Hi everyone,
I found why the surface meshing was giving me problems:
Rfast doesn't mesh curved quadratical elements with curved sides, while Rsurf is ok.
In case of triangles everything is fine.
Is this a bug?
kind regards
Andrea Calaon
Ashurst Lodge, Ashurst
Southampton, Hampshire
SO40 7AA, UK
Tel. office: +44 23 80 293 223
Fax office: +44 23 80 292 853
Mobile: +44 7766 488 225
E-mail: andrea at beasy.com
[GiDlist] Quadratic mesh problem solved
Moderator: GiD Team
[GiDlist] Quadratic mesh problem solved
All my tests with GiD 7.4.9b for Widows works ok for quadratic triangles and
quadrilaterals. With all meshers.
Enrique Escolano
----- Original Message -----
From: "Andrea Calaon" andrea at beasy.com
To: gidlist at gatxan.cimne.upc.es
Sent: Friday, October 15, 2004 5:19 PM
Subject: [GiDlist] Quadratic mesh problem solved
Hi everyone,
I found why the surface meshing was giving me problems:
Rfast doesn't mesh curved quadratical elements with curved sides, while
Rsurf is ok.
In case of triangles everything is fine.
Is this a bug?
kind regards
Andrea Calaon
Ashurst Lodge, Ashurst
Southampton, Hampshire
SO40 7AA, UK
Tel. office: +44 23 80 293 223
Fax office: +44 23 80 292 853
Mobile: +44 7766 488 225
E-mail: andrea at beasy.com
_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist
quadrilaterals. With all meshers.
Enrique Escolano
----- Original Message -----
From: "Andrea Calaon" andrea at beasy.com
To: gidlist at gatxan.cimne.upc.es
Sent: Friday, October 15, 2004 5:19 PM
Subject: [GiDlist] Quadratic mesh problem solved
Hi everyone,
I found why the surface meshing was giving me problems:
Rfast doesn't mesh curved quadratical elements with curved sides, while
Rsurf is ok.
In case of triangles everything is fine.
Is this a bug?
kind regards
Andrea Calaon
Ashurst Lodge, Ashurst
Southampton, Hampshire
SO40 7AA, UK
Tel. office: +44 23 80 293 223
Fax office: +44 23 80 292 853
Mobile: +44 7766 488 225
E-mail: andrea at beasy.com
_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist
[GiDlist] Quadratic mesh problem solved
Do you get quadrilaterals with curved sides using Rfast?
My problem is that using Rfast the sides of quadrilaterals on curved surface boundaries
are linear and not quadratic. Triangles are fine (have curved sides).
I mesh only surfaces surrounging volumes, which on the other hand don't get meshed.
Andrea
On 18 Oct 2004 at 16:39, Enrique Escolano wrote:
All my tests with GiD 7.4.9b for Widows works ok for quadratic triangles and
quadrilaterals. With all meshers.
Enrique Escolano
----- Original Message -----
From: "Andrea Calaon" andrea at beasy.com
To: gidlist at gatxan.cimne.upc.es
Sent: Friday, October 15, 2004 5:19 PM
Subject: [GiDlist] Quadratic mesh problem solved
My problem is that using Rfast the sides of quadrilaterals on curved surface boundaries
are linear and not quadratic. Triangles are fine (have curved sides).
I mesh only surfaces surrounging volumes, which on the other hand don't get meshed.
Andrea
On 18 Oct 2004 at 16:39, Enrique Escolano wrote:
All my tests with GiD 7.4.9b for Widows works ok for quadratic triangles and
quadrilaterals. With all meshers.
Enrique Escolano
----- Original Message -----
From: "Andrea Calaon" andrea at beasy.com
To: gidlist at gatxan.cimne.upc.es
Sent: Friday, October 15, 2004 5:19 PM
Subject: [GiDlist] Quadratic mesh problem solved