I forgot to unselect the botton surface. But it's so difficulty to generate the mesh. I want to make structure mesh all the six-faceds volume. I't seems so hard. The problem is GiD does not allow the element be so huge longth:with, just like 1:5, on the unstructure mesh area. The error message is that "cound't mesh at this location". Just see my attachment. This is the biggest problem I meet. Best Regards， CHEN Ningning 2009-03-09 >... [GiDlist] Graphs don't show lines
Send by: Smith, Mark Windows XP professional sp3, GiD 9.0.2 Hi GiD team, I can't get lines to be drawn on graphs, the display does not change no matter what I set current style to? See attached Regards mark Please be advised that this email may contain confidential information. If you are not the intended recipient, please do not read, copy or re-transmit this email. If you have received this email in error, please notify us by email by replying to the sender and by telephone (call us collect at +1 202-828-0850) and delete this message and any attachments. Thank you in advance for your cooperation and assistance. In addition, Danaher and its subsidiaries disclaim that the content of this email constitutes an offer to enter into, or the acceptance of, any contract or agreement or any amendment thereto; provided that the foregoing disclaimer does not invalidate the binding effect of any digital or other electronic reproduction of a manual signature that is included in any attachment to this email. -------------- next part -------------- A non-text attachment was scrubbed... Name: MyPicture1.gif Type: image/gif Size: 13845 bytes Desc: MyPicture1.gif Url : ... [GiDlist] Graphs don't show lines
Send by: miguel Hello, The 'current syle' you selected is for the new graphs. To change the style of an already created graph, you need to go to the 'Graph management' panel: In this panel, just select the graph, choose the style you want for the graph, and press ‘apply’. Miguel Pasenau -- ---------------------------------------------------------------- Miguel Pasenau @: miguel at cimne.upc.edu Despacho C2, Edifico C1, Campus Norte UPC, c/ Gran Capitán s/n 08034 - Barcelona ( SPAIN) T: +34 3 93 401 74 03 F: +34 3 93 401 65 17 ---------------------------------------------------------------- IMPORTANT NOTICE All personal data contained in this mail will be processed confidentially and stored in a file property of CIMNE in order to manage corporate communications. You may exercise the right of access, rectification, deletion and objection by letter sent to CIMNE, Gran Capitán, Edificio C1 - Campus Norte UPC, 08034 Barcelona, Spain. -----Mensaje original----- De: ... [GiDlist] Graphs don't show lines
Send by: Smith, Mark Hi Miguel Unfortunately your suggestion makes no difference ;-( ________________________________ From: gidlist-admin at gid.cimne.upc.edu [mailto:gidlist-admin at gid.cimne.upc.edu] On Behalf Of miguel Sent: 09 March 2009 14:46 To: gidlist at gid.cimne.upc.edu Subject: RE: [GiDlist] Graphs don't show lines Hello, The 'current syle' you selected is for the new graphs. To change the style of an already created graph, you need to go to the 'Graph management' panel: In this panel, just select the graph, choose the style you want for the graph, and press 'apply'. Miguel Pasenau -- ---------------------------------------------------------------- Miguel Pasenau @: ... [GiDlist] Graphs don't show lines
Send by: miguel Can you send us a little example where this happens? You can also try the latest 9.1.1b, whch can be downloaded at ftp://www.gidhome.com/pub/gid_adds/Windows/win-x32/ Miguel Pasenau -- ---------------------------------------------------------------- Miguel Pasenau @: miguel at cimne.upc.edu Despacho C2, Edifico C1, Campus Norte UPC, c/ Gran Capitán s/n 08034 - Barcelona ( SPAIN) T: +34 3 93 401 74 03 F: +34 3 93 401 65 17 ---------------------------------------------------------------- IMPORTANT NOTICE All personal data contained in this mail will be processed confidentially and stored in a file property of CIMNE in order to manage corporate communications. You may exercise the right of access, rectification, deletion and objection by letter sent to CIMNE, Gran Capitán, Edificio C1 - Campus Norte UPC, 08034 Barcelona, Spain. _____ De: ... [GiDlist] Graphs don't show lines
Send by: Enrique Escolano You can also try to delete your 'gid.ini' user file, maybe it is storing some unexpected value for some graph related variable. (when deleting this file it is is automatically rebuild with default values when starting GiD again) Enrique ----- Original Message ----- From: miguel To: gidlist at gid.cimne.upc.edu Sent: Monday, March 09, 2009 6:36 PM Subject: RE: [GiDlist] Graphs don't show lines Can you send us a little example where this happens? You can also try the latest 9.1.1b, whch can be downloaded at ftp://www.gidhome.com/pub/gid_adds/Windows/win-x32/... [GiDlist] Graphs don't show lines
Send by: Smith, Mark Hi Enrique/Miguel deleting gid.ini (I just renamed it) caused GiD to start up with a corrupted display drawing area? so I uninstalled 9.0.2 & installed 9.1.1b, graphs still won't display lines? changing to safe mode has no effect. Attached is an example results file, I want to display a line graph from point (0,0,1) to (0,0,56.9) but then I get no lines, if I choose some other points or border graph then I get lines OK? regards mark ________________________________ From: gidlist-admin at gid.cimne.upc.edu [mailto:gidlist-admin at gid.cimne.upc.edu... [GiDlist] Graphs don't show lines
Send by: miguel Hello, I found the problem; it’s a bug when doing a line graph along an border of a quadrilateral mesh. To overcome this problem you can do a graph just bit below the border, for instance: from point 0.001,0,0 to point 0.001,0,56.9, then you’ll get a graph like this: This will be solved for the next version of GiD. Thanks for your help, Miguel Pasenau -- ---------------------------------------------------------------- Miguel Pasenau @: miguel at cimne.upc.edu Despacho C2, Edifico C1, Campus Norte UPC, c/ Gran Capitán s/n 08034 - Barcelona ( SPAIN) T: +34 3 93 401 74 03 F: +34 3 93 401 65 17 ---------------------------------------------------------------- IMPORTANT NOTICE All personal data contained in this mail will be processed confidentially and stored in a file property of CIMNE in order to manage corporate communications. You may exercise the right of access, rectification, deletion and objection by letter sent to CIMNE, Gran Capitán, Edificio C1 - Campus Norte UPC, 08034 Barcelona, Spain. _____ De: ... [GiDlist] Graphs don't show lines
Send by: Smith, Mark Thank you. regards mark ________________________________ From: gidlist-admin at gid.cimne.upc.edu [mailto:gidlist-admin at gid.cimne.upc.edu] On Behalf Of miguel Sent: 10 March 2009 10:34 To: gidlist at gid.cimne.upc.edu Subject: RE: [GiDlist] Graphs don't show lines Hello, I found the problem; it's a bug when doing a line graph along an border of a quadrilateral mesh. To overcome this problem you can do a graph just bit below the border, for instance: from point 0.001,0,0 to point 0.001,0,56.9, then you'll get a graph like this: This will be solved for the next version of GiD. Thanks for your help, Miguel Pasenau -- ---------------------------------------------------------------- Miguel Pasenau @: ... [GiDlist] postprocessing bug in GiD9.1.1b
Send by: Smith, Mark GiD 9.1.1b windows XP professional SP3
I get the following info in the info window when loading a
postprocessing file and doing an animation, this didn't happen with
9.0.2 ? It doesn't stop the postprocessing if I close the info window.
Regards
mark
original mesh FillPgInfo error(l4937): 1
CallTclFunction error(l1958): can't set "PostGeom::_MallaCopia(paso)":
bad option "0.0036167" in "show_geom_all_deform": must be { arewein, get
{ results_options, all_volumesets, all_surfacesets, all_cutsets,
cur_volumesets, cur_surfacesets, cur_cutsets, all_display_styles,
cur_display_style, all_analysis, all_steps, cur_analysis, cur_step,
all_results_views, all_graphs_views, cur_results_view, cur_results_list,
results_list, cur_result, cur_components_list, components_list,
cur_component, main_geom_state, main_geom_factor, main_geom_all_deform,
main_geom_cur_deform, show_geom_state, show_geom_factor,
show_geom_all_deform, show_geom_cur_deform, show_geom_cur_analysis,
show_geom_cur_step}}
ReadPostprocess error(l703): FillPGInfo - 1
CallTclFunction error(l1958): can't set "PostGeom::_MallaCopia(paso)":
bad option "0.0036167" in "show_geom_all_deform": must be { arewein, get
{ results_options, all_volumesets, all_surfacesets, all_cutsets,
cur_volumesets, cur_surfacesets, cur_cutsets, all_display_styles,
cur_display_style, all_analysis, all_steps, cur_analysis, cur_step,
all_results_views, all_graphs_views, cur_results_view, cur_results_list,
results_list, cur_result, cur_components_list, components_list,
cur_component, main_geom_state, main_geom_factor, main_geom_all_deform,
main_geom_cur_deform, show_geom_state, show_geom_factor,
show_geom_all_deform, show_geom_cur_deform, show_geom_cur_analysis,
show_geom_cur_step}}
deform mesh fillPgInfo error(l4574): 1
CallTclFunction error(l1958): can't set "PostGeom::_MallaCopia(paso)":
bad option "0.0036167" in "show_geom_all_deform": must be { arewein, get
{ results_options, all_volumesets, all_surfacesets, all_cutsets,
cur_volumesets, cur_surfacesets, cur_cutsets, all_display_styles,
cur_display_style, all_analysis, all_steps, cur_analysis, cur_step,
all_results_views, all_graphs_views, cur_results_view, cur_results_list,
results_list, cur_result, cur_components_list, components_list,
cur_component, main_geom_state, main_geom_factor, main_geom_all_deform,
main_geom_cur_deform, show_geom_state, show_geom_factor,
show_geom_all_deform, show_geom_cur_deform, show_geom_cur_analysis,
show_geom_cur_step}}
Please be advised that this email may contain confidential information.
If you are not the intended recipient, please do not read, copy or
re-transmit this email. If you have received this email in error,
please notify us by email by replying to the sender and by telephone
(call us collect at +1 202-828-0850) and delete this message and any
attachments. Thank you in advance for your cooperation and assistance.
In addition, Danaher and its subsidiaries disclaim that the content of
this email constitutes an offer to enter into, or the acceptance of,
any
contract or agreement or any amendment thereto; provided that the
foregoing disclaimer does not invalidate the binding effect of any
digital or other electronic reproduction of a manual signature that is
included in any attachment to this email.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: ...
[GiDlist] R: GiDlist digest, Vol 1 #1479 - 1 msg
Send by: m.cracco DESIDERO NON RICEVERE ALTRE MAIL DAL VOSTRO INDIRIZZO Please, I don't like recieve your mails any more PLEASE: STOP PLEASE STOP Thank you Massimo Cracco -----Messaggio originale----- Da: gidlist-admin at gid.cimne.upc.edu [mailto:gidlist-admin at gid.cimne.upc.edu] Per conto di gidlist-request at gid.cimne.upc.edu Inviato: lunedì 9 marzo 2009 20.17 A: gidlist at gid.cimne.upc.edu... [GiDlist] R: GiDlist digest, Vol 1 #1479 - 1 msg
Send by: m.cracco DESIDERO NON RICEVERE ALTRE MAIL DAL VOSTRO INDIRIZZO Please, I don't like recieve your mails any more PLEASE: STOP PLEASE: STOP WITH YOUR MAILS !!!!!!!!!!!!!!!!!!!!!!!! Massimo Cracco -----Messaggio originale----- Da: gidlist-admin at gid.cimne.upc.edu [mailto:gidlist-admin at gid.cimne.upc.edu] Per conto di gidlist-request at gid.cimne.upc.edu Inviato: lunedì 9 marzo 2009 20.17 A: gidlist at gid.cimne.upc.edu... [GiDlist] R: GiDlist digest, Vol 1 #1479 - 1 msg
Send by: Enrique Escolano Dear Massimo, You can change your subscription settings from the gidlist page , please try to do it by yourself: Go to http://www.gidhome.com/mailman/listinfo/gidlist on the bottom of the page set your email and press the "Edit options" button then set your password and press "Unsubscribe" Probably you have forgotten this password, then click the "Email My Password to Me" button and it will be send again to you by email Regards Enrique ----- Original Message ----- From: "m.cracco" <cracco.massimo at tiscali.it... [GiDlist] About the generate the Volume by contour
Send by: CHEN Ningning Dear GIDlist, Yes, I forgot to unselect the botton surface. But it's so difficulty to generate the mesh. I want to make structure mesh all the six-faceds volume. I't seems so hard. The problem is GiD does not allow the element be so huge longth:with, just like 1:5, on the unstructure mesh area. The error message is that "cound't mesh at this location". Just see my attachment. This is the biggest problem I meet. Best Regards， CHEN Ningning 2009-03-09 >I had no problem creating the volume. It was quite annoying, but using ... [GiDlist] Hi,there is a question about the unstructured mesh on thin plate
Send by: CHEN Ningning Dear GIDList， As I'm working on the problem about an thin plate in the air, the first time I fortunately mesh the plate with 20*20*4 mesh. After I goto another problem, I remesh on the plate, I find it is not OK to mesh it with the same setting agai. It is amazing. I can't find why. Maybe the 3-D unstructured mesh are so important and ramdon to structure? The geometry is as attached. Or Maybe the previouse mesh data is stored for the next generation? Best Regards， CHEN Ningning 2009-03-10 >... [GiDlist] Hi,there is a question about the unstructured mesh on thin plate
Send by: Adrià Melendo I don't know if this is the problem, but in Utilities->Preferences->Meshing there is an option of "Automatic correct sizes" You can select "none" option, this will not allow GiD to change any size. The problem is that if you don't assign size coherently, it could be impossible to mesh. In general, If GiD have to change the size of some entity is because the size of surround elements was too big or too small. Regards, Adria ________________________________ AVISO IMPORTANTE Los datos de carácter personal facilitados están registrados en un fichero con la finalidad de facilitar la gestión de las comunicaciones de CIMNE. Puede ejercitar los derechos de acceso, rectificación, cancelación y oposición mediante petición dirigiéndose a nuestras oficinas en Ed. C1 Campus Norte UPC. Gran Capitán s/n Barcelona AVIS IMPORTANT Les dades de caràcter personal facilitades seran registrades en un fitxer amb la finalitat de facilitar les gestions de les comunicacions de CIMNE. Pot exercir els drets d'accés, rectificació i cancel・lació, per escrit a les nostres oficines en Ed. C1 Campus Nord UPC. Gran Capità s/n Barcelona. IMPORTANT NOTICE All personal data contained on this mail will be processed confidentially and registered in a file property of CIMNE., in order to manage corporate communications. You may exercise the rights of access, rectification, erasure and object by letter sent to Ed. C1 Campus Norte UPC. Gran Capitán s/n Barcelona. -----Mensaje original----- De: ... [GiDlist] Hi,there is a question about the unstructured mesh on thin plate
Send by: Abel Coll Dear Chen, The way to ensure that you are using the same Meshing properties (the ones which appear in the Preferences->Meshing window) that the model had previously is to set Utilities->Status->SetMeshOptions. This function load the meshing properties saved with the model. Regards, ABEL _________________________________ Abel Coll Sans - Civil Engineer CIMNE - International Center for Numerical Methods in Engineering Ofice c-2, C1 building - Campus Nord UPC Gran Capità s/n, 08034 Barcelona T: 34 - 93 401 74 03 Fax: 34 - 93 40 65 17 ________________________________ AVISO IMPORTANTE Los datos de carácter personal contenidos en el mensaje, se registrarán en un fichero para facilitar la gestión de las comunicaciones de CIMNE. Se pueden ejercitar los derechos de acceso, rectificación, cancelación y oposición por escrito, dirigiéndose a nuestras oficinas de CIMNE, Gran Capitán s/n, Edificio C1 - Campus Norte UPC, 08034 Barcelona, España. AVÍS IMPORTANT Les dades de caràcter personal contingudes en aquest missatge es registraran en un fitxer per facilitar la gestió de les comunicacions del CIMNE. Es poden exercir els drets d'accés, rectificació, cancel·lació i oposició, per escrit a les nostres oficines del CIMNE, Gran Capità s/n, Edifici C1, Campus Nord UPC, 08034 Barcelona, Espanya. IMPORTANT NOTICE All personal data contained in this mail will be processed confidentially and stored in a file property of CIMNE in order to manage corporate communications. You may exercise the right of access, rectification, deletion and objection by letter sent to CIMNE, Gran Capitán, Edificio C1 - Campus Norte UPC, 08034 Barcelona, Spain. ________________________________ -----Mensaje original----- De: ... [GiDlist] Hi,there is a question about the unstructured mesh on thin plate
Send by: CHEN Ningning Dear gidlist, >The problem is that if you don't assign size coherently, it could be >impossible to mesh. I don't know the meaning that "if you don't assign size coherently". Are there some imformation about the coherent size to assign? I will try none correct sizes. Thanks, Best Regards， CHEN Ningning 2009-03-10 >I don't know if this is the problem, but in Utilities->Preferences->Meshing >there is an option of "Automatic correct sizes" You can select "none" ... [GiDlist] a question about the long and short line in a structure complex geometry
Send by: CHEN Ningning Dear gidlist, I trid many times to mesh the geometry and failed. There are short line and long line in my structured geometry, and I don't care about the solution throught the long line, so I wish the mesh size is long. I care about the shortest line and I wish the number of intervals are 4 and I also care about the thick(Z direction) ,and I wish the number of intervals are 6-8. The error massage is "coun't mesh at this location". But my mesh are structured and the surface mesh are so good. I trid the "atuo crect the size" on and normal. and the "unstructured size transitions" 0-1, the RFast and Rsurf surface mesher. How can I deal with this problem. If I set 50-80 to the long side of the structured geometry, It can mesh but the mesh number is so big,about 70,000. But my care line(shortest in my 6-side volume) is devide only 1 interval and care thick(Z) of the 4. the attachment is the geometry and a test geometry. Thanks, Best Regards， CHEN Ningning 2009-03-10 >... [GiDlist] New GiD 9.1.1b Beta version avaible
Send by: Adrià Melendo GiD The personal pre and post processor <http://www.gidhome.com/whats%20new/imagesmail/top.jpg> New GiD 9.1.1b Beta version avaible Remember that GiD 9 password is valid for any 9.x.x version. Also a new official version 9.0.4 has been published with some minor fixed bugs. See below 9.1.1b Beta version news: <http://www.gidhome.com/> GiD Home <http://www.gidhome.com/download/do07.html> Download Now Preprocess: * Boundary layer mesh generation in 3D. * Rhinoceros 4.0 export. * Creation of a NURBS surface from triangle elements. * Improvements in quadrilateral mesher. * Time savings in mesh compatibilities checking (before begining the mesh generation), and reading mesh files. * Boolean operations: 'NoDeleteVolumes' and 'NoDeleteSurfaces' subcommand to maintain the source entities. * Cartesian mesh improvements. * Layers window enhanced: fully redisegned window, with tree of layers, integrated layout, etc. * Selection: • New filter:NumSides=xx , where xx is the number of sides of the entity (sufaces or volumes). • 'ParentsOf' command, to select the parents of some entity. * Import of x y z ASCII files as points of nodes. * Export template DXFSAP2000 updated. * Two more variables to control the chordal error of the whole model when generating the mesh. Postprocess: * Graphs: logarithmic scales, draw axes and labels, select grid color. * Animation: several options to control the duration of the animation, including the use of the step values. * Draw arrows option in stream lines. * GiD variable OGL_useMeshObjects, to activate/deactivate OpenGL draw lists. * Time savings doing cuts. * STL ascii and binary export of triangular and quadrilateral meshes. Only the displayed ones are exported. * New Points/Circles/Spheres visualization mode: Internal texture. This option is a compromise between a nice view and a quick response time. * Display of axes, Matlab like, for the visualized model. * Option, when opened or written files, to attach the progress bar in main windows, avoiding unnecessary redraws. * Visualization of scaled results, including the logarithm of the result: log( factor * ResultValue + Offset). * New option to improve the quality of the saved GIF. * The new meshes created with transformations have the same colour as the originals. Generic: * Internal changes for future Mac OSX version (soon available), and offscreen rendering. * Fixed some Windows Vista platform problems: • Lock when showing big meshes. • Sysinfo bugs. • Graphical problems with Aero Glass and Intel graphic cards: use emulation of front buffer. * Software OpenGL option in the graphical preferences window, to enable/disable the hardware acceleration. * Zoom centered on the current cursor when using mouse wheel. For problemtype developers: * Updated to Tcl/Tk 8.5.6 * New Tcl commands and events to give to problemtype more control over user issues. * New Tcl_Obj types to handle efficiently vectors and arrays. * Conditions 'over face element single', the face with the same normal as the source surface will be marked. * GiD_Geometry can get and create more types of surfaces: plsurface, coonsurface and meshsurface. More detailed info here <... [GiDlist] graded index profile
Send by: sohel sher Hi GID experts,
I want to simulate a structure with graded refractive index profile.Does GID allow us to do it?Thank you.
sohel
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20090311/4f61cb10/attachment.htm
[GiDlist] graded index profile
Send by: Enrique Escolano Sorry, we don't know any optical code coupled to GiD to do this kind of simulation.
Enrique
----- Original Message -----
From: sohel sher
To: GID list
Sent: Wednesday, March 11, 2009 10:38 AM
Subject: [GiDlist] graded index profile
Hi GID experts,
I want to simulate a structure with graded refractive index profile.Does GID allow us to do it?Thank you.
sohel
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20090312/0270681b/attachment.htm...
[GiDlist] graded index profile
Send by: Smith, Mark Hi You could of course split your material into many layers & assign a different index to each layer for your external optical code to use? mark ________________________________ From: gidlist-admin at gid.cimne.upc.edu [mailto:gidlist-admin at gid.cimne.upc.edu] On Behalf Of Enrique Escolano Sent: 12 March 2009 10:32 To: gidlist at gid.cimne.upc.edu Subject: Re: [GiDlist] graded index profile Sorry, we don't know any optical code coupled to GiD to do this kind of simulation. Enrique ----- Original Message ----- From: sohel sher <mailto:... [GiDlist] graded index profile
Send by: sohel sher Thanks Mark.How many layers and of what widths could be possible in this way?Is there any maximum limit in GID?Thank you. sohel --- On Thu, 3/12/09, Smith, Mark <Mark.Smith at linx.co.uk> wrote: From: Smith, Mark <Mark.Smith at linx.co.uk> Subject: RE: [GiDlist] graded index profile To: gidlist at gid.cimne.upc.edu Date: Thursday, March 12, 2009, 3:39 AM Hi You could of course split your material into many layers & assign a different index to each layer for your external optical code to use? mark From: ... [GiDlist] graded index profile
Send by: Enrique Escolano There is no practical limitation on the number of Layers of GiD (the maximum id=2.147.483.648 , for a 32 bits signed integer) The real limit will be the available memory, and off course the Layers window is not designed for so big number of layers and probably become unoperative. ----- Original Message ----- From: sohel sher To: gidlist at gid.cimne.upc.edu Sent: Thursday, March 12, 2009 1:15 PM Subject: RE: [GiDlist] graded index profile Thanks Mark.How many layers and of what widths could be possible in this way?Is there any maximum limit in GID?Thank you. sohel --- On Thu, 3/12/09, Smith, Mark <... [GiDlist] a question about the long and short line in a structure complex geometry
Send by: CHEN Ningning Dear gidlist, I trid many times to mesh the geometry and failed. There are short line and long line in my structured geometry, and I don't care about the solution throught the long line, so I wish the mesh size is long. I care about the shortest line and I wish the number of intervals are 4 and I also care about the thick(Z direction) ,and I wish the number of intervals are 6-8. The error massage is "coun't mesh at this location". But my mesh are structured and the surface mesh are so good. I trid the "atuo crect the size" on and normal. and the "unstructured size transitions" 0-1, the RFast and Rsurf surface mesher. How can I deal with this problem? If I set 50-80 to the long side of the structured geometry, It can mesh but the mesh number is so big,about 70,000. But my care line(shortest in my 6-side volume) is devide only 1 interval and care thick(Z) of the 4. the attachment is the geometry and a test geometry. Thanks, Best Regards， CHEN Ningning 2009-03-10 >... [GiDlist] GID 9.0.4 bug
Send by: Smith, Mark OS: Win xp professional sp3 Hi Due to problems I was having with 9.1.1b, I reverted to 9.0.4 but had a problem in using calculate for my problemtype, the dialogue suggests that something is happening & that it completes OK but I get no files written in the model directory where I usually expect them. In the command line toolbar window I get the following info: File written OK Process 'print_head_current_with_dam' started at Tue Mar 17 10:01:10 has finished. I have searched the hard drive & cannot find the files anywhere? I have now reverted to 9.0.2 & all is OK again. This version doesn't seem to be available from the GID download area any more? Regards mark Please be advised that this email may contain confidential information. If you are not the intended recipient, please do not read, copy or re-transmit this email. If you have received this email in error, please notify us by email by replying to the sender and by telephone (call us collect at +1 202-828-0850) and delete this message and any attachments. Thank you in advance for your cooperation and assistance. In addition, Danaher and its subsidiaries disclaim that the content of this email constitutes an offer to enter into, or the acceptance of, any contract or agreement or any amendment thereto; provided that the foregoing disclaimer does not invalidate the binding effect of any digital or other electronic reproduction of a manual signature that is included in any attachment to this email. ... [GiDlist] GID 9.0.4 bug
Send by: Enrique Escolano Hello Mark, thanks for this bug report. The problem to start the calculation happen only with the 9.0.4 winx32 version It was fixed yesterday. You can download and install again GiD9.0.4-win32 from our web, or you can simply copy the attached 'command.ex_' file, and rename it to replace the current 'command.exe' located in the same folder that 'gid.exe' Regards Enrique Escolano ----- Original Message ----- From: "Smith, Mark" <Mark.Smith at linx.co.uk> To: <gidlist at gid.cimne.upc.edu... [GiDlist] Drawing and selection lines don't show up in GiD 9.1.1b
Send by: Nunzio Losacco Hi everyone,
finally GiD 9.1.1b solved the black screen issue when running with the
newest NVIDIA drivers (180.xx).
Now I cannot see any selection window although selection still works. I
can't see lines while drawing them, either, although new lines do show up
when I finish drawing them. Selected nodes and elements don't get
highlighted. None of these problems occur if I run GiD in safe mode, anyway.
Thank you very much for your support.
Nunzio Losacco
PS: I'm using GiD 9.1.1b 64 bit version on Linux Fedora 10 - x86_64. My
graphic card is a NVIDIA GeForce 9400 GT. Here's the output of Help -> About
-> More:
GiD internal version: 9.1.1b
Operating system: 'x86_64' 'unix' 'Linux' '2.6.27.19-170.2.35.fc10.x86_64'
Tcl8.5.6 Tk8.5(8.5.6)
Linux warp-laptop2 2.6.27.19-170.2.35.fc10.x86_64 {#1 SMP Mon Feb 23
13:00:23 EST 2009} x86_64
Togl 1.7: GLX visual id 0x28, attempt 1.
There is no overlay GLX context.
OpenGl:
VENDOR: {NVIDIA Corporation}
RENDERER: {GeForce 9200M GS/PCI/SSE2}
VERSION: {3.0.0 NVIDIA 180.29}
DISPLAY INFORMATION: {bits red 8, green 8, blue 8, alpha 8, depth 24,
stencil 0, stereo no.}
EXTENSIONS: {
GL_ARB_color_buffer_float
GL_ARB_depth_texture
GL_ARB_draw_buffers
GL_ARB_draw_instanced
GL_ARB_fragment_program
GL_ARB_fragment_program_shadow
GL_ARB_fragment_shader
GL_ARB_framebuffer_object
GL_ARB_geometry_shader4
GL_ARB_half_float_pixel
GL_ARB_half_float_vertex
GL_ARB_imaging
GL_ARB_map_buffer_range
GL_ARB_multisample
GL_ARB_multitexture
GL_ARB_occlusion_query
GL_ARB_pixel_buffer_object
GL_ARB_point_parameters
GL_ARB_point_sprite
GL_ARB_shader_objects
GL_ARB_shading_language_100
GL_ARB_shadow
GL_ARB_texture_border_clamp
GL_ARB_texture_buffer_object
GL_ARB_texture_compression
GL_ARB_texture_cube_map
GL_ARB_texture_env_add
GL_ARB_texture_env_combine
GL_ARB_texture_env_dot3
GL_ARB_texture_float
GL_ARB_texture_mirrored_repeat
GL_ARB_texture_non_power_of_two
GL_ARB_texture_rectangle
GL_ARB_texture_rg
GL_ARB_transpose_matrix
GL_ARB_vertex_array_object
GL_ARB_vertex_buffer_object
GL_ARB_vertex_program
GL_ARB_vertex_shader
GL_ARB_window_pos
GL_ATI_draw_buffers
GL_ATI_texture_float
GL_ATI_texture_mirror_once
GL_EXT_abgr
GL_EXT_bgra
GL_EXT_bindable_uniform
GL_EXT_blend_color
GL_EXT_blend_equation_separate
GL_EXT_blend_func_separate
GL_EXT_blend_minmax
GL_EXT_blend_subtract
GL_EXT_Cg_shader
GL_EXT_compiled_vertex_array
GL_EXT_depth_bounds_test
GL_EXT_direct_state_access
GL_EXT_draw_buffers2
GL_EXT_draw_instanced
GL_EXT_draw_range_elements
GL_EXT_fog_coord
GL_EXT_framebuffer_blit
GL_EXT_framebuffer_multisample
GL_EXT_framebuffer_object
GL_EXT_framebuffer_sRGB
GL_EXT_geometry_shader4
GL_EXT_gpu_program_parameters
GL_EXT_gpu_shader4
GL_EXT_multi_draw_arrays
GL_EXT_packed_depth_stencil
GL_EXT_packed_float
GL_EXT_packed_pixels
GL_EXT_pixel_buffer_object
GL_EXT_point_parameters
GL_EXT_rescale_normal
GL_EXT_secondary_color
GL_EXT_separate_specular_color
GL_EXT_shadow_funcs
GL_EXT_stencil_two_side
GL_EXT_stencil_wrap
GL_EXT_texture3D
GL_EXT_texture_array
GL_EXT_texture_buffer_object
GL_EXT_texture_compression_latc
GL_EXT_texture_compression_rgtc
GL_EXT_texture_compression_s3tc
GL_EXT_texture_cube_map
GL_EXT_texture_edge_clamp
GL_EXT_texture_env_add
GL_EXT_texture_env_combine
GL_EXT_texture_env_dot3
GL_EXT_texture_filter_anisotropic
GL_EXT_texture_integer
GL_EXT_texture_lod
GL_EXT_texture_lod_bias
GL_EXT_texture_mirror_clamp
GL_EXT_texture_object
GL_EXT_texture_shared_exponent
GL_EXT_texture_sRGB
GL_EXT_texture_swizzle
GL_EXT_timer_query
GL_EXT_vertex_array
GL_EXT_vertex_array_bgra
GL_EXTX_framebuffer_mixed_formats
GL_IBM_rasterpos_clip
GL_IBM_texture_mirrored_repeat
GL_KTX_buffer_region
GL_NV_blend_square
GL_NV_conditional_render
GL_NV_copy_depth_to_color
GL_NV_depth_buffer_float
GL_NV_depth_clamp
GL_NV_explicit_multisample
GL_NV_fence
GL_NV_float_buffer
GL_NV_fog_distance
GL_NV_fragment_program
GL_NV_fragment_program2
GL_NV_fragment_program_option
GL_NV_framebuffer_multisample_coverage
GL_NV_geometry_shader4
GL_NV_gpu_program4
GL_NV_half_float
GL_NV_light_max_exponent
GL_NV_multisample_coverage
GL_NV_multisample_filter_hint
GL_NV_occlusion_query
GL_NV_packed_depth_stencil
GL_NV_parameter_buffer_object
GL_NV_pixel_data_range
GL_NV_point_sprite
GL_NV_primitive_restart
GL_NV_register_combiners
GL_NV_register_combiners2
GL_NV_texgen_reflection
GL_NV_texture_compression_vtc
GL_NV_texture_env_combine4
GL_NV_texture_expand_normal
GL_NV_texture_rectangle
GL_NV_texture_shader
GL_NV_texture_shader2
GL_NV_texture_shader3
GL_NV_transform_feedback
GL_NV_vertex_array_range
GL_NV_vertex_array_range2
GL_NV_vertex_program
GL_NV_vertex_program1_1
GL_NV_vertex_program2
GL_NV_vertex_program2_option
GL_NV_vertex_program3
GL_NVX_conditional_render
GL_S3_s3tc
GL_SGIS_generate_mipmap
GL_SGIS_texture_lod
GL_SGIX_depth_texture
GL_SGIX_shadow
GL_SUN_slice_accum
}
GLX::
SERVER: {
GLX_ARB_create_context
GLX_ARB_fbconfig_float
GLX_ARB_multisample
GLX_EXT_framebuffer_sRGB
GLX_EXT_texture_from_pixmap
GLX_EXT_visual_info
GLX_EXT_visual_rating
GLX_NV_float_buffer
GLX_SGI_swap_control
GLX_SGI_video_sync
GLX_SGIX_fbconfig
GLX_SGIX_pbuffer
} {NVIDIA Corporation} 1.4
CLIENT: {
GLX_ARB_create_context
GLX_ARB_fbconfig_float
GLX_ARB_get_proc_address
GLX_ARB_multisample
GLX_EXT_fbconfig_packed_float
GLX_EXT_framebuffer_sRGB
GLX_EXT_import_context
GLX_EXT_texture_from_pixmap
GLX_EXT_visual_info
GLX_EXT_visual_rating
GLX_NV_float_buffer
GLX_NV_multisample_coverage
GLX_NV_present_video
GLX_NV_swap_group
GLX_NV_video_out
GLX_SGI_swap_control
GLX_SGI_video_sync
GLX_SGIX_fbconfig
GLX_SGIX_pbuffer
} {NVIDIA Corporation} 1.4
OVERLAY: 0
OVERLAY IN MENU: 0
-------------- next part --------------
An HTML attachment was scrubbed...
URL: ...
[GiDlist] Re: Drawing and selection lines don't show up in GiD 9.1.1b
Send by: Nunzio Losacco Hey, I think I solved the problem from Utilities -> Preferences -> Graphical and then checking "Emulate Front Buffer (dynamic lines hack)" even if I have no idea of what it means. Now I only need to find out how to save this preference. Regards, Nunzio. 2009/3/17 Nunzio Losacco <nunzio.losacco at gmail.com> > Hi everyone, > > finally GiD 9.1.1b solved the black screen issue when running with the > newest NVIDIA drivers (180.xx). > Now I cannot see any selection window although selection still works. I >... [GiDlist] Re: Drawing and selection lines don't show up in GiD 9.1.1b
Send by: miguel Hi, Hey that’s what i was about you to suggest ;) Selection lines, and any dynamic lines in GiD, like the ones when creating spheres, are drawn in front buffer, to avoid repaint the model. But it seems that with the visual effects ( compiz) active they do not work very well. Until now I know about ati drivers. This behaviour also appears on Intel graphics cards in MS Windows Vista with the ‘aero’ window manager active. In this case ‘emulateFrontBuffer’ is automatically switched on. The ‘emulateFrontBuffer’ tries to emulate the painting of these dynamic lines in the front buffer by drawing the model (as a picture) and the dynamic lines in the back buffer and then swap the buffers, and thus avoiding drawing in the front buffer. Do you have compiz active? In ubuntu, in the top menu bar of the ‘Desktop’ it’s under ‘System-->preferences --> Appereance‘ with the label ‘Visual effects’ In Fedora 7 it’s under System --> Preferences --> Look and Feel --> Desktop Effects. If you have them enabled, can you try disabling them and using the selection without the ‘emulate front buffer’ active? Thanks, Miguel Pasenau -- ---------------------------------------------------------------- Miguel Pasenau @: ... [GiDlist] Re: Drawing and selection lines don't show up in GiD 9.1.1b
Send by: Nunzio Losacco Hi Miguel, no I don't have visual fx switched on. How can I have "emulate front buffer" automatically switched on at startup? Thanx again, N. 2009/3/18 miguel <miguel at cimne.upc.edu> > Hi, > > Hey… that’s what i was about you to suggest ;) > > > > Selection lines, and any dynamic lines in GiD, like the ones when creating > spheres, are drawn in front buffer, to avoid repaint the model. But it seems > that with the visual effects ( compiz) active they do not work very well. ... [GiDlist] Re: Drawing and selection lines don't show up in GiD 9.1.1b
Send by: miguel Hi, This variable is not saved. It will for the next version. In the meantime, you can create a macro to enable this option quicker: 1. Start gid. 2. Open the preferences window and the ‘Graphical’ panel 3. Start recording the macro ( the dark red circle on the second vertical toolbar): 4. Check the ‘Emulate Front Buffer’ checkbox and press the ‘Accept’ button on the bottom of the window 5. Stop recording the macro ( the dark red square on the second vertical toolbar): 6. an icon with a wand with a number will appear, if it’s your first recorded macro, the number will be ‘1’. With this macro you only need to click on the icon to enable the ‘Emulate FrontBuffer’ option, instead of doing it through the preferences window. With the second icon, just below the dark red circle, the one with the pencil, you can edit the options of the macro: add a help text or assign a shortcut to this macro. Hope it helps, Miguel Pasenau -- ---------------------------------------------------------------- Miguel Pasenau @: ... [GiDlist] GiD 9.0.4 bug
Send by: Smith, Mark Hi Enrique Thanks for the fix, I'll download it again & give it another try. Regards mark Please be advised that this email may contain confidential information. If you are not the intended recipient, please do not read, copy or re-transmit this email. If you have received this email in error, please notify us by email by replying to the sender and by telephone (call us collect at +1 202-828-0850) and delete this message and any attachments. Thank you in advance for your cooperation and assistance. In addition, Danaher and its subsidiaries disclaim that the content of this email constitutes an offer to enter into, or the acceptance of, any contract or agreement or any amendment thereto; provided that the foregoing disclaimer does not invalidate the binding effect of any digital or other electronic reproduction of a manual signature that is included in any attachment to this email. ... [GiDlist] GiD 9.0.4 bug
Send by: Enrique Escolano We careful, Now our current web version is Ok, but if you have downloaded the previous file recently your "Internet browser" could have stored in a temporary folder a copy of the old GiD9.0.4-win-x32.exe and when you try to download it again instead to get the new version it provide your last cached local version of this file !!! In your Internet options of your browser press the button to delete all temporary cached files You can try to donwload also using this ftp address ftp://gid.cimne.upc.es/pub/gid/Windows The md5 checksum of the downloaded file must be the same that the showed in the ftp txt files: MD5 GiD9.0.4-win-x32.exe must be 4be3c8348d491eb921d58486715d916c and MD5 GiD9.0.4-win-x64.exe must be 5c3be295130e3b3f81fe5b268c56489d (you can download the md5.exe auxiliary program also from the related ftp) If do you have a different checksum then your download was wrong. Enrique ----- Original Message ----- From: "Smith, Mark" <... [GiDlist] GiD 9.0.4 bug
Send by: Ramon Ribó Kike, Ya conoces mi opinión de que jamás hay que poner en la web pública dos versiones con el mismo nombre. Luego queda muy chapuzas tener que dar estas explicaciones. 2009/3/18 Enrique Escolano <escolano at cimne.upc.edu>: > We careful, Now our current web version is Ok, but if you have downloaded > the previous file recently your "Internet browser" could have stored in a > temporary folder a copy of the old GiD9.0.4-win-x32.exe > and when you try to download it again instead to get the new version it ... [GiDlist] Renumbering in postprocessing
Send by: Smith, Mark Windows XP professional sp3, GiD 9.0.4 Hi GiD team I have a mesh & results file on a 3D mesh (tets) but I'm only interested in the results on the surface, co in preprocessing after meshing I can delete the volume sets to just leave the surface triangles & save the resulting mesh by exporting it to results.flavia.msh . In post processing I can now open the results & see just the values on the surface which is what I want. Is there a way I can renumber the postprocessing mesh & results file for export that makes my nodes numbers contiguous starting at 1 & the same for my elements? As Id like to use this for another analysis that requires this? Or must I write a separate program to do this? Regards mark Please be advised that this email may contain confidential information. If you are not the intended recipient, please do not read, copy or re-transmit this email. If you have received this email in error, please notify us by email by replying to the sender and by telephone (call us collect at +1 202-828-0850) and delete this message and any attachments. Thank you in advance for your cooperation and assistance. In addition, Danaher and its subsidiaries disclaim that the content of this email constitutes an offer to enter into, or the acceptance of, any contract or agreement or any amendment thereto; provided that the foregoing disclaimer does not invalidate the binding effect of any digital or other electronic reproduction of a manual signature that is included in any attachment to this email. ... [GiDlist] confirm 687692
Send by: MARION Jean Marc confirm 687692 -------------- next part -------------- An HTML attachment was scrubbed... URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20090319/012daf02/attachment.htm [GiDlist] element axes
Send by: MARION Jean Marc Actually, I am testing Gid functionalities. I would like to know if it is possible to choose and/or to view the local axes of the elements: I need this function to use non-orthotropic material. Regards Jean-Marc Marion Ingénieur Structures CERA Paris Lyon, Agence de Lyon Les bureaux de Chalin 20, Chemin Louis Chirpaz 69134 Ecully Cedex Tel. 04 72 18 02 40 Fax 04 78 64 71 49 -------------- next part -------------- An HTML attachment was scrubbed... URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20090319/26b9ca29/attachment.htm... [GiDlist] Problem with the postprocessor
Send by: Samir Omerovic Dear gid-list, I have a question about the postprocessor. If I try to view results (it's a 3-d example) my pc crashes (my screen flickers or my screen freeze so I cannot do anything ) The detailed description of the commands is Window-View Results - Main Mesh (Deform main mesh-Deformed, factor=100)-View Results (View-Display vectors, Displacements- z-displacements)- Apply I use Kubuntu 8.04 I suppose the problem is the graphic board. Does anyone have similar problems? Thanks -------------- next part -------------- An HTML attachment was scrubbed... URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20090324/ddba091a/attachment.htm... [GiDlist] Problem with the postprocessor
Send by: miguel Hi, Can you provide us with an example so we can check it and find the problem? Which graphics card are you using? Are you using the hw acceleration? Can you send us the output of ‘glxinfo’? Thanks Miguel Pasenau -- ---------------------------------------------------------------- Miguel Pasenau @: miguel at cimne.upc.edu Despacho C2, Edifico C1, Campus Norte UPC, c/ Gran Capitán s/n 08034 - Barcelona ( SPAIN) T: +34 3 93 401 74 03 F: +34 3 93 401 65 17 ---------------------------------------------------------------- IMPORTANT NOTICE All personal data contained in this mail will be processed confidentially and stored in a file property of CIMNE in order to manage corporate communications. You may exercise the right of access, rectification, deletion and objection by letter sent to CIMNE, Gran Capitán, Edificio C1 - Campus Norte UPC, 08034 Barcelona, Spain. _____ De: ... [GiDlist] Contact element
Send by: luismm at lnec.pt Dear gid-list, Can anyone help me. I want to generate interface elements (contact) with GiD (4-node quadrilaterals are fine). I ‘m creating a “contact surface” from 2 lines in the same position. GiD generates the 4-node quadrilaterals but at the line edges the nodes are not duplicated and the quadrilateral possesses the same node twice (see file). Can I avoid this? Thank you in advance. Regards, Luís Mendes -------------- next part -------------- A non-text attachment was scrubbed... Name: contact.jpg Type: image/pjpeg Size: 5445 bytes Desc: not available Url : http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20090325/73656cc6/attachment.bin... [GiDlist] Contact element
Send by: Abel Coll Dear Luis, It seams that the two lines which form the ContactSurface are sharing their starting and ending nodes. Each geometrical point can only generate one mesh node. To solve this problem, you must duplicate the nodes, so as each line have its own geometrical starting and ending point. Regards, ABEL _________________________________ Abel Coll Sans - Civil Engineer CIMNE - International Center for Numerical Methods in Engineering Ofice c-2, C1 building - Campus Nord UPC Gran Capità s/n, 08034 Barcelona T: 34 - 93 401 74 03 Fax: 34 - 93 40 65 17 ________________________________ AVISO IMPORTANTE Los datos de carácter personal contenidos en el mensaje, se registrarán en un fichero para facilitar la gestión de las comunicaciones de CIMNE. Se pueden ejercitar los derechos de acceso, rectificación, cancelación y oposición por escrito, dirigiéndose a nuestras oficinas de CIMNE, Gran Capitán s/n, Edificio C1 - Campus Norte UPC, 08034 Barcelona, España. AVÍS IMPORTANT Les dades de caràcter personal contingudes en aquest missatge es registraran en un fitxer per facilitar la gestió de les comunicacions del CIMNE. Es poden exercir els drets d'accés, rectificació, cancel·lació i oposició, per escrit a les nostres oficines del CIMNE, Gran Capità s/n, Edifici C1, Campus Nord UPC, 08034 Barcelona, Espanya. IMPORTANT NOTICE All personal data contained in this mail will be processed confidentially and stored in a file property of CIMNE in order to manage corporate communications. You may exercise the right of access, rectification, deletion and objection by letter sent to CIMNE, Gran Capitán, Edificio C1 - Campus Norte UPC, 08034 Barcelona, Spain. ________________________________ -----Mensaje original----- De: ... [GiDlist] adaptive remeshing
Send by: Helver Mauricio Barrera Cardenas Dear Sir, I've succesfully generated a .bgm file for adaptive remeshing purposes; I have also sucessfully opened up the .bgm file in GiD preprocess; nevertheless, at the time of generating the mesh GiD asks me for an "element size". I did not expect this since, in the .bgm file there's an array of element sizes specified at the nodes of the background mesh. What is the meaning of that "element size" enquiry, and what value should I type in therefore? Kind Regards, Mauricio Barrera Universidad Autonoma de Occidente Cali-Colombia (South America) P.S. Is the advancing front method the one GiD uses for 2D meshing? just to be able to use Zienkiewicz' book chapter 8 (automatic meshing) -------------- next part -------------- An HTML attachment was scrubbed... URL: ... [GiDlist] Labels
Send by: Nunzio Losacco Hi guys, is there any reason why I cannot see labels in my model? Simply, the show labels button doesn't seem to work. Using software acceleration doesn't change the situation. I'm using GiD9.1.1b x64 on Fedora 10 linux. Using NVIDIA GT9400 with 180.29 drivers. I'm using the same version on my laptop with NVIDIA G9200M card. Show label works there, anyway. Thanks, Nunzio. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20090326/a6e35cb5/attachment.htm... [GiDlist] Labels
Send by: miguel Hello, can you elaborate about this? is it i pre? in ost? when you try to label gmetrical entities or mesh elements or nodes? where is the 'show labels' button? it happens wih all your models or just some of them? Can you send us a little example where this happens? Thanks, Miguel Pasenau -- ---------------------------------------------------------------- Miguel Pasenau @: miguel at cimne.upc.edu Despacho C2, Edifico C1, Campus Norte UPC, c/ Gran Capitán s/n 08034 - Barcelona ( SPAIN) T: +34 3 93 401 74 03 F: +34 3 93 401 65 17 ---------------------------------------------------------------- IMPORTANT NOTICE All personal data contained in this mail will be processed confidentially and stored in a file property of CIMNE in order to manage corporate communications. You may exercise the right of access, rectification, deletion and objection by letter sent to CIMNE, Gran Capitán, Edificio C1 - Campus Norte UPC, 08034 Barcelona, Spain. _____ De: ... [GiDlist] Visualization of multiple results
Send by: fsalazar at cimne.upc.edu Good morning I have a problem during the visualization of multiple results. I've been told that GiD cracks when you try to open multiple files making more than 2GB. I always check that circumstance, but I'm havig a lot of problems when trying to open more than around 50 files. It says: "Microsoft Visual C++ Runtime library. Runtime error. Abnormal program termination" The worst is that it always stops when I've been waiting for some minutes, most of the times when it is opening the last file!! It makes me waste a lot of time. I'm working with the professional portable 9.0.2 version. Windows, 32 bits. Thank you in advance! Fernando Salazar González Ingeniero de Caminos, Canales y Puertos CIMNE Avda. Doctor Arce, 14. 28002 Madrid. Tel. +34 917 610 274 Móvil. +34 610 234 477 Fax. +34 915 612 987 ... [GiDlist] Visualization of multiple results (II)
Send by: fsalazar at cimne.upc.edu I forgot to tell you that I used to open multiple files while running three processes (I have a quad-core). I tried to avoid this problem by stopping these processes, and then I tried to restart my computer. Neither of these worked. Fernando Salazar González Ingeniero de Caminos, Canales y Puertos CIMNE Avda. Doctor Arce, 14. 28002 Madrid. Tel. +34 917 610 274 Móvil. +34 610 234 477 Fax. +34 915 612 987 fsalazar at cimne.upc.edu www.cimne.com -------------------------------------------------- AVISO IMPORTANTE Los datos de carácter personal contenidos en el mensaje, se registrarán en un fichero para facilitar la gestión de las comunicaciones de CIMNE. Se pueden ejercitar los derechos de acceso, rectificación, cancelación y oposición por escrito, dirigiéndose a nuestras oficinas de CIMNE, Gran Capitán s/n, Edificio C1 - Campus Norte UPC, 08034 Barcelona, España. AVÍS IMPORTANT Les dades de caràcter personal contingudes en aquest missatge es registraran en un fitxer per facilitar la gestió de les comunicacions del CIMNE. Es poden exercir els drets d'accés, rectificació, cancel·lació i oposició, per escrit a les nostres oficines del CIMNE, Gran Capità s/n, Edifici C1, Campus Nord UPC, 08034 Barcelona, Espanya. IMPORTANT NOTICE All personal data contained in this mail will be processed confidentially and stored in a file property of CIMNE in order to manage corporate communications. You may exercise the right of access, rectification, deletion and objection by letter sent to CIMNE, Gran Capitán, Edificio C1-Campus Norte UPC, 08034 Barcelona, Spain. ... [GiDlist] Visualization of multiple results (II)
Send by: Enrique Escolano Check the Windows "Task manager" to see how much RAM is spending GiD. On Windows x32 if the gid.exe process spend as you said 2 GB (of RAM, not of file size, files are usually compressed) it will crash If do you have XP x32 an more than 2GB of physical RAM, could try to use until 3GB by process with this trick: http://www.gidhome.com/support_team/faq_toc/faq40.html#GiD%20and%20the%20Operating%20System>How%20to%20make%20GiD%20use%20more%20than%202GB%20on%20Windows%20XP? If your results are so big, maybe you need a 64 bits version of GiD and more physical RAM Probably you can write less results or less time steps in your results file to be able to handle them. Regards Enrique ----- Original Message ----- From: <... [GiDlist] Re: GiDlist digest, Vol 1 #1507 - 4 msgs
Send by: fsalazar at cimne.upc.edu Thank you for your comments. Indeed, I have 8 GB of physical RAM. I know I must work in LINUX, but I still haven't had time to install GiD for LINUX, and learn how to use LINUX (which I have never used before) Thank you again > Send GiDlist mailing list submissions to > gidlist at gid.cimne.upc.edu > > To subscribe or unsubscribe via the World Wide Web, visit > http://gid.cimne.upc.es/mailman/listinfo/gidlist > or, via email, send a message with subject or body 'help' to ... [GiDlist] Re: GiDlist digest, Vol 1 #1507 - 4 msgs
Send by: Enrique Escolano It's not necessary to change to Linux, you can also use a Windows x64 operating system, and a GiD winx64 version ----- Original Message ----- From: <fsalazar at cimne.upc.edu> To: <gidlist at gid.cimne.upc.edu> Sent: Friday, March 27, 2009 12:01 PM Subject: [GiDlist] Re: GiDlist digest, Vol 1 #1507 - 4 msgs > Thank you for your comments. > > Indeed, I have 8 GB of physical RAM. I know I must work in LINUX, but I > still haven't had time to install GiD for LINUX, and learn how to use ... [GiDlist] Use 3 GB physical RAM on Windows XP
Send by: fsalazar at cimne.upc.edu Good morning Thank for tour support. I tried to apply the trick you proposed for use 3 GB of physical RAM on Windows XP, but I have a problem. There is not a folder in C/program files called Microsoft Visual Studio. Any idea? Thanks >Check the Windows "Task manager" to see how much RAM is spending GiD. > On Windows x32 if the gid.exe process spend as you said 2 GB (of RAM, not > of > file size, files are usually compressed) it will crash > > If do you have XP x32 an more than 2GB of physical RAM, could try to use > until 3GB by process with this trick: > ... [GiDlist] Use 3 GB physical RAM on Windows XP
Send by: Enrique Escolano You don't need to have Visual studio, GiD was already compiled with this /LARGEADDREASSAWARE flag (from the version 7.5.x) You only need to configure Windows XP in this way: MS Windows XP should be configured by adding the flag /3G to the Boot.ini file. To do this just open the Control panel, click on the System icon, on the Advanced options panel, then press the Configuration button of the Start and recuperation section. In this window click on the Edit button inside the System start section and the Notepad will pop-up with the Boot.ini file opened. In this file there should be a line like this: multi(0)disk(0)rdisk(0)partition(1)WINDOWS="Microsoft Windows XP Professional" /fastdetect just add the /3G flag at the end, like: multi(0)disk(0)rdisk(0)partition(1)WINDOWS="Microsoft Windows XP Professional" /fastdetect /3G Now the file must be saved, and MS Windows restarted ----- Original Message ----- From: <... [GiDlist] Use 3 GB physical RAM on Windows XP
Send by: miguel Hello, Where it says '/3G' should be '/3GB', so the correct line would be: multi(0)disk(0)rdisk(0)partition(1)WINDOWS="Microsoft Windows XP Professional" /fastdetect /3GB Miguel Pasenau -- ---------------------------------------------------------------- Miguel Pasenau @: miguel at cimne.upc.edu Despacho C2, Edifico C1, Campus Norte UPC, c/ Gran Capitán s/n 08034 - Barcelona ( SPAIN) T: +34 3 93 401 74 03 F: +34 3 93 401 65 17 ---------------------------------------------------------------- IMPORTANT NOTICE All personal data contained in this mail will be processed confidentially and stored in a file property of CIMNE in order to manage corporate communications. You may exercise the right of access, rectification, deletion and objection by letter sent to CIMNE, Gran Capitán, Edificio C1 - Campus Norte UPC, 08034 Barcelona, Spain. -----Mensaje original----- De: ... [GiDlist] Use 3 GB physical RAM on Windows XP
Send by: miguel Pleas, look at the following page: http://www.gidhome.com/support_team/gid3gb/index.html -----Mensaje original----- De: gidlist-admin at gid.cimne.upc.edu [mailto:gidlist-admin at gid.cimne.upc.edu] En nombre de miguel Enviado el: martes, 31 de marzo de 2009 9:16 Para: gidlist at gid.cimne.upc.edu Asunto: RE: [GiDlist] Use 3 GB physical RAM on Windows XP Hello, Where it says '/3G' should be '/3GB', so the correct line would be: multi(0)disk(0)rdisk(0)partition(1)WINDOWS="Microsoft Windows XP Professional" /fastdetect /3GB Miguel Pasenau -- ---------------------------------------------------------------- Miguel Pasenau @: ... [GiDlist] Re: GiDlist digest, Vol 1 #1509 - 2 msgs
Send by: fsalazar at cimne.upc.edu I had already added the flag, but it doesn't use more than 2GB. > Send GiDlist mailing list submissions to > gidlist at gid.cimne.upc.edu > > To subscribe or unsubscribe via the World Wide Web, visit > http://gid.cimne.upc.es/mailman/listinfo/gidlist > or, via email, send a message with subject or body 'help' to > gidlist-request at gid.cimne.upc.edu... [GiDlist] Philipp Kauffmann/tf/wzl ist außer Haus.
Send by: P.Kauffmann at wzl.rwth-aachen.de Ich werde ab 28.03.2009 nicht im Büro sein. Ich kehre zurück am 20.04.2009. Ich werde Ihre Nachricht nach meiner Rückkehr beantworten. [GiDlist] NURBS render
Send by: Nunzio Losacco Hi everyone, I have a problem displaying some NURBS surfaces with render-->flat. Some surfaces simply don't get any color filling even if they appear as "normal" NURBS surfaces in render --> normal mode. Is this a known issue? Thanks a lot, N. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20090330/0dc974f0/attachment.htm [GiDlist] NURBS render
Send by: Enrique Escolano Hello, To show a surface in 'render mode' is necessary to create a "render mesh" (usually triangles). Sometimes this render mesh can't be created for some surfaces (usually closed surfaces or maybe bad defined ones) and then are not showed in render mode. Maybe your surface is well defined and the mesh generator is able to generate an analysis mesh but not a render mesh, then you don't need to worry about, but usually this kind of surfacer are also difficult to handle to generate the analysis mesh (maybe you need to manually split closed surfaces in two open parts, or replace some wrong surface) ----- Original Message ----- From: Nunzio Losacco To: ... [GiDlist] NURBS render
Send by: Nunzio Losacco Well, I'm not sure I understood properly. Anyway when drawing exactly the
same surface in GiD 9.0.2 rendering works perfectly.
I also tried software mode in GiD9.1.1b but this didn't help.
Thank you,
Nunzio.
2009/3/31 Enrique Escolano <escolano at cimne.upc.edu>
> Hello,
>
> To show a surface in 'render mode' is necessary to create a "render mesh"
> (usually triangles).
> Sometimes this render mesh can't be created for some surfaces (usually
> closed surfaces or maybe bad defined ones) and then are not showed in render
...
[GiDlist] NURBS render
Send by: Enrique Escolano The surface that is not drawn in render mode is not related to any graphic card problem (is not necessary set OpenGL by software) Maybe with GiD 9.0.2 you were using another render precision that with 9.1.1b Preferences - Graphical - Surface precision (Render) a higher precision value means a finer render mesh Or maybe simple there is some small change between 9.0.2 and 9.1.1b that does that this surface is not render properly Usually the most important is that this surface is able to be meshed for the anaylisis mesh (this analysis mesher try harder methods than the render mesher) Send us a zip with your model to have a look. Enrique ----- Original Message ----- From: Nunzio Losacco To: ... [GiDlist] NURBS render
Send by: Nunzio Losacco Thanks for your interest. My analysis meshes are created normally so this is not a crucial problem. It's just a bit annoying when, for instance, I want to quickly select the outer surfaces of a complex model. In the attached file you will find the kind of surfaces that give me problems. The left surface is correctly rendered and it has been created with GiD 9.0.2. The right surface is basically the same thing, but created with GiD9.1.1b and is not rendered. I checked the Preference--> Graphical options and I have exactly the same (default) settings in both versions of the program. Thanks again, Nunzio. 2009/4/2 Enrique Escolano <escolano at cimne.upc.edu... [GiDlist] NURBS render
Send by: Enrique Escolano If you change the value of Surface render precision it will force to create again the render mesh, then this surface ir rendered without problems. ----- Original Message ----- From: Nunzio Losacco To: gidlist at gid.cimne.upc.edu Sent: Thursday, April 02, 2009 3:59 PM Subject: Re: [GiDlist] NURBS render Thanks for your interest. My analysis meshes are created normally so this is not a crucial problem. It's just a bit annoying when, for instance, I want to quickly select the outer surfaces of a complex model. In the attached file you will find the kind of surfaces that give me problems. The left surface is correctly rendered and it has been created with GiD 9.0.2. The right surface is basically the same thing, but created with GiD9.1.1b and is not rendered. I checked the Preference--> Graphical options and I have exactly the same (default) settings in both versions of the program. Thanks again, Nunzio. 2009/4/2 Enrique Escolano <... [GiDlist] NURBS render
Send by: Nunzio Losacco Er... what should I do, increase or decrease surface render precision? Which value did you use? Should I restart GiD then? 2009/4/2 Enrique Escolano <escolano at cimne.upc.edu> > If you change the value of Surface render precision it will force to > create again the render mesh, > then this surface ir rendered without problems. > > > ----- Original Message ----- > *From:* Nunzio Losacco <nunzio.losacco at gmail.com> >... [GiDlist] NURBS render
Send by: Adrià Melendo You only need to change the value and click accept, then you can also change it again to the initial value and click accept. Changing the value force GiD to recalculate all render meshes. Adrià, _____ AVISO IMPORTANTE Los datos de carácter personal facilitados están registrados en un fichero con la finalidad de facilitar la gestión de las comunicaciones de CIMNE. Puede ejercitar los derechos de acceso, rectificación, cancelación y oposición mediante petición dirigiéndose a nuestras oficinas en Ed. C1 Campus Norte UPC. Gran Capitán s/n Barcelona AVIS IMPORTANT Les dades de caràcter personal facilitades seran registrades en un fitxer amb la finalitat de facilitar les gestions de les comunicacions de CIMNE. Pot exercir els drets d'accés, rectificació i cancel·lació, per escrit a les nostres oficines en Ed. C1 Campus Nord UPC. Gran Capità s/n Barcelona. IMPORTANT NOTICE All personal data contained on this mail will be processed confidentially and registered in a file property of CIMNE., in order to manage corporate communications. You may exercise the rights of access, rectification, erasure and object by letter sent to Ed. C1 Campus Norte UPC. Gran Capitán s/n Barcelona. _____ De: ... [GiDlist] NURBS render
Send by: Nunzio Losacco It still doesn't work, I'm giving up. It's a bit annoying, I will wait until "it gets fixed by itself". ;) thank you, N. 2009/4/3 Adrià Melendo <amelendo at cimne.upc.edu> > You only need to change the value and click accept, then you can also > change it again to the initial value and click accept. Changing the value > force GiD to recalculate all render meshes. > Adrià, > -------------- next part -------------- An HTML attachment was scrubbed... URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20090403/ff189a51/attachment.htm... [GiDlist] NURBS render
Send by: Enrique Escolano I don't know why this surface can't be rendered with your GiD. I'm also trying with GiD9.1.1b (Windows x32) and it's rendered with all possible values of the render surface precision. (I attach the model) Enrique ----- Original Message ----- From: Nunzio Losacco To: gidlist at gid.cimne.upc.edu Sent: Friday, April 03, 2009 10:45 AM Subject: Re: [GiDlist] NURBS render It still doesn't work, I'm giving up. It's a bit annoying, I will wait until "it gets fixed by itself". ;) thank you, N. 2009/4/3 Adrià Melendo <... [GiDlist] Re: GiDlist digest, Vol 1 #1510 - 5 msgs
Send by: fsalazar at cimne.upc.edu Now it works. Thank you > Send GiDlist mailing list submissions to > gidlist at gid.cimne.upc.edu > > To subscribe or unsubscribe via the World Wide Web, visit > http://gid.cimne.upc.es/mailman/listinfo/gidlist > or, via email, send a message with subject or body 'help' to > gidlist-request at gid.cimne.upc.edu > > You can reach the person managing the list at ... [GiDlist] help:3d model with one soil layer
Send by: Charikleia Prassa Hi, I have a question regarding the generation of a 3d mesh with one soil layer. How can I create a 3d mesh without having to divide my mesh at least in two layers? Best regards, Chara Prassa -------------- next part -------------- An HTML attachment was scrubbed... URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20090331/2fb52fec/attachment.htm [GiDlist] help:3d model with one soil layer
Send by: Enrique Escolano I don't understand your question. I think that you are mixing the concept of "GiD layer", that aids to visually separate parts of a model, and your "soil layers" To create a 3d mesh (a volume mesh) you must create a geometric volume defined by its boundary surfaces. Your whole model can be in the same GiD layer if you want. Enrique ----- Original Message ----- From: Charikleia Prassa To: gidlist at gid.cimne.upc.edu Sent: Tuesday, March 31, 2009 11:56 PM Subject: [GiDlist] help:3d model with one soil layer Hi, I have a question regarding the generation of a 3d mesh with one soil layer. How can I create a 3d mesh without having to divide my mesh at least in two layers? Best regards, Chara Prassa -------------- next part -------------- An HTML attachment was scrubbed... URL: ... [GiDlist] Plot to eps - hidden lines are not invisible in plot
Send by: Manfred Ulz Hi, I am new to this mailing list and have a question regarding the "Print to File" image. In the postprocessor it is possible to do Files -> Print to file -> PS/EPS Vectorial -> EPS. So, to print out a vector graphics picture, which works basically very well. If I wanna create a fancy colourful picture with the element lines I have following problem. In the GUI of GiD it looks great. With "Display style" I can switch on or off the body lines and the hidden lines are always invisible. However, if I print this pic to an eps-file, the hidden lines are plotted as well. Is it possible somehow just to print the visible element lines to an eps-file? Thanks for any help, Manfred ... [GiDlist] Plot to eps - hidden lines are not invisible in plot
Send by: Manfred Ulz Hi, I am new to this mailing list and have a question regarding the "Print to File" image. In the postprocessor it is possible to do Files -> Print to file -> PS/EPS Vectorial -> EPS. So, to print out a vector graphics picture, which works basically very well. If I wanna create a fancy colourful picture with the element lines I have following problem. In the GUI of GiD it looks great. With "Display style" I can switch on or off the body lines and the hidden lines are always invisible. However, if I print this pic to an eps-file, the hidden lines are plotted as well. Is it possible somehow just to print the visible element lines to an eps-file? Thanks for any help, Manfred ... [GiDlist] Plot to eps - hidden lines are not invisible in plot
Send by: miguel Hello, I found the problem: this only happens after the first creation of the vectorial PS file. And it will be solved for the next version of GiD. Until then, when you want to create a 'ps vectorial' with hidden lines you can start gid, select the display style you want and create de vectorial PostScript. If you want further pictures, you'll need to quit GiD and start it again. Miguel Pasenau -- ---------------------------------------------------------------- Miguel Pasenau @: miguel at cimne.upc.edu Despacho C2, Edifico C1, Campus Norte UPC, c/ Gran Capitán s/n 08034 - Barcelona ( SPAIN) T: +34 3 93 401 74 03 F: +34 3 93 401 65 17 ---------------------------------------------------------------- IMPORTANT NOTICE All personal data contained in this mail will be processed confidentially and stored in a file property of CIMNE in order to manage corporate communications. You may exercise the right of access, rectification, deletion and objection by letter sent to CIMNE, Gran Capitán, Edificio C1 - Campus Norte UPC, 08034 Barcelona, Spain. -----Mensaje original----- De: ... [GiDlist] multiple line graphs - multiple cuts
Send by: Nunzio Losacco hi, 1) is it possible to apply the same selection to display the same line graph for different analysis steps all at once? I mean is there a way quicker then open multiple postprocess files --> line graph --> selection --> change analysis step --> line graph --> (same) selection ---> and so on... ? 2) don't know if this is a bug or I miss something. When I open multiple (many!!!) postprocess files all at once, whenever I try "do cut" or "divide by volume sets" after selection I have a large number of Dialog windows opening asking if I want to do a cut for current analysis step only or for all of them. Is thet normal? Thank you for your help, Nunzio. -------------- next part -------------- An HTML attachment was scrubbed... URL: ... [GiDlist] multiple line graphs - multiple cuts
Send by: miguel Hello, 1) No, there is no other possibility. We can think about it and add this possibility in a future version. 2) in multiple files, when you do a cut, GiD asks you if the cut should be done only for the viewed mesh or for all loaded meshes. The question is done whenever the user wants to do a new cut. This was thought for the case when a lot of meshes were loaded and the user wanted to cut just a couple of them (saving so some memory). Yes, we can change this behaviour and turn it into a preference rather than a pop-up window for each cut. Thanks for your suggestions, Miguel Pasenau -- ---------------------------------------------------------------- Miguel Pasenau @: ... [GiDlist] Help:How to set a beam element in GID
Send by: Charikleia Prassa Dear Mr./Mrs. My name is Chara and I am a student at UC Davis. I am currently working with the GID program on a retaining wall problem. I have a 3D model 8x3x1 that represents the retained soil. What I want is to set beam element on one site that will represent the wall. My question is how can I set this beam element in GID. Regards, Chara -------------- next part -------------- An HTML attachment was scrubbed... URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20090406/6194b102/attachment.htm ... [GiDlist] Help:How to set a beam element in GID
Send by: Enrique Escolano GiD itself doesn't includes any simulation code. It is a neutral pre/postprocessor that could be adapted to different simulation programs. GiD can generate line elements, surface elements (triangles or quadrilaterals). and volume elements (tetrahedra, hexahedra, prisms) but how are they used for the analysis depends on the external simulation code. Do you know the 'problemtype' that you are going to use for your analysis? Wich kind of analysis to you want? if do you want to analize the wall probably a linear elastic structural analysis is enougth, but if do you want to analize the soil probably you need a more specialized geotechnical code And you can use more than one simplified model to represent you physics. You must to select how to do the FEM representation: - a 2D plane strain model - a 3D model with solid elements - a 3D model mixing solid, shells, beams You can donwnload "RamSeries" to do elastic structural analysis (from the GiD menu Data->Problemtype->Internet retrieve). Once your problemtype is installed your can load it in GiD with Data->Problemtype->RamSeries... Read the problemtype help to learn how to use it Regards Enrique Escolano ----- Original Message ----- From: Charikleia Prassa To: ... [GiDlist] Wrong minimum Assembling_Type given
Send by: Jaime Saelices Hi all, I am using the Tdyn 5.9 problemtype and GiD 9.1.0R2. When I launch the calculation of a problem (no matter what kind of problem i`m running the error also occurs) the following error is reported: Wrong minimum Assembling_Type given I know that the values for Fluid_Assembling_Type and Solid_Assembling_Type are hardcoded in problemtype.prb file but the default value is 0. What is then the problem? Thanks in advance. -- Jaime Saelices -------------- next part -------------- An HTML attachment was scrubbed... URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20090406/06c7291d/attachment.htm... [GiDlist] Wrong minimum Assembling_Type given
Send by: Enrique Escolano Hello Jaime, This message is raised by Tdyn, not by GiD, then we don't know its meaning. You must ask this question to Compass people (the developers of Tdyn) at info at compassis.com Regards Enrique Escolano ----- Original Message ----- From: Jaime Saelices To: gidlist at gid.cimne.upc.edu Sent: Monday, April 06, 2009 8:42 PM Subject: [GiDlist] Wrong minimum Assembling_Type given Hi all, I am using the Tdyn 5.9 problemtype and GiD 9.1.0R2. When I launch the calculation of a problem (no matter what kind of problem i`m running the error also occurs) the following error is reported: Wrong minimum Assembling_Type given I know that the values for Fluid_Assembling_Type and Solid_Assembling_Type are hardcoded in problemtype.prb file but the default value is 0. What is then the problem? Thanks in advance. -- Jaime Saelices -------------- next part -------------- An HTML attachment was scrubbed... URL: ... [GiDlist] problem with unix.bat
Send by: Georg Haasemann Hello, I'm using GiD 9.1.1b on Linux. For my problemtype, I have the file name.unix.bat. Running "Calculate" will do everything as given in this file except the execution of my external program. For this execution, the code in name.unix.bat is something like cd PATH_to_PROG ./prog_name Using GiD version 9.0.2 with the same problemtype, this problem does not occur. Is that a bug in 9.1.1b ? Regards, Georg [GiDlist] problem with unix.bat
Send by: Enrique Escolano Wich Linux shell is using your unix.bat file? csh , bash, ... Are you sure that this shell is installed in your system (e.g. I think that the bash shell is not installed by default in last Ubuntu distributions) ? And off course check that the .unix.bat has execution flag (chmod +x) If you continue with problems to start the execution of the external program send us your unix.bat file zipped to have a look. (could send directly to escolano at cimne.upc.edu instead the gidlist e-mail) Regards Enrique Escolano ----- Original Message ----- From: "Georg Haasemann" <... [GiDlist] Book option over Interval Data
Send by: Cristian Nieto Gamboa Greetings GiD Experts I am new using GiD and I am trying to explore the possibility of using GiD as Pre-Post for the F.E. solver GEFDyn developped at the MSSMat Laboratory at Ecole Centrale Paris. I have begun by writting the *.bas files in order to obtain the text files needed to use GEFDyn. By exploring the options I tryed to use the BOOK option over the Interval Data, in screen it goes well, I'm able to assign different intervals according to my needs. But then a problem appears when I try to use the *loop over Invervals, an error appears because there are different curves with the same number, and it is so because each book re-starts a new number sequence for the intervals data. Then, the question is: is there an option, that obviously I am not including, to precise over which book the loop should be done on the *.bas file?. or It is not possible and I have to use a script TCL? For information I am using the 1 month license for V 9.0.4 Thanks Cristian NIETO PhD Student Laboratoire de Mécanique de Sols, Structures et Materiaux - LMSSMat Ecole Centrale Paris Research Engineer Coyne et Bellier. Bureau d'ingénieurs Conseils Paris - France ... [GiDlist] Slow File IO in GiD 9
Send by: Martin.Meiler Hi GiD-Team, i have a question concerning GiD 9.1.1b on openSuSE 11.0 X86_64. The last version of GiD i had in use was GiD 8.1.8b. Now it turns out, that file output is much slower in GiD 9.1.1b than it has been in GiD 8.1.8b. I am writing mesh data in an ascii file. The file content for a 140000 element data file is written in 7 seconds in GiD 8.1.8b compared to 126 seconds in GiD 9.1.1b. Are there any known bugs concerning either GiD 9.1.1b or Tcl 8.5 concerning the performance of data io? Best regards Martin -- -------------------------------- SIMetris GmbH Dipl.-Ing. Martin Meiler Am Weichselgarten 7 D - 91058 Erlangen-Tennenlohe Tel.: +49 (0)9131 691 280 Fax.: +49 (0)9131 691 285 Email: ... [GiDlist] Slow File IO in GiD 9
Send by: Enrique Escolano Hello Martin, After a long time stopped, the gidlist is working again!! We didn't know this new necklace. How are you writting the ascii file? Using Files->Export->GiD mesh...? using some .bas template? Could you send me an example (including the problemtype if necessary)? Enrique Escolano > ----- Original Message ----- > From: "Martin.Meiler" <Martin.Meiler at simetris.de> > To: <gidlist at gatxan.cimne.upc.edu> > Sent: Tuesday, May 26, 2009 2:44 PM ... [GiDlist] Slow File IO in GiD 9
Send by: Martin.Meiler Hello Enrique,
i had a deeper look at where the problem arrises and it pointed me to
the GiD get function
GiD_Info Mesh Elements Any $i
I use this function to obtain information about the element
connectivity. If there is any faster alternative please let me know.
Just use this code fragment to show the performance difference in i.e.
tkcon attached to GiDs Tcl interpreter.
time {
for { set i 1 } { $i <= [GiD_Info mesh NumElements] } {incr i} {
set tst "$i [lrange [GiD_Info Mesh Elements Any $i] 1 end-1]"
}
}
Doing this i obtain the following runtimes:
GiD 8.1.8b: 3378240 microseconds per iteration
GiD 8.2.0b: 2667743 microseconds per iteration
GiD 9.1.1b: 121556265 microseconds per iteration
The problem does not stem from the change from Tcl 8.4 to Tcl 8.5 since
the results are still ok for GiD 8.1.8b and GiD 8.2.0b.
Did you change something concerning this get function in the GiD 9 release?
Thanks for your help.
Best regards
Martin
P.S.: Please note that your sender as well as the reply to email address
is completely wrong in all Gidlist mails.
...
[GiDlist] Slow File IO in GiD 9
Send by: Martin.Meiler Hello Enrique, i forgot to mention that the mentioned tests where executed using a 140000 element modell. Best regards Martin Martin.Meiler wrote: > Hello Enrique, > > i had a deeper look at where the problem arrises and it pointed me to > the GiD get function > > GiD_Info Mesh Elements Any $i > > I use this function to obtain information about the element > connectivity. If there is any faster alternative please let me know. > > Just use this code fragment to show the performance difference in i.e. > tkcon attached to GiDs Tcl interpreter. ... [GiDlist] Slow File IO in GiD 9
Send by: Enrique Escolano Hello Martin,
You are right, the version 9.1.1b is much slower than previous versions when asking elements information with GiD_Info Mesh Elements !!
We fixed this bottleneck for the next 9.2.1b beta version
In fact it is slower only when asking elements one by one a lot of times, but not asking once the whole list
I recommend you this alternative procedure:
foreach item [GiD_Info Mesh Elements Any -sublist] {
set tst [lrange $item 0 end-1]
}
The result of my tests (a model with about 145.000 linear tetrahedra) are:
With your procedure:
GiD 8.2.0b: 3.101.202 microseconds per iteration
GiD 9.1.1b: 169.660.435 microseconds per iteration (too expensive!!!)
Next 9.2.0b: 997.718 microseconds per iteration (bottleneck fixed)
With my alternative procedure:
GiD 8.2.0b: 380.997 microseconds per iteration
GiD 9.1.1b: 376.433 microseconds per iteration
Next 9.2.0b 377.151 microseconds per iteration
Regards
Enrique
----- Original Message -----
From: "Martin.Meiler" <...
[GiDlist] Question about postprocess mesh format
Send by: Claudio AC Silva Hello, I have a question about the postprocess mesh format: - the 'node number' in the coordinates section *must* be sequential and in increasing order? that is, Coordinates # node number coordinate_x coordinate_y coordinate_z 1 -5 3 -3 2 -5 3 0 3 -5 0 0 4 -2 2 0 end coordinates or could be Coordinates # node number coordinate_x coordinate_y coordinate_z 10 -5 3 -3 2 -5 3 0 13 -5 0 0 4 -2 2 0 end coordinates -- ________________________________________________________ Claudio Alessandro de Carvalho Silva, Dr. Eng. (#329333) CAE Solutions Thorus Scisoft - www.thorus-scisoft.com.br Fone:+55 019 3705-4002 ________________________________________________________ This message is intended solely for the use of its addressee and may contain privileged or confidential information. If you are not the addressee you should not distribute, copy or file this message. In this case, please notify the sender and destroy its contents immediately. Esta mensagem é para uso exclusivo de seu destinatário e pode conter informações privilegiadas e confidenciais. Se você não é o destinatário não deve distribuir, copiar ou arquivar a mensagem. Neste caso, por favor, notifique o remetente da mesma e destrua imediatamente a mensagem. ... [GiDlist] Question about postprocess mesh format: element numbers
Send by: Claudio AC Silva Hello, I have another question about the postprocess mesh format: - the 'element number' in the elements section *must* be sequential and in increasing order in each mesh? What about jumps in the sequence? Claudio -- ________________________________________________________ Claudio Alessandro de Carvalho Silva, Dr. Eng. (#329333) CAE Solutions Thorus Scisoft - www.thorus-scisoft.com.br Fone:+55 019 3705-4002 ________________________________________________________ This message is intended solely for the use of its addressee and may contain privileged or confidential information. If you are not the addressee you should not distribute, copy or file this message. In this case, please notify the sender and destroy its contents immediately. Esta mensagem é para uso exclusivo de seu destinatário e pode conter informações privilegiadas e confidenciais. Se você não é o destinatário não deve distribuir, copiar ou arquivar a mensagem. Neste caso, por favor, notifique o remetente da mesma e destrua imediatamente a mensagem. ... [GiDlist] Limitations when postprocessing results at Gauss points
Send by: Claudio AC Silva Hello, At some points of the User Manual, its is mentioned "limitations" when post-processing results placed at Gauss points. What are exactly those limitations? Best regards. Cláudio _____________________________________________________ Claudio Alessandro de Carvalho Silva, Dr. Eng. (#329333) CAE Solutions Thorus Scisoft - www.thorus-scisoft.com.br Fone:+55 019 3287-7060 r:251, FAX: +55 019 3287-7150 _____________________________________________________ This message is intended solely for the use of its addressee and may contain privileged or confidential information. If you are not the addressee you should not distribute, copy or file this message. In this case, please notify the sender and destroy its contents immediately. Esta mensagem é para uso exclusivo de seu destinatário e pode conter informações privilegiadas e confidenciais. Se você não é o destinatário, não deve distribuir, copiar ou arquivar a mensagem. Neste caso, por favor, notifique o remetente da mesma e destrua imediatamente a mensagem. ... [GiDlist] Limitations when postprocessing results at Gauss points
Send by: miguel Hi, By now, With GP you can do: - c.fill, smooth c.fill, c.lines, display vectors, show min max, isosurfaces, With GP you can not do: - deform mehs, result surface extrusion, any graphs And when a cut is done of the original mesh, GP are not trespassed from the original mesh to the cut. Best regards, Miguel Pasenau -- ---------------------------------------------------------------- Miguel Pasenau @: miguel at cimne.upc.edu Despacho C2, Edifico C1, Campus Norte UPC, c/ Gran Capitán s/n 08034 - Barcelona ( SPAIN) T: +34 3 93 401 74 03 F: +34 3 93 401 65 17 ---------------------------------------------------------------- IMPORTANT NOTICE All personal data contained in this mail will be processed confidentially and stored in a file property of CIMNE in order to manage corporate communications. You may exercise the right of access, rectification, deletion and objection by letter sent to CIMNE, Gran Capitán, Edificio C1 - Campus Norte UPC, 08034 Barcelona, Spain. -----Mensaje original----- De: ... [GiDlist] Limitations when postprocessing results at Gauss points
Send by: Claudio AC Silva Thank you Miguel. Cláudio > Hi, > By now, > > With GP you can do: > - c.fill, smooth c.fill, c.lines, display vectors, show min max, > isosurfaces, > > With GP you can not do: > - deform mehs, result surface extrusion, any graphs > > And when a cut is done of the original mesh, GP are not trespassed from the > original mesh to the cut. > > Best regards, > > Miguel Pasenau > > -- > ---------------------------------------------------------------- >... [GiDlist] Limitations when postprocessing results at Gauss points
Send by: miguel Hi, By now, With GP you can do: - c.fill, smooth c.fill, c.lines, display vectors, show min max, isosurfaces, With GP you can not do: - deform mehs, result surface extrusion, any graphs And when a cut is done of the original mesh, GP are not trespassed from the original mesh to the cut. Best regards, Miguel Pasenau -- ---------------------------------------------------------------- Miguel Pasenau @: miguel at cimne.upc.edu Despacho C2, Edifico C1, Campus Norte UPC, c/ Gran Capitán s/n 08034 - Barcelona ( SPAIN) T: +34 3 93 401 74 03 F: +34 3 93 401 65 17 ---------------------------------------------------------------- IMPORTANT NOTICE All personal data contained in this mail will be processed confidentially and stored in a file property of CIMNE in order to manage corporate communications. You may exercise the right of access, rectification, deletion and objection by letter sent to CIMNE, Gran Capitán, Edificio C1 - Campus Norte UPC, 08034 Barcelona, Spain. -----Mensaje original----- De: ... Fw: [GiDlist] Question about postprocess mesh format: element numbers
Send by: Enrique Escolano It is valid to have non sequential numeration for nodes/elements and also jumps (unused numbers) The only think you must be careful is avoid to use very big numbers, because with the current implementation a consecutive vector with the maximum number is allocated, and you can waste a lot of memory !! Regards Enrique Escolano > ----- Original Message ----- > From: "Claudio AC Silva" <cacs at thorus-scisoft.com.br> > To: <gidlist at gatxan.cimne.upc.edu> ... Fw: [GiDlist] Question about postprocess mesh format: element numbers
Send by: Claudio AC Silva I got the idea. Thank you, Enrico. > It is valid to have non sequential numeration for nodes/elements and also > jumps (unused numbers) > > The only think you must be careful is avoid to use very big numbers, because > with the current implementation > a consecutive vector with the maximum number is allocated, and you can waste > a lot of memory !! > > Regards > > Enrique Escolano > >> ----- Original Message ----- >> From: "Claudio AC Silva" <cacs at thorus-scisoft.com.br... [GiDlist] Question about postprocess mesh format: element numbers
Send by: miguel Yes, node and element numbers can be non sequential, but you must take care of following: - for node numbers, do not use a very big number, because, as Enrique sais, is allocates the whole vector for node_number_1 until biggest_node_number. - for both, nodes and elements, it is preferable to use unique numbers, i.e., do not use the same element number, for instance, for a triangle and a tetrahedron. Miguel Pasenau -- ---------------------------------------------------------------- Miguel Pasenau @: miguel at cimne.upc.edu Despacho C2, Edifico C1, Campus Norte UPC, c/ Gran Capitán s/n 08034 - Barcelona ( SPAIN) T: +34 3 93 401 74 03 F: +34 3 93 401 65 17 ---------------------------------------------------------------- IMPORTANT NOTICE All personal data contained in this mail will be processed confidentially and stored in a file property of CIMNE in order to manage corporate communications. You may exercise the right of access, rectification, deletion and objection by letter sent to CIMNE, Gran Capitán, Edificio C1 - Campus Norte UPC, 08034 Barcelona, Spain. -----Mensaje original----- De: ... [GiDlist] Simulaneous two GiD sessions
Send by: HEMMI, Shigeru Hello GiD team, I'm stil using GiD 8.0.2. Let me know how I can start up two GiD sessions simultaneously without interfering each other, e.g. foo.gid and goo.gid. My wish is to view some gid geometry in foo.gid as a reference and to work new model in another goo.gid window. Best regards, HEMMI, Shigeru ITOCHU Techno-Solutions Corporation (CTC) 2-5, Kasumigaseki 3-chome, Chiyoda-ku, Tokyo 100-6080, Japan [GiDlist] Simulaneous two GiD sessions
Send by: Enrique Escolano I don't understand what's the problem: You can start two GiDs with two different models without any interference not? Enrique ----- Original Message ----- From: "HEMMI, Shigeru" <shigeru.hemmi at ctc-g.co.jp> To: <gidlist at gatxan.cimne.upc.edu> Sent: Wednesday, June 03, 2009 9:40 AM Subject: [GiDlist] Simulaneous two GiD sessions > Hello GiD team, > > I'm stil using GiD 8.0.2. > > Let me know how I can start up two GiD sessions simultaneously ... [GiDlist] Simulaneous two GiD sessions
Send by: HEMMI, Shigeru Thanks for the quick reply. To be honest, sorry I did not test to start two GiD sessions yet. I know that GiD using the Temp directory, for example, c:/Documents and Settings/$(my user name)/Local Settings/Temp/gid2. If one GiD session locks some files in the Temp, I am guessing another GiD session will meet some difficulty. Not? Best regards, Enrique Escolano Wrote: > I don't understand what's the problem: > You can start two GiDs with two different models without any > interference not? > > Enrique > > ----- Original Message ----- From: "HEMMI, Shigeru" >... [GiDlist] Simulaneous two GiD sessions
Send by: Enrique Escolano You can start as many GiD as you want without interferences, they will use different temporary folders. The only interference is that the gid.ini user preferences are shared by all GiD's (GiD read this preferences file when starting, and save it when exit) Enrique ----- Original Message ----- From: "HEMMI, Shigeru" <shigeru.hemmi at ctc-g.co.jp> To: <gidlist at gatxan.cimne.upc.edu> Sent: Wednesday, June 03, 2009 11:39 AM Subject: Re: [GiDlist] Simulaneous two GiD sessions >... [GiDlist] Simulaneous two GiD sessions
Send by: HEMMI, Shigeru Dear Enrique Escolano, Thank you very much for the answer. I can proceed my work without worrying anything. Best regards, Enrique Escolano wrote: > You can start as many GiD as you want without interferences, they will > use different temporary folders. > > The only interference is that the gid.ini user preferences are shared by > all GiD's > (GiD read this preferences file when starting, and save it when exit) > > Enrique > ----- Original Message ----- From: "HEMMI, Shigeru" > <shigeru.hemmi at ctc-g.co.jp... [GiDlist] Gid 9.2b para Mac OSX
Send by: Jesus F Gracia Muchas felicidades por el lanzamiento de la versión beta de Gid para MacOSX, lo he estado probando y se vé bastante estable, mucho más en comparación con la versión 7.2 basada en X11.Aunque aún no me considero un usuario experto de GID como la mayoría que consulta por medio de este foro, pero si me creo capaz de poder encontrar bugs que sean propios de esta versión, los cuales trataré de hacérselos llegar a la brevedad posible.Enhorabuena muchachos! _________________________________________________________________ More than messages–check out the rest of the Windows Live™. ... [GiDlist] Gid 9.2b para Mac OSX
Send by: miguel Hello, As Jesus already said, we released a few days ago the first beta version of GiD for Mac OS X using Apple's Aqua interface. The previous X11 interface has been dropped out in favour of Mac OS X's native interface. This version is a x86 32bit one and was build on a Intel Mac-mini with Mac OS X 10.5.6 You can download it from our web site: (Download --> GiD beta versions --> Other Systems) <http://www.gidhome.com/download/do07.html> http://www.gidhome.com/download/do07.html (+Other Systems --> Mac OS X) Or directly from: <... [GiDlist] Mac OSX: Fail to update menus in postprocess
Send by: Jesus F Gracia This is a minor bug I found on post-processing vector data. When you try to draw any vector data (using contour fill, iso-lines, etc) the menu does not refresh it contents unless you click an area outside GID (i.e., desktop). But after the first attempt the menu does not refresh at all, so you need to exit post-process and reenter again. Included: Gid Problem Type (2d_Potential_Flow.gid.zip), Example with results (2dvalvle_2gid.zip) and a video showing this problem (GidBug01.m4v). Please also let me know if I can send large file to this email address for future bug report, or If you have a special repository. thank you _________________________________________________________________ Drag n’ drop—Get easy photo sharing with Windows Live™ Photos. ... [GiDlist] Mac OSX: Fail to update menus in postprocess
Send by: miguel Hello, Thanks for the report. I’m on it, but it seems that the solution is not trivial. Miguel Pasenau -- ---------------------------------------------------------------- Miguel Pasenau @: miguel at cimne.upc.edu Despacho C2, Edifico C1, Campus Norte UPC, c/ Gran Capitán s/n 08034 - Barcelona ( SPAIN) T: +34 3 93 401 74 03 F: +34 3 93 401 65 17 ---------------------------------------------------------------- IMPORTANT NOTICE All personal data contained in this mail will be processed confidentially and stored in a file property of CIMNE in order to manage corporate communications. You may exercise the right of access, rectification, deletion and objection by letter sent to CIMNE, Gran Capitán, Edificio C1 - Campus Norte UPC, 08034 Barcelona, Spain. _____ De: ... [GiDlist] Coordinates of pyramid vertices
Send by: Claudio AC Silva I would like to know the local coordinates of the vertices of the pyramid that is shown in the section "Postprocess results format: ProjectName.post.res" of the user manual. Only the coordinates of the internal Gauss points are shown there. I need to know those coordinates in order to transform the local coordinates of the Gauss points of my solver to the local coordinates used by GiD. The local coordinate system is not also shown, contrary to the other element shapes. Thank you in advance, Cláudio -- ________________________________________________________ Claudio Alessandro de Carvalho Silva, Dr. Eng. (#329333) CAE Solutions Thorus Scisoft - www.thorus-scisoft.com.br Fone:+55 019 3705-4002 ________________________________________________________ This message is intended solely for the use of its addressee and may contain privileged or confidential information. If you are not the addressee you should not distribute, copy or file this message. In this case, please notify the sender and destroy its contents immediately. Esta mensagem é para uso exclusivo de seu destinatário e pode conter informações privilegiadas e confidenciais. Se você não é o destinatário não deve distribuir, copiar ou arquivar a mensagem. Neste caso, por favor, notifique o remetente da mesma e destrua imediatamente a mensagem. ... [GiDlist] Coordinates of pyramid vertices
Send by: Enrique Escolano The local coordinates of the pyramid vertex are: -1 -1 -1 1 -1 -1 1 1 -1 -1 1 -1 0 0 1 ----- Original Message ----- From: "Claudio AC Silva" <cacs at thorus-scisoft.com.br> To: <gidlist at gatxan.cimne.upc.edu> Sent: Tuesday, June 09, 2009 5:17 PM Subject: [GiDlist] Coordinates of pyramid vertices >I would like to know the local coordinates of the vertices of the > pyramid that is shown in the section "Postprocess results format: > ProjectName.post.res" of the user manual. Only the coordinates of the ... [GiDlist] Nvidia and Gid8
Send by: Georg Haasemann Hello, I'm still using GiD8 (because we have not bought a license update, yet) with Debian 64bit. Is there any work around for this nvidia-problem? I get the black screen inside the GiD-window. The suggested solution doesn't work, because I could not find any gidx. Best Regards, Georg Haasemann -- Dr.-Ing. Georg Haasemann Technische Universität Dresden Fakultät Maschinenwesen Institut für Festkörpermechanik Tel.: +49 351 463-32656 Fax : +49 351 463-37061 Mail: Georg.Haasemann at tu-dresden.de [GiDlist] Nvidia and Gid8
Send by: Enrique Escolano When installing GiD in a Linux platform, there are created two start scripts: gid and gidx gid try to use the OpenGL hardware acceleration, and gidx use the mesa software implementation if you installed GiD 9.0.2 for example at /home/your_user/gid902 then instead to use /home/your_user/gid902/gid to avoid graphical problems you can try /home/your_user/gid902/gidx Which version of GiD are you using? Maybe your 8 version doesn't has this gidx script. Try the last 8.xb beta available version (8.2.0b) Regards Enrique Escolano ----- Original Message ----- From: "Georg Haasemann" <georg.haasemann at tu-dresden.de... [GiDlist] Nvidia and Gid8
Send by: Georg Haasemann > > Which version of GiD are you using? I'm using 8.0.7 and there is no gidx script. > > Maybe your 8 version doesn't has this gidx script. Try the last 8.xb beta > available version (8.2.0b) I will do it. Thanks, Georg -- Dr.-Ing. Georg Haasemann Technische Universität Dresden Fakultät Maschinenwesen Institut für Festkörpermechanik Tel.: +49 351 463-32656 Fax : +49 351 463-37061 Mail: Georg.Haasemann at tu-dresden.de [GiDlist] Nvidia and Gid8
Send by: Claudio AC Silva Enrique, Is this the only solution? The displays of gidx are worse than gid. Is there any kind of tunning to be done in linux-64bits to solve that? Thank you. Claudio Enrique Escolano wrote: > When installing GiD in a Linux platform, there are created two start > scripts: gid and gidx > gid try to use the OpenGL hardware acceleration, and gidx use the mesa > software implementation > > if you installed GiD 9.0.2 for example at /home/your_user/gid902 > then instead to use > /home/your_user/gid902/gid > > to avoid graphical problems you can try >... [GiDlist] Visualization of results on a non-homogeneus mesh
Send by: Claudio AC Silva I am trying to postprocess a mesh compounded by type of elements: hexaedra e prisms. According to the postprocess format, each group of elements should be placed in a different "mesh". In the same way, the results at Gauss Points (even related to the same field) should be placed in different sections of the .post.res file. However, when visualing the results, it would like to view the same field over the entire mesh but GiD considers the field over different elements to the different fields. How can I visualize a field defined at GPs of a non-homogeneus mesh at once? Thanks in advance, Cláudio -- ________________________________________________________ Claudio Alessandro de Carvalho Silva, Dr. Eng. (#329333) CAE Solutions Thorus Scisoft - www.thorus-scisoft.com.br Fone:+55 019 3705-4002 ________________________________________________________ This message is intended solely for the use of its addressee and may contain privileged or confidential information. If you are not the addressee you should not distribute, copy or file this message. In this case, please notify the sender and destroy its contents immediately. Esta mensagem é para uso exclusivo de seu destinatário e pode conter informações privilegiadas e confidenciais. Se você não é o destinatário não deve distribuir, copiar ou arquivar a mensagem. Neste caso, por favor, notifique o remetente da mesma e destrua imediatamente a mensagem. ... [GiDlist] Visualization of results on a non-homogeneus mesh
Send by: miguel Hi, You can use 'Windows-->Several results...' and activate 'One over another'. Now you can view both c.fill's: one for the GP on hexas and the second for the GP on prisms. Miguel Pasenau -- ---------------------------------------------------------------- Miguel Pasenau @: miguel at cimne.upc.edu Despacho C2, Edifico C1, Campus Norte UPC, c/ Gran Capitán s/n 08034 - Barcelona ( SPAIN) T: +34 3 93 401 74 03 F: +34 3 93 401 65 17 ---------------------------------------------------------------- IMPORTANT NOTICE All personal data contained in this mail will be processed confidentially and stored in a file property of CIMNE in order to manage corporate communications. You may exercise the right of access, rectification, deletion and objection by letter sent to CIMNE, Gran Capitán, Edificio C1 - Campus Norte UPC, 08034 Barcelona, Spain. -----Mensaje original----- De: ... [GiDlist] Visualization of high-order discontinuous results
Send by: Claudio AC Silva I am dealing with high-order discontinuous results and I am exporting them to Gauss points. However, GiD is only able to plot 'contour fill' of results if I used a limited number of Gauss points. In the case of hexaedra the maximum is 27 GPs. When I exceed this number, GiD plots small spheres at the Gauss points locations. Is it the expected behavior? Cláudio -- ________________________________________________________ Claudio Alessandro de Carvalho Silva, Dr. Eng. (#329333) CAE Solutions Thorus Scisoft - www.thorus-scisoft.com.br Fone:+55 019 3705-4002 ________________________________________________________ This message is intended solely for the use of its addressee and may contain privileged or confidential information. If you are not the addressee you should not distribute, copy or file this message. In this case, please notify the sender and destroy its contents immediately. Esta mensagem é para uso exclusivo de seu destinatário e pode conter informações privilegiadas e confidenciais. Se você não é o destinatário não deve distribuir, copiar ou arquivar a mensagem. Neste caso, por favor, notifique o remetente da mesma e destrua imediatamente a mensagem. ... [GiDlist] Visualization of high-order discontinuous results
Send by: miguel Ni, Yes, when GiD does not know how to extrapolate the results from the N GP to the nodes of the hexaedra, then it draws spheres on the GP with the coloured result. If you know how to do this, we can try to implement it. Thanks, Miguel Pasenau -- ---------------------------------------------------------------- Miguel Pasenau @: miguel at cimne.upc.edu Despacho C2, Edifico C1, Campus Norte UPC, c/ Gran Capitán s/n 08034 - Barcelona ( SPAIN) T: +34 3 93 401 74 03 F: +34 3 93 401 65 17 ---------------------------------------------------------------- IMPORTANT NOTICE All personal data contained in this mail will be processed confidentially and stored in a file property of CIMNE in order to manage corporate communications. You may exercise the right of access, rectification, deletion and objection by letter sent to CIMNE, Gran Capitán, Edificio C1 - Campus Norte UPC, 08034 Barcelona, Spain. -----Mensaje original----- De: ... [GiDlist] Visualization of high-order discontinuous results
Send by: Claudio AC Silva Miguel, As I do not know how this feature is implemented and the constraints or trade-offs you have to comply, please forgive me if I say something wrong (as we say in my country: if advices had any value, they would be sold, not given for free): a least squares method could be used? This way, the number of GPs would not be an issue (except for performance; remember the joke about advices above...). But what is really important for me, right know is knowing the GiD limitations in terms of number of GPs for extrapolating GP data to nodes for each element. Thanks, Cláudio miguel wrote: > Ni, > > Yes, when GiD does not know how to extrapolate the results from the N GP to ... [GiDlist] Visualization of high-order discontinuous results
Send by: miguel Hi Claudio, don't hesitate to ask questions. As the manual says, GiD tries to interpolate the gp results to the nodes of the elements, and if it can not do it, the gp-results are shown as spheres at the gauss points. By now, Gauss Points results which can be extrapolated to the nodes are: - 1 gp for all elements, - 8, 20 and 27 for hexaedras, - 6 and 15 for prisms, - 5 and 13 for pyramids, - 4 and 10 for tetrahedral, - 4 and 9 for cuadrilaterals, and - 3 and 6 for triangles. Best regards Miguel Pasenau -- ---------------------------------------------------------------- Miguel Pasenau @: miguel at cimne.upc.edu... [GiDlist] Line colour
Send by: Smith, Mark Hi Gid team I'm using GiD9.0.4 on winXP In my geometry creation I can assign lines to different layers, and I can choose the layer colours, is there a way of getting the lines to be drawn with their layer colour as this would make identifying the layer they belong to much easier? In preferences you can change the line colour but this is used for all lines irrespective of layer. Regards mark Please be advised that this email may contain confidential information. If you are not the intended recipient, please do not read, copy or re-transmit this email. If you have received this email in error, please notify us by email by replying to the sender and by telephone (call us collect at +1 202-828-0850) and delete this message and any attachments. Thank you in advance for your cooperation and assistance. In addition, Danaher and its subsidiaries disclaim that the content of this email constitutes an offer to enter into, or the acceptance of, any contract or agreement or any amendment thereto; provided that the foregoing disclaimer does not invalidate the binding effect of any digital or other electronic reproduction of a manual signature that is included in any attachment to this email. ... [GiDlist] Line colour
Send by: Adrià Melendo Hi Smith, To see the lines with their layer colour, you have to create a customized render, go to View->Render->Customize .There you will find all options you need, in each entity type you can choose between layer colour or entity colour(the colour that you chose on preference window). Adrià, ________________________________ AVISO IMPORTANTE Los datos de carácter personal facilitados están registrados en un fichero con la finalidad de facilitar la gestión de las comunicaciones de CIMNE. Puede ejercitar los derechos de acceso, rectificación, cancelación y oposición mediante petición dirigiéndose a nuestras oficinas en Ed. C1 Campus Norte UPC. Gran Capitán s/n Barcelona AVIS IMPORTANT Les dades de caràcter personal facilitades seran registrades en un fitxer amb la finalitat de facilitar les gestions de les comunicacions de CIMNE. Pot exercir els drets d'accés, rectificació i cancel·lació, per escrit a les nostres oficines en Ed. C1 Campus Nord UPC. Gran Capità s/n Barcelona. IMPORTANT NOTICE All personal data contained on this mail will be processed confidentially and registered in a file property of CIMNE., in order to manage corporate communications. You may exercise the rights of access, rectification, erasure and object by letter sent to Ed. C1 Campus Norte UPC. Gran Capitán s/n Barcelona. -----Mensaje original----- De: ... [GiDlist] NURBS render
Send by: Nunzio Losacco Hi everyone, sorry if I open this thread again. I just want to point out that my problem with NURBS rendering aren't solved yet. I'm using GiD 9.2.0b x86_64 on Linux Fedora 11 with NVIDIA 9200 M GS and the latest NVIDIA drivers (180.51) only 3 and 4 sided surfaces seem to be rendered properly. Anyone experiencing the same probles? thanks a lot, w. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20090623/a65a86f8/attachment.htm... [GiDlist] NURBS render
Send by: escolano at cimne.upc.edu Hello Nunzio, We have detected this problem (several simple surfaces, like a circle, are not rendered) and are working to solve it It seems that there is some problem of the Linux 64 bits GiD version, this problem doesn't happen with the 32 bits version or on Windows. Thanks for your bug report Regards Enrique Escolano On Tue 23/06/09 10:06 PM , Nunzio Losacco wrote: Hi everyone, sorry if I open this thread again. I just want to point out that my problem with NURBS rendering aren't solved yet. I'm using GiD 9.2.0b x86_64 on Linux Fedora 11 with NVIDIA 9200 M GS and the latest NVIDIA drivers (180.51) only 3 and 4 sided surfaces seem to be rendered properly. Anyone experiencing the same probles? thanks a lot, w. -------------- next part -------------- An HTML attachment was scrubbed... URL: ... [GiDlist] Exporting matrix information into binary files
Send by: Cesar Andres Polindara Lopez Hello to all. I'm looking forward to implement a finite element routine using PETSc and GiD. Nonetheless it appears that the easiest way to read a matrix is for PETSc to use a binary file. Now here's the thing, I've already worked with GiD and Matlab, all I did was to write the matrix connectivity, load vectors and alike into a single file used by Matlab. Now I want to write sepatare binary files for the grid, the load vector and any object I might need. ¿Does anyone know if GiD can do such a thing? Thanks in advance, César. _________________________________________________________________ Connect to the next generation of MSN Messenger ... [GiDlist] Exporting matrix information into binary files
Send by: Enrique Escolano You can write separated files creating multiple .bas templates, each template creates a .dat file (numbered by alphabetical template order) But with a .bas template you can only write ASCII files, not binary ones. You can run another external auxiliary program that read the ASCII file and create the binary (called automatically in the .bat file before the solver) or from the .bas template you can invoke a Tcl procedure that can open binary files and write the GiD information. Enrique Escolano ----- Original Message ----- From: Cesar Andres Polindara Lopez To: gidlist at gatxan.cimne.upc.edu... [GiDlist] NetCDF interface
Send by: Blottman, John B CIV NUWC NWPT Hello, Has anyone interfaced GiD postprocessing with NetCDF files? I am interested in maintaining our solver solutions written in NetCDF, but minimizing the intermediate steps of converting back to *.flavia.res for GiD to accept for postprocessing. Thanks, John John B. Blottman III, Ph.D Engineer Naval Undersea Warfare Center -------------- next part -------------- A non-text attachment was scrubbed... Name: smime.p7s Type: application/x-pkcs7-signature Size: 4970 bytes Desc: not available Url : http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20090626/ef31d7f4/attachment.bin... [GiDlist] NetCDF interface
Send by: miguel Hello, GiD does not read NetCDF files directly. It's in our agenda, but until now nobody asked for it. It's good to see that there is interest in this feature. We'll try to implement it for one of the beta versions. Thanks, Miguel Pasenau -- ---------------------------------------------------------------- Miguel Pasenau @: miguel at cimne.upc.edu Despacho C2, Edifico C1, Campus Norte UPC, c/ Gran Capitán s/n 08034 - Barcelona ( SPAIN) T: +34 3 93 401 74 03 F: +34 3 93 401 65 17 ---------------------------------------------------------------- IMPORTANT NOTICE All personal data contained in this mail will be processed confidentially and stored in a file property of CIMNE in order to manage corporate communications. You may exercise the right of access, rectification, deletion and objection by letter sent to CIMNE, Gran Capitán, Edificio C1 - Campus Norte UPC, 08034 Barcelona, Spain. -----Mensaje original----- De: ... [GiDlist] NetCDF interface
Send by: Enrique Escolano We are able to read in preprocess NetCDF files as a grid mesh, assuming that the file contain the variables "lon", "lat" for longitude, latitude and "topo" as the height. This case was used to import batimetric earth data. We have also compiled a tcl-netcdf library, to enable the use of NetCDF files from Tcl scripting. We are currently not reading NetCDF array data for postprocess, but we can do it for next versions if there are people interested in this feature. Regards Enrique Escolano ----- Original Message ----- From: "Blottman, John B CIV NUWC NWPT" <john.blottman at navy.mil... [GiDlist] How to get t / uv parameters for nodes on NURBS lines
Send by: Andreas Hauck Hello,
can I determine the parametric t value or the u,v values for mesh nodes
lying on NURBS lines / surfaces via the TCL interface?
My goal is to describe the curvature of element edges, which are lying
on a NURBS line, for the p-FEM method using the blending function
method, where I need a parametric representation of the element edge.
I also do not understand, for which geometric entities GiD uses NURBS
lines and for which it uses Arclines?
Thanks for the help.
Best regards,
Andreas
--
_/ _/_/ _/_/_/ Friedrich Alexander Universitaet Erlangen
_/ _/ _/ _/ Lehrstuhl fuer Sensorik
_/ _/ _/ Paul-Gordan-Str. 3-5, D-91052 Erlangen
_/ _/_/ _/_/_/
_/ _/ _/ Friedrich Alexander University Erlangen
_/ _/ _/ _/ Department of Sensor Technology
_/_/_/ _/_/ _/_/_/ Paul-Gordan-Str. 3-5, D-91052 Erlangen
M.Sc. Andreas Hauck
email.: ...
[GiDlist] How to get t / uv parameters for nodes on NURBS lines
Send by: Enrique Escolano You can use the command GiD_Info parametric (see GiD help) e.g. GiD_Info parametric line $linenum t_fromcoord $x $y $z GiD_Info parametric surface $surfacenum uv_fromcoord $x $y $z A problem will be that probably you don't know the number of the geometric entity source of the node, a trick is to apply on the geometric entity a condition with a #FUNC#(NumEntity) field, that automatically store the number of the geometric entity QUESTION: Surface_number#FUNC#(NumEntity) Arclines are created if the user select the arc tool. They can be converted to a NURBS expression if you want. (menu Geometry->Edit->Convert to NURBS->Line) Enrique ----- Original Message ----- From: "Andreas Hauck" <... [GiDlist] FW: Mac OSX: Fail to update menus in postprocess
Send by: Jesus F Gracia This is a minor bug I found on post-processing vector data. When you try to draw any vector data (using contour fill, iso-lines, etc) the menu does not refresh it contents unless you click an area outside GID (i.e., desktop). But after the first attempt the menu does not refresh at all, so you need to exit post-process and reenter again. Included: Gid Problem Type (2d_Potential_Flow.gid.zip), Example with results (2dvalvle_2gid.zip) and a video showing this problem (GidBug01.m4v). Please also let me know if I can send large file to this email address for future bug report, or If you have a special repository. thank you _________________________________________________________________ More than messages–check out the rest of the Windows Live™. ... [GiDlist] FW: Mac OSX: Fail to update menus in postprocess
Send by: miguel Hi, Thanks for the data. I tried to solve the problem related to the results menu actualizations. ¿Can you try the new beta available and tell me how it behaves? ftp://www.gidhome.com/pub/gid_adds/Other_Systems/MacOSX/GiD-9.2.2b-Install.d mg best regards Miguel Pasenau -- ---------------------------------------------------------------- Miguel Pasenau @: miguel at cimne.upc.edu Despacho C2, Edifico C1, Campus Norte UPC, c/ Gran Capitán s/n 08034 - Barcelona ( SPAIN) T: +34 3 93 401 74 03 F: +34 3 93 401 65 17 ---------------------------------------------------------------- IMPORTANT NOTICE All personal data contained in this mail will be processed confidentially and stored in a file property of CIMNE in order to manage corporate communications. You may exercise the right of access, rectification, deletion and objection by letter sent to CIMNE, Gran Capitán, Edificio C1 - Campus Norte UPC, 08034 Barcelona, Spain. _____ De: ... [GiDlist] FW: Mac OSX: Fail to update menus in postprocess
Send by: miguel Hi, Nice movie, which progam did you use to make it? Miguel Pasenau -- ---------------------------------------------------------------- Miguel Pasenau @: miguel at cimne.upc.edu Despacho C2, Edifico C1, Campus Norte UPC, c/ Gran Capitán s/n 08034 - Barcelona ( SPAIN) T: +34 3 93 401 74 03 F: +34 3 93 401 65 17 ---------------------------------------------------------------- IMPORTANT NOTICE All personal data contained in this mail will be processed confidentially and stored in a file property of CIMNE in order to manage corporate communications. You may exercise the right of access, rectification, deletion and objection by letter sent to CIMNE, Gran Capitán, Edificio C1 - Campus Norte UPC, 08034 Barcelona, Spain. _____ De: ... [GiDlist] Error in GiD_Info Mesh elements call
Send by: Martin.Meiler Hi GiD team, i am not really sure if this is really an error but somehow it is at least a strange behaviour of GiD. If i use GiD_Info Mesh elements Any 1 50000 -sublist GiD returns all element connectivity information of elements 1 trough 50000. In nearly all cases the information is returned with ascending element numbers. Therefore i did not implement an additional check for ascending element numbers when writing Mesh information for our finite element tool NACS. In only some cases the output of the function call returns a list where the element information is not stored in ascending order. Is it possible to return connectivity information always in ascending element order? Best regards Martin -- -------------------------------- SIMetris GmbH Dipl.-Ing. Martin Meiler Am Weichselgarten 7 D - 91058 Erlangen-Tennenlohe Tel.: +49 (0)9131 691 280 Fax.: +49 (0)9131 691 285 Email: ... [GiDlist] Error in GiD_Info Mesh elements call
Send by: Enrique Escolano Hello Martin, You are right, the result of this command look a bit strange. If the elements are of a single type, then the list is increasingly ordered, but if there are listed multiple types (e.g. triangles and quadrilaterals) they are ordered first by type, and inside the same type by increasing number You can force the increasing ordering you want with theTcl lsort standard command (ordering the items by the index 0) lsort -integer -index 0 [GiD_Info Mesh elements Any 1 end -sublist] Enrique ----- Original Message ----- From: "Martin.Meiler" <Martin.Meiler at simetris.de... [GiDlist] Error in GiD_Info Mesh elements call
Send by: Martin.Meiler Hello Enrique, ok i did not know about the ability of the alist command to sort by certain list indices. This makes things much easier. Thanks a lot. Best regards Martin P.S.: Please note that the lists reply-to address is still wrong. It is gidlist at gatxan.cimne.upc.edu.gid.cimne.upc.edu instead of gidlist at gatxan.cimne.upc.edu Enrique Escolano wrote: > Hello Martin, > > You are right, the result of this command look a bit strange. > >... [GiDlist] problem with meshing
Send by: Samir Omerovic Dear Gid Experts, I would like to know if it is possible to create a object (2D) with different types of mesh on the boundary and on the surface. For Example: A rectangle with a quadratic mesh (surface) and the boundary with a linear mesh.Best regards Samir Omerovic -------------- next part -------------- An HTML attachment was scrubbed... URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20090708/d3152020/attachment.htm [GiDlist] problem with meshing
Send by: Enrique Escolano No, nowadays the 'quadratic' is a global flag, then linear and quadratic elements can't be mixed ----- Original Message ----- From: Samir Omerovic To: gidlist at gatxan.cimne.upc.edu Sent: Wednesday, July 08, 2009 8:52 PM Subject: [GiDlist] problem with meshing Dear Gid Experts, I would like to know if it is possible to create a object (2D) with different types of mesh on the boundary and on the surface. For Example: A rectangle with a quadratic mesh (surface) and the boundary with a linear mesh. Best regards Samir Omerovic -------------- next part -------------- An HTML attachment was scrubbed... URL: ... [GiDlist] problem with mashing
Send by: Samir Omerovic Dear Gid team, thank you for the fast response, I would have one more question: Is it possible to create objects (again 2D) with a line mesh on the boundary and on the surface. My problem is I can create either the line mesh or the surface mesh but not both of them on one object. (And if possible, can you do a different subdivision of the 2 meshes? For example a coarse suface mesh and a fine line mesh?) best regards Samir Omerovic -------------- next part -------------- An HTML attachment was scrubbed... URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20090709/d7060a28/attachment.htm... [GiDlist] problem with mashing
Send by: Abel Coll Dear Samir,
To get the line mesh and the surface mesh, you have to set Mesh->Mesh
Criteria->Mesh->Lines and select the lines you want. The same happens if you
want to have a volume mesh and also the mesh of its boundary surfaces.
Doing this you will get both meshes, but they are conformal. If you want
diferent mesh sizes on lines and surfaces, you should duplicate the lines,
so as the duplicated line mesh will not own the surface one. In this case
both sizes are independent.
Kind regards,
ABEL
_________________________________
Abel Coll Sans - Civil Engineer
CIMNE - International Center for Numerical Methods in Engineering
Ofice c-2, C1 building - Campus Nord UPC
Gran Capità s/n, 08034 Barcelona
T: 34 - 93 401 74 03 Fax: 34 - 93 40 65 17
_____
AVISO IMPORTANTE
Los datos de carácter personal contenidos en el mensaje, se registrarán en
un fichero para facilitar la gestión de las comunicaciones de CIMNE. Se
pueden ejercitar los derechos de acceso, rectificación, cancelación y
oposición por escrito, dirigiéndose a nuestras oficinas de CIMNE, Gran
Capitán s/n, Edificio C1 - Campus Norte UPC, 08034 Barcelona, España.
AVÍS IMPORTANT
Les dades de caràcter personal contingudes en aquest missatge es registraran
en un fitxer per facilitar la gestió de les comunicacions del CIMNE. Es
poden exercir els drets d'accés, rectificació, cancel·lació i oposició, per
escrit a les nostres oficines del CIMNE, Gran Capità s/n, Edifici C1, Campus
Nord UPC, 08034 Barcelona, Espanya.
IMPORTANT NOTICE
All personal data contained in this mail will be processed confidentially
and stored in a file property of CIMNE in order to manage corporate
communications. You may exercise the right of access, rectification,
deletion and objection by letter sent to CIMNE, Gran Capitán, Edificio C1 -
Campus Norte UPC, 08034 Barcelona, Spain.
_____
_____
De: ...
[GiDlist] NURBS surface creation makes GiD crash
Send by: Nunzio Losacco Hi everyone, this is weird. Since last night, whenever I try to make a surface in GiD it closes unexpectedly. Reinstalling didn't solve the problem. I'm using GiD beta 9.2.0 64-bit on Linux. I've been using gid for a while and it never happened. Do you know anything about it? Thanks, N. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20090714/74f585a1/attachment.htm [GiDlist] NURBS surface creation makes GiD crash
Send by: Martin.Meiler Hi Nunizo, maybe renaming the file .gidDefaults to .gidDefaults_broken in your Home-Directory will solve this problem. GiD will generate a new file when you start GiD again. Maybe the GiD developers can find out what is going wrong if this solves your problem and you send the .gidDefaults_broken file to them. Best regards Martin Nunzio Losacco wrote: > Hi everyone, > > this is weird. Since last night, whenever I try to make a surface in GiD > it closes unexpectedly. Reinstalling didn't solve the problem. I'm using > GiD beta 9.2.0 64-bit on Linux. I've been using gid for a while and it ... [GiDlist] Volume subtraction crashes GiD
Send by: Nunzio Losacco Dear all, I'm working with GiD 9.2.0b 64-bit on Fedora 11 Linux. I've spent the whole day trying to punch a curved tunnel through a rectangular box. It only worked (sometimes) if I made a very small box compared to the tunnel length, but there seemed to be no rational way to make it work systematically. However now it is working smoothly as I switched to the same version but 32 bit. It still I just wanted to point out this odd behaviour (bug?) of 64-nit version. Moreover, even when using Gid 32 bit, I'm still experiencing the NURBS surface rendering issue I've mentioned in a previous post (see http://gid.cimne.upc.es/pipermail/gidlist/2009/004015.html... [GiDlist] Volume subtraction crashes GiD
Send by: Enrique Escolano It seems that there are some problems with the 9.2.0b 64 bits Linux version, maybe related to the use of some compiler optimizations. Please, could you send us the model with problems to create the tunnel on the box on Linux x64, to do some tests? Also the model whit rendering problems with x32 is interesting. (can send directly to escolano at cimne.upc.edu instead to the gidlist) Thanks for your bug reports Enrique Escolano ----- Original Message ----- From: Nunzio Losacco To: gidlist at gatxan.cimne.upc.edu... [GiDlist] Increase MAXPNTINNURB
Send by: Simone Marras Hi all, I am trying to import a batch file into GID but I obtain the following error: Error in SetGeom::CreateNURBLine. Increase MAXPNTINNURB how am I supposed to solve it? Thank you in advance, Best Simone -------------- next part -------------- A non-text attachment was scrubbed... Name: simone_marras.vcf Type: text/x-vcard Size: 323 bytes Desc: not available Url : http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20090722/776e7159/attachment.vcf [GiDlist] Increase MAXPNTINNURB
Send by: Enrique Escolano Now there is a limit of maximum 5000 points to be interpolated by a NURBS line. You can't change it. We will avoid this static limit for the next beta version (9.2.1b) In any case, are really necessary so many points to define a single curve? Try to reduce you number of interpolation points or interpolate piecewise with more that one curve. Regards Enrique Escolano ----- Original Message ----- From: "Simone Marras" <simone.marras at bsc.es> To: <gidlist at gatxan.cimne.upc.edu> Sent: Wednesday, July 22, 2009 10:35 AM Subject: [GiDlist] Increase MAXPNTINNURB >... [GiDlist] Increase MAXPNTINNURB
Send by: Simone Marras Thanks for replying. Unfortunately, for the type of definition that I am using for the particular curve I need a very high number of points. It's not typical but necessary in this application. Thank you; less than 5000 will do the job anyway Best Simone Enrique Escolano wrote: > Now there is a limit of maximum 5000 points to be interpolated by a > NURBS line. > You can't change it. > We will avoid this static limit for the next beta version (9.2.1b) > > In any case, are really necessary so many points to define a single curve? > Try to reduce you number of interpolation points or interpolate ... [GiDlist] Get information about the dimension of the model using tcl
Send by: Rodrigo Augusto Hi, Please, I want to know what is the tcl function that returns the dimension of the model. In the .bas file, there is a *ndime command that do this. Thanks -- Rodrigo Alves Augusto -------------- next part -------------- An HTML attachment was scrubbed... URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20090723/a8cdf77f/attachment.htm [GiDlist] Get information about the dimension of the model using tcl
Send by: Enrique Escolano This Tcl function not exists, You must check that the mesh nodes have z near zero, e.g. abs(z)<=1e-7 Instead to do an expensive loop over all nodes you can ask for the bounding box of the enties on all layers, with GiD_Info layers -bbox -use mesh ----- Original Message ----- From: Rodrigo Augusto To: gidlist at gatxan.cimne.upc.edu Sent: Thursday, July 23, 2009 8:05 PM Subject: [GiDlist] Get information about the dimension of the model using tcl Hi, Please, I want to know what is the tcl function that returns the dimension of the model. In the .bas file, there is a *ndime command that do this. Thanks -- Rodrigo Alves Augusto -------------- next part -------------- An HTML attachment was scrubbed... URL: ... [GiDlist] Divide volume sets - exact
Send by: Nunzio Losacco Hi everyone, I have a complex 3D mesh and I want to do some volume cuts to visually check if connectivity is right in the interior of the domain. I can do volume cuts normally (with the "2 points" option) but whenever I try to use the EXACT option in the contextual menu I got 0 elements created. Am I doing something wrong? Thanks for your help, as usual. Nunzio. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20090724/0d2fbb56/attachment.htm... [GiDlist] sweeping twist options
Send by: Nunzio Losacco Hi everyone, maybe I'm doing something wrong but I don't manage to make the twist options for sweeping work correctly. I've got a circular surface with normal in the XY plane and I want to sweep it along a spatial curve. How can I tell GiD to keep the normal vector in the same XY plane during sweeping? (changing the option in the "twist modes" menu apparently doesn't change anything). Thanks, Nunzio Lsoacco. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20090724/058ba99f/attachment.htm... [GiDlist] sweeping twist options
Send by: Enrique Escolano I think that you can do what you want unselecting the "Twist modes" checkbutton. Note: there is a limitation in the current implementation: the curve to be copied must not be closed: e.g. you must split the circumference curve in two parts to avoid this limit (Geometry->Edit->Divide->Line) Enrique Escolano ----- Original Message ----- From: Nunzio Losacco To: gidlist at gatxan.cimne.upc.edu Sent: Friday, July 24, 2009 2:52 PM Subject: [GiDlist] sweeping twist options Hi everyone, maybe I'm doing something wrong but I don't manage to make the twist options for sweeping work correctly. I've got a circular surface with normal in the XY plane and I want to sweep it along a spatial curve. How can I tell GiD to keep the normal vector in the same XY plane during sweeping? (changing the option in the "twist modes" menu apparently doesn't change anything). Thanks, Nunzio Lsoacco. -------------- next part -------------- An HTML attachment was scrubbed... URL: ... [GiDlist] sweeping twist options
Send by: Nunzio Losacco mmmm... I'm sorry but I do not agree. The behaviour is supposed to change if I choose different options in the "twist mode menu". Actually it does not. Moreover the "direction (x:, y:, z:)" field, which I suppose is made to be used in conjunction with the "user direction" option, is always grayed out! If I do what you say (i.e.: untick the "twist modes" checkbutton), then the figure I'm going to copy doesn't change its position wiht respect to the sweeping path at all, which is what I expect to happen (but not what I wish ;-) ) Would you check if the behaviour I signaled out is a bug? Thank you very much for your help, Nunzio. 2009/7/27 Enrique Escolano <... [GiDlist] What are the other options available by #FUNC# key
Send by: Rodrigo Augusto Hi, I would like to know about the other options availabe by #FUNC# key used in the condition file. Thanks -- Rodrigo Alves Augusto -------------- next part -------------- An HTML attachment was scrubbed... URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20090727/d1618f0a/attachment.htm [GiDlist] What are the other options available by #FUNC# key
Send by: Enrique Escolano Valid variables for a #FUNC# field are: NumEntity: to track the numerical id of the geometric source entity x y z : to use the coordinates of the node or entity center where the condition is applied Cond(num_field,REAL): to use the value of other fields of this condition (REAL or INT declare that must be considered as a real or a integer number) Valid mathematical operations are the same as the used for the *Operation template command. The valid C-functions that can be used are: +,-,*,/,%,(,),=,<,>,!,&,|, sin cos tan asin acos atan atan2 exp fabs abs pow sqrt log log10 max min ----- Original Message ----- From: Rodrigo Augusto To: ... [GiDlist] RE: FW: Mac OSX: Fail to update menus in postprocess (miguel)
Send by: Jesus F Gracia Hi MiguelSo far, It works fine for me!! One more question, are you or your GiD team familiarized with Kratos?I recently compiled kratos in macosx (I posted the instruction on Kratos wiki page)but even it compiled without errors I cannot make it works using python asa script interpreter. Maybe you guys can take a look.. Thank you! > Date: Wed, 5 Aug 2009 12:01:03 +0200 > From: gidlist-request at gatxan.cimne.upc.edu.gid.cimne.upc.edu > Subject: GiDlist digest, Vol 1 #1554 - 2 msgs > To: gidlist at gatxan.cimne.upc.edu... [GiDlist] RE: FW: Mac OSX: Fail to update menus in postprocess (miguel)
Send by: miguel Hi, I’m not working with Kratos, but i forward you to the persons in charge: Pooyan Dadwand and Riccardo Rossi (I think they are in holiday by now and until September). In Krato’s web page, you can find the people who are developing the platform/library/application under ‘community’ http://kratos.cimne.upc.es/kratoswiki/index.php/Who_are_we Perhaps they can help you. Best regards, Miguel Pasenau -- ---------------------------------------------------------------- Miguel Pasenau @: miguel at cimne.upc.edu... [GiDlist] Problems using command line switch -p and with openGL preselection
Send by: Martin.Meiler Hi GiD developers, we are faced with problems using GiD 9.2.2 . ------- --------- ------- Problem loading GiD with a preselected problemtype --------- ------- --------- In the past we have used the command line switch -p PROBLEMTYPE to start GiD with our problemtype like gid -p NACS In the new beta release this is not possible anymore and GiD starts with a dialog window saying The project is new. This indicates, that the last argument of the command line seems to be treated as project name. If i try to start a new GiD project with the problem type loaded like gid -p NACS test GiD tells Error: all flags must be before file name ------- --------- ------- Problems with new openGL selection dialog --------- ------- --------- Another point to the introduced initial dialog window that allows the user to select between software and hardware openGL rendering. These options are stored in the user preference file .gidDefaults as SoftwareOpenGL 1 OGL_configured 1 BUT in case that i use GiD at different machines it may occour, that one of them is capable of hardware OpenGL and another only supports SoftwareOpenGL. Therefore putting that option in the defaults file is not a very good option in my opinion. I first selected the wrong option and later on, when GiD did not start up, i had to search for the location of that setting. The method using openGL with the command gidx has been a better option. Best regards Martin -- -------------------------------- SIMetris GmbH Dipl.-Ing. Martin Meiler Am Weichselgarten 7 D - 91058 Erlangen-Tennenlohe Tel.: +49 (0)9131 691 280 Fax.: +49 (0)9131 691 285 Email: ... [GiDlist] Problems using command line switch -p and with openGL preselection
Send by: miguel Hello, * OpenGL selection: You can always reconfigure OpenGL this way: $ gid -openglconfig This way the initial configuration window will pop up allowing you to reconfigure OpenGL. I send you enclosed the 'gidx' script. Just copy it where gid 922 is installed and enable the execution permission ( chmod +x gidx). I'll include it in the installation of GiD. * Problem type selection The '-p problemType' seems to be a bug inside GiD itself, I'll solve it now. Keep you informed. Miguel Pasenau -- ---------------------------------------------------------------- Miguel Pasenau @: miguel at cimne.upc.edu... [GiDlist] Problems using command line switch -p and with openGL preselection
Send by: miguel Hello, I've uploaded gid9.2.3 for Linux which includes the 'gidx' script and the solution for the bug with the '-p problemType' switch. Now it loads the problem type. Miguel Pasenau -- ---------------------------------------------------------------- Miguel Pasenau @: miguel at cimne.upc.edu Despacho C2, Edifico C1, Campus Norte UPC, c/ Gran Capitán s/n 08034 - Barcelona ( SPAIN) T: +34 3 93 401 74 03 F: +34 3 93 401 65 17 ---------------------------------------------------------------- IMPORTANT NOTICE All personal data contained in this mail will be processed confidentially and stored in a file property of CIMNE in order to manage corporate communications. You may exercise the right of access, rectification, deletion and objection by letter sent to CIMNE, Gran Capitán, Edificio C1 - Campus Norte UPC, 08034 Barcelona, Spain. -----Mensaje original----- De: ... [GiDlist] Use of Files readMultiple
Send by: Blottman, John B CIV NUWC NWPT Hello, We are working with GiD version 9.2.0 on Linux to develop an implementation of the animate function that will manipulate our analysis data and generate a temporary flavia.res file. That file is then loaded into postprocessing using the command <GiD_Process files readMultiple>. This will read in the temporary file, but after reloading the original flavia.res, GiD will no longer recognize the files readMultiple command. The error message is <command not recognized -> files>. Manually entering the files readMultiple at the command line will return the same error. To restore GiD after this error, we must exit and re-enter post processing. We cannot find where the command <files> is defined, so we cannot determine if the problem is our interpretation, or a bug. Thanks, John John B. Blottman III, Ph.D Naval Undersea Warfare Center, Newport, RI 02841 USA ... [GiDlist] Use of Files readMultiple
Send by: Adrià Melendo I'm not sure but maybe this could help you, a right click over command line let you choose "Configure toolbars", and from the window you can insert the toolbar "Right Buttons". In this menu, you can see all the commands that GiD let you choose. It seems that for me is working "Files ReadMultiple", It's highly recommended to add "Mescape" (Multiple escape) at the beginning to be sure that GiD is in base menu, so I hope the following command work for you "Mescape Files ReadMultiple" Adrià ________________________________ AVISO IMPORTANTE Los datos de carácter personal facilitados están registrados en un fichero con la finalidad de facilitar la gestión de las comunicaciones de CIMNE. Puede ejercitar los derechos de acceso, rectificación, cancelación y oposición mediante petición dirigiéndose a nuestras oficinas en Ed. C1 Campus Norte UPC. Gran Capitán s/n Barcelona AVIS IMPORTANT Les dades de caràcter personal facilitades seran registrades en un fitxer amb la finalitat de facilitar les gestions de les comunicacions de CIMNE. Pot exercir els drets d'accés, rectificació i cancel·lació, per escrit a les nostres oficines en Ed. C1 Campus Nord UPC. Gran Capità s/n Barcelona. IMPORTANT NOTICE All personal data contained on this mail will be processed confidentially and registered in a file property of CIMNE., in order to manage corporate communications. You may exercise the rights of access, rectification, erasure and object by letter sent to Ed. C1 Campus Norte UPC. Gran Capitán s/n Barcelona. -----Mensaje original----- De: ... [GiDlist] Memory Bug in GiD 9.2.3?
Send by: Martin.Meiler Hi GiD-developers, i realized a strange behaviour of GiD during the last weekend. Our FEM-Tool NACS generated a binary result file with a file size of 662 MB. This file contains the modell (~ 800.000 elements, 1.000.000 nodes) as well as simulation results of an eigenfrequency analysis with mechanical displacements for 40 eigenfrequencies. I started GiD with software rendering, went to PostProcessing mode and opened the file. Then i selected contour fill -> mechDisplacement as well as the visualization of the deformed structure. At that time GiD requested 3.7 GB memory. Now i used the animate function to generate a pictures of each result. GiD finally requested 34 GB on our compute server with 32 GB and therefore terminated the machine. The question is why is GiD requesting more and more memory for each result step? Best regards Martin -- -------------------------------- SIMetris GmbH Dipl.-Ing. Martin Meiler Am Weichselgarten 7 D - 91058 Erlangen-Tennenlohe Tel.: +49 (0)9131 691 280 Fax.: +49 (0)9131 691 285 Email: ... [GiDlist] Memory Bug in GiD 9.2.3?
Send by: miguel Hello, GiD uses display lists, under some limitations, to show the visualization in postprocess. As your model is quite big, gid should not use this option. My guess is that, for some reason, it still uses this option. You can deactivate this option by setting the variable from the right menu 'Utilities-->Variables-->OGL_useMeshObjects' to '0'. Does it reduce the memory footprint of GiD? If not, can you send us the example o let it in a location, for instance www.yousendit.com, from where we can download it and check the problem? Thanks, Miguel Pasenau -- ---------------------------------------------------------------- Miguel Pasenau @: ... [GiDlist] How to generate volume mesh out of surface mesh
Send by: Hao Chen Dear all: I want to generate tetrahetron mesh of a cubic volume. Now, I have 3 surface triangle meshes of the cubic. Basing on these meshes, I want to generate volume mesh without changing these 3 facets' mesh. How can I realize it? Best regards. Chen Hao. _________________________________________________________________ With Windows Live, you can organize, edit, and share your photos. http://www.microsoft.com/middleeast/windows/windowslive/products/photo-gallery-edit.aspx -------------- next part -------------- An HTML attachment was scrubbed... URL: ... [GiDlist] How to generate volume mesh out of surface mesh
Send by: Abel Coll Dear Chen,
If you want to generate a volume mesh using GiD, you must be in one of these
two situations:
- topological closed set of surfaces. In this case, you can create the
volume (Geometry->Create->Volume) and generate the mesh (Mesh->Generate).
- a conformal mesh which close a volume (each edge have HigherEntity==2). In
this case, you can generate the volume mesh selecting
(Mesh->MeshFromBoundary), and selecting all the triangles closing the
volume. This option is only available from the Right Buttons (you can set
them by clicking 'Utilities->Tools->Toolbars').
If I have understood well, you are not in one of these cases, so you will
have to do some work to reach one of these situations.
Kind regards,
ABEL
_________________________________
Abel Coll Sans - Civil Engineer
CIMNE - International Center for Numerical Methods in Engineering
Ofice c-2, C1 building - Campus Nord UPC
Gran Capità s/n, 08034 Barcelona
T: 34 - 93 401 74 03 Fax: 34 - 93 40 65 17
_____
AVISO IMPORTANTE
Los datos de carácter personal contenidos en el mensaje, se registrarán en
un fichero para facilitar la gestión de las comunicaciones de CIMNE. Se
pueden ejercitar los derechos de acceso, rectificación, cancelación y
oposición por escrito, dirigiéndose a nuestras oficinas de CIMNE, Gran
Capitán s/n, Edificio C1 - Campus Norte UPC, 08034 Barcelona, España.
AVÍS IMPORTANT
Les dades de caràcter personal contingudes en aquest missatge es registraran
en un fitxer per facilitar la gestió de les comunicacions del CIMNE. Es
poden exercir els drets d'accés, rectificació, cancel·lació i oposició, per
escrit a les nostres oficines del CIMNE, Gran Capità s/n, Edifici C1, Campus
Nord UPC, 08034 Barcelona, Espanya.
IMPORTANT NOTICE
All personal data contained in this mail will be processed confidentially
and stored in a file property of CIMNE in order to manage corporate
communications. You may exercise the right of access, rectification,
deletion and objection by letter sent to CIMNE, Gran Capitán, Edificio C1 -
Campus Norte UPC, 08034 Barcelona, Spain.
_____
_____
De: ...
[GiDlist] Mac OSX: Assign conditions crash the application
Send by: Jesus F Gracia Hi:This is a very weird bug I found recently, because I was using this utility without any problems and suddenly start happening. I've tested in another machine with different configurations and the results are the same. I though it was something related to my own customized problem type but I use an example problem type (cmas2d) and the problem continues. I also try to reinstall GiD by deleting the application bundle from Applications and also ~/.gidDefaults and then run the installation package again... no luck :S I guess some recent system update cause a conflict with GiD :S -Open an existing GiD file or star a new one creating a Geometry and selecting a problem type.-Open the condition window, select any condition and push Assign button.-GiD Crashes!! I'm attaching the apple report for this particular crash. _________________________________________________________________ More than messages–check out the rest of the Windows Live™. ... [GiDlist] RE: Mac OSX: Assign conditions crash the application
Send by: Blottman, John B CIV NUWC NWPT Hi, I found the same problem. Note that this bug showed up in ver. 9.2.2, but was not in 9.2.0 John -----Original Message----- Message: 1 From: Jesus F Gracia <jfgracia at hotmail.com> To: <gidlist at gatxan.cimne.upc.edu>, <gidlist-admin at gatxan.cimne.upc.edu> Date: Thu, 27 Aug 2009 09:22:06 -0500 Subject: [GiDlist] Mac OSX: Assign conditions crash the application Reply-To: gidlist at gid.cimne.upc.edu... [GiDlist] Mac OSX: Some other minors bugs related menu contents refreshing
Send by: Jesus F Gracia These are not critical as the one that crashes GiD caused by applying conditions to a model, which I agree with John Blottmam that this problem is only present on version 9.2.2b Open a existing model causes stop refreshing Problem Type menu, to active it again it is necessary to invocate the open/save as window and click cancel. After selecting a base unit system in a Problem units windows, the combo menu freezes and there is not way to select another base system. It is necessary to close and reopen the Problem units window. If you post a new release fixing this bugs, it is possible to test it on Leopard Snow? Greetings! _________________________________________________________________ With Windows Live, you can organize, edit, and share your photos. ... [GiDlist] RE: Mac OSX: Some other minors bugs related menu contents refreshing
Send by: miguel Hello, I’ll try to reproduce the problems you mention, and keep you informed. Currently I’m developing the Mac version on Mac OS X 10.5.7 and didn’t plan to upgrade it to 10.6 as nobody I knew uses this latest release of Mac OS X. Do you have the Leopard Snow (10.6) on your Mac? Best regards, Miguel Pasenau -- ---------------------------------------------------------------- Miguel Pasenau @: miguel at cimne.upc.edu Despacho C2, Edifico C1, Campus Norte UPC, c/ Gran Capitán s/n 08034 - Barcelona ( SPAIN) T: +34 3 93 401 74 03 F: +34 3 93 401 65 17 ---------------------------------------------------------------- IMPORTANT NOTICE All personal data contained in this mail will be processed confidentially and stored in a file property of CIMNE in order to manage corporate communications. You may exercise the right of access, rectification, deletion and objection by letter sent to CIMNE, Gran Capitán, Edificio C1 - Campus Norte UPC, 08034 Barcelona, Spain. _____ De: ... [GiDlist] RE: Mac OSX: Some other minors bugs related menu contents refreshing
Send by: Jesus F Gracia Hi Miguel:I just a matter of time, it depends on DHL :DI think this week we will have it running, I let you know if I saw any problem in GiD Greetings From: miguel at cimne.upc.edu To: jfgracia at hotmail.com; gidlist-admin at gatxan.cimne.upc.edu; gidlist at gatxan.cimne.upc.edu Subject: RE: Mac OSX: Some other minors bugs related menu contents refreshing Date: Tue, 1 Sep 2009 10:20:42 +0200 Hello, I’ll try to reproduce the problems you mention, and keep you informed. Currently I’m developing the Mac version on Mac OS X 10.5.7 and didn’t plan to upgrade it to 10.6 as nobody I knew uses this latest release of Mac OS X. Do you have the Leopard Snow (10.6) on your Mac? Best regards, Miguel Pasenau -- ---------------------------------------------------------------- Miguel Pasenau @: ... [GiDlist] Visualization of fields at Tetrahedra Gauss Points
Send by: Claudio AC Silva I am having problems when trying to visualize fields defined at Gauss Points of tetrahedra elements if 10 Gauss Points are used (if the results are defined at 4 Gauss Points of the same tetrahedra, there is no problem). First of all, the fields at Gauss Points are only shown in "Contour Fill" and not in "Smooth Contour Fill". Then, if I choose the visualization of any field defined at Gauss Points in the "Contour Fill" option, GiD closes with segmentation fault. The same happens if 10 Gauss points are "Given" or "internal". I am using the last GiD version for Linux 64 and I am attaching two small examples that cause those problems here. Is it a software bug or my postprocess files are incorrect? Thank you in advance, Claudio _____________________________________________________ Claudio Alessandro de Carvalho Silva, Dr. Eng. (#329333) CAE Solutions Thorus Scisoft - www.thorus-scisoft.com.br Fone:+55 19 3705-4002 _____________________________________________________ This message is intended solely for the use of its addressee and may contain privileged or confidential information. If you are not the addressee you should not distribute, copy or file this message. In this case, please notify the sender and destroy its contents immediately. Esta mensagem é para uso exclusivo de seu destinatário e pode conter informações privilegiadas e confidenciais. Se você não é o destinatário, não deve distribuir, copiar ou arquivar a mensagem. Neste caso, por favor, notifique o remetente da mesma e destrua imediatamente a mensagem. -------------- next part -------------- A non-text attachment was scrubbed... Name: diff-test.post.msh Type: application/octet-stream Size: 13814 bytes Desc: not available Url : ... [GiDlist] (no subject)
Send by: Hao Chen
Dear ABEL,
Your explanation is quite clear. It perfectly solve my problem.Thank you very much for your fast reply.
Best regards,
Chen
Dear Chen,
If you want to generate a volume mesh using GiD, you must be in one of these two situations:
- topological closed set of surfaces. In this case, you can create the volume (Geometry->Create->Volume) and generate the mesh (Mesh->Generate).
- a conformal mesh which close a volume (each edge have HigherEntity==2). In this case, you can generate the volume mesh selecting (Mesh->MeshFromBoundary), and selecting all the triangles closing the volume. This option is only available from the Right Buttons (you can set them by clicking 'Utilities->Tools->Toolbars').
If I have understood well, you are not in one of these cases, so you will have to do some work to reach one of these situations.
Kind regards,
ABEL
_________________________________
Abel Coll Sans - Civil Engineer
CIMNE - International Center for Numerical Methods in Engineering
Ofice c-2, C1 building - Campus Nord UPC
Gran Capità s/n, 08034 Barcelona
T: 34 - 93 401 74 03 Fax: 34 - 93 40 65 17
AVISO IMPORTANTE
Los datos de carácter personal contenidos en el mensaje, se registrarán en un fichero para facilitar la gestión de las comunicaciones de CIMNE. Se pueden ejercitar los derechos de acceso, rectificación, cancelación y oposición por escrito, dirigiéndose a nuestras oficinas de CIMNE, Gran Capitán s/n, Edificio C1 - Campus Norte UPC, 08034 Barcelona, España.
AVÍS IMPORTANT
Les dades de caràcter personal contingudes en aquest missatge es registraran en un fitxer per facilitar la gestió de les comunicacions del CIMNE. Es poden exercir els drets d'accés, rectificació, cancel·lació i oposició, per escrit a les nostres oficines del CIMNE, Gran Capità s/n, Edifici C1, Campus Nord UPC, 08034 Barcelona, Espanya.
IMPORTANT NOTICE
All personal data contained in this mail will be processed confidentially and stored in a file property of CIMNE in order to manage corporate communications. You may exercise the right of access, rectification, deletion and objection by letter sent to CIMNE, Gran Capitán, Edificio C1 - Campus Norte UPC, 08034 Barcelona, Spain.
De: ...
[GiDlist] How to generate volume mesh out of surface mesh
Send by: Hao Chen
Dear ABEL and everyone,
I started from some simple cases, for example the rectangle, first mesh it by triangle, and then get the bounday mesh of linear segments. And then use the linear segments to generate the surface mesh. That works perfectly.
But, when I applied it to a little bit complex as a 3D case, some error appeared. Please see the attached msh file. I want to generate 3 rectanglar surface meshes from the linear elements, when I choose one rectangle to generate surface mesh, it said rejected 14037672 elements(must have the same z). I can guarantee each rectangle is on the same plane, and even I turn it into Z plane, it still give the same error.
Best regards,
Chen
From: ...
[GiDlist] RE: [GiDlist] How to generate volume mesh out of surface mesh
Send by: Hao Chen
Dear ABEL and everyone,
I started from some simple cases, for
example the rectangle, first mesh it by triangle, and then get the
bounday mesh of linear segments. And then use the linear segments to
generate the surface mesh. That works perfectly.
But, when I
applied it to a little bit complex as a 3D case, some error appeared.
Please see the attached msh file. I want to generate 3 rectanglar
surface meshes from the linear elements, when I choose one rectangle to
generate surface mesh, it said rejected 14037672 elements(must have the
same z). I can guarantee each rectangle is on the same plane, and even
I turn it into Z plane, it still give the same error.
Best regards,
Chen
From: ...
[GiDlist] NURBS FEM postprocessing
Send by: Ralph Echter Hello to GID support, I have some question concerning postprocessing/ visualization of NURBS FEM results. I have written a small C Code using the preprocessor data of GID (knot vector data, control point data, weights) for setting up my finite element code which is so far only plane 2D. What I obtain from my code are the discrete control point displacement values. However what I cannot not find in GID is a method of how to plot those results. As GID provides me with all required data for defining NURBS basis functions see above- knot vector data, control point data, weights- it should normally be not too difficult to create some 2D geometry plot (parametric plot using NURBS basis functions and control point data) as well as 2D deformed geometry plots (parametric plot using NURBS basis functions and control point data+discrete control point displacement values). Maybe you have some idea of how to visualize such kind of data . Thanks in advance Sincerely Ralph Echter -- Ralph Echter Institute of Structural Mechanics University of Stuttgart, Germany ... [GiDlist] NURBS FEM postprocessing
Send by: Enrique Escolano Really GiD doesn't has specialized plots for NURBS-FEM results (where the results are expressed as NURBS parameters: control points, weigths and knots) You must transform this kind of representation to a classical mesh results, where you provide the results on the mesh nodes. To do it, you need to use an auxiliary mesh (you can generate a GiD mesh) and associate each node with the parametric coordinates on the NURBS parametric space of the geometrical source entity. You need to do the inverse of the parametrization: from a 3D node calculate the u,v on each source NURBS surface, or directly create a mesh in the u,v parametric surface space Then for each result (also displacements) must calculate for each node the result value (evaluating the NURBS expression of your results for the u,v of the node) Note that your NURBS results could be discontinuous between neighbor surfaces: you will have multiple values for a node belonging to multiple surfaces, maybe do you want to smooth this result to a single averaged value !! Then you can express your results in a classical way, with a GiD .post.msh mesh file, and a .post.res results file, with nodal results (see GiD help to know the format of this postprocess results file, or use our GiDPost library to write them) If you only want to plot the deformated shape, you can write a .geo GiD geometry file, with the new geometric NURBS parameters, and you can compare with the original shape. to know the .geo ASCII format you can see ... [GiDlist] RE: [GiDlist] How to generate volume mesh out of surface mesh
Send by: Hao Chen
Dear all,
ok, I have solved the problem, I have to make the surface on the z=0 plane to generate surface mesh out of linear bounary mesh. It is a little unconvenient, isn't it. Hope the GID can improve this function in the next version.
Best regards,
Chen
From: chenhao198109263538 at hotmail.com
To: gidlist at gatxan.cimne.upc.edu
Subject: [GiDlist] RE: [GiDlist] How to generate volume mesh out of surface mesh
Date: Mon, 7 Sep 2009 15:16:14 +0800
Dear ABEL and everyone,
I started from some simple cases, for example the rectangle, first mesh it by triangle, and then get the bounday mesh of linear segments. And then use the linear segments to generate the surface mesh. That works perfectly.
But, when I applied it to a little bit complex as a 3D case, some error appeared. Please see the attached msh file. I want to generate 3 rectanglar surface meshes from the linear elements, when I choose one rectangle to generate surface mesh, it said rejected 14037672 elements(must have the same z). I can guarantee each rectangle is on the same plane, and even I turn it into Z plane, it still give the same error.
Best regards,
Chen
From: ...
[GiDlist] RE: [GiDlist] RE: [GiDlist] How to generate volume mesh out of surface mesh
Send by: Abel Coll Dear Chen,
You are right: it is an inconvenient to force the user to have the "plane" geometry in the z=0 plane. This is like this because it was thought for 2d geometries (only taking care on x and y coordinates).
We will take it into account for next developments.
Kind regards, and thank you very much for the information,
ABEL
_________________________________
Abel Coll Sans - Civil Engineer
CIMNE - International Center for Numerical Methods in Engineering
Ofice c-2, C1 building - Campus Nord UPC
Gran Capità s/n, 08034 Barcelona
T: 34 - 93 401 74 03 Fax: 34 - 93 40 65 17
_____
AVISO IMPORTANTE
Los datos de carácter personal contenidos en el mensaje, se registrarán en un fichero para facilitar la gestión de las comunicaciones de CIMNE. Se pueden ejercitar los derechos de acceso, rectificación, cancelación y oposición por escrito, dirigiéndose a nuestras oficinas de CIMNE, Gran Capitán s/n, Edificio C1 - Campus Norte UPC, 08034 Barcelona, España.
AVÍS IMPORTANT
Les dades de caràcter personal contingudes en aquest missatge es registraran en un fitxer per facilitar la gestió de les comunicacions del CIMNE. Es poden exercir els drets d'accés, rectificació, cancel·lació i oposició, per escrit a les nostres oficines del CIMNE, Gran Capità s/n, Edifici C1, Campus Nord UPC, 08034 Barcelona, Espanya.
IMPORTANT NOTICE
All personal data contained in this mail will be processed confidentially and stored in a file property of CIMNE in order to manage corporate communications. You may exercise the right of access, rectification, deletion and objection by letter sent to CIMNE, Gran Capitán, Edificio C1 - Campus Norte UPC, 08034 Barcelona, Spain.
_____
_____
De: ...
[GiDlist] (no subject)
Send by: Butler, Kathryn Dr. Dear friends at GiD,
I have an IGES file that I would like to import, but the content is nodes and elements only (types 134 and 136). Although my GiD 9.0.4 version won't import it, I see from the online documentation that the beta version of GiD will. Could I be allowed to use it for this purpose, and is it possible to then convert the geometry into a form that can be read by GiD 9.0.4 and other software? Thank you!
Best regards,
Kathy
Kathryn M. Butler, Ph.D.
National Institute of Standards and Technology
Building and Fire Research Laboratory
100 Bureau Drive Stop 8665
Gaithersburg, MD 20899-8665
phone: (301) 975-6673
fax: (301) 975-4052
email: ...
[GiDlist] (no subject)
Send by: Adrià Melendo Dear Kathy, All GiD 9 versions use the same validation, since you can use any GiD 9 version with the same password that you are already using, specifically the last beta version GiD9.2.1b Backward compatibility it's not guarantied, so not all files saved with beta version could be read with official version but usually it can be done. Sincerely, Adrià _____ AVISO IMPORTANTE Los datos de carácter personal facilitados están registrados en un fichero con la finalidad de facilitar la gestión de las comunicaciones de CIMNE. Puede ejercitar los derechos de acceso, rectificación, cancelación y oposición mediante petición dirigiéndose a nuestras oficinas en Ed. C1 Campus Norte UPC. Gran Capitán s/n Barcelona AVIS IMPORTANT Les dades de caràcter personal facilitades seran registrades en un fitxer amb la finalitat de facilitar les gestions de les comunicacions de CIMNE. Pot exercir els drets d'accés, rectificació i cancel·lació, per escrit a les nostres oficines en Ed. C1 Campus Nord UPC. Gran Capità s/n Barcelona. IMPORTANT NOTICE All personal data contained on this mail will be processed confidentially and registered in a file property of CIMNE., in order to manage corporate communications. You may exercise the rights of access, rectification, erasure and object by letter sent to Ed. C1 Campus Norte UPC. Gran Capitán s/n Barcelona. _____ De: ... [GiDlist] (no subject)
Send by: Enrique Escolano Dear Kathy, GiD 9.0.4 is also able to read this IGES 134 and 136 entity types, The mesh of GiD 9.1.x beta versions can be also read by GiD 9.0.x versions, and can be exported to other softwares using some template or 'problem type', like NASTRAN, ABAQUS, LsDyna, Fluent, etc If you can't read your file, could send (directly to escolano at cimne.upc.edu instead the GiDList) to have a look and try to solve the problems. Regards Enrique Escolano ----- Original Message ----- From: Butler, Kathryn Dr. To: gidlist at gid.cimne.upc.edu... [GiDlist] Exportar malla en capas
Send by: Nacho Hola amigos, Tengo distintas superficies ubicadas en disitintas capas de un modelo de gid. Me gustaría saber si es posible exportar la malla únicamente de las capas que yo quiera y no de todas. Exporto un dxf sap2000 gracias -------------- next part -------------- An HTML attachment was scrubbed... URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20090915/e9934ccd/attachment.htm [GiDlist] Exportar malla en capas
Send by: Enrique Escolano Es posible salvar solo que hay en las capas encendidas mediante, Files->Export->On layers... pero se salva con formato GiD, no existe esto para otros formatos. En cualquier caso es muy facil simplemente guardar, borrar todo lo de las capas indeseadas, exportar, y volver a cargar el modelo completo. Enrique Escolano ----- Original Message ----- From: Nacho To: Lista GiD Sent: Tuesday, September 15, 2009 11:01 AM Subject: [GiDlist] Exportar malla en capas Hola amigos, Tengo distintas superficies ubicadas en disitintas capas de un modelo de gid. Me gustaría saber si es posible exportar la malla únicamente de las capas que yo quiera y no de todas. Exporto un dxf sap2000 gracias -------------- next part -------------- An HTML attachment was scrubbed... URL: ... [GiDlist] Vtk postprocessor output
Send by: Smith, Mark Hi GiD team I've recently discovered paraview http://www.paraview.org/ which has some very nice features ;-) do you have a translator to convert GiD post processor output files into vtk format? or could I request that GiD has an option in postprocess to export the data to vtk format? like you have in the pre processor where you have options to export geometry in different formats. Best regards mark Please be advised that this email may contain confidential information. If you are not the intended recipient, please do not read, copy or re-transmit this email. If you have received this email in error, please notify us by email by replying to the sender and by telephone (call us collect at +1 202-828-0850) and delete this message and any attachments. Thank you in advance for your cooperation and assistance. In addition, Danaher and its subsidiaries disclaim that the content of this email constitutes an offer to enter into, or the acceptance of, any contract or agreement or any amendment thereto; provided that the foregoing disclaimer does not invalidate the binding effect of any digital or other electronic reproduction of a manual signature that is included in any attachment to this email. ... [GiDlist] Vtk postprocessor output
Send by: Miguel Adolfo Pasenau de Riera Hi, sorry, but at the moment there is no VTk export option in GiD. We can think it for the next version, or implement sort of a plug-in approach. thanks for the suggestion, best regards, Miguel Pasenau -- ---------------------------------------------------------------- Miguel Pasenau @: miguel at cimne.upc.edu Despacho C2, Edifico C1, Campus Norte UPC, c/ Gran Capitán s/n 08034 - Barcelona ( SPAIN) T: +34 3 93 401 74 03 F: +34 3 93 401 65 17 ---------------------------------------------------------------- IMPORTANT NOTICE All personal data contained in this mail will be processed confidentially and stored in a file property of CIMNE in order to manage corporate communications. You may exercise the right of access, rectification, deletion and objection by letter sent to CIMNE, Gran Capitán, Edificio C1 - Campus Norte UPC, 08034 Barcelona, Spain. -----Mensaje original----- De: ... [GiDlist] Problems with preprocessor
Send by: fsalazar at cimne.upc.edu Good morning I'm using the latest beta version of GiD for Linux (9.2.3b). It happens frecuently that when I'm working for a while with the preprocessor, the computer suddenly stops recognizing the keyboard. I need to restart my computer to repair it. So, I have to stop the running calculations, which is annoying, of course. Any suggestions? Thanks in advance! Fernando Salazar González Ingeniero de Caminos, Canales y Puertos CIMNE Paseo Gral Martínez Campos, 41, 9º Izq. Madrid 28010. Tel. +34 91 319 13 59 Tel. +34 610 234 477 Fax: +34 91 319 13 59 fsalazar at cimne.upc.edu... [GiDlist] Problems with preprocessor
Send by: Ramon Ribó I use GiD on Linux and this program has never appeared to me. So I assume that it depends on the computer configuration/system. At least, to alleviate the problem, you do not probably need to restart the full system, just the graphical part. Do a logout/login or a Ctrl-Alt-Backspace and the keyboard should work again. ---- Compass Ing. y Sistemas Dr. Ramon Ribo http://www.compassis.com ramsan at compassis.com c/ Tuset, 8 7-2 tel. +34 93 218 19 89 08006 Barcelona, Spain fax. +34 93 396 97 46 2009/9/22 <... [GiDlist] GiD performance in case of many regions
Send by: Martin.Meiler Hi GiD-Team, another question concerning GiD Postprocessing. If i have a simulation result and i start postprocessing GiD's performance is in some cases very poor. If my model consists of several small regions (named group of elements) GiDs performance is quite bad. If i combine some of these regions into larger regions, GiDs performance increases tremendously. The number of elements is still the same, the results are still the same, but why does performance increate that much or better why do multiple regions slow GiD down? I am sorry for not providing an example, but i can not send the models where this behavior occurs. Best regards Martin -- -------------------------------- SIMetris GmbH Dipl.-Ing. Martin Meiler Am Weichselgarten 7 D - 91058 Erlangen-Tennenlohe Tel.: +49 (0)9131 691 280 Fax.: +49 (0)9131 691 285 Email: ... [GiDlist] Howto setup Perspective for MultiWindow View by Tcl Scripting?
Send by: Martin.Meiler Hi GiD-Team,
is there a way to setup the perspective for a subwindow of GiD.
Currently i can switch to multi-window view by using the Tcl Command
GiD_Process Mescape View NewWin 2UD
But how can i setup the perspective like
GiD_Process Mescape View Rotate Angle 270 90
for the upper window and
GiD_Process Mescape View Rotate Angle 180 90
for the lower window
using Tcl scripting commands?
Best regards
Martin
--
--------------------------------
SIMetris GmbH
Dipl.-Ing. Martin Meiler
Am Weichselgarten 7
D - 91058 Erlangen-Tennenlohe
Tel.: +49 (0)9131 691 280
Fax.: +49 (0)9131 691 285
Email: martin.meiler at simetris.de...
[GiDlist] Howto setup Perspective for MultiWindow View by Tcl Scripting?
Send by: Enrique Escolano This is a difficult question, I had to search on the source code to know how to do it!! You must know the name of the "togl" widget of each window, and then can use its "gidmakecurrent" procedure before invoke process commands that change the view. Probably with your 2UD windows the name of this widgets are ".gid.central.s" for the upper window and ".gid.central.wins.graphwin2.s" for the lower window (but maybe this widget names are different or we can change it in the future, maybe we must provide some tcl procedure to easily do it:) then you can use: .gid.central.s gidmakecurrent GiD_Process Mescape View Rotate Angle 270 90 .gid.central.wins.graphwin2.s gidmakecurrent GiD_Process Mescape View Rotate Angle 180 90 Best regards Enrique Escolano ----- Original Message ----- From: "Martin.Meiler" <... [GiDlist] Finding maxima
Send by: sserebrinsky at gmail.com Hi, I am a newbie with GiD. I have a .msh file for a 2D mesh, and a .res file with scalar field data on the mesh, for several time frames. I want to extract, for each node, the maximum value of the scalar field, and get a contour plot of these maximum values, regardless of the time at which each maximum is attained. In addition, I would like to get a contour plot of the times at which the maxima are attained. Is any of these two tasks feasible? As of now, I am running a script to perform these tasks, generating new res files. Thanks a lot. [GiDlist] Finding maxima
Send by: Miguel Adolfo Pasenau de Riera Hello, if i understand you correctly, you want to do a contour fill of the maximum nodal values of a scalar results for all the steps, i.e., if node 1 gets its maximum at step 2 and node 2 gets its maximum at step 8, you want to do a contour fill of node 1, maximum values (step2) and node 2, maximum values (step 8). By now there is no direct possibility to get this. something similar is the option 'Options-->Contour-->Set limits-->All/visible sets for All steps' which looks for the min/max values for all the steps and uses this colour map to do the contour fill. You can get what you want using a macro in tcl. i send you enclosed an example. you can use it in two ways: enter in the command line: -np- <FullPathToFile>MaxContour.tcl or create an empty macro, edit it: and in the empty 'code' box (bottom right quarter), enter the contents of the MaxContour.tcl file. (if the code box does not appear, click on the icon just below the scrollbar of the macros list. Miguel Pasenau -- ---------------------------------------------------------------- Miguel Pasenau @: ... [GiDlist] Finding maxima
Send by: sserebrinsky at gmail.com Dear Miguel, I have performed the actions you listed to add the tcl macro. Execution gives me a message stating that "Maximum simulado" was created from "simulado", but I cannot find the dataset for plotting it. I have exported the postprocessing information to ASCII file, and "Maximum simulado" data are there... Thanks a lot Santiago On Thu, Oct 8, 2009 at 8:42 AM, Miguel Adolfo Pasenau de Riera < miguel at cimne.upc.edu> wrote: > Hello, > > if i understand you correctly, you want to do a contour fill of the maximum >... [GiDlist] Re: GiD_Geometry does not return new entities
Send by: Enrique Escolano Hello Martin, This is a bug, We have fixed it for the next beta version 9.2.5b (just today we have released a new 9.2.4b beta version for Windows x32 and x64, but this correction is not in that versions) Thanks for the bug report Enrique ----- Original Message ----- From: "Martin.Meiler" <Martin.Meiler at simetris.de> To: <gidlist at gatxan.cimne.upc.edu> Sent: Thursday, October 08, 2009 7:36 PM Subject: GiD_Geometry does not return new entities Hi GiD-Team, i am facing problems with the command GiD_Geometry. I used this command for entity generation tasks, i.e. % GiD_Geometry create point append Layer0 0 0 0.1 14 % GiD up to version 9.2.0 returned the new entity number. GiD 9.2.3 does not return the new entity numbers, but 0. % GiD_Geometry create point append Layer0 0 0 0.1 0 % Have there been any changes to this command? Best regards Martin -- -------------------------------- SIMetris GmbH Dipl.-Ing. Martin Meiler Am Weichselgarten 7 D - 91058 Erlangen-Tennenlohe Tel.: +49 (0)9131 691 280 Fax.: +49 (0)9131 691 285 Email: ... [GiDlist] control hypotenuse direction of a triangular meshing
Send by: Thanh Chau Dinh Dear all, I am using GiD 9.0.2. As I mesh a rectangular plate with nonsymetrical structured triangular elements, I can not control the hypotenese direction of the element. It is always from bottom left to top right of a rectangular. Could you please help me how to modify this hypotenuse direction? Thank you in advance. Thanh -------------- next part -------------- An HTML attachment was scrubbed... URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20091009/7c5f26b1/attachment.htm [GiDlist] control hypotenuse direction of a triangular meshing
Send by: Enrique Escolano You can't control this direction. You must do some trick, like swap the normal of the surface (but then the elements normal will be also swapped) ----- Original Message ----- From: Thanh Chau Dinh To: gidlist at gatxan.cimne.upc.edu Sent: Friday, October 09, 2009 4:39 AM Subject: [GiDlist] control hypotenuse direction of a triangular meshing Dear all, I am using GiD 9.0.2. As I mesh a rectangular plate with nonsymetrical structured triangular elements, I can not control the hypotenese direction of the element. It is always from bottom left to top right of a rectangular. Could you please help me how to modify this hypotenuse direction? Thank you in advance. Thanh -------------- next part -------------- An HTML attachment was scrubbed... URL: ... [GiDlist] Cut planes
Send by: Nunzio Losacco Dear GiD people, I have a very annoying bug (well, I guess it's a bug) happening whenever I try to use "Do cuts --> cut plane --> 3 points". Whenever I try to use this command I have a huge (and apparently random) number of warning windows opening, last time they were 50!!! The warnings are about the fact that "quadratic elements are treated as linear in cut planes" "results at gauss points are not shown", just "warning", etc. Moreover a very small writing says: "to disable this warning do Utilities --> preferences --> use multiple windows". But that command path simply doesn't seem to exist!!! Did anyone else experienced this phenomenon? Regards, n. -------------- next part -------------- An HTML attachment was scrubbed... URL: ... [GiDlist] Cut planes
Send by: Miguel Adolfo Pasenau de Riera the utilities-->preferences-->use multiple windows is wrong. Just change the option 'Pop-up messages' ( located n the 'General' panel of the 'Preferences' window, which can be opened with 'utilities-->preferences') from 'Beginner' to 'Normal'. Then the messages will appear in the command line, and not in separated windows. we'll correct this problem. Thanks for the advice. Miguel Pasenau -- ---------------------------------------------------------------- Miguel Pasenau @: miguel at cimne.upc.edu... [GiDlist] Draw Materials Colours
Send by: Smith, Mark Gid 9.0.4 on windows XP Hi GiD team Is there a way to change the colours of materials when drawn as sometime when they are drawn it assigns white to a region & this looks like an unassigned material region or the same colour is used more than once? Regards mark Please be advised that this email may contain confidential information. If you are not the intended recipient, please do not read, copy or re-transmit this email. If you have received this email in error, please notify us by email by replying to the sender and by telephone (call us collect at +1 202-828-0850) and delete this message and any attachments. Thank you in advance for your cooperation and assistance. In addition, Danaher and its subsidiaries disclaim that the content of this email constitutes an offer to enter into, or the acceptance of, any contract or agreement or any amendment thereto; provided that the foregoing disclaimer does not invalidate the binding effect of any digital or other electronic reproduction of a manual signature that is included in any attachment to this email. ... [GiDlist] Problems with GiD license
Send by: fsalazar at cimne.upc.edu Good morning, GiD team. I'm working in LINUX Opensuse, with the latest beta version of GiD. GiD used to work perfectly, but I had another problem: internet didn't work in LINUX. In order to solve this problem, I checked the configuration of net devices in Yast. Comparing my configuration with the one used by a friend with the same version of Opensuse, we realized that there was a difference in "Net card configuration/General/Activate device". I had the option "Manually", and he had "During boot". I changed this option, and internet started to work. You must be wondering what does Gid have to do with this. Well, the problem is that after changing this option, GiD didn't recognize the license (I use a portable USB one). First, I tried asking for a conventional password to register GiD in the professional version, but it didn´t work. So I tried to undo the change in the configuration of the net devices, turning it to "Manually" again, and the problem was solved. Now I must choose between using GiD and internet, which is quite annoying. Any suggestion? Thanks in advance. Fernando Salazar González Ingeniero de Caminos, Canales y Puertos CIMNE Paseo Gral Martínez Campos, 41, 9º Izq. Madrid 28010. Tel. +34 91 319 13 59 Tel. +34 610 234 477 Fax: +34 91 319 13 59 ... [GiDlist] Problems with GiD license
Send by: Miguel Adolfo Pasenau de Riera Hello, the behavior you are explaining is very strange. My guess is that when YaST configures the network, somehow hassles the usb configuration. For the local password GiD uses the name of the machine (which can be change by the network configuration) and info of your local hard disk. But for the USB password, GiD only uses the serial number of the usb memory stick which is read from /proc/bus/usb/devices, and looks for a password file inside the mounted device (if it's not in $GID/scripts folder). We know about problems with suse distributions, which do not mount automatically the /proc/bus/usb file system, as explained in ... [GiDlist] Prism elements
Send by: zwozniak at cogeco.ca Hi all, I need to generate a single layer of prism elements over a body meshed with tetras. So far I was successful only with right prisms placed between identical parallel flat surfaces. Is there any way to generate more general prism elements? Thank you in advance, Zdzislaw [GiDlist] Prism elements
Send by: Abel Coll Dear Zdzislaw, You can generate prism elements assigning if the volume meshed is set as Semi-structured (Mesh->Semistructured). This only can be applied to topologically prismatic volumes. If you don't want to construct a geometrical volume (only like a extrusion of the triangles of the boundary of a tetra mesh) you can access to the option in the copy window (Utilities->Copy), which are more than a simple extrusion. Kind regards, ABEL _________________________________ Abel Coll Sans - Civil Engineer CIMNE - International Center for Numerical Methods in Engineering Ofice c-2, C1 building - Campus Nord UPC Gran Capità s/n, 08034 Barcelona T: 34 - 93 401 74 03 Fax: 34 - 93 40 65 17 ________________________________ AVISO IMPORTANTE Los datos de carácter personal contenidos en el mensaje, se registrarán en un fichero para facilitar la gestión de las comunicaciones de CIMNE. Se pueden ejercitar los derechos de acceso, rectificación, cancelación y oposición por escrito, dirigiéndose a nuestras oficinas de CIMNE, Gran Capitán s/n, Edificio C1 - Campus Norte UPC, 08034 Barcelona, España. AVÍS IMPORTANT Les dades de caràcter personal contingudes en aquest missatge es registraran en un fitxer per facilitar la gestió de les comunicacions del CIMNE. Es poden exercir els drets d'accés, rectificació, cancel·lació i oposició, per escrit a les nostres oficines del CIMNE, Gran Capità s/n, Edifici C1, Campus Nord UPC, 08034 Barcelona, Espanya. IMPORTANT NOTICE All personal data contained in this mail will be processed confidentially and stored in a file property of CIMNE in order to manage corporate communications. You may exercise the right of access, rectification, deletion and objection by letter sent to CIMNE, Gran Capitán, Edificio C1 - Campus Norte UPC, 08034 Barcelona, Spain. ________________________________ -----Mensaje original----- De: ... [GiDlist] Prism elements
Send by: Enrique Escolano Maybe it is also interesting to you to know that GiD now can generate "boundary layer elements", that are layers of very thin elements close to a boundary (e.g. typical of CFD simulations). To use this feature (last GiD beta versions only) go to menu: Mesh->Boundary Layer->3D Select the volume, and then select surfaces where to apply "boundary layer information" (number of layers, size of first layer, and grow factor) Note: This elements are now tetrahedra, not prisms as you want Enrique Escolano ----- Original Message ----- From: "Abel Coll" <abelcs at cimne.upc.edu... [GiDlist] surfaces generate
Send by: alexis campos Hi, I'm trying to create Surfaces with GID, I mean create a "problem type" in which I could modify parameters of equations or functions and this could generate the Surfaces or volumes (spheres,pyramids, random Surfaces, etc) according to this parameters, my question is Can I do this from the problem type of GID or it's necessary to program this on C and then connect this with GID? Best regards Alexis campos _________________________________________________________________ Discover the new Windows Vista http://search.msn.com/results.aspx?q=windows+vista&mkt=en-US&form=QBRE... [GiDlist] surfaces generate
Send by: Enrique Escolano You can create surfaces at Tcl scripting level. For example, the 'Geometry->Create->Parametric surface...' tool create a cubic approximation to a parametric equation. See 'Parametric.tcl' file inside our scripts folder. See also GiD help about our 'GiD_Geometry' special Tcl-GiD command, to create geometric entities (NURBS, etc) from Tcl Regards Enrique Escolano ----- Original Message ----- From: alexis campos To: gidlist at gatxan.cimne.upc.edu Sent: Wednesday, October 28, 2009 3:53 AM Subject: [GiDlist] surfaces generate Hi, I'm trying to create Surfaces with GID, I mean create a "problem type" in which I could modify parameters of equations or functions and this could generate the Surfaces or volumes (spheres,pyramids, random Surfaces, etc) according to this parameters, my question is Can I do this from the problem type of GID or it's necessary to program this on C and then connect this with GID? Best regards Alexis campos ------------------------------------------------------------------------------ Discover the new Windows Vista Learn more! -------------- next part -------------- An HTML attachment was scrubbed... URL: ... [GiDlist] Another problem with GiD license
Send by: Georg Haasemann Hello GiD team, referring to the mail of Fernando Salazar González, I have another problem with the GiD license. Our GiD is running on a server with Debian and we have a USB license (version 8). When I start Gid, it asks for the password. After providing the password, I can use Gid without any problems. However, when I restart GiD, it will ask for the password again and that's quite annoying. Isn't there any way that GiD can remember the password? Regards, Georg -- Dr.-Ing. Georg Haasemann Technische Universität Dresden Fakultät Maschinenwesen Institut für Festkörpermechanik Tel.: +49 351 463-32656 Fax : +49 351 463-37061 Mail: ... [GiDlist] Another problem with GiD license
Send by: Enrique Escolano Dear Georg, Sorry by the delay in the answer, your message has been received today by some e-mail problems. This problem where the password can't be remembered is because the user that started GiD doesn't has enought privileges to write inside the file 'TemporalVariables' of the GiS 'scripts' folder. To avoid the problem, start GiD once as root, and set the password. Regards Enrique Escolano ----- Original Message ----- From: "Georg Haasemann" <georg.haasemann at tu-dresden.de> To: <gidlist at gatxan.cimne.upc.edu... [GiDlist] test g list
Send by: Miguel Adolfo Pasenau de Riera test g list Miguel Pasenau -- ---------------------------------------------------------------- Miguel Pasenau @: miguel at cimne.upc.edu Despacho C2, Edifico C1, Campus Norte UPC, c/ Gran Capitán s/n 08034 - Barcelona ( SPAIN) T: +34 3 93 401 74 03 F: +34 3 93 401 65 17 ---------------------------------------------------------------- IMPORTANT NOTICE All personal data contained in this mail will be processed confidentially and stored in a file property of CIMNE in order to manage corporate communications. You may exercise the right of access, rectification, deletion and objection by letter sent to CIMNE, Gran Capitán, Edificio C1 - Campus Norte UPC, 08034 Barcelona, Spain. ... [GiDlist] test gid list
Send by: Miguel Adolfo Pasenau de Riera test gid list Miguel Pasenau -- ---------------------------------------------------------------- Miguel Pasenau @: miguel at cimne.upc.edu Despacho C2, Edifico C1, Campus Norte UPC, c/ Gran Capitán s/n 08034 - Barcelona ( SPAIN) T: +34 3 93 401 74 03 F: +34 3 93 401 65 17 ---------------------------------------------------------------- IMPORTANT NOTICE All personal data contained in this mail will be processed confidentially and stored in a file property of CIMNE in order to manage corporate communications. You may exercise the right of access, rectification, deletion and objection by letter sent to CIMNE, Gran Capitán, Edificio C1 - Campus Norte UPC, 08034 Barcelona, Spain. ... [GiDlist] test gid
Send by: miguel at gid.cimne.upc.edu test gid Niguel Pasenau [GiDlist] test gat
Send by: miguel at gid.cimne.upc.edu testing ga Miguel Pasenau [GiDlist] test list
Send by: Miguel Adolfo Pasenau de Riera test list Miguel Pasenau -- ---------------------------------------------------------------- Miguel Pasenau @: miguel at cimne.upc.edu Despacho C2, Edifico C1, Campus Norte UPC, c/ Gran Capitán s/n 08034 - Barcelona ( SPAIN) T: +34 3 93 401 74 03 F: +34 3 93 401 65 17 ---------------------------------------------------------------- IMPORTANT NOTICE All personal data contained in this mail will be processed confidentially and stored in a file property of CIMNE in order to manage corporate communications. You may exercise the right of access, rectification, deletion and objection by letter sent to CIMNE, Gran Capitán, Edificio C1 - Campus Norte UPC, 08034 Barcelona, Spain. ... [GiDlist] test gid list
Send by: Miguel Adolfo Pasenau de Riera test gid list Miguel Pasenau -- ---------------------------------------------------------------- Miguel Pasenau @: miguel at cimne.upc.edu Despacho C2, Edifico C1, Campus Norte UPC, c/ Gran Capitán s/n 08034 - Barcelona ( SPAIN) T: +34 3 93 401 74 03 F: +34 3 93 401 65 17 ---------------------------------------------------------------- IMPORTANT NOTICE All personal data contained in this mail will be processed confidentially and stored in a file property of CIMNE in order to manage corporate communications. You may exercise the right of access, rectification, deletion and objection by letter sent to CIMNE, Gran Capitán, Edificio C1 - Campus Norte UPC, 08034 Barcelona, Spain. ... [GiDlist] test gid list
Send by: CASARES MALDONADO ALEJANDRO Recibido (varias veces). ¿Qué esperan que responda? Saludos Alejandro Casares M. -----Mensaje original----- De: gidlist-admin at gatxan.cimne.upc.edu [mailto:gidlist-admin at gatxan.cimne.upc.edu] En nombre de Miguel Adolfo Pasenau de Riera Enviado el: Jueves, 19 de Noviembre de 2009 5:57 Para: gidlist at gatxan.cimne.upc.edu Asunto: [GiDlist] test gid list test gid list Miguel Pasenau -- ---------------------------------------------------------------- Miguel Pasenau @: ... [GiDlist] test gid list
Send by: Miguel Adolfo Pasenau de Riera No, these were several tries, as i was getting the answers too late. The problem was a defective comunication between de mailing list computer, the mail server of our centre and de mail server of the university. Sorry for the inconveniences, era que hacía diferentes pruebas, pues tardaba bastante en responder. Era comunicación defectuosa entre la máquina de la lista de correo, la máquina servidora de correo de nuestro centro y la máquina servidora de correo de la universidad. Saludos y perdón por las molestias Miguel Pasenau -- ---------------------------------------------------------------- Miguel Pasenau @: ... [GiDlist] Interval Data window bug on Linux
Send by: Daniel Garolera Vinent Dear GiD team, Since GiD version 9.1.1b on Linux systems, I notice that is not possible to switch intervals from Interval Data window. Temporally this bug could be avoided changing intervals from Interval menu, however this option is not as fast as the first one. Cordially, Daniel Garolera -------------- next part -------------- A non-text attachment was scrubbed... Name: daniel_garolera.vcf Type: text/x-vcard Size: 360 bytes Desc: not available Url : http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20091119/c7c417d0/attachment.vcf... [GiDlist] Interval Data window bug on Linux
Send by: Enrique Escolano This bug has been reported and fixed some weeks ago, The next beta version will include this correction Thanks Enrique Escolano ----- Original Message ----- From: "Daniel Garolera Vinent" <daniel.garolera at upc.edu> To: <gidlist at gatxan.cimne.upc.edu> Sent: Tuesday, November 10, 2009 9:28 AM Subject: [GiDlist] Interval Data window bug on Linux > Dear GiD team, > > Since GiD version 9.1.1b on Linux systems, I notice that is not possible > to switch intervals from Interval Data window. Temporally this bug could ... [GiDlist] Interval Data window bug on Linux
Send by: Daniel Garolera Vinent Dear GiD team, Since GiD version 9.1.1b on Linux systems, I notice that is not possible to switch intervals from Interval Data window. Temporally this bug could be avoided changing intervals from Interval menu, however this option is not as fast as the first one. Cordially, Daniel Garolera -------------- next part -------------- A non-text attachment was scrubbed... Name: daniel_garolera.vcf Type: text/x-vcard Size: 360 bytes Desc: not available Url : http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20091119/0f84fe42/attachment.vcf... [GiDlist] Fwd: Problems with GiD license
Send by: fsalazar at cimne.upc.edu Good morning. I sent you a message some time ago, and I haven't recerived an answer. The text of my question is below. Thanks Fernando Salazar González Ingeniero de Caminos, Canales y Puertos CIMNE Paseo Gral Martínez Campos, 41, 9º Izq. Madrid 28010. Tel. +34 91 319 13 59 Tel. +34 610 234 477 Fax: +34 91 319 13 59 fsalazar at cimne.upc.edu www.cimne.com AVISO IMPORTANTE Los datos de carácter personal contenidos en el mensaje, se registrarán enun fichero para facilitar la gestión de las comunicaciones de CIMNE. Se pueden ejercitar los derechos de acceso, rectificación, cancelación y oposición por escrito, dirigiéndose a nuestras oficinas de CIMNE, Gran Capitán s/n, Edificio C1 - Campus Norte UPC, 08034 Barcelona, España. AVIS IMPORTANT Les dades de caràcter personal contingudes en aquest missatge es registraran en un fitxer per facilitar la gestió de les comunicacions del CIMNE. Es poden exercir els drets d'accés, rectificació, cancel·lació i oposició, per escrit a les nostres oficines del CIMNE, Gran Capità s/n, Edifici C1, Campus Nord UPC, 08034 Barcelona, Espanya. IMPORTANT NOTICE All personal data contained in this mail will be processed confidentially andstored in a file property of CIMNE in order to manage corporate communications. You may exercise the right of access, rectification, deletion and objection by letter sent to CIMNE, Gran Capitán, Edificio C1 - Campus Norte UPC, 08034 Barcelona, Spain. BODY { font-family:Arial, Helvetica, sans-serif;font-size:12px; } On Fri 23/10/09 10:55 AM , ... [GiDlist] GiD interface in windows XP
Send by: fsalazar at cimne.upc.edu Hi. I have a problem with GiD for Windows XP. Suddenly it has changed its interface. The menus appear on the right, and are different. There are not pull-down menus, and some of the options have changed. For example, I don't know how to select a problemtype.... I've tried to uninstall GiD and install different versions, but it doesn' work. You can see the new GiD window in the attachment. Thanks Fernando Salazar González Ingeniero de Caminos, Canales y Puertos CIMNE Paseo Gral Martínez Campos, 41, 9º Izq. Madrid 28010. Tel. +34 91 319 13 59 Tel. +34 610 234 477 Fax: +34 91 319 13 59 ... [GiDlist] GiD interface in windows XP
Send by: Abel Coll Dear Fernando,
You can try to take out and put the different bars/menus again using the
Configure Toolbars window. To acces it just click on the right mouse button
over some icon of some bar.
Regards,
ABEL
_________________________________
Abel Coll Sans - Civil Engineer
CIMNE - International Center for Numerical Methods in Engineering
Ofice c-2, C1 building - Campus Nord UPC
Gran Capità s/n, 08034 Barcelona
T: 34 - 93 401 74 03 Fax: 34 - 93 40 65 17
_____
AVISO IMPORTANTE
Los datos de carácter personal contenidos en el mensaje, se registrarán en
un fichero para facilitar la gestión de las comunicaciones de CIMNE. Se
pueden ejercitar los derechos de acceso, rectificación, cancelación y
oposición por escrito, dirigiéndose a nuestras oficinas de CIMNE, Gran
Capitán s/n, Edificio C1 - Campus Norte UPC, 08034 Barcelona, España.
AVÍS IMPORTANT
Les dades de caràcter personal contingudes en aquest missatge es registraran
en un fitxer per facilitar la gestió de les comunicacions del CIMNE. Es
poden exercir els drets d'accés, rectificació, cancel·lació i oposició, per
escrit a les nostres oficines del CIMNE, Gran Capità s/n, Edifici C1, Campus
Nord UPC, 08034 Barcelona, Espanya.
IMPORTANT NOTICE
All personal data contained in this mail will be processed confidentially
and stored in a file property of CIMNE in order to manage corporate
communications. You may exercise the right of access, rectification,
deletion and objection by letter sent to CIMNE, Gran Capitán, Edificio C1 -
Campus Norte UPC, 08034 Barcelona, Spain.
_____
_____
De: ...
[GiDlist] GiD interface in windows XP
Send by: Enrique Escolano Each user has its own copy of some GiD settings (like preferences variables, or window sizes). This information is saved in a file named 'gid.ini' that is stored in a different place depending on the platform e.g. Windows XP: C:Documents and Settings<current user>Application DataGiDgid.ini Windows Vista: C:Users<current user>AppDataRoamingGiDgid.ini Linux: home<current user>GiDgid.ini This gid.ini is shared between all installed GiD's and reinstalling GiD don't modify this file. You can delete it, and then it will be automatically rebuild with default values In any case, your image show that the pull-down menus are hidden, and the right buttons visible, you can change this from Utilities->Tools->Toolbars... (or click the rigth mouse on some toolbar and select 'configure toolbars...') Select the toolbar and its state/location Regards Enrique ----- Original Message ----- From: ... [GiDlist] GiD interface in windows XP
Send by: Ramon Ribó In Linux and MacOSX: $(HOME)/.gidDefaults There is an option when starting GiD in "GiD safe mode", to reset the preferences. ---- Compass Ing. y Sistemas Dr. Ramon Ribo http://www.compassis.com ramsan at compassis.com c/ Tuset, 8 7-2 tel. +34 93 218 19 89 08006 Barcelona, Spain fax. +34 93 396 97 46 2009/11/20 Enrique Escolano <escolano at cimne.upc.edu>: > Each user has its own copy of some GiD settings (like preferences variables, ... [GiDlist] Invoking GiD in postprocessor mode
Send by: Smith, Mark OS windowsXP professional (32bit), GiD 9.0.4 Hi GiD team If I have a .res postprocessing file is there a way I can associate this type of file so when I click on it, it launches GiD in it's postprocessor mode & picks up the .msh file automatically? If I just associate it with GiD it opens gid in the preprocessor mode and warns "this is a new project" then if I swap to the postprocessor it reports it can't find the mesh info even though the .msh file is in the same directory? Regards mark Please be advised that this email may contain confidential information. If you are not the intended recipient, please do not read, copy or re-transmit this email. If you have received this email in error, please notify us by email by replying to the sender and by telephone (call us collect at +1 202-828-0850) and delete this message and any attachments. Thank you in advance for your cooperation and assistance. In addition, Danaher and its subsidiaries disclaim that the content of this email constitutes an offer to enter into, or the acceptance of, any contract or agreement or any amendment thereto; provided that the foregoing disclaimer does not invalidate the binding effect of any digital or other electronic reproduction of a manual signature that is included in any attachment to this email. ... [GiDlist] Invoking GiD in postprocessor mode
Send by: Miguel Adolfo Pasenau de Riera Hello, the problem of invoking gid with a postprocess file was solved in gid 9.2.4b Miguel Pasenau -- ---------------------------------------------------------------- Miguel Pasenau @: miguel at cimne.upc.edu Despacho C2, Edifico C1, Campus Norte UPC, c/ Gran Capitán s/n 08034 - Barcelona ( SPAIN) T: +34 3 93 401 74 03 F: +34 3 93 401 65 17 ---------------------------------------------------------------- IMPORTANT NOTICE All personal data contained in this mail will be processed confidentially and stored in a file property of CIMNE in order to manage corporate communications. You may exercise the right of access, rectification, deletion and objection by letter sent to CIMNE, Gran Capitán, Edificio C1 - Campus Norte UPC, 08034 Barcelona, Spain. -----Mensaje original----- De: ... [GiDlist] Invoking GiD in postprocessor mode
Send by: Enrique Escolano I think that with the last beta versions GiD will do what you want. You can also drag & drop the .post.res or .post.res file over an opened GiD or a GiD starting icon, and GiD will swap to postprocess mode and open your file Regards Enrique ----- Original Message ----- From: "Smith, Mark" <Mark.Smith at linx.co.uk> To: "GiD_list" <gidlist at gatxan.cimne.upc.edu> Sent: Friday, November 13, 2009 12:30 PM Subject: [GiDlist] Invoking GiD in postprocessor mode > OS windowsXP professional (32bit), GiD 9.0.4 ... [GiDlist] test
Send by: Miguel Adolfo Pasenau de Riera test -- ---------------------------------------------------------------- Miguel Pasenau @: miguel at cimne.upc.edu Despacho C2, Edifico C1, Campus Norte UPC, c/ Gran Capitán s/n 08034 - Barcelona ( SPAIN) T: +34 3 93 401 74 03 F: +34 3 93 401 65 17 ---------------------------------------------------------------- IMPORTANT NOTICE All personal data contained in this mail will be processed confidentially and stored in a file property of CIMNE in order to manage corporate communications. You may exercise the right of access, rectification, deletion and objection by letter sent to CIMNE, Gran Capitán, Edificio C1 - Campus Norte UPC, 08034 Barcelona, Spain. ... [GiDlist] Using different kinds of Gauss points
Send by: Thanh Chau Dinh Dear all: Can you help me the following problem? In result file, project.flavia.res, I use 2 different kinds of gauss quadrature points. Particularly, one gauss quadrature point and three gauss quadrature points for two groups of triangular elements. As I view results in postprocess of GiD I can separately view results of each group of elements. Can I view both of them at the same time? I attached here the result of my problem. Thank you in advance and I am looking forward to hearing from you as you can. Regards, Thanh -------------- next part -------------- An HTML attachment was scrubbed... URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20091119/31333e93/attachment-0001.htm... [GiDlist] test
Send by: Miguel Adolfo Pasenau de Riera test -- ---------------------------------------------------------------- Miguel Pasenau @: miguel at cimne.upc.edu Despacho C2, Edifico C1, Campus Norte UPC, c/ Gran Capitán s/n 08034 - Barcelona ( SPAIN) T: +34 3 93 401 74 03 F: +34 3 93 401 65 17 ---------------------------------------------------------------- IMPORTANT NOTICE All personal data contained in this mail will be processed confidentially and stored in a file property of CIMNE in order to manage corporate communications. You may exercise the right of access, rectification, deletion and objection by letter sent to CIMNE, Gran Capitán, Edificio C1 - Campus Norte UPC, 08034 Barcelona, Spain. ... [GiDlist] test gidlist
Send by: Miguel Adolfo Pasenau de Riera test gidlist -- ---------------------------------------------------------------- Miguel Pasenau @: miguel at cimne.upc.edu Despacho C2, Edifico C1, Campus Norte UPC, c/ Gran Capitán s/n 08034 - Barcelona ( SPAIN) T: +34 3 93 401 74 03 F: +34 3 93 401 65 17 ---------------------------------------------------------------- IMPORTANT NOTICE All personal data contained in this mail will be processed confidentially and stored in a file property of CIMNE in order to manage corporate communications. You may exercise the right of access, rectification, deletion and objection by letter sent to CIMNE, Gran Capitán, Edificio C1 - Campus Norte UPC, 08034 Barcelona, Spain. ... [GiDlist] test local
Send by: miguel at gid.cimne.upc.edu local test Miguel Pasenau [GiDlist] test local gid
Send by: miguel at gid.cimne.upc.edu test local gid Miguel Pasenau [GiDlist] ga test
Send by: Miguel Adolfo Pasenau de Riera ga test Miguel Pasenau -- ---------------------------------------------------------------- Miguel Pasenau @: miguel at cimne.upc.edu Despacho C2, Edifico C1, Campus Norte UPC, c/ Gran Capitán s/n 08034 - Barcelona ( SPAIN) T: +34 3 93 401 74 03 F: +34 3 93 401 65 17 ---------------------------------------------------------------- IMPORTANT NOTICE All personal data contained in this mail will be processed confidentially and stored in a file property of CIMNE in order to manage corporate communications. You may exercise the right of access, rectification, deletion and objection by letter sent to CIMNE, Gran Capitán, Edificio C1 - Campus Norte UPC, 08034 Barcelona, Spain. ... [GiDlist] gi test
Send by: Miguel Adolfo Pasenau de Riera gi test Miguel Pasenau -- ---------------------------------------------------------------- Miguel Pasenau @: miguel at cimne.upc.edu Despacho C2, Edifico C1, Campus Norte UPC, c/ Gran Capitán s/n 08034 - Barcelona ( SPAIN) T: +34 3 93 401 74 03 F: +34 3 93 401 65 17 ---------------------------------------------------------------- IMPORTANT NOTICE All personal data contained in this mail will be processed confidentially and stored in a file property of CIMNE in order to manage corporate communications. You may exercise the right of access, rectification, deletion and objection by letter sent to CIMNE, Gran Capitán, Edificio C1 - Campus Norte UPC, 08034 Barcelona, Spain. ... [GiDlist] Problems with the gidlist
Send by: Abel Coll Dear Gidders,
I write this e-mail just to appologize in the name of the GiD Team, because
the GiDList have had some problems last month. That is the reason because
some e-mails were not answered, and you may have recieved some test mail.
Best regards,
ABEL
_________________________________
Abel Coll Sans - Civil Engineer
CIMNE - International Center for Numerical Methods in Engineering
Ofice c-2, C1 building - Campus Nord UPC
Gran Capità s/n, 08034 Barcelona
T: 34 - 93 401 74 03 Fax: 34 - 93 40 65 17
_____
AVISO IMPORTANTE
Los datos de carácter personal contenidos en el mensaje, se registrarán en
un fichero para facilitar la gestión de las comunicaciones de CIMNE. Se
pueden ejercitar los derechos de acceso, rectificación, cancelación y
oposición por escrito, dirigiéndose a nuestras oficinas de CIMNE, Gran
Capitán s/n, Edificio C1 - Campus Norte UPC, 08034 Barcelona, España.
AVÍS IMPORTANT
Les dades de caràcter personal contingudes en aquest missatge es registraran
en un fitxer per facilitar la gestió de les comunicacions del CIMNE. Es
poden exercir els drets d'accés, rectificació, cancel·lació i oposició, per
escrit a les nostres oficines del CIMNE, Gran Capità s/n, Edifici C1, Campus
Nord UPC, 08034 Barcelona, Espanya.
IMPORTANT NOTICE
All personal data contained in this mail will be processed confidentially
and stored in a file property of CIMNE in order to manage corporate
communications. You may exercise the right of access, rectification,
deletion and objection by letter sent to CIMNE, Gran Capitán, Edificio C1 -
Campus Norte UPC, 08034 Barcelona, Spain.
_____
-------------- next part --------------
An HTML attachment was scrubbed...
URL: ...
[GiDlist] view stress as 2 different groups of Gauss quadrature point type used
Send by: Thanh Chau Dinh Dear all: Can you help me the following problem? In result file, project.flavia.res, I use 2 different kinds of gauss quadrature points. Particularly, one gauss quadrature point and three gauss quadrature points for two groups of triangular elements. As I view results in postprocess of GiD I can separately view results of each group of elements. Can I view both of them at the same time? I attached here the result of my problem. Thank you in advance and I am looking forward to hearing from you as you can. Regards, Thanh P/S I send this email again because you may not receive the last one due to the mail-list trouble. -------------- next part -------------- An HTML attachment was scrubbed... URL: ... [GiDlist] view stress as 2 different groups of Gauss quadrature point type used
Send by: Miguel Adolfo Pasenau de Riera Hello, i looked into your example and i found two key issues: - each gauss point definition is made for the whole mesh (both sets: 'No Cracks' and 'Cracks'). So, when you select, for instance, c.fill of Stress-->gauss points given-->Sxx, this result will be used for all the triangles. Then if you use 'several results' one of the c.fill will hide the other c.fill. To achieve what you want, you can define the gp this way: GaussPoints "Gauss points given" ElemType Triangle "No_Cracks" (...) GaussPoints "Enriched gauss points given" ElemType Triangle "Cracks" - the second problem i see is that you use different number of integration points for each gauss points definition. and there is a bug in GiD when it tries to handle both gauss points definitions, we'll try to solve it for the next version of GiD. thanks for the report. Miguel Pasenau -- ---------------------------------------------------------------- Miguel Pasenau @: ... [GiDlist] view stress as 2 different groups of Gauss quadrature point type used
Send by: Thanh Chau Dinh Dear Miguel Pasenau: Thank you very much for your reply. Please let me know if the next version of GiD can handle different GP definitions. Regards, Thanh On Wed, Nov 25, 2009 at 8:15 PM, Miguel Adolfo Pasenau de Riera < miguel at cimne.upc.edu> wrote: > Hello, > > i looked into your example and i found two key issues: > > > > - each gauss point definition is made for the whole mesh (both sets: 'No > Cracks' and 'Cracks'). So, when you select, for instance, c.fill of >... [GiDlist] FigPlex Error
Send by: Cristian Nieto Gamboa Hi. I'm trying to mesh a model that contains contact volumes. My model is a 3D model composed of structured and semistructured mesh. Everything is fine, but when i include the contact volumes there is an error that says: "FigPlex: set_at. Repeated index 343 in FigPlex", then the program closes. I don't know what this error means. I've verified that all surfaces elements have the same number of divisions. Is there any idea about this error? Thanks for your help Best regards Cristian NIETO PhD Student Laboratoire de Mécanique de Sols, Structures et Materiaux - LMSSMat Ecole Centrale Paris - Coyne et Bellier. Bureau d'ingénieurs Conseils Paris - France ... [GiDlist] FigPlex Error
Send by: Enrique Escolano Contact surfaces are a relativelly unusual kind of entity, probably it is an error of some GiD version doing some operation without take in account this kind of entity. (the message say that some entity has a wrong number '343' that was already used for other entity) Please, send us zipped the GiD model, to have a look. (could send directly to escolano at cimne.upc.edu instead the whole gidlist) Regards Enrique Escolano ----- Original Message ----- From: "Cristian Nieto Gamboa" <cristian.nieto-gamboa at ecp.fr... [GiDlist] Problem types
Send by: Smith, Mark OS:windowsXP Hi GiD team Is it possible that a problemtype which worked OK with GiD9.0.4 would produce a different result with it's .bas file with GiD9.2.4b? As I've been getting some odd behaviour. Regards mark Please be advised that this email may contain confidential information. If you are not the intended recipient, please do not read, copy or re-transmit this email. If you have received this email in error, please notify us by email by replying to the sender and by telephone (call us collect at +1 202-828-0850) and delete this message and any attachments. Thank you in advance for your cooperation and assistance. In addition, Danaher and its subsidiaries disclaim that the content of this email constitutes an offer to enter into, or the acceptance of, any contract or agreement or any amendment thereto; provided that the foregoing disclaimer does not invalidate the binding effect of any digital or other electronic reproduction of a manual signature that is included in any attachment to this email. ... [GiDlist] Problem types
Send by: Enrique Escolano Hello Mark, We always try to maintain back compatibility with old problemtypes/models, but each new GiD version can potentially produce some difference (because new bugs can appear with the new implementations or also some correction of old bugs can result in a different behaviour) Send us the example (including the problemtype) to compare the .dat file obtained using both versions, Probably there is a bug of the 9.2.4b beta version that we can fix for the next beta. Please, send it directly to escolano at cimne.upc.edu Regards Enrique ----- Original Message ----- From: "Smith, Mark" <... [GiDlist] Results in local axes
Send by: Daniel Garolera Dear GiD Team, I have a mesh with some elements with results expressed in terms of local axes (normal and tangential system). If we want to plot the results of this kind of element, we need to transform each local component (normal and tangential, for instance) to global system (x, y and z). Therefore, if we take into account that this operation is repeated for each vectorial variable, we realize that extra memory is used. Example (f_normal; f_tangential) => (f_normal_x , f_normal_y ; f_tangential_x , f_tangential_y) I was thus wondering if GiD is able to make such a transformation. For example, just introducing the local system and local components of my variables. Before sending this email I was checking the GiD manual and I found a result type called “localAxes”. However I did not understand how it works and how local axes are introduced. Please let me known if it is possible to proceed like this. I thank you in advance for your collaboration. With best regards, Daniel Garolera ... [GiDlist] Results in local axes
Send by: Miguel Adolfo Pasenau de Riera Hello, no, at the moment gid cannot transform results defined using local axes to global ones, as you mentioned. With the local axes result's type you can visualiza the local axes definition given the three Euler angles, but not a locally defined result. Perhaps, one way to achieve this is to create a macro which combines the locally defined results and the given localAxes to get the global ones. Although it's a bit complicated, you can also use the already defined macro, in the macro toolbar, and the window in Windows-->create results..., as base for your macro. best regards, Miguel Pasenau -- ---------------------------------------------------------------- Miguel Pasenau @: ... [GiDlist] Surface mesh from solid mesh
Send by: Smith, Mark windowsXP GiD9.0.4 Hi GiD team I have results of a 3D stress analysis (quadratic tets) and want to be able to compare the deformed meshes from 2 analysis to visualise how much the surface moves between the 2 results, the original mesh for the 2 analysis are identical. I have tried exporting the deformed mesh as a gid ascii mesh from the postprocessor then importing it into the preprocessor but can find no way of turning this into a surface only mesh i.e. throwing away all the internal elements. I have done something similar in the past but with surface meshes from a shell element analysis where I have been able to export the surface mesh & re-import this as triangle element geometry. So if I can find a way to convert this solid mesh into surface only mesh I should be able to do what I want. I have also tried importing both deformed meshes (add no share) into the preprocessor but seem to be unable to import each to a different layer to make visualisation easier? Open multiple in the postprocessor doesn't help either. I have also tried using utilities list nodes to export the coordinates of the nodes of interest but it will only list the first 100 entries? Any suggestions most welcome. Regards mark Please be advised that this email may contain confidential information. If you are not the intended recipient, please do not read, copy or re-transmit this email. If you have received this email in error, please notify us by email by replying to the sender and by telephone (call us collect at +1 202-828-0850) and delete this message and any attachments. Thank you in advance for your cooperation and assistance. In addition, Danaher and its subsidiaries disclaim that the content of this email constitutes an offer to enter into, or the acceptance of, any contract or agreement or any amendment thereto; provided that the foregoing disclaimer does not invalidate the binding effect of any digital or other electronic reproduction of a manual signature that is included in any attachment to this email. ... [GiDlist] Surface mesh from solid mesh
Send by: Miguel Adolfo Pasenau de Riera Hello, You can use the option Files-->Export-->Post information-->ASCII boundaries... which writes the boundaries of your volumes, and its results, in ASCII files: name.msh and mane.res. If your mesh is deformed when you select this option, then the saved boundary is also deformed. Is that what you want? best regards, Miguel Pasenau -- ---------------------------------------------------------------- Miguel Pasenau @: miguel at cimne.upc.edu Despacho C2, Edifico C1, Campus Norte UPC, c/ Gran Capitán s/n 08034 - Barcelona ( SPAIN) T: +34 3 93 401 74 03 F: +34 3 93 401 65 17 ---------------------------------------------------------------- IMPORTANT NOTICE All personal data contained in this mail will be processed confidentially and stored in a file property of CIMNE in order to manage corporate communications. You may exercise the right of access, rectification, deletion and objection by letter sent to CIMNE, Gran Capitán, Edificio C1 - Campus Norte UPC, 08034 Barcelona, Spain. -----Mensaje original----- De: ... [GiDlist] List entity information
Send by: Smith, Mark Windows XP GiD9.0.4 Hi Enrique I have noticed that when I interrogate arc details, using list entities lines, it can report quite differing radius values for arcs that visibly seem almost identical. Attached is a geo file of 1 circle & 2 arcs lying on top of one another and a line across the diameter. The txt file shows what utilities:list:lines reports. It says the 2 arcs have radius 2.48661 and the circle has radius 2.625 ? What is going on? 2.625 is the correct value I believe? Regards mark Please be advised that this email may contain confidential information. If you are not the intended recipient, please do not read, copy or re-transmit this email. If you have received this email in error, please notify us by email by replying to the sender and by telephone (call us collect at +1 202-828-0850) and delete this message and any attachments. Thank you in advance for your cooperation and assistance. In addition, Danaher and its subsidiaries disclaim that the content of this email constitutes an offer to enter into, or the acceptance of, any contract or agreement or any amendment thereto; provided that the foregoing disclaimer does not invalidate the binding effect of any digital or other electronic reproduction of a manual signature that is included in any attachment to this email. -------------- next part -------------- An embedded and charset-unspecified text was scrubbed... Name: line entities.txt Url: ... [GiDlist] List entity information
Send by: Enrique Escolano You are rigth, In some cases, for this listing pourposes, the curvature radius has been calculated only approximated (estimating second derivatives instead to do it analitically). We fixed it now for the next beta. In any case, the radius and center of NURBS arcs is not internally stored, it is calculated and this numerical calculation could be not very exact. Probably in the future we will store wheter the NURBS has arc shape, and its parameters (center, radius, and plane normal) and also we must reconsider how we are calculating this properties when they are unknown, to implement a numerically more stable method. Regards Enrique ----- Original Message ----- From: "Smith, Mark" <... [GiDlist] Color fill in postprocess using Natural Coordinates: Given
Send by: Thanh Chau Dinh Dear all: While I use Color Fill option to view results for a 8-node quadrilateral by Natural coordinate of Gauss point given I just saw color at each Gauss points not color fill as usual. This problem occurs as I use 4x4 Gauss points but does not as I use 2x2 Gauss points. Can you help me to fix this trouble to have true color fill over whole elements? I attach here the project files, including project.flavia.res created by myself. Thank you in advance and I am looking forward to hearing from you. Best, Thanh -------------- next part -------------- An HTML attachment was scrubbed... URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20091205/319ec54d/attachment.htm... [GiDlist] Color fill in postprocess using Natural Coordinates: Given
Send by: Thanh Chau Dinh Dear all: While I use Color Fill option to view stress results for a 8-node quadrilateral by Natural coordinate of Gauss point given I just saw color at each Gauss points not color fill as usual. This problem occurs as I use 4x4 Gauss points but does not as I use 2x2 Gauss points. Can you help me to fix this trouble to have true color fill over whole elements? I attach here the project files, including project.flavia.res created by myself. Thank you in advance and I am looking forward to hearing from you. Best, Thanh P/S: I sent this email before but there is no answer. Please help me -------------- next part -------------- An HTML attachment was scrubbed... URL: ... [GiDlist] generating surface mesh from stl
Send by: MArtin Koske hi, i imported an .stl file and used the function Geometry -> Create -> Surface mesh. after that, i got the message: Error: element 23434 has two or more adyacent elements at the same edge -> elem 23988 and elem 23709. Cannot continue. so my question are -how can a fix the problem? -is there a way to find the elements and delete them? -or can i change somethings in options of the programm to get it fixed? thx martin [GiDlist] generating surface mesh from stl new
Send by: MArtin Koske hi, i solved my problem with creating the surface. i just had to simplify my mesh. but now i got the next problem with creating an volume! i got these errors: line number 1 is 1 times into volume generation line number 2 is 1 times into volume generation line number 3 is 1 times into volume generation line number 124 is 1 times into volume generation line number 123 is 1 times into volume generation line number 122 is 1 times into volume generation line number 130 is 1 times into volume generation surface 1 is over 20 surfaces surface 2 is over 8 surfaces surface 3 is over 2 surfaces surface 5 is over 2 surfaces surface 9 is over 2 surfaces surface 10 is over 2 surfaces surface 13 is over 2 surfaces surface 15 is over 2 surfaces surface 19 is over 2 surfaces surface 20 is over 2 surfaces surface 22 is over 2 surfaces surface 26 is over 2 surfaces surface 27 is over 2 surfaces surface 28 is over 2 surfaces Problem with lines: 1 2 3 124 123 122 130 Problem with surfaces: 1 2 3 5 9 10 13 15 19 20 22 26 27 28 is there a described way to fix these problems? thx for helping martin -------------- next part -------------- An embedded message was scrubbed... From: MArtin Koske <... [GiDlist] generating surface mesh from stl new
Send by: Adrià Melendo Dear Martin, Maybe a Geometry->Edit->Collapse->Model could help you but it seems that the problem comes from stl file that you have used or in some step from mesh to surfmesh process. Also surfmesh creation it's a bit tricky, you can access to all options by "right buttons" menu (to add "right buttons", do right click on command line->Configure toolbar) Geometry->Create->SurfMesh, try with "ImproveMesh no". Anyway, if you could send me (my email is amelendo at cimne.upc.edu) your stl and the GiD file where the volume creation errors appear I could tell you the right answer. Regards, Adrià ________________________________ AVISO IMPORTANTE Los datos de carácter personal facilitados están registrados en un fichero con la finalidad de facilitar la gestión de las comunicaciones de CIMNE. Puede ejercitar los derechos de acceso, rectificación, cancelación y oposición mediante petición dirigiéndose a nuestras oficinas en Ed. C1 Campus Norte UPC. Gran Capitán s/n Barcelona AVIS IMPORTANT Les dades de caràcter personal facilitades seran registrades en un fitxer amb la finalitat de facilitar les gestions de les comunicacions de CIMNE. Pot exercir els drets d'accés, rectificació i cancel·lació, per escrit a les nostres oficines en Ed. C1 Campus Nord UPC. Gran Capità s/n Barcelona. IMPORTANT NOTICE All personal data contained on this mail will be processed confidentially and registered in a file property of CIMNE., in order to manage corporate communications. You may exercise the rights of access, rectification, erasure and object by letter sent to Ed. C1 Campus Norte UPC. Gran Capitán s/n Barcelona. -----Mensaje original----- De: ... [GiDlist] Viewing volume mesh elements with render
Send by: Nunzio Losacco Hi everyone, I cannot see volume mesh elements in GiD preprocessor. Is that normal? I can only see the outer surfaces. I even tried with Mesh --> View mesh boundary, but it doesn't seem to work. Do you have any idea? N. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20091210/b9ca8e1d/attachment.htm [GiDlist] Viewing volume mesh elements with render
Send by: Enrique Escolano In 'render flat' or 'smooth' mode It is normal to see only the boundary (interior faces will be hidden by the boundary ones, and draw all is very expensive) In 'render normal' we draw all edges (but you can set to view mesh boundary only) In postprocess is possible to visualize this interior faces (but set transparency for some layer to see interior ones) Why do you want to draw interior faces? If do you want to have a look of the elements, you can delete some mesh part in preprocess, or you can do some cut in posprocess or separate some selection in different sets/layers Enrique ----- Original Message ----- From: Nunzio Losacco To: ... [GiDlist] Viewing volume mesh elements with render
Send by: Nunzio Losacco Hi Enrique, thanks for your quick reply. I have two long curved tunnels and I need to pick some nodes on the tunnel boundary all through its length. That is why I would like to see the boundaries of each layer (obviously the tunnels are in different layers than the surrounding soil). What I've come up so far is to generate surface meshes as well, so that I can see the tunnel outer elements, and then delete surface elements, taking care that element renumbering doesn't mess it all. Let me know if you have any other ideas, regards. N. 2009/12/10 Enrique Escolano <escolano at cimne.upc.edu... [GiDlist] Viewing volume mesh elements with render
Send by: Enrique Escolano Maybe you can apply some condition over the geometric surface (defined over surfaces and to tranfer over nodes) where you want the nodes marked, without require to generate the additional triangles (and generate a new mesh off course to have this condition transfered to the mesh) Later it is also possible as user to select entities with a filter of this condition. e.g. to send this nodes to a different layer (see menu Utilities->Tools->Selection window...) Why do you need to manually pick this nodes? (maybe you can automate your procedure) ----- Original Message ----- From: Nunzio Losacco To: gidlist at gatxan.cimne.upc.edu... [GiDlist] Problemas with GiD license
Send by: fsalazar at cimne.upc.edu Good morning. We are working in Linux Opensuse 11.1 and the password doesn't work. We had a portable USB license, so we have used it without a problem for some time. Today, we have had a power outage, and after that the usb doesn't work. We have tried the password, but it doesn't work either. Any idea? Thanks Fernando Salazar González Ingeniero de Caminos, Canales y Puertos CIMNE Paseo Gral Martínez Campos, 41, 9º Izq. Madrid 28010. Tel. +34 91 319 13 59 Tel. +34 610 234 477 Fax: +34 91 319 13 59 fsalazar at cimne.upc.edu... [GiDlist] Problemas with GiD license
Send by: russier at glvt-cnrs.fr Hello, Try the following command under root : # mount -t usbfs none /proc/bus/usb V. Russier > > Good morning. > > We are working in Linux Opensuse 11.1 and the password doesn't work. > We had a portable USB license, so we have used it without a problem > for some time. > > Today, we have had a power outage, and after that the usb doesn't > work. We have tried the password, but it doesn't work either. > > Any idea? > > Thanks > Fernando Salazar González > Ingeniero de Caminos, Canales y Puertos ... [GiDlist] Meshing problem
Send by: Thanh Chau Dinh Dear all: I am using GiD 9.0.2 and have a question related to meshing as a attached file. Can you help me with a regular mesh for a spherical hemisphere? When I increase number of elements on each side of the surface I did not get a good meshing as I want. Do you know what is a problem? Do you have any advices? Thank you in advance and I am looking forward to hearing from you. Chau Dinh Thanh -------------- next part -------------- An HTML attachment was scrubbed... URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20091228/94195a0a/attachment.htm... [GiDlist] Meshing problem
Send by: Enrique Escolano It is a problem with the shape of the surface, maybe the boundary line doesn't lie on the surface with enougth precision and there is a big gap between them. Delete this surface and create again by revolution. If you are not able to solve your problem, send us the GiD model. Regards Enrique Escolano ----- Original Message ----- From: Thanh Chau Dinh To: GiDlist at gatxan.cimne.upc.edu Sent: Monday, December 28, 2009 9:48 AM Subject: [GiDlist] Meshing problem Dear all: I am using GiD 9.0.2 and have a question related to meshing as a attached file. Can you help me with a regular mesh for a spherical hemisphere? When I increase number of elements on each side of the surface I did not get a good meshing as I want. Do you know what is a problem? Do you have any advices? Thank you in advance and I am looking forward to hearing from you. Chau Dinh Thanh -------------- next part -------------- An HTML attachment was scrubbed... URL: ... [GiDlist] Meshing problem
Send by: Thanh Chau Dinh Dear: Can you please tell me how to create a surface by revolution in GiD? To mesh a 3D structure in GiD I am a novice. I created the surface from Object->Sphere and modified it by dividing and cutting. In fact, with this surface I obtained a good mesh with 32 elements for each side but did not as number of elements > 32. I attached the gid file here. Please help me and thank you in advance. Regards, Chau Dinh Thanh On Mon, Dec 28, 2009 at 7:51 PM, Enrique Escolano <escolano at cimne.upc.edu>wrote: > It is a problem with the shape of the surface, maybe the boundary line ... [GiDlist] Meshing problem
Send by: Enrique Escolano You can create a new surface copying the line 25 with a transformation of revolution around an axe defined for example by the coordinates (0,0,0) and (0,0,1) of 90 degrees, and extruding a surface. To do it go to menu Utilities->Copy... select "Lines" as source entity type, Transformation=Rotation and axe coordinates points (0,0,0) to (0,0,1) select "duplicate entities" to force to create the entities also if exist an old entity in the same location and DoExtrude=Surfaces Then click "Select" and pick the line 25 (or enter "25" in the command line to select it) as source to be revolved Then you can delete the old surface, and its lines and points We will study your surface in more detail to fix the problems. Regards Enrique ----- Original Message ----- From: Thanh Chau Dinh To: ... [GiDlist] Meshing problem
Send by: Thanh Chau Dinh Dear: Thank you for your help. I learned a useful option for creating 3D surface. By the way, I would like to ask a question I posted before but have not yet received any reply. Please help me if you can. While I use Color Fill option to view results for a 8-node quadrilateral by Natural coordinate of Gauss point given I just saw color at each Gauss points not color fill as usual. This problem occurs as I use 4x4 Gauss points but does not as I use 2x2 Gauss points. Can you help me to fix this trouble to have true color fill over whole elements? I attach here the project files, including project.flavia.res created by myself. Thank you in advance and I am looking forward to hearing from you. Best, Chau Dinh Thanh On Tue, Dec 29, 2009 at 12:54 AM, Enrique Escolano <... [GiDlist] HAPPY NEW YEAR 2010
Send by: Villy S HAPPY NEW YEAR 2010 TO ALL OF YOU.. WITH GREAT SUCCESS AND WONDERFUL HAPPINESS GID TEAM Prof. Onate, as my supervisor while I was in CIMNE 1999 and the rest Best Wishes ________________________________ From: Enrique Escolano <escolano at cimne.upc.edu> To: gidlist at gatxan.cimne.upc.edu Sent: Mon, December 28, 2009 5:51:56 PM Subject: Re: [GiDlist] Meshing problem It is a problem with the shape of the surface, maybe the boundary line doesn't lie on the surface with enougth precision and there is a big gap between them. Delete this surface and create again by revolution. If you are not able to solve your problem, send us the GiD model. Regards Enrique Escolano ----- Original Message ----- >... |
